The Project Gutenberg eBook of Navies of the world This ebook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this ebook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook. Title: Navies of the world Author: Edward W. Very Release date: September 12, 2024 [eBook #74406] Language: English Original publication: New York: John Wiley & Sons, 1880 Credits: deaurider and the Online Distributed Proofreading Team at https://www.pgdp.net (This file was produced from images generously made available by The Internet Archive) *** START OF THE PROJECT GUTENBERG EBOOK NAVIES OF THE WORLD *** Transcriber’s Notes: Underscores “_” before and after a word or phrase indicate _italics_ in the original text. Equal signs “=” before and after a word or phrase indicate =bold= in the original text. Small capitals have been converted to SOLID capitals. Illustrations have been moved so they do not break up paragraphs. Old or antiquated spellings have been preserved. Typographical and punctuation errors have been silently corrected. NAVIES of THE WORLD; GIVING CONCISE DESCRIPTIONS OF THE PLANS, ARMAMENT AND ARMOR OF THE NAVAL VESSELS OF TWENTY OF THE PRINCIPAL NATIONS. TOGETHER WITH THE _LATEST DEVELOPMENTS IN ORDNANCE, TORPEDOES, AND NAVAL ARCHITECTURE_, AND A CONCISE SUMMARY OF THE PRINCIPAL NAVAL BATTLES OF THE LAST TWENTY YEARS, 1860-1880. BY LIEUT. EDWARD W. VERY, U.S.N. NEW YORK: JOHN WILEY & SONS, 15 ASTOR PLACE. 1880. COPYRIGHTED, 1880, BY JOHN WILEY & SON. PREFACE During the past twenty years the changes in the “matériel” of which fleets are composed have been so rapid and universal that it has been impossible at any time to form a true estimate of the strength of the navy of any maritime power that would be of any value beyond a very limited time. With displacements advancing from 5000 to 13,000 tons; weight and power of ordnance developing beyond the most exaggerated conceptions of twenty years ago; torpedo warfare springing into existence and developing as a new and special arm; modifications in engines and boilers by which speed has been developed from 12 to 18 knots, and steaming capacity from 2500 to 6000 miles; the revolution of naval tactics, and the entire change in the conditions of naval warfare brought about by the development of armor defence and the ram attack,—it is only through paying the closest attention and under exceptionally favorable circumstances that naval officers have been able to comprehend the magnitude of the general result. It is only within the past two years that the craze for naval development has subsided to a slow and steady advance, and the present time has been seized upon as one favorable for measuring the actual strength and resources of the navies of the world. In preparing this work the author has simply aimed at representing in as detailed a manner as possible all the elements which go to make up the active naval strength, leaving to those who in their search for information may have recourse to the data herein presented to estimate the values of these elements as they are developed and combined in different navies, and to judge for themselves of the true value of the results obtained. In collecting this data the greatest care has been taken to only give such as is entirely authentic. For the most part it has come from official sources, and, wherever it has been necessary to make comparisons or to give opinions, the writer has in no case given his own independent ideas on the subject. The principal authorities, aside from official records, whose works have been consulted are: Reed, White, Dislere, Marchal, and De St. Bon, on Naval Architecture; Owens, Mayevski, Sebert, Müller, and Cooke, on Ordnance; Schleeman and Stotherd, on Torpedoes; and Von Billerbeck, on the iron-clads of the first decade. EDWARD W. VERY, _Lieutenant U. S. Navy_. WASHINGTON, June, 1880. CONTENTS. PAGE PART I.—FLEETS 1 Argentine Confederation, Austria, Brazil, Chili, China, Denmark, England (Armored Fleet, Unarmored Fast Cruisers), France (Armored Fleet, Unarmored Fast Cruisers), Germany, Greece, Holland, Italy, Japan, Norway and Sweden, Peru, Portugal, Russia, Spain, Turkey, United States. THE PRINCIPAL BATTLES OF TWENTY YEARS—1860-1880. _Bombardments of Earthworks._—Hatteras Inlet, Hilton Head, Fort Henry, Roanoke Island, Fort Donelson, Fort Darling, Fort Hindman, Grand Gulf, Simonoseki, Kagosima, Fort Wagner, Fort McAllister, Fort Fisher, Danube Forts, Callao. _Bombardments of Masonry Forts._—Fort Sumter, Forts Jackson and St. Philip. _Passages of Forts._—Forts Jackson and St. Philip, Vicksburg Earthworks, Port Hudson Earthworks, Fort Morgan, Vicksburg Earthworks (second time). _Assaults._—Fort Sumter, Fort Fisher, Korean Forts. _Deliberate General Actions._—Memphis, Helgoland, Lissa. _Dashes._—Passages of the Mississippi, Vicksburg, Charleston. _Iron-Clads against Wooden Vessels._—Hampton Roads, Roanoke River, Albemarle Sound, Black Sea, Ylo Bay, Iquique Harbor. _Duels._—Monitor and Merrimac; Alabama and Hatteras; Weehawken and Atlanta; Kearsarge and Alabama; Meteor and Bouvet; Almirante Cochrane, Blanco Encalada, and Huascar. PART II.—NAVAL ORDNANCE 175 _Austria._—Tables of Weight and Measurement. Uchatius Construction. _Argentine Confederation, Brazil, Chili, China, Denmark_ _England._—Tables of Weight and Measurement. Woolwich Guns, Armstrong Guns. Gun-Carriages. Gunpowder. Cartridges. Projectiles. Fuses. Primers. Sights. _Palliser Construction_, _Whitworth Construction_, _Vavasseur Construction_. _France._—Tables of Weight and Measurement. Guns. Carriages. Gunpowder Cartridges. Projectiles. Fuses. Primers. Sights. Accessories. _Germany._—Tables of Weight and Measurement. Guns. Carriages, Gunpowder Projectiles. Fuses. _Italy._—Tables of Weight and Measurement. Guns. _Greece, Holland, Japan._ _Sweden and Norway._—Tables of Weight and Measurement. Guns. _Nordenfelt Machine-Gun_, _Palmcrantz Machine-Gun_. _Russia._—Tables of Weight and Measurement. Guns. _Peru, Portugal, Spain, Turkey._ _United States._—Tables of Weight and Measurement. Guns. Carriages. Gunpowder. Projectiles. Fuses. Sights. Accessories. _Hotchkiss Machine-Gun_, _Gatling Machine-Gun_. _Small-Arms._—Snider, Tabatière, Krnka, Springfield, Peabody-Martini, Werndl, Mauser, Le Gras (Chassepot), Berdan, Remington, Hotchkiss Magazine. Recapitulatory Table of Naval Ordnance. Penetration Tables. PART III.—TORPEDOES 323 Whitehead, Lay, Harvey, Menzing, French Towing, American Spar-Torpedo. _Torpedo Vessels_—Pietro Micca, Ran, Ziethen, Vesuvius, Uzreef, Alarm, Intrepid, Destroyer, Uhlan. _Torpedo Boats_—Thornycroft, Yarrow, Herreshoff; Ship’s Boats; Submarine Boats. Drifting Torpedoes. Defences against Torpedoes. _Defensive Torpedoes_—Frame Torpedo, Brooks’s Torpedo, Singer’s Torpedo, Barrel Torpedo. Torpedo Fuses. Clearing Channels of Torpedoes. Actions with Torpedoes during twenty years. PART IV.—ARCHITECTURE AND CONSTRUCTION 355 Architectural Development of the Unarmored Fleet; Chart of the Architectural Development. Constructional Development of the Unarmored Fleet—Wooden Construction, Diagonal Construction, Composite Construction, Iron Construction, Iron Sheathed with Wood. Architectural Development of Armored Vessels. Ratios of the Principal Elements of Iron-clad Vessels to their Displacement. PART V.—PERSONNEL; BUDGETS 397 Argentine Republic, Austria, Brazil, Chili, England, France, Germany, Holland, Italy, Japan, Norway and Sweden, Russia, Spain, Turkey, United States, Denmark, Greece, Peru, Portugal. Table of Budgets of Sixteen Navies, from 1875 to 1880. PART I. FLEETS. ARGENTINE. ARGENTINE CONFEDERATION IRON-CLADS. A = Length between Perpendiculars. B = Breadth of Beam. C = Draft. D = Displacement. E = Indicated Horse-power. F = Maximum Speed. G = Armor. H = Backing. ============+===+===+====+=====+===+=====+===+===+=================== | | | | | | | | | TYPE AND | A | B | C | D | E | F | G | H | BATTERY. NAME. | | | | | | | | | ------------+---+---+----+-----+---+-----+---+---+------------------- Single- |Ft.|Ft.| Ft.|Tons.| |Knots|In.|Ft.| turreted | | | | | | | | | Monitors.| | | | | | | | | El Plata |165| 44|10½ |1,800|750| 12 |5½ |12 |II 9-inch Armstrong El Andes |165| 44|10½ |1,800|750| 12 |5½ |12 |II 9-inch ” ------------+---+---+----+-----+---+-----+---+---+------------------- GENERAL-SERVICE FLEET. ==================+===============+======= TYPE AND NAME. | Displacement. | Guns. ------------------+---------------+------- | Tons. | Iron Corvettes. | | Parana | 800 | 4 Uruguay | 800 | 2 ------------------+---------------+------- Iron Screw | | Gun-boats. | | Constitucion | 750 | 1 Republica | 750 | 1 Bermejo | 750 | 1 Pilcomayo | 750 | 1 ------------------+---------------+------- Gun-boats. | | Almirante Brown | 1,000 | 6 Vigilante | 400 | 1 Resguando | 400 | 1 Coronel Paz | 700 | 3 Pavon | 600 | 2 Gualeguaz | 300 | 1 ------------------+---------------+------- Paddle Gun-boats. | | Luisita | 120 | 1 Choelechoel | 120 | 1 Gonzalo | 150 | 1 Rio Negro | 220 | 1 ------------------+---------------+------- Torpedo vessels. Thorneycroft. ----------------------------------------- EL PLATA. EL ANDES. High-sided ram monitors. Armored belt, casemate, and single turrets. Ram bow and round stern. Twin screws and half sail-power. (See Buffel, Dutch.) PARANA. URUGUAY. Iron, second-class corvettes, sheathed with wood, carrying two 6½-inch pivots amidships, two 20-pdrs. in broadside, and a light forecastle gun. Covered poop and forecastle. Bridge just forward of the main mast. Single screw, full sail-power. [Illustration] CONSTITUCION. REPUBLICA. BERMEJO. PILCOMAYO. Iron, double-screw, second-class gun-boats, carrying one 12-inch gun firing through a bow-port. (See Alpha, Chinese.) AUSTRIA. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Construction Material. F = Greatest thickness of Armor. ---------------+-----+-----+-------+-------+------+----- | | | | | | | | | | | | TYPE AND | A | B | C | D | E | F NAME. | | | | | | | | | | | | ---------------+-----+-----+-------+-------+------+----- | Ft. | Ft. |Ft. in.| Tons. | | In. | | | | | | Redoubt | | | | | | Frigates. | | | | | | Tegetthoff | 287 | 71 | 26 7 | 7,300 | Iron | 14½ Custoza | 302 | 58 | 25 10 | 7,060 | ” | 9 Erzherzog | 276 | 54 | 23 3 | 5,940 | ” | 8 Albrecht | | | | | | ---------------+-----+-----+-------+-------+------+----- Casemate | | | | | | Frigates. | | | | | | Lissa | 275 | 55 | 28 2 | 6,080 | Wood | 6¼ Kaiser | 264 | 59 | 25 8 | 5,810 | ” | 6¼ Don Juan | 222 | 44 | 22 6 | 3,550 | Iron | 8 Kaiser Max | 222 | 44 | 22 6 | 3,550 | ” | 8 Prinz Eugen | 222 | 44 | 22 6 | 3,550 | ” | 8 ---------------+-----+-----+-------+-------+------+----- Broadside | | | | | | Frigates. | | | | | | Ferdinand Max| 253 | 51 | 24 10 | 5,140 | Wood | 5 Hapsburg | 253 | 51 | 24 10 | 5,140 | ” | 5 Salamander | 197 | 44 | 21 3 | 3,110 | ” | 4¾ ---------------+-----+-----+-------+-------+------+----- Monitors. | | | | | | Maros | 160 | 27 | 3 6 | 310 | Iron | 2 Leitha | 160 | 27 | 3 6 | 310 | ” | 2 ---------------+-----+-----+-------+-------+------+----- Spalato |Experimental single-turreted citadel ship ---------------+-----+-----+-------+-------+------+----- G = Backing. H = Indicated Horse-power. I = Maximum Speed. J = Date of Launch. ---------------+-----+-------+-----+-------+-------------------------- | | | | | | | | | | TYPE AND | G | H | I | J | BATTERY. NAME. | | | | | | | | | | ---------------+-----+-------+-----+-------+-------------------------- | In. | |Knots| Year | ---------------+-----+-----+-------+-------+------+----- Redoubt | | | | | Frigates. | | | | | Tegetthoff | 10 | 7,200 | 14 | 1878 | VI 11-inch Krupp. Custoza | 7 | 4,650 | 14 | 1872 | VIII 10-inch ” Erzherzog | 8 | 4,000 | 13½ | 1872 | VIII 9-inch ” Albrecht | | | | | ---------------+-----+-----+-------+-------+------+----- Casemate | | | | | Frigates. | | | | | Lissa | 28 | 3,700 | 13½ | 1869 | XII 9-inch ” Kaiser | 29 | 3,130 | 12½ | 1871 | X 9-inch Armstrong. Don Juan | 8 | 2,900 | 13 | 1875 | VIII 8¼-inch Krupp. Kaiser Max | 8 | 2,866 | 13¼ | 1875 | VIII 8¼-inch ” Prinz Eugen | 8 | 2,900 | 13 | 1876 | VIII 8¼-inch ” ---------------+-----+-----+-------+-------+------+----- Broadside | | | | | Frigates. | | | | | Ferdinand Max| 26 | 2,912 | 12½ | 1865 | XIV 7-inch Armstrong. Hapsburg | 26 | 3,090 | 12½ | 1865 | XIV 7-inch ” Salamander | 23½ | 2,060 | 11½ | 1861 | X 7-inch ” ---------------+-----+-----+-------+-------+------+----- Monitors. | | | | | Maros | 8 | 320 | 8½ | 1871 | II 5¾-inch Wahrendorf. Leitha | 8 | 320 | 8½ | 1871 | II 5¾-inch ” ---------------+-----+-----+-------+-------+------+----- Spalato | | II 17-inch Armstrong. ---------------+-----+-----+-------+-------+------+----- TEGETTHOFF. Partial armored belt and long redoubt. Ram bow, straight overhanging stern. The armored belt encircles the water-line aft and as far forward as the commencement of the bow-frames, where it ends in an armored bulkhead, the lower edge being carried forward in a heavy steel deck, the thickness of the belt being carried out to the bow with cork filling. The belt rises to the height of the main-deck beams. The redoubt has an overhang of five feet, being cut back in the wake of the centre-ports as a protection to the muzzles of the guns. The corners are cut and hollowed for angular ports, giving bow and beam fire. The sides are given a rank tumble home forward and abaft the redoubt, to open the fore-and-aft fire. An armored pilot-house rises well above the spar-deck rail at the forward end of the redoubt. A heavily armored athwartship bulkhead crosses the redoubt just abaft the forward guns as a protection from raking fire. Three-quarter sail-power, barkentine rig, single screw. [Illustration: TEGETTHOFF.] CUSTOZA. ERZHERZOG ALBRECHT. Armored belt and _double-decked_ casemate; ram bow, round overhanging stern, single screw, full sail-power. The armored belt encircles the water-line to the height of the main-deck beams, the casemate rising sheer to the top of the spar-deck rail. Forward, the side is carried back from the main-deck up, parallel to the keel, to open bow-fire from the forward guns. Aft, the side is recessed for the upper deck alone. Stern-fire is secured from a single unprotected heavy spar-deck rifle working in three ports for stern and beam fire. The Albrecht has 1200 tons less displacement than the Custoza, with a lighter battery and a speed one half knot less. The casemate guns each work in two ports for fore-and-aft and beam fire. [Illustration: CUSTOZA.] LISSA. KAISER. Armored belt, casemate, and spar-deck redoubt. Ram bow, round overhanging stern, single screw, full sail-power. The belt encircles the ship to the height of the main-deck beams. There is no fore-and-aft fire from the casemate, that being secured by an upper-deck redoubt mounted on the forward end of the casemate and having an overhang of about five feet. (See Sultan’s spar-deck redoubt.) Mixed construction, the armored part of the hull being of wood and the unarmored upper works of iron. DON JUAN. KAISER MAX. PRINZ EUGEN. Armored belt and casemate, ram bow, round overhanging stern, single screw, full sail-power. The belt encircles the water-line to the height of the main-deck beams, coming down forward in a curve over the point of the ram. The casemate rises to the spar-deck beams. The side forward on the main-deck is recessed to open forward fire from the casemate. No after-fire from the casemate, that being secured by unprotected light stern-guns. These ships are rebuilt from broadside iron-clads. [Illustration: DON JUAN.] FERDINAND MAX. HAPSBURG. SALAMANDER. Broadside frigates; ram bow, round stern, single screw, full sail-power. The armor is complete from below the water-line to the spar-deck beams, coming down forward in steps, below the point of the ram, to give a heavy support and a strong junction between the wooden hull and the armor. Armored pilot-house just abaft the main-mast. There is a light armored traverse forward, forming the forward part of the spar-deck rail and protecting a bow-gun working in two large bow-ports for fore-and-aft and beam fire. The Ferdinand Max is the frigate that sank the Re d’Italia by ramming at the battle of Lissa. [Illustration: FERDINAND MAX.] MAROS. LEITHA. Single-turreted, light-draft river monitors. The freeboard is 38 inches amidships and 20 inches forward and abaft, the deck being curved fore and aft. The turret is revolved by hand, having on top of it an armored pilot-house. The weakness in the hull armor is made up by sinking the ship when going into action until only the amidship part is out of water. The bow and stern ends are completely unarmored. SPALATO (LATE DRACHE). Originally a sister-ship to the Salamander; now being rebuilt as a citadel ship on the general plan of the Inflexible, but to carry one turret armed with two 17-inch rifles. AUSTRIAN GENERAL-SERVICE FLEET. -----------------------+---------------+------ TYPE AND NAME. | Displacement. | Guns. | Tons. | -----------------------+---------------+------ Frigates. | | Radetzky | 3,380 | 15 Laudon | 3,380 | 15 -----------------------+---------------+------ Corvettes. | | Donau | 2,400 | 11 Saida | 2,400 | 11 Dandolo | 1,690 | 14 Erzherzog Friedrich | 1,540 | 14 Fasana | 1,940 | 4 Helgoland | 1,790 | 5 Zrinyi | 1,320 | 4 Frundsberg | 1,320 | 4 Aurora | 1,320 | 4 -----------------------+---------------+------ Gun-boat. | | Dalmat | 886 | 4 -----------------------+---------------+------ Screw Gun-boats. | | Hun | 886 | 4 Zara | 815 | 2 Exp. Gun-boat | 640 | 2 Nautilus | 560 | 2 Albatros | 560 | 2 Kerka | 530 | 2 Narenta | 530 | 2 Sansego | 344 | 2 Möve | 364 | 2 -----------------------+---------------+------ Paddle Gun-boats. | | Miramar | 1,800 | 2 Elisabeth | 1,540 | 5 Garguano | 1,855 | 2 Triest | 885 | 2 Andreas Hofer | 816 | 3 Taurus | 560 | 3 Triton | 177 | 2 -----------------------+---------------+------ Yachts. | | Greif | 1,330 | 2 Fantasie | 325 | -----------------------+---------------+------ Transports. | | Pola | 895 | 2 Cyclop | 2,115 | 2 -----------------------+---------------+------ Tenders. | | Grille | 354 | 2 Gemse | 354 | 2 Alnoch | 177 | Thurn Taxis | 118 | Gorzkowski | 40 | -----------------------+---------------+------ School-ships. Guard-ships. Hulks. Store-ships. Thorneycroft torpedo-boats rigged for Whitehead torpedoes. BRAZIL. ARMORED FLEET. A = Backing. B = Displacement. C = Construction Material. ------------------+-----------------+-----+-------+-------+------ | Thickness of | | | | | Armor. | | | | TYPE AND NAME. +-----------------+ A | B | Mean | C | Light. | Heavy. | | | Draft.| ------------------+--------+--------+-----+-------+-------+------ | Inches | Inches | Ft. | Tons. | Ft.In.| Turret Ships. Sete de Setembro | | | | | 15 4 | Iron Solimoës | 6 | 12 | 10 | 3,660 | 11 6 | ” Javari | 6 | 12 | 10 | 3,660 | 11 6 | ” Lima Barros | 3 | 4.5 | 8 | 1,330 | 13 5 | ” Silvado | 3 | 4.5 | 9 | 1,130 | 10 6 | ” Bahia | 2.75 | 4.5 | 11 | 964 | 8 6 | ” ------------------+--------+--------+-----+-------+-------+------ Casemate Ships. Tamandaré | 2.5 | 4 | 25 | 964 | 7 9 | Wood Barrozo | 2.5 | 4.5 | 25 | 964 | 8 5 | ” Cabral | 2.75 | 4.5 | 8 | 1,016 | 11 5 | Iron Colombo | 2.75 | 4.5 | 8 | 1,016 | 12 1 | ” Herval | 2.75 | 4.5 | 8.5| 787 | 9 6 | ” Mariz é Barros | 2.75 | 4.5 | 8.5| 787 | 9 6 | ” Brazil | 2.75 | 4.5 | 8.5| 1,493 | 12 5 | ” ------------------+--------+--------+-----+-------+-------+------ River Monitors. Alagoas | 2 | 4.5 | 14.5| 334 | 4 11 | Wood Pará | 2 | 4.5 | 14.5| 334 | 4 11 | ” Rio Grande | 2 | 4.5 | 14.5| 334 | 4 11 | ” Santa Catarina | 2 | 4.5 | 14.5| 334 | 4 11 | ” Ceara | 2 | 4.5 | 14.5| 334 | 4 11 | ” Pianhy | 2 | 4.5 | 14.5| 334 | 4 11 | ” ------------------+--------+--------+-----+-------+-------+------ D = Maximum Speed. E = Date of Launch. ------------------+---------+-------+-----+------------------------- | | | | | | | | Type and Name. | Horse- | D | E | BATTERY. | power. | | | ------------------+---------+-------+-----+------------------------- | | Knots.|Year.| ------------------+---------+-------+-----+------------------------- Turret Ships. |Nominal | | | Sete de Setembro| 300 | |1876 | IV 9¼-inch Whitworth. +---------+-------+-----+------------------------- |Indicated| | | Solimoës |2,200 | 11 |1875 | IV 10¼-inch ” +---------+-------+-----+------------------------- |Indicated| | | Javari |1,685 | 11 |1875 | IV 10-¼-inch ” +---------+-------+-----+------------------------- |Nominal | | | Lima Barros | 300 | 12 |1866 | IV 7-inch ” +---------+-------+-----+------------------------- Silvado | 200 | 11 |1866 | IV 5.8-inch ” Bahia | 140 | 10.5 |1865 | II 7-inch ” ------------------+---------+-------+-----+------------------------- Casemate Ships. Tamandaré | 80 | 8.5 |1865 | III 68-pdr. smooth-bore. | | | | I 5.8-inch ” +---------+-------+-----+------------------------- | | | | III 4.7-inch ” Barrozo | 130 | 9 |1864 | II 7-inch ” | | | | II 68-pdr. +---------+-------+-----+------------------------- Cabral | 240 | 10.5 |1864 | II 5.8-inch Whitworth. | | | | IV 68-pdr. smooth-bore. +---------+-------+-----+------------------------- Colombo | 240 | 10.5 |1864 |VIII 68-pdr. ” Herval | 200 | 9 |1865 | IV 7-inch Whitworth. +---------+-------+-----+------------------------- Mariz é Barros | 200 | 9 |1865 | II 7-inch ” | | | | II 68-pdr. smooth-bore. +---------+-------+-----+------------------------- Brazil | 250 | 11.5 |1865 | IV 7-inch Whitworth. | | | | IV 68-pdr. smooth-bore. ------------------+---------+-------+-----+------------------------- River Monitors. | | | | Alagoas | 30 | 7.5 |1864 | I 5.8-inch Whitworth. Pará | 30 | 7.5 |1864 | I 5.8-inch ” Rio Grande | 30 | 7.5 |1864 | I 5.8-inch ” Santa Catarina | 30 | 7.5 |1864 | I 7-inch ” Ceara | 30 | 7.5 |1864 | I 7-inch ” Pianhy | 30 | 7.5 |1864 | I 7-inch ” ------------------+---------+-------+-----+------------------------- SOLIMÖES. JAVARI. [Illustration: SOLIMÖES.] Double-turreted, low-freeboard monitors of the American type. No overhang. Twin screws. Guns loaded by hydraulic apparatus outside the turrets. No port stoppers or shutters. Magazines and shell-rooms under the turrets. Pilot-house just abaft the forward turret. Flying deck communicating with the lower deck by a musket-proof passage, and armed with two 9-pdr. Whitworth rifles and two Gatling guns for defence against torpedo-boats. Armor of decreasing thickness at bow and stern. Boats stow on the flying deck without davits, being hoisted in and out by a derrick and the signal-mast. Water-closets and bath-rooms on the flying deck. LIMA BARROS. SILVADO. BAHIA. Double-turreted, high freeboard vessels with a drop rail; three-quarter sail-power. (See Prinz Hendrik, Dutch.) The Silvado is unseaworthy. BRAZIL. [Illustration: BRAZIL.] Armored belt and casemate; ram bow, round stern. The belt encircles the water-line to the height of the upper deck. The casemate springs up sheer from the upper deck with ports in all four faces for all-around fire. There is no direct communication between the forward and after parts of the vessel except through the casemate ports. Single screw, full sail-power. CABRAL. COLOMBO. Similar to the Brazil, but smaller. In these vessels the casemate is divided into two sections by the engine, which projects into it. TAMANDARE. BARROSO. Similar to the Brazil, but smaller and having no fore-and-aft fire at all. THE SIX RIVER MONITORS. Single-turreted, light-draft river monitors, the turrets being square and mounted on turn-tables. BRAZILIAN WOODEN FLEET. (Steam.) -------------------------+-------- | TYPE AND NAME. | Guns. | -------------------------+-------- Screw Frigate. | Amazonas | 14 -------------------------+-------- Corvettes. | Nictheroy | 14 Trajano | 3 Vital do Oliveira | 6 Magé | 8 Belmonte | 3 -------------------------+-------- Paddle Corvette | Paraense | 4 -------------------------+-------- Screw Gun-boats. | Araguary | 3 Pedro Affonso | 1 Forte de Coimbra | 1 Ypiranga | 2 -------------------------+-------- Paddle-wheel Gun-boats. | Henrique Diaz | 1 Vidal de Negreiros | 1 Greenhalgh | 2 Taquary | 4 Henrique Martins | 2 Felippe Camarão | 1 -------------------------+-------- Tenders. | Bonifacio | 2 Braconnot | 1 Apa | 1 Moema | 2 Lamego | 1 Antonio João | 2 Corumba | 2 -------------------------+-------- Paddle-wheel Transports. | Madeira | Punes | Leopoldina | Werneck | -------------------------+-------+ CHILI. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Construction Material. F = Armor. ----------------------+---+---+---+-----+----+------- TYPE AND NAME. | A | B | C | D | E | F | | | | | | ----------------------+---+---+---+-----+----+------- |Ft.|Ft.|Ft.| Tons| |Inches. Armored Frigates. | | | | | | Almirante Cochrane |179|46 |20 |3,430|Iron| 9 Blanco Encalada |179|46 |20 |3,430| ” | 9 ----------------------+---+---+---+-----+----+------- Turret Ship. | | | | | | Huascar |196|35 |15½|1,800| ” | 5½ ----------------------+---+---+---+-----+----+------- G = Backing. H = Indicated Horse-power. I = Maximum Speed. J = Date of Launch. ----------------------+----+-----+-----+----+----------------------- TYPE AND NAME. | G | H | I | J | BATTERY. | | | | | ----------------------+----+-----+-----+----+----------------------- | Ft.| |Knots|Year| Armored Frigates. | | | | | Almirante Cochrane | 9¼ |3,000| 13 |1874| VI 9-inch,. | | | | | II 20-pdr. Armstrong +----+-----+-----+----+----------------------- Blanco Encalada | 9¼ |3,000| 13 |1875| VI 9-inch, | | | | | II 20-pdr. ” ----------------------+----+-----+-----+----+----------------------- Turret Ship. | | | | | Huascar | 4½ |1,500| 11 |1864| II 9-inch, | | | | | III 4½-inch ” ----------------------+----+-----+-----+----+----------------------- CHILIAN GENERAL-SERVICE FLEET. --------------------+---------------+------ TYPE AND NAME. | Displacement. | Guns. --------------------+---------------+------ | Tons. | | | Corvettes. | | O’Higgins | 1,083 | 7 Chacabuco | 1,083 | 7 Magellanes | 760 | 4 --------------------+---------------+------ Paddle Gun-boats. | | Abtao | 1,034 | 5 Valdivia | 726 | 3 Ancud | 490 | 1 Independencia | 348 | 2 Tolten | 286 | 2 --------------------+---------------+------ Tender. | | Covadonga | 395 | 2 --------------------+---------------+------ ALMIRANTE COCHRANE. BLANCO ENCALADA. Armored belt and redoubt, ram bow, round stern, twin screws, three-quarter sail-power. The armored belt encloses the water-line to the height of the main-deck beams. The redoubt is crenelated, the after-part having an overhang of about five feet, thus giving clear forward fire to the first two pairs of guns. The ship’s side forward and abaft the redoubt is given a rank tumble home to open the fire. Clear, flush upper deck. [Illustration: ALMIRANTE COCHRANE.] HUASCAR. [Illustration: HUASCAR.] Sea-going turret vessel. Swan-breasted ram bow, pointed stern, single screw, three-quarter sail-power. Armored belt encircling the water-line to the height of the upper-deck beams. Tripod fore-mast with the single turret just abaft it. No direct bow-fire on account of a topgallant forecastle, and no direct stern-fire from the turret owing to a poop-cabin. Light, unprotected poop-guns secure fire in this direction. Drop-rail in wake of the turret. Armored pilot-house just abaft turret. (Captured in 1879 from the Peruvians.) CHINA. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Indicated Horse-power. F = Maximum Speed. ----------------+---+---+----+----+---+-----+--------------------- | | | | | | | TYPE AND NAME. | A | B | C | D | E | F | BATTERY. | | | | | | | ----------------+---+---+----+----+---+-----+--------------------- 2 Frigates. | | | | | | | 13 Light River | | | | | | | Gun-boats. | | | | | | | |Ft.|Ft.| Ft.|Tons| |Knots| River Gun-boats.| | | | | | | Alpha |118| 27| 9 | 325|300| 9 | I 11-inch Armstrong. Beta |118| 27| 9 | 325|300| 9 | I 11-inch ” Gamma |120| 30| 9 | 400|340| 9 | I 12½-inch ” Delta |120| 30| 9 | 400|340| 9 | I 12½-inch ” Chin Pei |125| 29|10½ | 440|389| 10 | I 12-inch ” Chin Shan |125| 29|10½ | 440|389| 10 | I 12-inch Vavasseur. Fu Shing |125| 29|10½ | 440|389| 10 | I 12-inch ” Lung Lang |125| 29|10½ | 440|389| 10 | I 12-inch ” ----------------+---+---+----+----+---+-----+--------------------- Torpedo-boats. Transports. Junks. Hulks. Guard- and School-Ships. RIVER GUN-BOATS. Iron, twin-screw gun-boats, carrying one heavy gun firing through a musket-proof bow-port. Hydraulic loading apparatus underneath the covered forecastle. Magazine and shell-rooms under the gun, with side-hatches and railways for transporting the ammunition to the muzzle. Bridge across the after-part of the high musket-proof rail, with steering-wheel just abaft it and so low as only to permit the helmsman’s head to come above the rail. After-rail low, with a musket-proof booby-hatch over the engine-room. [Illustration: ALPHA.] DENMARK. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Construction Material. F = Greatest thickness of Armor. G = Backing. ---------------+-----+----+-----+-------+----+-----+---- | | | | | | | TYPE AND NAME. | A | B | C | D | E | F | G | | | | | | | ---------------+-----+----+-----+-------+----+-----+---- | Ft. | Ft.| Ft. | Tons | | In. | In. Frigates. | | | | | | | Danmark | 269 | 49 | 19½ | 4,665 |Iron| 5 | 18 Peder Skram | 225 | 49 | 22 | 3,325 |Wood| 5 | 26 ---------------+-----+----+-----+-------+----+-----+---- Monitors. | | | | | | | Rolf Krake | 185 | 38 | 10½ | 1,325 |Iron| 4½ | 9 Lindormen | 216 | 39 | 14¾ | 2,050 | ” | 5½ | 9¾ Gorm | 232 | 40 | 15 | 2,310 | ” | 8 | 9¾ ---------------+-----+----+-----+-------+----+-----+---- Casemate Ships.| | | | | | | Helgoland | 257 | 59 | 19 | 5,350 | ” | 12½ | 10 Odin | 237 | 48 | 16½ | 3,040 | ” | 8 | 10 ---------------+-----+----+-----+-------+----+-----+---- Iron-clad | | | | | | | Gun-boats. | | | | | | | Ingolf | 150 | 26 | 13 | 850 | ” | 2½ | Absalon | 135 | 25 | 12 | 520 | ” | 2½ | Esbern Snare| 135 | 25 | 12 | 520 | ” | 2½ | Fylla | 140 | 25½| 12 | 550 | ” | 2½ | Diana | 140 | 25½| 12 | 550 | ” | 2½ | ---------------+-----+----+-----+-------+----+-----+---- H = Indicated Horse-power. I = Maximum Speed. J = Date of Launch. ---------------+-------+------+-------+-------------------------- | | | | Type and Name. | H | I | J | BATTERY. | | | | ---------------+-------+------+-------+-------------------------- | |Knots | Year | Frigates. | | | | Danmark | 1,007 | 8.1 | 1864 | XII 8-inch Armstrong. | | | | XII 36-pdr. smooth-bore. +-------+------+-------+-------------------------- Peder Skram | 1,680 | 11.7 | 1864 | VIII 8-inch Armstrong. | | | | VIII 36-pdr. smooth-bore. ---------------+-------+------+-------+-------------------------- Monitors. | | | | Rolf Krake | 750 | 7.8 | 1863 | II 8-inch Armstrong. Lindormen | 1,560 | 12 | 1868 | II 9-inch ” Gorm | 1,670 | 12.2 | 1870 | II 10¼-inch ” ---------------+-------+------+-------+-------------------------- Casemate Ships.| | | | | | | | I 12-inch Krupp. Helgoland | 3,700 | 13 | 1878 | IV 10¼-inch ” | | | | V 5¾-inch ” +-------+------+-------+-------------------------- Odin | 2,260 | 12.4 | 1872 | IV 10¼-inch ” ---------------+-------+------+-------+-------------------------- Iron-clad | | | | Gun-boats. | | | | Ingolf | 700 | 13 | 1867 | III 8-inch Armstrong. Absalon | 700 | 13 | 1869 | III ” ” Esbern Snare| 700 | 13 | 1869 | III ” ” Fylla | 700 | 13 | 1869 | III ” ” Diana | 700 | 13 | 1869 | III ” ” ---------------+-------+------+-------+-------------------------- DANISH UNARMORED FLEET. ===============+===============+====== TYPE AND NAME. | Displacement. | Guns. ---------------+---------------+------ | Tons. | Frigates. | | Niels Juel | 2,350 | 26 Själland | 2,350 | 26 Jylland | 2,420 | 26 ---------------+---------------+------ Corvettes. | | Heimdal | 1,175 | 14 Dagmar | 1,176 | 14 St. Thomas | 1,546 | 5 ---------------+---------------+------ Gun-boats. | | Falster | 350 | 1 Möen | 350 | 1 Öresund | 240 | 1 Storebelt | 240 | 1 Lillebelt | 240 | 1 Thure | 145 | 2 Schröedersee | 145 | 2 Willemöes | 145 | 2 Krieger | 145 | 2 Marstrand | 145 | 2 Hauch | 95 | 1 Drogden | 50 | 1 ---------------+---------------+------ DANMARK. PEDER SKRAM. Broadside iron-clad frigates (See Ferdinand Max, Austrian), still capable of forming part of cruising fleet, but of little use beyond harbor defence. ROLF KRAKE. Monitor gun-boat, having a superstructure forming a covered forecastle forward and officers quarters aft, the upper line of the superstructure being carried along by a rail in wake of the turrets, which may be dropped in action. Her turrets are small, containing one gun each and capable of being turned by hand or by steam (Coles system). The armored belt comes to the height of the deck-beams, and the deck is convex, plated with ¾-inch steel. An armored pilot-house is placed well aft. She has full sail-power. [Illustration: ROLF KRAKE.] LINDORMEN. GORM. Single-turreted, breastwork, light-draft monitors. (See Buffel, Dutch.) HELGOLAND. Casemated iron-clad frigate with complete armored belt. No bow or stern fire from the casemate, which carries four 10¼-inch Krupp rifles. Forward on the upper deck is placed a 12-inch Krupp pivot for bow and beam fire. Her armor at the water-line is 12 inches, diminishing to 6 at the bow and stern. She is provided with apparatus for discharging Whitehead torpedoes from each beam above water. ODIN. Armored belt with elevated casemate. (See Brazil, Brazilian.) The casemate contains four 10¼-inch Armstrong muzzle-loaders, each of which fires from two ports. She has no spars except signal-masts. INGOLF. ABSALON. ESBERN SNARE. FYLLA. DIANA. Armored gun-boats, having fine lines and an armored belt from two feet below the water-line to the deck-beams. Three unprotected pivot-guns working amidships on centre-pivot carriages and firing over the rail. Full sail-power and hoisting screw. [Illustration: INGOLF.] The wooden fleet is of the ordinary type of old-style steam corvettes and gun-boats. ENGLAND. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Construction Material. F = Greatest thickness of Armor. ------------------+------+------+------+------+--------+----- | A | B | C | D | E | F TYPE AND NAME. | | | | | | |Ft.in.|Ft.in.|Ft.in.| Tons.| | In. ------------------+------+------+------+------+--------+----- Armored Frigates. | | | | | | Warrior |380 |58 |26 5 | 9,681| Iron | 4½ +------+------+------+------+--------+----- Black Prince |380 |58 |27 | 9,681| ” | 4½ +------+------+------+------+--------+----- Achilles |383 |58 |27 4 | 9,681| ” | 4½ +------+------+------+------+--------+----- Northumberland |400 |59 5 |27 |10,395| ” | 5½ +------+------+------+------+--------+----- Defence |280 |54 |25 6 | 6,074| ” | 4½ +------+------+------+------+--------+----- Resistance |280 |54 |26 | 6,074| ” | 4½ +------+------+------+------+--------+----- Hector |280 |56 5 |25 7 | 6,960| ” | 4½ +------+------+------+------+--------+----- Valiant |280 |56 5 |26 10 | 6,420| ” | 4½ +------+------+------+------+--------+----- Lord Warden |280 |58 9 |26 | 7,675| Wood | 7 Repulse |252 |59 |26 2 | 6,190| ” | 5 ------------------+------+------+------+------+--------+----- Casemate Ships. | | | | | | Agincourt |400 |59 5 |27 |10,395| Iron | 5½ Minotaur |400 |59 5 |27 |10,395| ” | 5½ +------+------+------+------+--------+----- Bellerophon |300 |56 |26 | 7,540| ” | 7½ +------+------+------+------+--------+----- Swiftsure |280 |55 |26 2 | 6,660| Iron | 9¼ | | | | |sheathed| +------+------+------+------+--------+----- Triumph |280 |55 |26 2 | 6,660| ” | 9¼ +------+------+------+------+--------+----- Audacious |280 |54 |28 | 6,084| ” | 9¼ +------+------+------+------+--------+---- Invincible |280 |54 |23 | 6,034| ” | 9¼ +------+------+------+------+--------+---- Iron Duke |280 |54 |23 | 6,034| ” | 9¼ +------+------+------+------+--------+---- Hercules |325 |59 |26 5 | 8,700| Iron |11 +------+------+------+------+--------+---- Sultan |325 |59 |27 6 | 9,286| ” |10½ +------+------+------+------+--------+---- Alexandra |325 |63 8 |26 6 | 9,492| ” |13½ +------+------+------+------+--------+---- Temeraire |285 |62 2 |27 1 | 8,412| ” |12½ +------+------+------+------+--------+---- Superb |333 |59 |25 | 8,994| ” |13½ ------------------+------+------+------+------+--------+---- Armored | | | | | | Water-line. | | | | | | Shannon |260 |54 |22 6 | 5,108| ” |10½ Nelson |280 |60 |24 2 | 7,323| ” |10½ +------+------+------+------+--------+---- Northampton |280 |60 |24 2 | 7,323| ” |10½ ------------------+------+------+------+------+--------+---- Turret Ships for | | | | | | Coast Defence. | | | | | | Prince Albert |240 |48 1 |19 8 | 3,900| ” | 5 Scorpion |224 6|42 4 |16 3 | 2,777| ” | 5 Wyvern |224 6|42 4 |15 8 | 2,725| ” | 5 Cyclops |225 |45 |16 5 | 3,430| ” | 9¼ Gorgon |225 |45 |16 5 | 3,430| ” | 9¼ Hecate |225 |45 |16 5 | 3,430| ” | 9¼ Hydra |225 |45 |16 5 | 3,430| ” | 9¼ Glatton |245 |54 |19 | 4,912| ” |13½ ------------------+------+------+------+------+--------+---- Sea-going | | | | | | Turret Ships. | | | | | | Monarch |320 |57 6 |26 | 8,322| ” | 8½ +------+------+------+------+--------+---- Devastation |285 |62 3 |26 3 | 9,157| ” |13½ +------+------+------+------+--------+---- Thunderer |285 |62 3 |26 3 | 9,157| ” |13½ +------+------+------+------+--------+---- Neptune |300 |63 |25 2 | 8,900| Iron |13½ | | | | |sheathed| +------+------+------+------+--------+---- Dreadnought |320 |63 10 |27 |10,886| Iron |15⅜ Ajax |260 |66 |24 | 8,492| ” |19½ Agamemnon |260 |66 |24 | 8,492| ” |19½ Inflexible |320 |75 |25 4 |11,500| ” |24 Conqueror | | | | | | Orion |245 |52 |19 6 | 4,700| ” |13½ Bellisle |245 |52 |19 6 | 4,700| ” |13½ ------------------+------+------+------+------+--------+---- Armored | | | | | | Corvettes. | | | | | | Pallas |225 |50 |24 3 | 3,797| Wood | 5 +------+------+------+------+--------+---- Penelope |260 |50 |17 4 | 4,394| Iron | 6 +------+------+------+------+--------+---- Research |195 |38 6 |15 5 | 1,780| Wood | 5 ------------------+------+------+------+------+--------+---- Rams. | | | | | | ------------------+------+------+------+------+--------+---- Hotspur |235 |50 |20 8 | 4,012| Iron | 12 +------+------+------+------+--------+---- Rupert |250 |53 |23 6 | 5,358| ” | 9⅞ ------------------+------+------+------+------+--------+---- Gun-boats. | | | | | | Viper |160 |32 |11 7½| 1,220| ” | 5 Vixen |160 |32 |11 7½| 1,220| ” | 5 Waterwitch |162 |32 1 |11 9 | 1,279| ” | 5 ------------------+------+------+------+------+--------+---- Colonial | | | | | | Turret Ships. | | | | | | Abyssinia |225 |42 |14 | 2,901| ” | 7 Magdala |225 |45 |14 8 | 3,344| ” | 8 Cerberus |225 |45 |14 8 | 3,344| ” | 8 ------------------+------+------+------+------+--------+---- Floating | | | | | | Battery. | | | | | | Erebus | | | | 1,814| ” | 4½ Ram. | | | | | | Polyphemus |240 |40 | | 2,660| ” | ------------------+------+------+------+------+--------+---- G = Least thickness of Armor H = Backing. I = Indicated Horse-power. J = Maximum Speed. ------------------+-----+-----+-----+-----+---------------------- | G | H | I | J | TYPE AND NAME. | | | | |BATTERY. | In. | In. | |Knots| ------------------+-----+-----+-----+-----+---------------------- Armored Frigates. | | | | | Warrior | 4½ | 18 |5,469| 14.3| VIII 8-inch Woolwich. | | | | | XXIV 7-inch ” +-----+-----+-----+-----+----------------------- Black Prince | 4½ | 18 |5,772| 13.6| VIII 8-inch ” | | | | | XX 7-inch ” +-----+-----+-----+-----+-------------------- Achilles | 3 | 18 |5,722| 14.3| XIV 9-inch ” | | | | | II 8-inch ” +-----+-----+-----+-----+-------------------- Northumberland | 3 | 9 |6,558| 14.1| VII 9-inch ” | | | | | XX 8-inch ” +-----+-----+-----+-----+-------------------- Defence | 4½ | 18 |2,437| 11.6| II 8-inch ” | | | | | XIV 7-inch ” +-----+-----+-----+-----+-------------------- Resistance | 4½ | 18 |2,428| 11.6| II 8-inch ” | | | | | XIV 7-inch ” +-----+-----+-----+-----+-------------------- Hector | 3 | 18 |3,256| 12.5| IV 8-inch ” | | | | | XIV 7-inch ” +-----+-----+-----+-----+-------------------- Valiant | 3 | 18 |3,560| 12.5| IV 8-inch ” | | | | | XIV 7-inch ” +-----+-----+-----+-----+-------------------- Lord Warden | 4 | 31 |6,706| 13.5|XVIII 7-inch ” Repulse | 4 | 30½|3,347| 12.2| XII 8-inch ” ------------------+-----+-----+-----+-----+-------------------- Casemate Ships. | | | | | Agincourt | 3 | 9 |6,867| 15.4| XVII 9-inch ” Minotaur | 3 | 9 |6,702| 14.4| XVII 9-inch ” ------------------+-----+-----+-----+-----+-------------------- Bellerophon | 5 | 9¾|6,521| 14.1| X 9-inch ” | | | | | V 7-inch ” ------------------+-----+-----+-----+-----+-------------------- Swiftsure | 4 | 9¾|4,913| 13.5| X 9-inch ” | | | | | IV 64-pdr. ” ------------------+-----+-----+-----+-----+-------------------- Triumph | 4 | 9¾|4,892| 13.5| X 9-inch ” | | | | | IV 64-pdr. ” ------------------+-----+-----+-----+-----+-------------------- Audacious | 4 | 9¾|4,021| 12.8| X 9-inch ” | | | | | IV 64-pdr. ” ------------------+-----+-----+-----+-----+-------------------- Invincible | 4 | 9¾ |4,832| 14 | X 9-inch. ” | | | | | IV 64-pdr. ” ------------------+-----+-----+-----+-----+-------------------- Iron Duke | 4 | 9¾ |4,268| 13.6| X 9-inch ” | | | | | IV 64-pdr. ” ------------------+-----+-----+-----+-----+-------------------- Hercules | 6 | 9¾ |7,200| 13.2| VIII 10-inch ” | | | | | II 9-inch ” ------------------+-----+-----+-----+-----+-------------------- Sultan | 6 | 9¾ |8,629| 14.1| IV 7-inch ” | | | | | VIII 10-inch ” ------------------+-----+-----+-----+-----+-------------------- Alexandra | 6 | 9¾ |8,615| 15 | II 12-inch ” | | | | | X 10-inch ” ------------------+-----+-----+-----+-----+-------------------- Temeraire | 7 | 9¾ |7,700| 14.6| IV 12-inch ” | | | | | IV 10-inch ” ------------------+-----+-----+-----+-----+-------------------- Superb | 7 | 11.8|7,430| 13.8| XII 10-inch ” | | | | | IV 7-inch ” ------------------+-----+-----+-----+-----+-------------------- Armored | | | | | Water-line. | | | | | Shannon | 6 | 9¾ |3,370| 12.6| II 10-inch ” | | | | | VII 9-inch ” Nelson | 6 | 9¾ |6,000| 14 | IV 10-inch ” | | | | | VIII 9-inch ” ------------------+-----+-----+-----+-----+-------------------- Northampton | 6 | 9¾ |6,000| 14 | IV 10-inch ” | | | | | VIII 9-inch ” ------------------+-----+-----+-----+-----+-------------------- Turret Ships for | | | | | Coast Defence. | | | | | Prince Albert | 4½ | 18 |2,128| 11.6| IV 9-inch ” Scorpion | 4½ | 9 |1,450| 10.2| IV 9-inch ” Wyvern | 4½ | 9 |1,450| 10.2| IV 9-inch ” Cyclops | 5 | 9¾ |1,660| 11 | IV 10-inch ” Gorgon | 5 | 9¾ |1,669| 11 | IV 10-inch ” Hecate | 5 | 9¾ |1,755| 11 | IV 10-inch ” Hydra | 5 | 9¾ |1,472| 11 | IV 10-inch ” Glatton | 9 | 18 |2,868| 12.1| II 12-inch ” ------------------+-----+-----+-----+-----+-------------------- Sea-going | | | | | Turret Ships. | | | | | | | | | | IV 12-inch ” Monarch | 5 | 11¾ |7,842| 14.9| II 9-inch ” | | | | | I 7-inch ” ------------------+-----+-----+-----+-----+-------------------- Devastation | 8½ | 18 |6,652| 13.8| IV 12-inch ” ------------------+-----+-----+-----+-----+-------------------- Thunderer | 8½ | 18 |6,270| 13.4| II 12½ inch ” | | | | | II 12-inch ” ------------------+-----+-----+-----+-----+-------------------- Neptune | 7 | 9¾ |9,100| 14.6| IV 12½-inch ” | | | | | II 7-inch ” ------------------+-----+-----+-----+-----+-------------------- Dreadnought | 7 | 18 |8,000| 14 | IV 12½-inch ” Ajax | 11 | 18 |6,000| 13 | IV 12½-inch ” Agamemnon | 11 | 18 |6,000| 13 | IV 12½-inch ” Inflexible | 18 | 18 |8,000| 14 | IV 16-inch ” Conqueror | | | | | IV 17 inch Armstrong. Orion | 6 | 9¾ |3,900| 13 | IV 12-inch ” Bellisle | 6 | 9¾ |3,955| 13 | IV 12-inch ” ------------------+-----+-----+-----+-----+-------------------- Armored | | | | | Corvettes. | | | | | | | | | | IV 8-inch ” Pallas | 3 | 22 |3,581| 13.4| II 64-pdr. ” | | | | | II 40-pdr. ” ------------------+-----+-----+-----+-----+-------------------- Penelope | 3 | 9¾ |4,703| 12.8| III 40-pdr. ” | | | | | VIII 8-inch Woolwich. ------------------+-----+-----+-----+-----+-------------------- Research | 3 | 19¾ |1,042| 10.3| IV 7-inch ” ------------------+-----+-----+-----+-----+-------------------- Rams. | | | | | ------------------+-----+-----+-----+-----+-------------------- Hotspur | 6 | 11⅞ |3,497| 12.6| I 12-inch ” | | | | | II 64-pdr. ” ------------------+-----+-----+-----+-----+-------------------- Rupert | 6 | 11⅞ |4,635| 12.4| II 64-pdr. ” | | | | | II 10-inch ” ------------------+-----+-----+-----+-----+-------------------- Gun-boats. | | | | | Viper | 3 | 6 | 696| 9 | IV 7-inch ” Vixen | 3 | 6 | 740| 9 | IV 7-inch ” Waterwitch | 3 | 6 | 777| 9.2| IV 7-inch ” ------------------+-----+-----+-----+-----+-------------------- Colonial | | | | | Turret Ships. | | | | | Abyssinia | 4½ | |1,200| 9.6| IV 10-inch ” Magdala | 5 | 9 |1,400| 9.7| IV 10-inch ” Cerberus | 5 | 9 |1,400| 9.7| IV 10-inch ” ------------------+-----+-----+-----+-----+-------------------- Floating | | | | | Battery. | | | | | Erebus | 4⅜ | 24 | 493| 6.0| XVI 64-pdr. ” Ram. | | | | | Polyphemus | | |5,500| | ------------------+-----+-----+-----+-----+-------------------- WARRIOR. BLACK PRINCE. DEFENCE. RESISTANCE. Armored broadside frigates. The armor of these ships consists of a long casemate covering the battery only, and extending from about two feet below the water-line to the spar-deck beams. The bow and stern sections are left completely unprotected, the armor forward and aft ending in athwartship bulkheads. The hull is divided into a number of very large water-tight compartments. The extreme forward part of the upper-deck rail is recessed to permit straight-ahead fire from the forecastle guns. The bows of these ships, although not built especially for ramming, are made very heavy to permit of this mode of attack with safety. Full sail-power. [Illustration: WARRIOR.] HECTOR. VALIANT. Armored broadside frigates with swan-breasted ram bows. The armor of these ships consists of a belt around the main-deck, whilst the boilers and engines are in a casemate. The water-line forward and abaft is unprotected. Full sail-power. [Illustration: VALIANT.] ACHILLES. Armored broadside frigate with straight bow strengthened for ramming. The armor of this ship consists of a water-line belt the height of the gun-deck beams and a casemate for the battery. Full sail-power. No bow-fire except from an unprotected forecastle gun. (See Warrior.) [Illustration: ACHILLES.] NORTHUMBERLAND. MINOTAUR. AGINCOURT. Armored broadside frigates, swan-breasted bow for ramming. The armor in these ships may be called complete, forming a belt rising to the height of the spar-deck beams fore and aft. Full sail-power (5 masts). [Illustration: MINOTAUR.] BELLEROPHON. REPULSE. LORD WARDEN. [Illustration: LORD WARDEN.] Armored broadside frigates with ram bows. The armor in these ships is complete, rising to the height of the spar-deck beams, and in addition having a casemated forecastle. The Lord Warden and Repulse have wooden hulls, having been originally laid down for wooden line-of-battle ships. The Bellerophon carries heavier armor and more effective backing atthe water-line than any of the foregoing ships. These ships have full sail-power. The Bellerophon is a good sailer. PALLAS. RESEARCH. Armored belt and redoubt, the side being cut back just forward and abaft the redoubt to permit the broadside guns to fire well forward and aft through adjacent ports. These ships have wooden hulls, having been originally laid down for wooden frigates. The Pallas is a remarkably fine sailing ship.[1] [Illustration: PALLAS.] [1] The Pallas and Research were sold out of service in 1880. HERCULES. SUPERB. PENELOPE. Armored belt and long armored redoubt, the sides being cut back for bow-fire. The Hercules has armored breastworks at the bow and stern on the battery-deck for heavy bow and stern-guns. The Superb is the late Memdouhieh (Turkish). [Illustration: HERCULES.] SULTAN. Armored belt and long armored redoubt. The side forward of the redoubt is cut back for forward fire, but instead of the forward and after breastworks of the Hercules, an upper redoubt is built at the after-end of the main one, projecting clear of the side, and from which clear bow and stern fire is available. [Illustration: SULTAN.] SWIFTSURE. TRIUMPH. AUDACIOUS. INVINCIBLE. IRON DUKE. [Illustration: IRON DUKE. A—Wound made in the Vanguard by the Iron Duke.] Armored belt and short casemate, on which is mounted an upper-deck redoubt. The gun-deck casemate does not permit of bow-fire, as the lines of the ship are not broken forward or abaft it. The upper redoubt projects clear of the side over the lower casemate, and has its corners cut off to permit of angular ports being cut that give fore-and-aft and beam fire. This redoubt has no athwartship bulkhead. The magazines are directly under the casemates. The boat-davits are near the amidship line, so that the boats are kept well inboard. (The Vanguard, sunk by collision with the Iron Duke, belonged to this type.) ALEXANDRA. Armored belt and double-decked casemate, ram bow, and overhanging stern. The forward part of the belt is carried down in a curve over the ram. The side forward from the gun-deck beams up is carried well back parallel to the keel to give fore-and-aft fire. There is no stern-fire from the main-deck casemate. The after bulkhead rises straight from the belt to the top of the upper casemate. This casemate is, however, shorter than the lower one, and its forward bulkhead being carried down separates the main-deck casemate into two chambers, forming a double protection for the after-guns. The corners of both casemates are cut off for angular ports to give fore-and-aft and beam fire. The hull is divided longitudinally by an armored bulkhead rising to the height of the main-deck beams, one set of engines and boilers being in each compartment. Twin screws and full sail-power. [Illustration: ALEXANDRA.] TEMERAIRE. Armored belt, redoubt, and two barbette turrets. Ram bow. The armored belt is carried down in a curve over the ram. No stern-fire from the casemate, the forward corners being cut for angular ports, and the side forward being carried back for bow-fire. The casemate is cut in two chambers similar to the main-deck casemate of the Alexandra. The barbette turrets forward and abaft the casemate are oval in shape, and the guns are mounted on Moncrieff carriages. The armor of the body of the turrets does not come below the spar-deck beams, but an armored shaft is carried down to the level of the belt, through which ammunition is passed and communication given. The hull is divided longitudinally by an armored bulkhead similar to the Alexandra. Twin screws and auxiliary sail-power. (Brig rigged.) [Illustration: TEMERAIRE.] SHANNON. [Illustration: SHANNON.] Partial armored belt and partial spar-deck breastwork. The belt is carried around the stern as a protection to the steering-gear, but ends just abaft the fore-mast in an armored bulkhead, which rises sheer to the height of the spar-deck rail. From the foot of this bulkhead an iron deck is carried forward to the stem, ending as a support to the ram. A breastwork on the spar-deck forward forms a protection for the bow-guns, the topgallant forecastle being carried to its after-edge. The corners of the breastwork are cut for angular ports, and the rail forward is carried back parallel to the keel. The rail aft is recessed and cut back for after angular ports, but the guns are not protected by armor. An armored conning tower is placed at the forward part of the breastwork. A single gun is used aft, working on a turn-table for shifting from one port to the other. NELSON. NORTHAMPTON. Partial armored belt and partial forward and after spar-deck breastworks. The armored belt extends for three fifths of the length of the ship amidships, ending in armored athwartship bulkheads, which rise to the height of the spar-deck beams. A heavy iron deck prolongs the lower edge of the belt to the bow and stern, protecting the steering-gear aft and forming a support for the ram forward. The guns are all carried on a covered deck, giving a flush spar-deck. The breastworks on the main-deck at the bulkheads form a side protection for the forward and after guns, the corners being cut for angular ports and the side recessed for fore-and-aft fire. These ships have twin screws and an armored longitudinal bulkhead similar to the Alexandra. [Illustration: NELSON.] MONARCH. NEPTUNE. Armored belt and revolving Coles turrets on the spar-deck. The belt rises to the height of the main-deck beams, and amidships is carried up to the spar-deck beams to cover the lower part of the turrets and machinery. An armored bulkhead rises well forward, forming on the spar-deck a forecastle breastwork for the bow-guns. The spar-deck rail in wake of the turrets may be dropped to open their fire. The Neptune has no protected stern-fire. The belt of the Monarch is carried up aft to the height of the spar-deck beams, forming a breastwork for the stern-guns. (See Hercules.) The Neptune is the late Independenzia. [Illustration: MONARCH.] INFLEXIBLE. AJAX. AGAMEMNON. CONQUEROR. [Illustration: INFLEXIBLE.] Casemated, double-turreted, mastless, sea-going iron-clads. Ram bows. The armored casemate is rectangular and encloses the middle third of the vessel. The lower edge of the casemate is prolonged fore and aft in a heavy iron deck, which forward curves down below the point of the ram. Short unarmored forecastle and poop structures, carried along in line with the keel to the smoke-stacks. The turrets are placed diagonally to open the full fore-and-aft fire. Forward and abaft the casemate is a cork belt of the thickness of the armor, to give the ship floating power in case the unprotected sections are pierced. The ship is divided in two by a longitudinal bulkhead. Twin screws. DREADNOUGHT. ORION. BELLEISLE. Armored belt and breastwork, sea-going monitors. The armor is complete fore and aft, and is carried down in a curve forward below the point of the ram. Throughout the middle third a casemate rises to protect the bottom of the turrets and give them a good elevation above the water-line. Forward and abaft this casemate, and in line with it, an unarmored superstructure is carried, stopping short of the bow and stern. This forms roomy quarters and gives the ship an increased freeboard and stability. The turrets are amidships and in line with the keel. Between them is a musket-proof superstructure, expanding into a flying deck having at its forward end an armored pilot-house. Longitudinal armored bulkhead, similar to the Alexandra. [Illustration: DREADNOUGHT.] DEVASTATION. THUNDERER. [Illustration: DEVASTATION.] Armored belt and breastwork, double-turreted, sea-going monitors. The armored belt from forward to the forward turret comes only to the height of the water-line. The breastwork differs from that of the Dreadnought in not coming out to the side, but the freeboard necessary is obtained by carrying around it and well forward and aft a musket-proof superstructure. A musket-proof superstructure also rises between the turrets, expanding into a flying deck with an armored pilot-house at its forward end. GLATTON. Armored belt and breastwork, single-turreted, coast-defence monitor. The armored belt rises to the upper-deck level, and is of the same thickness from stem to counter. It has an overhang beyond the hull of 2½ feet amidships. The breastwork surrounds the turret and smoke-stack and does not come out to the side. Forward and abaft a narrow superstructure carries along the line of the breastwork. Abaft the turret, which is situated well forward, a musket-proof superstructure rises, expanding into a flying deck, with an armored pilot-house at its forward extremity. [Illustration: GLATTON.] CYCLOPS. GORGON. HECATE. HYDRA. ABYSSINIA. MAGDALA. CERBERUS. [Illustration: CERBERUS.] Armored belt and breastwork, double-turreted, coast-defence monitors. The breastwork occupying somewhat more than the middle third of these vessels surrounds the turrets and smoke-stack, but does not come out to the side. Musket-proof passages or tubes and ventilators, together with an armored pilot-house, extend above a light flying deck. The Cerberus is stationed permanently at Melbourne, having had a temporary rail and upper deck built on her for her passage out. The Abyssinia and Magdala are permanently stationed at Bombay. HOTSPUR. RUPERT. Armored rams. The armor-belt completely encircles the hull and is carried down in a curve forward below the point of the ram. Each vessel is provided with a breastwork and single turret. That of the Hotspur is fixed and has four ports, the gun being worked on a turn-table. That of the Rupert is of the Coles type of revolving turret. The breastwork surrounds the foot of the turret and the smoke-stack. Both vessels have a high superstructure from abaft the turret to the stern, rising two thirds the height of the turret, and each carries a stern-gun, the side being recessed at each counter for stern-fire. The Hotspur carries an armored pilot-house on top of her turret; the Rupert has two, one on each side, abaft the turret in the dead-angle. At present the turret of the Hotspur is being changed to a revolving one like the Rupert’s. [Illustration: HOTSPUR.] PRINCE ALBERT. Four-turreted monitor. This ship has a wooden hull, having been cut down from a line-of-battle ship. Her armor-belt encircles her hull and she has no breastwork; her Coles turrets being protected about their lower parts by the armored deck. This vessel is only fit for harbor defence. SCORPION. WYVERN. Armored belt, double-turreted iron-clads with full sail-power. These vessels are high sided, the high rail between the fore and mizzen masts dropping to unmask the turrets. The armor-belt encircles them. They have strengthened ram bows, a long, high forecastle extending to the fore-mast and making a dead-angle for the forward turret, and a high poop to the mizzen-mast, making a dead-angle for the after turret. The fore and main masts are tripod masts. These vessels are bark rigged, with full sail-power, and when their side rails are up they have the appearance of ordinary corvettes. They were built for the Confederates during the war of the American Rebellion. VIPER. VIXEN. WATERWITCH. Casemated gun-boats. These vessels have rectangular casemates about the boilers and engines (see Inflexible), the forward bulkhead rising above the spar-deck level, and being provided with two ports for bow-fire. They are only intended for bow-fire and end-on attack. The Waterwitch is a double-ender, having steering-gear at each end, and at present, instead of steam boilers and engines, she has a hydraulic motor. POLYPHEMUS. Armored ram The transverse section of this ship is top-shaped, showing above water a convex upper deck surmounted by a light musket-proof superstructure. In addition to her heavy ram, she is provided with apparatus for firing the Whitehead torpedo, ahead and from each beam. EREBUS. Old-type casemated floating battery, completely armored. [Illustration: WYVERN.] ENGLISH UNARMORED FLEET. (NEW CRUISERS.) A = Length between Perpendiculars. B = Breadth of Beam. C = Mean Draft. D = Displacement. E = Construction Material. ---------------+--------+-------+-------+-----+--------- TYPE AND NAME.| A | B | C | D | E ---------------+--------+-------+-------+-----+--------- | Ft. in.| Ft.in.| Ft.in.|Tons.| Frigates. | | | | | Inconstant |333 | 50 1 | 23 7 |5,782| Iron | | | | |sheathed +--------+-------+-------+-----+--------- Shah |334 8 | 52 | 23 |6,040| ” Raleigh |298 | 49 | 22 |5,200| ” --------------+--------+-------+-------+-----+--------- Corvettes. | | | | | Boadicea | | 45 | 22 |4,027| ” Bacchante |280 | 45 | 21 7 |3,932| ” Euryalus | | 45 | 21 7 |3,982| ” +--------+-------+-------+-----+--------- Rover |280 | 43 6 | 20 2 |3,494| ” Active |270 | 42 | 20 |3,078| ” Volage |270 | 42 | 20 |3,078| ” +--------+-------+-------+-----+--------- | | | | | Steel Cleopatra |225 | 44 6 | 20 |2,383| & iron | | | | |sheathed +--------+-------+-------+-----+--------- Constance |225 | 44 6 | 20 |2,383| ” Champion |225 | 44 6 | 20 |2,383| ” Carysfort |225 | 44 6 | 20 |2,383| ” Canada. | | | | | Comus |225 | 44 6 | 20 |2,383| ” Cordelia.| | | | | Conquest |225 | 44 6 | 20 |2,383| ” Curaçao |225 | 44 6 | 20 |2,383| ” Emerald |220 | 40 | 16 3 |1,801|Composite Garnet |220 | 40 | 16 3 |1,864| ” Opal |220 | 40 | 16 3 |1,864| ” Ruby |220 | 40 | 16 3 |1,864| ” Tourmalin |220 | 40 | 16 3 |1,864| ” Turquoise |220 | 40 | 16 3 |1,864| ” Amethyst |220 | 36 | 16 |1,830| Wood Diamond |220 | 36 | 16 |1,830| ” Sapphire |220 | 36 | 16 |1,830| ” Encounter |220 | 36 | 16 |1,830| ” Modeste |220 | 36 | 16 |1,830| ” ---------------+--------+-------+-------+-----+------------- Sloops. | | | | | Cormorant |170 | 36 | 14 6 |1,124|Composite Doterel |170 | 36 | 14 6 |1,124| ” Dragon |170 | 36 | 14 6 |1,124| ” Gannet |170 | 36 | 14 6 |1,124| ” Kingfisher |170 | 36 | 14 6 |1,124| ” Miranda |170 | 36 | 14 6 |1,124| ” Osprey |170 | 36 | 14 6 |1,124| ” Pelican |170 | 36 | 14 6 |1,124| ” Pegasus |170 | 36 | 14 6 |1,124| ” Penguin |170 | 36 | 14 6 |1,124| ” Phœnix |170 | 36 | 14 6 |1,124| ” Wild Swan |170 | 36 | 14 6 |1,124| ” Albatross |160 | 31 4 | 13 | 894| ” Daring |160 | 31 4 | 13 | 894| ” Egeria |160 | 31 4 | 13 | 894| ” Fantome |160 | 31 4 | 13 | 894| ” Flying Fish|160 | 31 4 | 13 | 894| ” Sappho |160 | 31 4 | 13 | 894| ” ---------------+--------+-------+-------+-----+-------- Dispatch | | | | | Steamers. | | | | | Iris |300 | 46 | 19 9 |3,735| Steel Mercury |300 | 46 | 19 9 |3,735| ” ---------------+--------+-------+-------+-----+--------- Torpedo-ship. | | | | | Vesuvius | 90 | 22 | 8 6 | 260| Iron ---------------+--------+-------+-------+-----+--------- Torpedo-ram. | | | | | Polyphemus | | | | | ” ---------------+--------+-------+-------+-----+--------- 1st Class | | | | | Gun-boats. | | | | | Myrmidon | | | | 870| Wood Arab | | | | |Composite Condor | | | | | ” Falcon | | | | 700| ” Flamingo | | | | to | ” Griffon | | | | 774| ” Lily | | | | | ” Bittern | | | | 774| ” Bullfinch | | | | 774| ” ---------------+--------+-------+-------+-----+--------- F = Indicated Horse-power. G = Maximum Speed. H = Date of Launch. ---------------+-----+------+--------+------------------------ TYPE AND NAME.| F | G | H | BATTERY. ---------------+-----+------+--------+------------------------ | |Knots.| Year. | Frigates. | | | | Inconstant |7,361| 16.5 | 1868 | X 9-inch Woolwich. | | | | VI 7-inch ” +-----+------+--------+------------------------ | | | | X 8-inch ” Shah |7,477| 16.4 | 1875 | II 10-inch ” | | | | VI 64-pdrs. ” +-----+------+--------+------------------------ | | | | XIV 7-inch ” Raleigh |6,158| 15.2 | 1873 | II 8-inch ” | | | | VI 64-pdrs. ” ---------------+-----+------+--------+------------------------ Corvettes. | | | | Boadicea |5,130| 15.5 | 1875 | XVI 7-inch ” Bacchante |5,250| 15.3 | 1876 | XVI 7-inch ” Euryalus |5,250| 15.3 | 1875 | XVI 7-inch ” +-----+------+--------+------------------------ Rover |4,964| 14.7 | 1875 | II 7-inch ” | | | | XVI 64-pdrs. ” +-----+------+--------+------------------------ Active |4,015| 14.8 | 1869 | VI 7-inch ” | | | | IV 64-pdrs. ” +-----+------+--------+------------------------ Volage |4,532| 15.1 | 1869 | XVIII 64-pdrs. ” +-----+------+--------+------------------------ Cleopatra |2,300| 13 |Building| +-----+------+--------+------------------------ Constance |2,300| 13 | ” | Champion |2,300| 13 | ” | Carysfort |2,300| 13 | ” | II 7-inch ” Canada. | | | | Comus |2,300| 13 | ” | Cordelia.| | | | XII 64-pdrs. ” Conquest |2,300| 13 | ” | Curaçao |2,300| 13 | ” | +-----+------+--------+------------------------ Emerald |2,100| 13 | 1877 | Garnet |2,100| 13 | 1877 | Opal |2,100| 13 | 1875 | Ruby |1,830| 13 | 1876 | XII 64-pdrs. ” Tourmalin |1,900| 13 | 1876 | Turquoise |1,990| 13 | 1876 | +-----+------+--------+------------------------ Amethyst |2,127| 13 | 1873 | Diamond |2,127| 13 | to | XIV 64-pdrs. ” Sapphire |2,364| 13 | 1874 | +-----+------+--------+------------------------ Encounter |2,177| 13 | 1874 | Modeste |2,177| 13 | 1874 | ---------------+-----+------+--------+------------------------ Sloops. | | | | Cormorant | 900| 10.5 | 1877 | II 7-inch ” Doterel | 900| 10.5 | 1877 | IV 64-pdrs. ” +-----+------+--------+------------------------ Dragon |1,000| 10.5 | 1877 | Gannet |1,000| 10.5 |Building| +-----+------+--------+ Kingfisher |1,000| 10.5 | | Miranda |1,000| 10.5 | | Osprey |1,000| 10.5 | | Pelican |1,000| 10.5 | 1877 | II 7-inch, IV 64-pdrs. | | | and | Pegasus |1,000| 10.5 | 1878 | Penguin |1,000| 10.5 | | Phœnix | 760| 10.5 | | Wild Swan | 800| 10.5 | | +-----+------+--------+------------------------ Albatross | | 11 | | | 840 | | 1875 | Daring | to | 11 | and +------------------------ |1,000| | 1876 | II 7-inch, II 64-pdrs. Egeria | | 11 | | +-----+------+--------+------------------------ Fantome | | 11 | | | 840 | | 1875 | Flying Fish| to | 11 | and | II 7-inch, II 64-pdrs. |1,000| | 1876 | Sappho | | 11 | | ---------------+-----+------+--------+------------------------ Dispatch | | | | Steamers. | | | | Iris |7,750| 18.5 | 1877 | | | | | X 64-pdrs. Mercury |7,000| 18 | 1878 | ---------------+-----+------+--------+------------------------ Torpedo-ship. | | | | Vesuvius | 879| 8.9 | 1874 | None. ---------------+-----+------+--------+------------------------ Torpedo-ram. | | | | Polyphemus |5,500| 18 |Building| ---------------+-----+------+--------+------------------------ 1st Class | | | | Gun-boats. | | | | | | | | I 7-inch pivot amidships. Myrmidon | 730| 10 | 1867 | I 64-pdr. ” ” | | | | II 20-pdrs. +-----+------+--------+----------------------- Arab | 656| 11 | | Condor | 770| 11 | | Falcon | 720| 11 | 1873 | Flamingo | 750| 11 | to | I 7-inch midship pivot, Griffon | 790| 11 | 1877 | II 64-pdrs. Lily | 829| 11 | | +-----+------+--------+---------------- Bittern | 851| 10 | 1865 | | | | to | I 7-inch pivot, Bullfinch | 985| 10 | 1872 | II 40-pdrs. ---------------+-----+------+--------+---------------------------------------- A = Displacement. B = Construction Material. C = Indicated Horse-power. D = Maximum Speed. ---------------+-----+-----------+-----+-----+------------------ TYPE AND NAME. | A | B | C | D | BATTERY. ---------------+-----+-----------+-----+-----+------------------ 1ST CLASS GUN-BOATS. Low-pressure Engines. Twin Screws. |Tons.| | |Knots.| Curlew | | | 811 | | Lapwing | | | 882 | | Magpie | | | 857 | | Philomel | | | 961 | | Plover | 774 | Composite | 977 | 10 | I 7-inch pivot. Ringdove | | | 957 | | II 40-pdrs. Seagull | | | 702 | | Swallow | | | 892 | | Vulture | | | 847 | | Woodlark | | | 881 | | ---------------+-----+-----------+-----+------+------------------ 1ST CLASS GUN-BOATS. High-pressure Engines. Twin Screws. ---------------+-----+-----------+-----+------+------------------ Avon | | | 528 | | Beacon | | | 506 | | Boxer | | | 587 | | Cracker | | | 528 | | Dwarf | | | 495 | | Elk | | | 472 | | Flirt | | | 582 | | Fly | | | 489 | | Growler | 584 | Composite | 696 | 10 | II 64-pdrs. Hart | | | 608 | | II 20-pdrs. Hornet | | | 506 | | Lynx | | | 526 | | Midge | | | 472 | | Pert | | | 502 | | Rocket | | | 632 | | Teazer | | | 489 | | Thistle | | | 641 | | ---------------+-----+-----------+-----+------+------------------ Frolic | | | 896 | | Kestrel | 592 | Composite | 835 | 10 | II 64-pdrs. Ready | | | 891 | | II 20-pdrs. Rifleman | | | 715 | | ---------------+-----+-----------+-----+------+------------------ Dart | | | 336 | | Newport | 570 | Composite | 335 | 10 | II 64-pdrs. Torch | | | 281 | | II 20-pdrs. ---------------+-----+-----------+-----+------+------------------ 2D CLASS GUN-BOATS. Compound Engines. Single Screw. ---------------+-----+-----------+-----+------+------------------ Firebrand | | | | | Firefly | | | | | Firm | 45 | Composite | 360 | 9 | II 64-pdrs. Forester | | | | | II 20-pdrs. Forward | | | | | Foxhound | | | | | ---------------+-----+-----------+-----+------+------------------ Ariel | | | 540 | | Contest | | | 515 | | Coquette | | | 406 | | Cygnet | | | 532 | | Decoy | | | 459 | | Express | | | 438 | | Foam | 430 | | 406 | 10.1 | II 64-pdrs. Goshawk | to | Composite | 484 | to | II 20-pdrs. Mallard | 455 | | 398 | 10.8 | Merlin | | | 428 | | Moorhen | | | 387 | | Mosquito | | | 501 | | Sheldrake | | | 867 | | Swinger | | | 461 | | Zephyr | | | 534 | | ---------------+-----+-----------+-----+------+------------------ 2D CLASS RIVER GUN-BOATS. ---------------+-----+-----------+-----+------+------------------ Dee | | | | | Don | | | | | Esk | | | | | Medina | | | | | Medway | | | | | Sabrina | 868 | Iron | 810 | 9.5 | III 64-pdrs. Slaney | | | | | Spey | | | | | Tay | | | | | Tees | | | | | Trent | | | | | Tweed | | | | | ---------------+-----+-----------+-----+------+------------------ 2D CLASS GUN-BOATS. ---------------+-----+-----------+-----+------+------------------ Britomart | | | | | Bruiser | | | | | Cherub | | | | | Cockatrice | | | 160 | | Cromer | 330 | Wood | to | 8 | II 64-pdrs. Heron | | | 277 | | Netley | | | | | Orwell | | | | | Speedy | | | | | Tyrian | | | | | ---------------+-----+-----------+-----+------+------------------ Dapper | | | | | Earnest | | | | | Fervent | | | 140 | | Skylark | 284 | Wood | to | 8 | II 64-pdrs. Thrasher | | | 272 | | Whiting | | | | | ---------------+-----+-----------+-----+------+------------------ Ant | | | | | Arrow | | | | | Badger | | | | | Blazer | | | | | Bloodhound | | | | | Bonita | | | | | Bulldog | | | | | Bustard | | | | | Cornet | | | 168 | | Cuckoo | 254 | Iron | to | 9 | I 10-inch. Fidget | | | 268 | | Gadfly | | | | | Griper | | | | | Hyena | | | | | Kite | | | | | Mastiff | | | | | Pickle | | | | | Pike | | | | | ---------------+-----+-----------+-----+------+------------------ Pincher | | | | | Scourge | | | | | Snake | | | 168 | | Snap | 254 | Iron | to | 8 | I 10-inch. Tickler | | | 268 | | Weazel | | | | | ---------------+-----+-----------+-----+------+------------------ Hunter | 249 | Wood | 131 | 8 | II 64-pdrs. Plucky | 196 | Iron | 224 | | I 9-inch. Staunch | 180 | ” | 134 | | I 9-inch. ---------------+-----+-----------+-----+------+------------------ INCONSTANT. Iron frigate sheathed with wood and coppered. Straight bow, round stern. Rail cut back on each side of the bow-sprit to permit bow-fire. Gun-deck battery composed of ten 9-inch rifles in broadside, the ports being very widely spaced. Long topgallant forecastle and flush aft. Spar-deck battery composed of six 7-inch rifles. One bow-gun under the forecastle working in four ports (one each side ahead and one each side abeam), the gun being transported from one to another by turn-tables. One stern-gun working on turn-tables in three ports (one astern and one on each quarter). The remaining four guns are arranged as pivots, so that all may be used on one side if desirable. They secure in pairs amidships. The ports for these guns are cut in pairs forward and abaft the gun-deck ports. The strength of fire of this ship is: ahead, one 7-inch; abeam, six 7-inch, five 9-inch; astern, one 7-inch. The stability of this ship being originally deficient, part of her double bottom was filled with 180 tons of cement, thus reducing her estimated speed nearly one knot. Her coal supply permits steaming 2160 miles at a speed of ten knots. Greatest speed attained at sea for twenty-four consecutive hours, 15½ knots. SHAH. RALEIGH. Iron frigates sheathed with wood and coppered. General type similar to the Inconstant. The gun-deck battery of the Shah is a broadside one of sixteen 7-inch rifles and two 64-pdrs., the latter being just forward of the cabin bulkhead (separated from the main battery). The spar-deck battery consists of one 10-inch rifle under the topgallant forecastle, working in the same manner as the Inconstant’s; one 10-inch rifle stern-gun working in two ports, the quarter-rail being recessed for the purpose, so as to get stern and beam fire; six 64-pdrs. in broadside (two forward and two abaft the gun-deck battery, and two abreast the after smoke-stack). The Raleigh’s battery is similar to the Shah’s in arrangement, but is smaller in number. (Fourteen guns on gun-deck; six on spar-deck.) [Illustration: SHAH.] BOADICEA. BACCHANTE. EURYALUS. Iron-sheathed frigates of the same general type as the above. The battery is all under cover; the broadside battery being entirely on the gun-deck, the bow-gun under the topgallant forecastle, and the stern-gun in the spar-deck cabin. The Boadicea has a straight stem, the other two ram bows. In order to permit the latter arrangement the wood sheathing was covered with zinc in place of copper, to allow of direct connection with the iron ram without danger of galvanic action. ROVER. ACTIVE. VOLAGE. First-class corvettes, iron sheathed with wood. Of the same general type as the Inconstant, except that the battery is all carried on the spar-deck. Strength of fire: Ahead—Rover and Active, one 7-inch; Volage, one 64-pdr. Abeam—Rover, two 7-inch, eight 64-pdrs.; Active, three 7-inch, two 64-pdrs.; Volage, ten 64-pdrs. Astern—Rover and Active, one 7-inch; Volage, one 64-pdr. All other corvettes of the new type carry their batteries on the spar-deck and are of the same general type, differing only in engines and boilers and the material of the hull. CLEOPATRA CLASS (nine in number). First-class steel corvettes, sheathed with wood. Bow and stern-guns, 7-inch rifles; broadside, twelve 64-pdrs.; beam-fire, two 7-inch, six 64-pdrs. AMETHYST CLASS (eleven in number). First-class composite corvettes. Six of the number form a subdivision of the class, being of later build, having about 30 tons more displacement and carrying but twelve instead of fourteen 64-pdrs. The noticeable feature with regard to this class is the recession of the spar-deck rail forward and aft to give clear bow and stern fire. Only one gun is used at either end, pivoting each side. In the case of the Amethyst class these guns are 64-pdrs., mounted on ordinary carriages. In the Cleopatra class and larger ships they are 7-inch guns, mounted on pivot carriages, which renders the working much heavier. The bow and stern-guns are both under cover; the broadside guns are on the open spar-deck. [Illustration: AMETHYST.] CORMORANT CLASS (twelve in number). Second-class composite corvettes, carrying 7-inch bow and stern-guns and 64-pdrs. in broadside. ALBATROSS CLASS (six in number). Third-class composite corvettes, carrying 64-pdr. bow and stern-guns and 7-inch broadside. These vessels are bark rigged, and carry crews of one hundred and twenty men. IRIS. MERCURY. Fast steel despatch and torpedo vessels. Their batteries consist of ten 64-pdrs. The boilers and engines take up the greater part of the space below. In addition to the battery each vessel carries four 80-feet Thorneycroft torpedo-boats fitted for launching Whitehead torpedoes. These launches are carried on a species of gallows-frame amidships, the frame being carried to the outer edge of the rail, so that the launch may be slid out over the side and lowered without trouble. In exterior appearance these vessels are not unlike fast mail packets. [Illustration: IRIS.] MYRMIDON CLASS (nineteen in number). [Illustration: MYRMIDON.] First-class composite gun-boats, carrying for bow and stern-guns 64-pdrs., and a single 7-inch centre-pivoting rifle amidships. Twelve of these gun-boats form a subdivision of the class, having about 70 tons less displacement and carrying 40-pdr. bow and stern-guns. They are bark rigged, carrying crews of about 90 men, and have a mean draft of water of about 11 feet. AVON CLASS (twenty-four in number). First-class twin-screw gun-boats, carrying 20-pdrs. for bow and stern guns, and two 64-pdrs. amidships on pivot-carriages. FIREBRAND CLASS (twenty-one in number). Second-class single-screw composite gun-boats, carrying the same battery as the Avon class. Three-masted, square-rigged forward, lifting screws, crew of 60 men, and mean draft of water 9 feet. At a speed of six knots they burn about three tons of coal per twenty-four hours. BRITOMART CLASS (sixteen in number). Second-class wooden gun-boats of the old-fashioned type, carrying two 64-pdr. pivot-guns. BLAZER CLASS (twenty-four in number). Second-class iron gun-boats, carrying one 10-inch rifle. These vessels are little more than large launches, having a bow decked over with light plates. The gun is mounted on a platform, which itself is supported on heavy screws; these screws, being revolved by steam-power, permit the gun to be lowered down into the hold when going to sea, or raised for fighting. The in-and-out tackles and ammunition gear are manipulated by a small capstan aft. These boats have double screws, and work up to a speed of 7 knots. The Staunch, which is the model from which these gun-boats were built, is smaller, and has a musket-proof shelter at the gun. The others have none. [Illustration: BLAZER.] DEE CLASS (twelve in number). Second-class iron river gun-boats, of a peculiar design. These vessels have twin screws, and are provided with a rudder at each end, the bow-rudder, with its yoke and chains, being entirely unprotected. The hull proper is very low, the side curving sharply inboard above the water-line, almost in cigar shape, to such a degree that the dead-lights slope at an angle upward of about 40°. The deck-rail springs from the upper part of this curve about two feet inside of the water-line, being waist high amidships and rising fore and aft into a curved forecastle and poop musket-proof firing-cover for the guns. Amidships are a musket-proof pilot-house and engine-room. The battery consists of two 64-pdrs. at each end under cover, and firing from four ports each, two fore and aft and two abeam. [Illustration: DEE.] VESUVIUS. Torpedo-boat. This craft, built for sudden attacks with torpedoes, is built very low in the water. The smoke-stack is bent horizontally, running along the deck. The furnace is intended to burn coke in order to suppress smoke. The steam-discharge pipes open under water. She is rigged for projecting Whitehead torpedoes. (See Torpedoes, Part III.) LIGHTNING CLASS. Fast torpedo launches, (See Torpedoes.) ENGLISH GENERAL-SERVICE FLEET (OLD-TYPE STEAM CRUISERS.) A = Displacement. B = Construction Material. C = Indicated Horse-power. D = Maximum Speed. E = Guns. ======================+=======+======+=======+=======+===== TYPE AND NAME. | A | B | C | D | E ----------------------+-------+------+-------+-------+----- | Tons. | | | Knots.| Ships of the Line. | | | | | Victoria | 6,959 | Wood | 4,191 | 12.3 | 12 Howe | 6,557 | ” | 4,524 | 13.2 | 12 Duke of Wellington | 6,071 | ” | 1,999 | 9.9 | 25 Duncan | 5,724 | ” | 2,826 | 13.2 | 31 Royal Albert | 5,637 | ” | 1,805 | 8 | Donegal | 5,481 | ” | 3,103 | 11.2 | Anson | 5,260 | ” | 3,583 | 11.8 | 11 Atlas | 5,260 | ” | 3,732 | 12 | 11 Defiance | 5,260 | ” | 3,350 | 12 | Revenge | 5,260 | ” | 2,896 | 11.7 | Royal William | 4,579 | ” | 1,763 | 9.8 | St. George | 4,579 | ” | 1,730 | 10.6 | Albion | 4,382 | ” | 1,835 | 10.5 | Rodney | 4,375 | ” | 2,246 | 11.5 | 10 Lion | 3,842 | ” | 1,732 | 9.3 | 12 ----------------------+-------+------+-------+-------+----- Frigates. | | | | | Galatea | 4,583 | ” | 2,759 | 13.2 | 26 Bristol | 4,020 | ” | 2,088 | 11.8 | 28 Glasgow | 4,020 | ” | 2,020 | 12.4 | 28 Newcastle | 4,020 | ” | 2,354 | 13.3 | 31 Undaunted | 4,020 | ” | 2,261 | 12.7 | 31 Immortalité | 3,984 | ” | 2,391 | 11.8 | 28 Topaze | 3,915 | ” | 2,538 | 11.7 | 28 Doris | 3,803 | ” | 3,005 | 12 | 24 Aurora | 3,582 | ” | 1,576 | 10.1 | 28 Narcissus | 3,548 | ” | 1,731 | 10.6 | 18 Forte | 3,456 | ” | 1,539 | 9.2 | Endymion | 3,197 | ” | 1,620 | 9.4 | 22 ----------------------+-------+------+-------+-------+----- Corvettes. | | | | | Ariadne | 4,588 | ” | 8,350 | 13 | 26 Rattlesnake | 2,431 | ” | 1,628 | 11 | 17 Woolverine | 2,431 | ” | 1,549 | 11.2 | 17 Challenger | 2,306 | ” | 1,261 | 8.6 | 8 Thalia | 2,216 | ” | 1,597 | 10.1 | 8 Juno | 2,216 | ” | 1,381 | 9.2 | 8 Charybdis | 2,187 | ” | 1,472 | 11 | 17 Pearl | 2,187 | ” | 1,390 | 11.3 | 17 Scylla | 2,187 | ” | 1,376 | 10.7 | 17 Druid | 1,870 | ” | 2,272 | 12.9 | 14 Briton | 1,870 | ” | 2,149 | 13.2 | 14 Thetis | 1,870 | ” | 2,275 | 13.4 | 14 Blanche | 1,755 | ” | 2,158 | 13.6 | 12 Danaë | 1,755 | ” | 2,089 | 13.4 | 12 Dido | 1,755 | ” | 2,518 | 13.7 | 12 Eclipse | 1,755 | ” | 1,946 | 12.1 | 12 Sirius | 1,755 | ” | 2,334 | 12.8 | 12 Spartan | 1,755 | ” | 1,988 | 12.2 | 12 Tenedos | 1,755 | ” | 2,032 | 12.7 | 12 ----------------------+-------+------+-------+-------+----- Sloops. | | | | | Daphne | 1,574 | ” | 1,927 | | 5 Dryad | 1,574 | ” | 1,464 | | 9 Nymphe | 1,574 | ” | 2,172 | | 9 Vestal | 1,574 | ” | 2,154 | | 9 Cameleon | 1,365 | ” | 702 | | 7 Rinaldo | 1,365 | ” | 752 | | 7 Alert | 1,331 | ” | 312 | | 4 Fawn | 1,045 | ” | 434 | | 4 Rapid | 913 | ” | 460 | | 3 Rosario | 913 | ” | 436 | | 3 ----------------------+-------+------+-------+-------+----- Troop-ships. | | | | | Assistance | 2,515 | Iron | 1,442 | | 2 Dromedary | 1,800 | ” | 1,640 | | 2 Humber | 2,000 | ” | 1,700 | | 2 Himalaya | 4,490 | ” | 2,609 | | 3 Orontes | 5,600 | ” | 2,569 | | 2 Simoon | 3,302 | ” | 1,576 | | 2 Tamar | 4,857 | ” | 2,171 | | 2 Crocodile | 6,211 | ” | 4,044 | | 3 Euphrates | 6,211 | ” | 3,900 | | 3 Jumna | 6,211 | ” | 3,040 | | 3 Malabar | 6,211 | ” | 4,893 | | 3 Serapis | 6,211 | ” | 4,030 | | 3 ----------------------+-------+------+-------+-------+----- Supply-ships. | | | | | Fox | 1,670 | Wood | 764 | | 2 Discovery | 1,247 | ” | 365 | | 2 Industry | 1,126 | Iron | 279 | | 2 Supply | 1,126 | ” | 265 | | 2 Wye | 1,161 | ” | 629 | | 2 ----------------------+-------+------+-------+-------+----- Paddle-wheel Despatch | | | | | Steamers. | | | | | Helicon | 985 | Wood | 1,610 | 15 | 2 Lively | 985 | ” | 1,757 | | 2 Salamis | 985 | ” | 1,440 | 14 | 2 Vigilant | 985 | ” | 1,815 | | 2 ----------------------+-------+------+-------+-------+----- Yachts. | | | | | Osborne | 1,800 | ” | 3,363 | | 2 Victoria and Albert| 2,470 | ” | 2,980 | | 2 Alberta | 370 | ” | 1,208 | | Elfin | 93 | ” | 181 | | Enchantress | 985 | ” | 1,318 | | 1 ----------------------+-------+------+-------+-------+----- Surveying Vessels. | | | | | Nassau | 877 | ” | 755 | | 4 Porcupine | 556 | ” | 285 | | 1 Sylvia | 877 | ” | 689 | | 4 ----------------------+-------+------+-------+-------+----- Torpedo Depot-ship. | | | | | Hecla | | Iron | | | 6 ----------------------+-------+------+-------+-------+----- Paddle-wheel Frigate Valorous. Corvettes Argus, Barracouta, Basilisk, Buzzard, Salamander, Sphynx, Spiteful. 9 Paddle-steamers. 88 Harbor-tugs. 177 Hulks used as school, depot, guard, hospital, coal, and store ships. Iron-clad Hulks Caledonia, Enterprise, Favorite, Lord Clyde, Ocean, Prince Consort, Royal Alfred, Royal Oak, Royal Sovereign. The General Service fleet, with the exception of the Transports and Yachts, belong to the old-fashioned types of steam cruisers. They are, however, constantly in commission as cruising vessels on home and foreign stations. FRANCE. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Construction Material. F = Greatest Thickness of Armor. ==================+=======+=======+=======+=======+======+====== TYPE AND NAME. | A | B | C | D | E | F ------------------+-------+-------+-------+-------+------+------ |Ft.in. |Ft.in. |Ft.in. | Tons. | | In. Masted Turret | | | | | | Ships. | | | | | | ------------------+-------+-------+-------+-------+------+------ Amiral Duperré |319 5 | 66 11 | 26 |10,315 | Iron | 23 Duguesclin |265 7 | 57 3 | 24 | 5,785 | ” | 11 ------------------+-------+-------+-------+-------+------+------ Casemate Ships. | | | | | | Foudroyant |371 7 | 66 5 | 24 8 | 9,630 | ” | 16.5 +-------+-------+-------+-------+------+------ Devastation |371 7 | 66 5 | 24 8 | 9,630 | ” | 16.5 +-------+-------+-------+-------+------+------ Redoubtable |330 | 66 5 | 24 11 | 8,658 | ” | 15.3 +-------+-------+-------+-------+------+------ Colbert |314 1 | 57 3 | 27 11 | 8,167 | Wood | 8.7 +-------+-------+-------+-------+------+------ Trident |314 1 | 57 3 | 27 11 | 8,164 | ” | 8.7 +-------+-------+-------+-------+------+------ Friedland |314 1 | 57 3 | 27 11 | 8,164 | ” | 9.8 +-------+-------+-------+-------+------+------ Richelieu |314 | 57 3 | 27 11 | 8,269 | ” | 8.7 +-------+-------+-------+-------+------+------ Ocean |282 10 | 57 7 | 29 2 | 7,360 | ” | 7.8 Marengo |282 10 | 57 7 | 29 2 | 7,360 | ” | 7.8 Suffren |282 10 | 57 7 | 29 2 | 7,360 | ” | 7.8 ------------------+-------+-------+-------+-------+------+------ Armored Frigates. | | | | | | Gloire |252 3 | 55 9 | 27 10 | 5,530 | ” | 4.7 ------------------+-------+-------+-------+-------+------+------ Couronne |260 | 54 3 | 25 | 5,813 | Iron | 4.7 Flandre |258 10 | 55 9 | 26 10 | 5,725 | Wood | 6 Provence |258 10 | 55 9 | 26 10 | 5,700 | ” | 6 Heroine |258 10 | 55 9 | 26 10 | 5,700 | Iron | 6 Gauloise |258 10 | 55 9 | 26 10 | 5,610 | Wood | 6 Guyenne |258 10 | 55 9 | 26 10 | 5,610 | ” | 6 Magnanime |258 10 | 55 9 | 26 10 | 5,610 | ” | 6 Savoie |258 10 | 55 9 | 26 10 | 5,610 | ” | 6 Revanche |258 10 | 55 9 | 26 10 | 5,610 | ” | 6 Surveillante |258 10 | 55 9 | 26 10 | 5,610 | ” | 6 Valeureuse |258 10 | 55 9 | 26 10 | 5,610 | ” | 6 ------------------+-------+-------+-------+-------+------+------ Corvettes. | | | | | | Bayard |230 | 45 9 | 21 | 5,785 | Iron | 9.85 Turenne |230 | 45 9 | 21 | 5,785 | ” | 9.85 Vauban |230 | 45 9 | 21 | 5,785 | ” | 9.85 ------------------+-------+-------+-------+-------+------+------ La |230 | 45 9 | 21 | 4,480 | Wood | 6 Gallissonniere | | | | | | ------------------+-------+-------+-------+-------+------+------ Casemated Corvettes. | | | | | Victorieuse |230 | 45 9 | 21 | 4,147 | ” | 6 +-------+-------+-------+-------+------+------ Triomphante |230 | 45 9 | 21 | 4,147 | ” | 6 ------------------+-------+-------+-------+-------+------+------ Alma |230 | 46 3 | 23 9 | 3,665 | ” | 6 Belliqueuese |230 | 46 3 | 23 9 | 3,410 | ” | 6 Jeanne d’Arc |230 | 46 3 | 23 9 | 3,371 | ” | 6 Thetis |230 | 46 3 | 23 9 | 3,371 | ” | 6 Armide |230 | 46 3 | 23 9 | 3,371 | ” | 6 Atalante |230 | 46 3 | 23 9 | 3,371 | ” | 6 Montcalm |230 | 46 3 | 23 9 | 3,371 | ” | 6 Reine Blanche |230 | 46 3 | 23 9 | 3,371 | ” | 6 ------------------+-------+-------+-------+-------+------+------ Coast-defence Ships. ------------------+-------+-------+-------+-------+------+------ 1st Class Rams. | | | | | | Tonnerre |241 6 | 57 9 | 21 4 | 5,495 | Iron | 14 Fulminant |241 6 | 57 9 | 21 4 | 5,495 | ” | 14 Furieux |241 6 | 57 9 | 21 4 | 5,495 | ” | 14 ------------------+-------+-------+-------+-------+------+------ Caïman | | | | | ” | Indomptable | | | | | ” | Terrible | | | | | ” | ------------------+-------+-------+-------+-------+------+------ 2d Class Rams. | | | | | | Tempete |241 6 | 57 9 | 16 9 | 4,452 | ” | 13.8 Tonnant |241 6 | 57 9 | 16 9 | 4,452 | ” | 13.8 +-------+-------+-------+-------+------+------ Vengeur |241 6 | 57 9 | 16 9 | 4,452 | ” | 13.8 ------------------+-------+-------+-------+-------+------+------ 1st Class Rams. | | | | | | Tigre |216 6 | 53 1 | 19 7½ | 3,313 | Wood | 8.6 Belier |216 6 | 53 1 | 19 7½ | 3,313 | ” | 8.6 Bouledogue |216 6 | 53 1 | 19 7½ | 3,313 | ” | 8.6 Cerbere |216 6 | 53 1 | 19 7½ | 3,313 | ” | 8.6 +-------+-------+-------+-------+------+------ Taureau |216 6 | 53 1 | 19 7½ | 3,313 | ” | 6 ---------------------------------------------------------------- Monitor. | | | | | | Onondaga |228 7 | 51 2 | 12 7½ | 2,551 | Iron | 6.7 ------------------+-------+-------+-------+-------+------+------ Armored Batteries. | | | | | | Embuscade |129 7 | 51 10 | 10 10 | 1,422 | ” | 5.5 Protectrice |129 7 | 51 10 | 10 10 | 1,422 | ” | 5.5 Imprenable |129 7 | 51 10 | 10 10 | 1,422 | ” | 5.5 Refuge |129 7 | 51 10 | 10 10 | 1,422 | ” | 5.5 ------------------+-------+-------+-------+-------+------+------ Implacable |144 4 | 48 5 | 8 8 | 1,338 | ” | 4.7 Opiniatre |144 4 | 48 5 | 8 8 | 1,338 | ” | 4.7 ------------------+-------+-------+-------+-------+------+------ Nos. 8, 9, 10, 11 | 88 7 | 29 6 | 5 7 | 280 | ” | 3.1 ------------------+-------+-------+-------+-------+------+------ G = Least Thickness of Armor. H = Backing. I = Horse-power. J = Maximum Speed. ==================+===========+======+=======+=====+============== TYPE AND NAME. | G | H | I | J |BATTERY. ------------------+-----------+------+-------+-----+-------------- | In. | In. | |Knots| Masted Turret | | | | | Ships. | | | | | ------------------+-----------+------+-------+-----+-------------- Amiral Duperré | Armored | 14 | 6,000 | | IV 13¼-inch, | only at | | | | XIV 5½-inch. |water-line +------+-------+-----+-------------- Duguesclin |and turrets| 14 | 4,100 | 14 | IV 9¼-inch, | | | | | I 7½-inch, | | | | | VI 5½-inch. ------------------+-----------+------+-------+-----+-------------- Casemate Ships. | | | | | Foudroyant | 13.7 | 12.6 | 6,000 | 14 | VI 12¼-inch | | | | | VIII 5½-inch. +-----------+------+-------+-----+-------------- Devastation | 13.7 | 12.6 | 6,000 | 14 | VI 12¼-inch, | | | | | VIII 5½-inch. +-----------+------+-------+-----+--------------- Redoubtable | 8.7 | 15 | 6,000 | 14.5| VIII 10¾-inch, | | | | | VIII 5½-inch. +-----------+------+-------+-----+--------------- Colbert | 6 | 34.5 | 4,800 | 14 | VIII 10¾-inch, | | | | | I 9¼-inch, | | | | | VI 5½-inch. +-----------+------+-------+-----+--------------- Trident | 6 | 34 | 4,800 | 14 | VIII 10¾-inch, | | | | | I 9¼-inch, | | | | | VI 5½-inch. +-----------+------+-------+-----+--------------- Friedland | 6 | 15 | 3,800 | 13.3| VIII 10¾-inch, | | | | | VIII 5½-inch. +-----------+------+-------+-----+--------------- Richelieu | 6 | 34.5 | 3,800 | 13.8| VI 10¾-inch, | | | | | V 9¼-inch. | | | | | II 5¼-inch, | | | | | X 4¾-inch. +-----------+------+-------+-----+--------------- Ocean | 6 | 32.3 | 3,878 | 13.8| IV 10¾-inch, Marengo | 6 | 32.3 | 3,673 | 13.5| IV 9¼-inch, Suffren | 6 | 32.3 | 4,181 | 14.1| VI 4¾-inch. ------------------+-----------+------+-------+-----+--------------- Armored Frigates. | | | | | Gloire | 3 | 26 | 2,537 | 12.8| VI 9¼-inch, | | | | | IV 7½-inch. ------------------+-----------+------+-------+-----+---------------- Couronne | 3 | 15 | 2,820 | 12.2| Flandre | 4 | 26 | 3,540 | 14.3| Provence | 4 | 26 | 3,500 | 13.9| Heroine | 4 | 26 | 3,143 | 12.1| Gauloise | 4 | 26 | 3,500 | 13.9| Guyenne | 4 | 26 | 3,500 | 13.9| VIII 9¼-inch, Magnanime | 4 | 26 | 3,500 | 13.9| IV 7½-inch. Savoie | 4 | 26 | 3,500 | 13.9| Revanche | 4 | 26 | 3,500 | 13.8| Surveillante | 4 | 26 | 3,500 | 13.8| Valeureuse | 4 | 26 | 3,500 | 13.8| ------------------+-----------+------+-------+-----+---------------- Corvettes. | | | | | Bayard | 7 | 15 | 3,200 | 14 | VI 9¼-inch, Turenne | 7 | 15 | 3,200 | 14 | I 7½-inch, Vauban | 7 | 15 | 3,200 | 14 | VI 5½-inch. +-----------+------+-------+-----+-------------- La | 4.7 | 26 | 2,376 | 13 | VI 9¼-inch, Gallissonniere | | | | | I 7¼-inch, | | | | | II 4¾-inch. ------------------+-----------+------+-------+-----+-------------- Casemated Corvettes.| | | | | Victorieuse | 4.7 | 26 | 2,400 | 13.2| VI 9¼-inch, | | | | | I 7½-inch, | | | | | VI 5½-inch. +-----------+------+-------+-----+-------------- Triomphante | 4.7 | 26 | 2,400 | 13.2| VI 9¼-inch, | | | | | I 7½-inch, | | | | | VI 5½-inch. +-----------+------+-------+-----+-------------- Alma | 4.7 | 26 | 1,897 | 11.8| Belliqueuese | 4.7 | 26 | 1,233 | 11.8| Jeanne d’Arc | 4.7 | 26 | 1,900 | 12.3| Thetis | 4.7 | 26 | 1,900 | 12.3| VI 7½-inch, Armide | 4.7 | 26 | 1,900 | 12 | IV 4¾-inch. Atalante | 4.7 | 26 | 1,900 | 12 | Montcalm | 4.7 | 26 | 1,900 | 12 | Reine Blanche | 4.7 | 26 | 1,900 | 12 | ------------------+-----------+------+-------+-----+-------------- Coast-defence Ships. ------------------+-----------+------+-------+-----+-------------- 1st Class Rams. | | | | | Tonnerre | 8.6 | 15.7 | 3,500 | 13.5| Fulminant | 8.6 | 15.7 | 3,500 | 13.5| II 12½-inch. Furieux | 8.6 | 15.7 | 3,500 | 13.5| +-----------+------+-------+-----+-------------- Caïman | | | | 13.5| Indomptable | | | | 13.5| VI 12½-inch. Terrible | | | | 13.5| ------------------+-----------+------+-------+-----+-------------- 2d Class Rams. | | | | | Tempete | 9.85 | 15.7 | 1,500 | 10 | II 12½-inch. Tonnant | 9.85 | 15.7 | 1,500 | 10 | +-----------+------+-------+-----+-------------- Vengeur | 9.85 | 15.7 | 1,500 | 10 | II 9¼-inch. ------------------+-----------+------+-------+-----+-------------- 1st Class Rams. | | | | | Tigre | 6.3 | 31.5 | 1,800 | 12 | Belier | 6.3 | 31.5 | 1,800 | 12 | II 9¼-inch. Bouledogue | 6.3 | 31.5 | 1,800 | 12 | Cerbere | 6.3 | 31.5 | 1,800 | 12 | +-----------+------+-------+-----+--------------- Taureau | 4.3 | 26 | 1,805 | 11.9| I 12½-inch. ------------------------------------------------------------------- Monitor. | | | | | Onondaga | 4 | 11.8 | 613 | 7 | II 9¼-inch. ------------------+-----------+------+-------+-----+--------------- Armored Batteries. | | | | | Embuscade | 4.3 | 15.7 | 440 | 8.5 | Protectrice | 4.3 | 15.7 | 440 | 8.5 | IV 7½-inch. Imprenable | 4.3 | 15.7 | 440 | 8.5 | Refuge | 4.3 | 15.7 | 440 | 8.5 | +-----------+------+-------+-----+--------------- Implacable | 4.3 | 15.7 | 490 | 6.7 | III 9¼-inch. Opiniatre | 4.3 | 15.7 | 490 | 6.7 | ------------------+-----------+------+-------+-----+--------------- Nos. 8, 9, 10, 11 | 3.1 | 13.8 | 100 | 5.3 | II 5½-inch. ------------------+-----------+------+-------+-----+--------------- AMIRAL DUPERRÉ. DUGUESCLIN. Armored belt and four barbette turrets. Ram bow and overhanging dome stern. The armor-belt covers the water-line to the height of the main-deck beams, coming below the point of the ram and covering the steering-gear. The barbette turrets are arranged one on each side, abreast the forward smoke-stack, having an overhang of nearly half its diameter, so as to give clear fore-and-aft fire. The other two turrets are amidships, before and abaft the mizzen-mast. There are two armored pilot-houses on the Duperré, one abreast the forward turrets and one between the after ones; the Duguesclin has but one, forward. The gun-deck battery is composed of light rifled guns, unprotected. The deck plating of these ships is three inches in thickness (one inch steel over two inches of iron). A bow-gun works in a single port under the topgallant forecastle. [Illustration: AMIRAL DUPERRÉ.] DEVASTATION. FOUDROYANT. REDOUBTABLE. Armored belt and redoubt. Ram bow and dome stern. The belt of the Redoubtable encircles the water-line to the height of the main-deck beams, curving down forward over the point of the ram; that of the other two ships stops short of the curve of the counter in an armored bulkhead, the lower edge being carried on by an armored deck to protect the steering-gear. The sides forward and abaft the redoubt are given a rank tumble home, the redoubt rising straight to the spar-deck, thus giving clear fore-and-aft and beam fire from the main-deck battery. A heavy gun is mounted in barbette on top of the redoubt, each side, having a clear firing angle of 180°; the gun-slide alone is protected by armor, while a musket-proof shield is mounted on the forward part of the slide, as protection to the crew. On the spar-deck is carried a battery of light rifles in broadside. [Illustration: DEVASTATION.] TRIDENT. FRIEDLAND. [Illustration: TRIDENT.] Armored belt and casemate. Ram bow and dome stern. The belt encircles the water-line to the height of the main-deck beams. The casemate rises to the height of the spar-deck beams. At the forward end of the casemate, on each side, a barbette unarmored half-turret is built, being simply a projecting shelf for mounting a heavy gun. The sides from the main-deck up forward are given a sharp tumble home to permit clear forward fire; while aft the spar-deck rail is placed inboard about three feet, leaving a clear fire aft, giving the part of the spar-deck outside the rail the appearance of a continuous channel-piece. The turret guns are only protected by a light musket-proof shelter, rising above the slide. There is a light battery of broadside rifles on the spar-deck, a bow-gun working in one port under the forecastle, and a similar stern-gun. There is no forward or after fire from the main-deck battery. COLBERT. Of the same type as the Friedland, except that in place of the barbette half-turrets there are armored breastworks for the protection of a heavy bow and a heavy stern-gun on the spar-deck. [Illustration: COLBERT.] RICHELIEU. MARENGO. OCEAN. SUFFREN. [Illustration: SUFFREN.] Armored belt and casemate, with four armored barbette turrets. Ram bow, straight stern. The belt encircles the water-line, coming to but not covering the ram, which is a solid bronze casting. The barbette turrets are just over the corners of the casemate, projecting nearly half their diameter clear of the side for fore-and-aft fire. The side is not broken in or given a tumble home, as the muzzles of the turret guns are above the spar-deck rail. The Richelieu has twin screws, the others single ones. There is no fore-and-aft fire from the casemate. Light spar-deck broadside battery. Armored commander’s lookout. BAYARD. TURENNE. LA GALLISSONNIERE. TRIOMPHANTE. VICTORIEUSE. VAUBAN. Second-rate sea-going iron-clads. Armored belt and casemate and two barbette turrets. The belt encircles the water-line to the height of the main-deck beams, the casemate carrying the armor to the spar-deck. The barbette turrets are over the forward corners of the casemate. Ram bow and dome stern. Light spar-deck broadside battery. Bow-gun working in a single port under the forecastle. [Illustration: VICTORIEUSE.] GLOIRE. COURONNE. FLANDRE. PROVENCE. HEROINE GAULOISE. GUYENNE. MAGNANIME. SAVOIE. REVANCHE. SURVEILLANTE. VALEUREUSE. [Illustration: LA GLOIRE.] Broadside iron-clad frigates, completely armored. These vessels belong to the earliest type, and, with the exception of the Couronne and Heroine, they have wooden hulls. The armor extends from about three feet below the water-line to the spar-deck beams. Armored conning towers are placed abaft the main-mast. Originally built for a large battery of light smooth-bores, the height of the main-deck presents the full outfit of a heavy battery. BELLIQUEUSE. ALMA. JEANNE D’ARC. THETIS. ARMIDE. ATALANTE. MONTCALM. REINE BLANCHE. Second-class cruising iron-clads. Armor belt and casemate, and four barbette turrets. The belt comes to the main-deck beams all around, the casemate carrying it up to the spar-deck. The turrets are at the corners of the casemates. In some of these vessels the after turrets were left off, it being found that the hull was overweighted when it was attempted to put heavier guns aboard than the ships were originally intended to carry. [Illustration: JEANNE D’ARC.] TONNERRE. FULMINANT. FURIEUX. TEMPETE. TONNANT. VENGEUR. [Illustration: TONNERRE.] Single-turreted, casemated monitors for coast defence. These vessels are heavily armored at the water-line; the single turret is very large, in order to bring the two guns in it well apart, to gain clear fire aft on each side of the superstructure. This turret is on the forward third of the hull, and it, as well as the superstructure aft, is surrounded by a breastwork that does not come out to the side. On top of the turret is a barbette commander’s lookout. Forward the deck rises into a short forecastle, just abaft of which is an armored casemate giving ingress into the crew’s quarters. The superstructure abaft the turret is musket-proof, of a width just sufficient to permit the guns to get stern-fire. The upper part expands into a flying deck, with a low musket-proof shield, and corner stands for Hotchkiss machine-guns. TIGRE. BELIER. CERBERE. BOULEDOGUE. Monitor rams. These vessels have a low freeboard, the single turret being on the forward third of the hull, surrounded by a casemate, which also covers the lower part of the smoke-stack. A superstructure rises forward and aft of the turret and is semi-cylindrical, curving at the ends in such a manner as to give no foothold on any part. The turret is surmounted by a barbette lookout. The hulls are of wood and heavily strengthened at the ram. Double screws. TAUREAU. Similar to the above, with the exception that the turret is fixed and has four ports for bow and beam fire. [Illustration: TAUREAU.] ONONDAGA. Double-turreted American monitor; laminated plating, low freeboard, no casemate. ROCHAMBEAU. Casemated iron-clad (late Dunderberg). Ram bow, low freeboard, and rectangular casemate, with sloping sides giving fore-and-aft and beam fire. [Illustration: ROCHAMBEAU.] EMBUSCADE. PROTECTRICE. IMPRENABLE. REFUGE. IMPLACABLE. OPINIATRE. Armored floating batteries. Low freeboard forward and abaft, with rectangular casemates having perpendicular sides, and giving fore-and-aft and beam fire. Light draft. [Illustration: EMBUSCADE.] CAIMAN. INDOMPTABLE. TERRIBLE. Coast-defence vessels; type not known, but presumably citadel ships of a displacement not less than 12,000 tons. The battery of this type is six 13¼-inch guns. They are evidently intended as more powerful vessels than either the Inflexible or Duilio. FRENCH UNARMORED FLEET. (RAPID CRUISERS.) A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Construction Material. ====================+========+========+========+=======+========= TYPE AND NAME. | A | B | C | D | E --------------------+--------+--------+--------+-------+--------- | Ft. in.| Ft. in.| Ft. in.| Tons. | 1st Class Cruisers. | | | | | Duquesne | 326 6 | 50 | 22 7 | 5,345 | Iron | | | | |sheathed +--------+--------+--------+-------+--------- Tourville | 326 6 | 50 | 22 7 | 5,345 | ” | | | | | --------------------+--------+--------+--------+-------+--------- 2d Class Cruisers. | | | | | Duguay Trouin | 289 8 | 42 9 | 16 1 | 3,070 | ” +--------+--------+--------+-------+--------- Villars | 249 3 | 37 11 | 15 1 | 2,231 | Wood Forfait | 249 3 | 37 11 | 15 1 | 2,231 | ” Magon | 249 3 | 37 11 | 15 1 | 2,231 | ” Roland | 249 3 | 37 11 | 15 1 | 2,231 | ” La Perouse | 262 5 | 37 5 | 17 | 2,200 | ” D’Estaing | 262 5 | 37 5 | 17 | 2,200 | ” +--------+--------+--------+-------+--------- Monge | 262 5 | 37 5 | 17 | 2,200 | ” Nielly | 262 5 | 37 5 | 17 | 2,200 | ” * * * * | 262 5 | 37 5 | 17 | 2,200 | ” * * * * | 262 5 | 37 5 | 17 | 2,200 | ” +--------+--------+--------+-------+--------- Infernet | 245 8 | 35 9 | 12 5 | 1,865 | ” Champlain | 245 8 | 35 9 | 12 5 | 1,865 | ” Laclocheterie | 245 8 | 35 9 | 12 5 | 1,865 | ” Du Petit Thouars | 245 8 | 35 9 | 12 5 | 1,865 | ” Sané | | | | 1,900 | ” Seignelay | | | | 1,900 | ” Fabert | | | | 1,900 | ” --------------------+--------+--------+--------+-------+--------- 3d Class Cruisers. | | | | | Eclaireur | 236 2 | 35 5 | 14 8 | 1,610 |Composite Rigaut de | 236 2 | 35 5 | 14 8 | 1,610 | ” Genouilly | | | | | --------------------+--------+--------+--------+-------+--------- 3d Class Dispatch Vessels. | | | | Bisson | 200 | 28 5 | 11 | 833 | ” Labourdonnais | 200 | 28 5 | 11 | 833 | ” Hussard | 200 | 28 5 | 11 | 833 | ” Lancier | 200 | 28 5 | 11 | 833 | ” Chasseur | 200 | 28 5 | 11 | 833 | ” Voltigeur | 200 | 28 5 | 11 | 833 | ” +--------+--------+--------+-------+--------- Bouvet | | | | | ” Parseval | | | | 850 | ” --------------------+--------+--------+--------+-------+--------- F = Indicated Horse-power. G = Maximum Speed. H = Date of Launch. ====================+=======+=====+========+=============== TYPE AND NAME. | F | G | H |BATTERY. --------------------+-------+-----+--------+--------------- | |Knots| Year. | 1st Class Cruisers. | | | | Duquesne | 6,589 | 17 | 1876 | VII 7½-inch, | | | | XIV 5½-inch. +-------+-----+--------+--------------- Tourville | 6,589 | 17 | 1877 | VII 7½-inch, | | | | XIV 5½-inch. --------------------+-------+-----+--------+--------------- 2d Class Cruisers. | | | | Duguay Trouin | 3,740 | 16 | 1877 | V 7½-inch, | | | | V 5½-inch. +-------+-----+--------+--------------- Villars | 2,790 | 15 |Building| Forfait | 2,790 | 15 | ” | Magon | 2,790 | 15 | ” | Roland | 2,790 | 15 | ” | La Perouse | 2,790 | 15 | ” | VI 6½-inch, D’Estaing | 2,790 | 15 | ” | IX 5½-inch. Monge | 2,790 | 15 | ” | Nielly | 2,790 | 15 | ” | * * * * | 2,790 | 15 | ” | * * * * | 2,790 | 15 | ” | +-------+-----+--------+--------------- Infernet | 1,784 | 14.4| 1869 | Champlain | 1,784 | 14.4| 1872 | Laclocheterie | 1,784 | 14.4| 1872 | Du Petit Thouars | 1,784 | 14.4| 1875 | I 6½-inch, Sané | 1,967 | 15 | 1867 | VIII 5½-inch. Seignelay | 1,900 | 14.7| 1875 | Fabert | 1,900 | 14.7| 1875 | --------------------+-------+-----+--------+--------------- 3d Class Cruisers. | | | | Eclaireur | 1,900 | 15 | 1876 | Rigaut de | 1,900 | 15 | 1877 | VIII 5½-inch. Genouilly | | | | --------------------+-------+-----+--------+-------------- 3d Class Dispatch Vessels. | | | Bisson | 850 | 12.2| 1877 | Labourdonnais | 850 | 12.2| 1876 | Hussard | 850 | 12.2| 1876 | IV 5½-inch. Lancier | 850 | 12.2| 1877 | Chasseur | 850 | 12.2|Building| Voltigeur | 850 | 12.2| ” | +-------+-----+--------+--------------- Bouvet | | | 1876 | I 6½-inch, Parseval | 850 | 12 | 1877 | II 5½-inch, | | | | I 4¾-inch. --------------------+-------+-----+--------+--------------- FRENCH UNARMORED FLEET—(CONTINUED.) ====================+===============+==========+============= | | | | | Date | TYPE AND NAME. | Displacement. | of | BATTERY. | | Launch. | | | | --------------------+---------------+----------+------------- | Tons. | Year. | 1st Class Gun-boats.| | | Crocodile | | | Lionne | | | Lutin | 452 | | I 7½-inch, Lynx | | | II 4-inch. Milan | | | Vautour | | | +---------------+----------+------------- Diligente | 393 | | II 5½-inch. --------------------+---------------+----------+------------- 2d Class Gun-boats. | | | Chacal | | | Etendard | | | Fanfare | | | Gladiateur | 295 | | II 5½-inch. Hyene | | | Jaguar | | | Leopard | | | Oriflamme | | | +---------------+----------+------------- Couleuvre | | | Décidée | | | Frelon | 295 | | II 5½-inch. Pique | | | Surprise | | | Tactique | | | +---------------+----------+------------- Epée | 177 | | I 9¼-inch, 28 Gun-boats | 177 | | I 4¾-inch. --------------------+---------------+----------+------------- Transports. | | Bievre | 1,475 | | Oise | 1,770 | | Caravans | 2,868 | 1875 | Ampère | | Building | II 5½-inch. Annamite | 5,840 | 1876 | Mytho | 5,840 | Building | Shamrock | 5,840 | ” | Tonquin | 5,840 | ” | +---------------+----------+------------- Allier | 1,655 | ” | Nievre | 1,655 | ” | IV 5½-inch. Drac | 1,655 | ” | Saone | 1,655 | ” | --------------------+---------------+----------+------------------------------------------------ DUQUESNE. TOURVILLE. Iron frigates, sheathed with wood and coppered. Strengthened bows for ramming, with heavy bronze rams. Three half-turrets or platforms on each side of the spar-deck, projecting clear of the side to give clear fore-and-aft fire. Bow-gun working in a single port under the forecastle. Pilot-house and chart-room on a bridge forward of the smoke-stacks. Boats carried on a gallows-frame between the smoke-stacks. Fine lines, heavy shoulder; the bow-frames are given a flare out from the main-deck up, to give a full forecastle for working the bow-gun. Single screw, full sail-power. Gun-deck, broadside battery, fourteen 5½-inch rifles. Spar-deck battery, seven 7½-inch rifles. Bow-fire, three 7½-inch; beam-fire, nine 5½-inch (two guns can be shifted on the gun-deck, so as to give nine for a broadside), three 7½-inch; stern-fire, two 7½-inch. Two sets of engines and boilers, placed one abaft the other for protection. Between the forward turrets on the spar-deck are the wash-rooms and water-closets, giving the appearance of a fourth half-turret. Maximum speed at sea for 24 hours, 16½ knots. [Illustration: TOURVILLE.] DUGUAY TROUIN. Iron corvette, sheathed with wood and coppered. Strengthened bow for ramming, with heavy bronze ram. Four half-turrets, similar to those of the Tourville. Bow-gun working under the forecastle in a single port. Single screw, full sail-power. All the battery carried on the spar-deck, leaving a clear, roomy main-deck. Stern-gun mounted in barbette on a centre-pivot carriage. Bow-fire, two 7¼-inch, one 5½-inch; beam-fire, two 7¼-inch, three 5½-inch; stern fire, two 7¼-inch, one 5½-inch. [Illustration: DUGUAY TROUIN.] VILLARS CLASS (seventeen in number). Second-class wooden corvettes, with strengthened ram bow. Two light bow-guns firing through recessed ports, giving bow and beam fire. (In some cases the guns are on the forecastle, in others underneath.) Stern-gun mounted on a centre-pivot carriage in barbette. Midship guns of heavy calibre, the deck being carried out slightly, to give them an extreme firing angle. [Illustration: VILLARS.] ECLAIREUR CLASS (two in number). Third-class composite corvettes, with strengthened ram bow. Bow pivot-gun mounted on the forecastle: stern-pivot in barbette; six guns in broadside. [Illustration: ECLAIREUR.] LANCIER CLASS (eight in number). Avisos, or fourth-class corvettes, composite, with strengthened ram bows. Four rifled-guns mounted on centre-pivot carriages in the midship line of the vessel. Drop-rail abreast the main-deck guns. [Illustration: LANCIER.] LYNX CLASS (seven in number). First-class composite gun-boats, with strengthened ram bows. Light, centre-pivoting rifled bow and stern-guns, and one heavy rifled, centre-pivot gun amidships firing in barbette. [Illustration: LYNX.] FARCY CLASS (twenty-seven in number). Second-class iron gun-boats. These vessels are more nearly large launches, built with ram bows to give them good displacement. One heavy gun is mounted in the bow, the slope of the bow from the ram up being carried up to form a musket-proof shield, permitting the gun to fire through an embrasure.[2] [Illustration: TROMBLON] [2] By increasing the displacement of this type thirty tons, an increase of speed of two knots has been obtained, a 4-inch stern-gun mounted, and the boats made perfectly seaworthy. MYTHO CLASS (four in number). First-class iron troop-ships, similar in general to the English troopers of the Serapis class. Capacity for berthing 1700 men with all the camp equipage. [Illustration: MYTHO.] DRAC CLASS (four in number). Light cavalry transports. These vessels are composite built and may serve either as transports or gun-boats, as they carry a battery of two light and two heavy centre-pivoting rifles. They are used for the transportation of cavalry horses, artillery, and stores. [Illustration: DRAC.] BIEVRE CLASS (four in number). Light, fast iron transports, similar in general to the Drac class. FRENCH GENERAL-SERVICE FLEET. (OLD-TYPE STEAM CRUISERS.) A = Displacement. B = Indicated Horse-power. C = Guns. D = Construction Material. E = Date of Launch. =====================+=======+=======+======+======+====== TYPE AND NAME. | A | B | C | D | E ---------------------+-------+-------+------+------+------ | Tons. | | | | Year. Ships of the Line. | | | | | Souverain | 5,115 | | 25 | Wood | 1856 Louis XIV | 4,820 | | 12 | ” | 1854 Ville de Bourdeaux| 5,210 | | 12 | ” | 1860 Ville de Lyon | 5,210 | | 12 | ” | 1861 Castiglione | 5,500 | | 12 | ” | 1857 Masséna | 5,015 | | 12 | ” | 1860 Fontenoy | 3,934 | | 12 | ” | 1858 Jean Bart | 3,934 | | 22 | ” | Saint Louis | 3,934 | | 12 | ” | 1854 ---------------------+-------+-------+------+------+------ Frigates. | | | | | Pallas | 3,560 | 1,330 | 34 | ” | 1860 Magicienne | 3,375 | 1,310 | 32 | ” | 1861 Themis | 3,375 | 1,310 | 18 | ” | 1862 Victoire | 3,325 | 1,310 | 16 | ” | 1861 Flore | 3,100 | 1,520 | 18 | ” | 1867 Clorinde | 1,740 | 1,430 | 12 | ” | 1865 ---------------------+-------+-------+------+------+------ Corvettes. | | | | | Amorique | 2,800 | 1,040 | 22 | ” | 1862 Minerve | 2,700 | 1,530 | 22 | ” | 1865 Venus | 2,700 | 1,530 | 22 | ” | 1864 Chateau Renaud | 1,830 | 1,700 | 5 | ” | 1866 Dupleix | 1,780 | 1,050 | 10 | ” | 1861 Decrès | 1,770 | 1,480 | 6 | ” | 1866 Desaix | 1,640 | 1,780 | 6 | ” | 1866 Laplace | 1,590 | 700 | 10 | ” | 1852 Cosmos | 1,840 | 1,100 | 13 | ” | 1861 D’Assas | 1,920 | 740 | 16 | ” | 1864 ---------------------+-------+-------+------+------+------ Sloops. (Avisos, 1st Class.) | | | | Beautemps | 1,270 | 1,050 | 6 | ” | 1872 Beaupré | 1,270 | 1,050 | 6 | ” | 1872 Duchaffaut | 1,289 | 1,050 | 8 | ” | 1872 Hugon | 1,290 | 1,050 | 6 | ” | 1872 Kerguelen | 1,280 | 1,050 | 6 | ” | 1872 Bourayne | 1,260 | 960 | 6 | ” | 1869 Dayot | 1,260 | 960 | 6 | ” | 1869 Ducouëdic | 1,260 | 960 | 6 | ” | 1869 ---------------------+-------+-------+------+------+------ Sloops (Avisos, 2d Class.) | | | Kersaint | 1,270 | 960 | 6 | ” | 1869 Segond | 1,260 | 960 | 6 | ” | 1869 Vaudreuil | 1,280 | 1,050 | 6 | ” | 1870 D’Estrées | 1,280 | 1,000 | 6 | ” | 1867 Volta | 1,300 | 1,000 | 6 | ” | 1867 Hamelin | 1,220 | 1,000 | 6 | ” | 1866 Limier | 1,220 | 1,000 | 6 | ” | 1866 Talisman | 1,310 | 800 | 6 | ” | 1863 Kleber | 1,260 | 740 | 2 | ” | 1856 Forbin | 1,250 | 870 | 4 | ” | 1859 Linois | 830 | 720 | 6 | ” | 1867 Cassard | 850 | 660 | 3 | ” | 1859 Hirondelle | 1,080 | 1,780 | 2 | ” | 1870 ---------------------+-------+-------+------+------+------ Despatch Vessels (Avisos, 2d Class). | | | Renaud | 840 | 490 | 4 | ” | 1866 Lamotte Piquet | 720 | 420 | 4 | ” | 1859 Latouche Treville | 720 | 390 | 4 | ” | 1860 Curieux | 760 | 560 | 4 | ” | 1859 Surcouff | 700 | 430 | 4 | ” | 1858 Bougainville | 740 | 310 | 6 | ” | 1859 Bruat | 700 | 490 | 4 | ” | 1866 Adonis | 730 | 490 | 4 | ” | 1868 Guichen | 700 | 460 | 2 | ” | 1863 Boursaint | 750 | 610 | 3 | ” | 1872 Corse | 510 | 220 | | ” | 1842 ---------------------+-------+-------+------+------+------ Transports. | | | | | Algesiras | 5,600 | 2,100 | 4 | ” | 1842 Charlemagne | 5,600 | 1,150 | 12 | ” | 1851 Intrépide | 5,600 | 2,960 | 4 | ” | 1864 Ville de Paris | 5,600 | 1,350 | 12 | ” | 1850 Guerrière | 3,200 | 1,350 | 4 | ” | 1860 Entreprenante | 3,200 | 780 | 4 | ” | 1858 Dryade | 3,200 | 540 | 4 | ” | 1856 Ceres | 3,200 | 410 | 4 | ” | 1857 Danaë | 3,250 | 540 | 4 | ” | 1888 Renommée | 3,200 | 540 | 4 | ” | 1847 Européen | 2,350 | 1,200 | 2 | Iron | Japon | 2,300 | 960 | 2 | Wood | Aveyron | 3,500 | 1,520 | 4 | ” | 1864 Correze | 3,500 | 1,520 | 4 | ” | 1868 Creuze | 3,500 | 1,520 | 2 | ” | 1863 Sarthe | 3,500 | 1,520 | 2 | ” | 1862 Tarne | 3,500 | 1,520 | 2 | ” | 1863 Orme | 3,000 | 750 | 4 | ” | 1862 Var | 3,000 | 750 | 4 | ” | 1863 Calvados | 3,000 | 540 | 4 | ” | 1856 Finisterre | 3,000 | 650 | 4 | ” | 1859 Garonne | 3,000 | 650 | 4 | ” | 1859 Jura | 3,000 | 650 | 4 | ” | 1855 Dordogne | 2,400 | 370 | 4 | ” | 1855 Maine | 2,400 | 370 | 4 | ” | 1855 Meuse | 2,400 | 370 | 4 | ” | 1855 Rhin | 2,400 | 560 | 4 | ” | 1855 Yonne | 2,400 | 370 | 4 | ” | 1856 Seine | 2,400 | 370 | 4 | Iron | Charente | 2,000 | 280 | 4 | ” | 1856 Adour | 1,800 | 250 | 2 | ” | 1856 Ariege | 1,800 | 450 | 2 | ” | 1865 Isère | 1,800 | 450 | 2 | ” | 1865 Moselle | 1,970 | 390 | 2 | ” | Vienne | 1,800 | 370 | 2 | Wood | 1858 Cher | 1,400 | 610 | 6 | ” | 1868 Indre | 1,400 | 610 | 6 | ” | 1864 Dives | 1,682 | 670 | 2 | ” | 1870 Rance | 1,682 | 670 | 6 | ” | 1870 Sendre | 1,682 | 670 | 6 | ” | 1872 Vire | 1,682 | 670 | 6 | ” | 1868 Loiret | 1,200 | 210 | 3 | ” | 1856 ---------------------+-------+-------+------+------+------ Paddle-wheel frigates Albatros, Magellan. ” corvettes Catinat, Coligny, Eumenide. Four paddle-wheel gun-boats, 1st class, 700 to 800 tons, two to four guns. Four ” ” 2d ” 700 tons, four guns. Thirty screw tenders. GERMANY. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Construction Material. F = Greatest Thickness of Armor. ========================+=====+=====+=======+=======+======+===== TYPE AND NAME. | A | B | C | D | E | F ------------------------+-----+-----+-------+-------+------+----- | Ft.| Ft. | Ft.in.| Tons. | | In. Redoubt Frigates. | | | | | | Kaiser | 280 | 62 | 24 8 | 7,440 | Iron | 11¾ Deutschland | 280 | 62 | 24 8 | 7,560 | ” | 11¾ ------------------------+-----+-----+-------+-------+------+----- Turret Frigates. | | | | | | Friederich der Grosse| 298 | 52 | 24 8 | 6,560 | ” | 10½ Preussen | 308 | 54 | 24 8 | 6,748 | ” | 10½ ------------------------+-----+-----+-------+-------+------+----- Casemate Frigates. | | | | | | König Wilhelm | 353 | 60 | 26 6 | 9,451 | ” | 9¼ | | | | | | +-----+-----+-------+-------+------+----- Friederich Karl | 290 | 55 | 24 | 5,819 | ” | 4¾ Kron Prinz | 286 | | 24 6 | 5,393 | ” | 4¾ ------------------------+-----+-----+-------+-------+------+----- Barbette Corvettes. | | | | | | Sachsen | 213 | 51 | 19 8 | 7,135 | ” | 9 Baiërn | 213 | 51 | 19 8 | 7,135 | ” | 9 Würtemberg | 213 | 51 | 19 8 | 7,135 | ” | 9 Two others | 213 | 51 | 19 8 | 7,135 | ” | 9 ------------------------+-----+-----+-------+-------+------+----- Redoubt Corvette. | | | | | | Hansa | 285 | 51 | 21 7 | 3,497 | Wood | 6¼ ------------------------+-----+-----+-------+-------+------+----- Monitor. | | | | | | Arminius | 197 | 36 | 13 7 | 1,558 | ” | 4½ ------------------------+-----+-----+-------+-------+------+----- Redoubt Ram. | | | | | | Prinz Adalbert | 158 | 27 | 21 7 | 3,863 | ” | 4½ ------------------------+-----+-----+-------+-------+------+----- Armored Gun-boats. | | | | | | Wespe | | | 10 2 | 985 | Iron | 8 Viper | | | 10 2 | 985 | ” | 8 Biene | | | 10 2 | 985 | ” | 8 Mücke | | | 10 2 | 985 | ” | 8 Scorpion | | | 10 2 | 985 | ” | 8 Basilisk | | | 10 2 | 985 | ” | 8 Four others | | | 10 2 | 985 | ” | 8 ------------------------+-----+-----+-------+-------+------+----- River Monitors. | | | | | | Rhein | 164 | 25 | 3 6 | | | 1½ Mosel | 164 | 25 | 3 6 | | | 1½ ------------------------+-----+-----+-------+-------+------+----- G = Least Thickness of Armor. H = Backing. I = Indicated Horse-power. J = Maximum Speed. ========================+=====+=====+=======+=====+=============== TYPE AND NAME. | G | H | I | J |BATTERY. ------------------------+-----+-----+-------+-----+--------------- | In. | In. | |Knots| Redoubt Frigates. | | | | | Kaiser | | | | | VIII 10¼-inch, Deutschland | 6¼ | 10¼ | 8,000 | 14½ | I 8¼-inch. ------------------------+-----+-----+-------+-----+--------------- Turret Frigates. | | | | | Friederich der Grosse| | | | | IV 10¼-inch, Preussen | 5½ | 8¼ | 5,400 | 14 | II 6¾-inch. ------------------------+-----+-----+-------+-----+--------------- Casemate Frigates. | | | | | König Wilhelm | 5½ | 9¾ | 8,000 | 14¾ | XVIII 9¼-inch, | | | | | V 8¼-inch. +-----+-----+-------+-----+--------------- Friederich Karl | 3 | 15 | 3,500 | 13½ | XVI 8¼-inch. Kron Prinz | 3 | 16 | 4,800 | 14¼ | ------------------------+-----+-----+-------+-----+--------------- Barbette Corvettes. | | | | | Sachsen | 9 | 7¾ | 5,600 | 14 | Baiërn | 9 | 7¾ | 5,600 | 14 | I 12-inch, Würtemberg | 9 | 7¾ | 5,600 | 14 | IV 10¼-inch Two others | 9 | 7¾ | 5,600 | 14 | ------------------------+-----+-----+-------+-----+--------------- Redoubt Corvette. | | | | | Hansa | 4 | 12½ | 3,000 | 12 | VIII 8¼-inch. ------------------------+-----+-----+-------+-----+--------------- Monitor. | | | | | Arminius | 3 | 9 | 1,200 | 10½ | IV 8¼-inch. ------------------------+-----+-----+-------+-----+--------------- Redoubt Ram. | | | | | Prinz Adalbert | 3 | 12 | 1,000 | 9 | I 8¼-inch. | | | | | II 6¾-inch. ------------------------+-----+-----+-------+-----+--------------- Armored Gun-boats. | | | | | Wespe | 4 | 8 | 700 | 9 | Viper | 4 | 8 | 700 | 9 | Biene | 4 | 8 | 700 | 9 | Mücke | 4 | 8 | 700 | 9 | I 12-inch. Scorpion | 4 | 8 | 700 | 9 | Basilisk | 4 | 8 | 700 | 9 | Four others | 4 | 8 | 700 | 9 | ------------------------+-----+-----+-------+-----+--------------- River Monitors. | | | | | Rhein | 1¼ | 8 | 80 | 6 | II 4½-inch. Mosel | 1¼ | 8 | 80 | 6 | ------------------------+-----+-----+-------+-----+--------------- KAISER. DEUTSCHLAND. Armored belt, redoubt, and stern casemate. Ram bow and straight stern. The belt encircles the water-line, coming up to the height of the main-deck beams abaft the redoubt, but forward of it reduced in height to not over three feet above the water-line, and having a heavy steel deck at the height of its upper edge. The belt does not cover the ram. The sides forward and abaft the redoubt are given a rank tumble home, while the redoubt is carried straight up to the spar-deck beams, opening fore-and-aft and beam fire from the angular ports, (vide Devastation, French). The stern casemate prevents raking from aft, and also protects a stern-gun working in a single port. The engines and boilers form two distinct sets, one abaft the other, the magazines and shell-lockers coming between them. The redoubt has an overhang clear of the side of 3½ feet forward and 1½ feet aft. There is no bow-gun, the bow-fire coming from the redoubt. The after-redoubt guns only fire to within 15° of right astern, the stern-gun filling out the dead-angle. Single screw, full sail-power. [Illustration: KAISER.] FRIEDRICH DER GROSSE. PREUSSEN. Armored belt, breastwork, and two revolving turrets. These ships are built on the lines of the Monarch, although improved in detail. The belt encircles the water-line, but does not come as low down as the point of the ram. The breastwork surrounds the boilers and the bottoms of the turrets, but the engines are outside of and abaft it. The turrets are closer together than in the Monarch, and have no upper works to interfere with their fire. The dead-angles of the turret-guns are filled by a bow and stern-gun working in single unprotected ports. These ships have single screws and about three-quarter sail-power. [Illustration: PREUSSEN.] KÖNIG WILHELM. [Illustration: KÖNIG WILHELM.] Armored belt and long, main-deck casemate, stern casemate, and two spar-deck redoubts. Ram bow and straight stern. The belt encircles the water-line, coming to the height of the main-deck beams aft, but somewhat lower forward of the casemate, that portion being covered by a steel deck. There is no forward or after fire from the casemate, the sides rising straight up fore and aft. The ends of the casemate are protected from raking by armored bulkheads, rising to the spar-deck beams forward and abaft. The stern casemate protects a single gun working in one port. At the forward end of the main casemate, and rising clear of the upper deck, is a redoubt—or rather traverse, for it is unprotected at the rear—giving protection to two guns working each in two ports for fore-and-aft and beam fire. At the after-end of the main casemate is a similar traverse, which has an overhang of several feet, its two guns working also each in two ports for stern and beam fire (vide Sultan, English). These traverses encumber the spar-deck for working the gear of the sails. Single screw and full sail-power. FRIEDRICH KARL. KRON PRINZ. Armored belt and long casemate with bow redoubt. Ram bow and straight stern. The belt encircles the water-line to the height of the main-deck beams, coming down in a curve forward well over the ram. There is no fore-and-aft fire from the casemate, the ship being wall-sided. The bow redoubt cuts off the point of the bow above the spar-deck beams and protects a bow-gun working in a single port. There is a high, oval, armored pilot-house just abaft the main-mast. No stern-fire. Single screw and full sail-power. [Illustration: FRIEDRICH KARL.] SACHSEN. BAIERN. WÜRTEMBERG. (Two others not yet named.) Partial armored belt and two barbette casemates. Ram bow, round stern. Half sail-power (brig rigged). Four smoke-stacks. The belt forms a casemate for the boilers and engines, covering the middle third of the ship, the lower edge being prolonged in a heavy steel deck, which, aft, protects the steering-gear. This casemate rises to the spar-deck beams. At its after-end a high, rectangular barbette casemate rises well up above the spar-deck rail, giving clear fore-and-aft and beam fir to its four guns. At the forward end of the casemate is an oval barbette turret (vide Temeraire, English) amidships, giving clear bow and beam fire to its single gun. These ships gain a nearly perfect all-around fire from the heaviest calibre guns, with a maximum thickness of armor. They combine great armor and battery strength with light draft and displacement. [Illustration: SACHSEN.] HANSA. [Illustration: HANSA.] Armored belt and double-decked redoubt. Swan-breasted bow strengthened for ramming, pointed stern, single screw, full sail-power. The belt encircles the water-line to the height of the main-deck. The main-deck redoubt is short and does not give fore-and-aft fire, the ship being wall-sided. The upper-deck redoubt, rising a little above the spar-deck rail, is octagonal, to permit angular ports for fore-and-aft and beam fire. The spar-deck rail is carried inboard parallel to the keel to open the angular ports. ARMINIUS. [Illustration: ARMINIUS.] Double-turreted monitor, with ram bow and no overhang. Light flying deck, single screw. (American type modified.) PRINZ ADALBERT. Armored belt, double redoubt. Long ram bow, round stern, single screw, half sail-power. The belt encircles the water-line to the height of the upper deck. The curve of the ram bow is carried up, forming a spar-deck redoubt, giving protection to a single heavy bow-gun working in one port. A second redoubt, well aft, gives protection to two guns, each working in two ports for fore-and-aft and beam fire. A superstructure aft cuts off the stern-fire from these guns, and the forward redoubt cuts off the bow-fire. The shape of both of the redoubts is nearly circular. The Stonewall (Confederate) belonged to this type. (Sister ships.) [Illustration: PRINZ ADALBERT.] WESPE. VIPER. BIENE. MÜCKE. SCORPION. BASILISK. RHEIN. MOSEL. (Four others not yet named.) Small, light-draft, armored gun-boats. All except the Rhein and Mosel have an armored belt and a horseshoe-shaped traverse, giving protection to the crew of a single barbette gun, which gives only bow-fire. They are provided with rams. The Rhein and Mosel are light-draft monitors, similar to the Austrian Danube gun-boats. (See Austrian Danube monitors.) The Wespe class belongs to the English Staunch and the French Farcy type. GERMAN UNARMORED FLEET. (FAST CRUISERS.) ====================+===============+=========+============== TYPE AND NAME. | Displacement. | Maximum | BATTERY. | | Speed. | --------------------+---------------+---------+----------------- | Tons. | Knots. | Iron Gun-deck Corvettes. Leipsic | 3,863 | 16 | XII 6¾-inches. Bismarck | 3,863 | 16 | +---------------+---------+--------------- Blücher | 2,460 | 15 | Stosch | 2,460 | 15 | Moltke | 2,460 | 15 | XVI 5¾-inches. Sedan | 2,460 | 15 | One other | 2,460 | 15 | --------------------+---------------+---------+--------------- Wooden Gun-deck Corvettes. Freya | 1,954 | 14½ | Louise | 1,665 | 14 | II 6¾-inch, Ariadne | 1,665 | 13 | VI 5¾-inch. GERMAN GENERAL-SERVICE FLEET. (OLD-TYPE STEAM CRUISERS.) ==================+===============+=========+======== | | | TYPE AND NAME. | Displacement. | Maximum | Guns. | | Speed. | ------------------+---------------+---------+-------- | Tons. | Knots. | Wooden Gun-deck Corvettes. | | | Elizabeth | 2,428 | 12 | 18 Hertha | 2,227 | 10¾ | 19 Vineta | 2,227 | 11 | 19 ------------------+---------------+---------+-------- 2d Class Corvettes. Augusta | 1,760 | 13¾ | 10 Arcona | 1,760 | 13½ | 10 Gazelle | 1,760 | 13½ | 10 Nymphe | 1,760 | 13¾ | 10 Medusa | 1,760 | 13¾ | 10 Victoria | 1,760 | 14 | 10 Ariadne | 1,650 | 12½ | 6 ------------------+---------------+---------+-------- Gun-boats. Albatross | 695 | 10½ | 4 Nautilus | 695 | 10½ | 4 Wolf | 482 | 10½ | 4 Hyäne | 482 | 10½ | 4 Cyclop | 395 | 8½ | 4 Blitz | 395 | 8½ | 4 Two others | 395 | 8½ | 4 Komet | 340 | 8½ | 3 Meteor | 340 | 8½ | 8 Delphin | 340 | 8½ | 3 Drache | 340 | 8½ | 3 Otter | 130 | 8½ | 3 Fuchs | 260 | 8 | 1 Habicht | 260 | 8 | 1 Hai | 260 | | 1 Tiger | 260 | | 1 Natter | 260 | | 1 Salamander | 260 | | 1 Scorpion | 260 | | 1 Sperber | 260 | | 1 ------------------+---------------+---------+-------- Transport and Dispatch Vessels. Hohenzollern | 1,690 | | 2 Three others | 1,690 | | 2 Pommerania | 380 | | 2 Lorelei | 380 | | 2 Grille | 337 | | 2 Falke | 1,004 | | 2 ------------------+---------------+---------+-------- Harbor-tugs. Torpedo-launches. Hulks. Guard-ships. GREECE. ARMORED VESSELS. ===============+===============+============+=========+=========== TYPE AND NAME. | Displacement. | Armor. | Maximum | BATTERY. | | | Speed. | ---------------+---------------+------------+---------+---------- | Tons. | Inches. | Knots. | Broadside | | | | Frigates. | | | | II 9-inch. Olga | 2,060 | 4½ to 5 | 10 | X 7-inch | | | | Armstrong. ---------------+---------------+------------+---------+----------- Casemate | | | | Gun-boat. | | | | Georgius | 1,800 | 7 | 13 | II 9-inch. ---------------+---------------+------------+---------+----------- UNARMORED VESSELS. 1 Screw Corvette, Hellas. 5 Yachts (old blockade runners). 1 Screw Gun-boat. 7 Pinnaces and small Gun-boats. OLGA. Completely armored broadside frigate or large corvette; ram bow, straight stern. Armor-belt enclosing water-line to the height of spar-deck beams. (See Maria Pia, Italian.) GEORGIUS. Armored belt and hexagonal casemate amidships. The rail forward of the casemate is carried inboard parallel to the keel to open the bow-fire from the casemate. Abaft, the rail is cut in for some distance from the casemate, and given a rank tumble home, to open the after-fire. No stern-fire. Double screws, three-quarter sail-power. The armor has a backing of ten inches. The guns work on turn-tables, one on each side, and have a firing-angle of about 110° from each port. [Illustration: GEORGIUS.] HOLLAND. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Greatest Thickness of Armor. F = Least Thickness of Armor. ======================+=======+======+=======+=======+=====+===== TYPE AND NAME. | A | B | C | D | E | F ----------------------+------+------+-------+-------+-----+----- | Ft. |Ft.in.|Ft. in.| Tons. | In. | In. Ram Turret-ships. | | | | | | König der | 280 | 51 | 19 8 | 5,197 | 8 | 6 Nederlanden | | | | | | Prins Hendrik | 230 | 44 | 18 10 | 2,360 | 4.5 | 4 ---------------------+-------+------+-------+-------+-----+----- Rams. | | | | | | Stier | 193 6 | 36 6 | 15 6 | 2,060 | 6 | 4 Schorpioen | 193 6 | 36 | 15 6 | 2,140 | 6 | 4 Buffel | 205 | 40 | 15 6 | 2,162 | 6 | 4 Guinea | 205 | 40 | 15 6 | 2,338 | 6 | 4 ---------------------+-------+------+-------+-------+-----+----- 1st Class Ram Monitor.| | | | | | Draak | 195 | 46 | 10 10 | 2,121 | 8 | 6 ---------------------+-------+------+-------+-------+-----+----- 2d Class Ram Monitors.| | | | | | Matador | 195 | 46 | 9 10 | 1,623 | 4.5 | 4.5 Luipaard | 187 | 44 | 8 8 | 1,500 | 4.5 | 4.5 Hyaena | 187 | 44 | 8 6 | 1,540 | 3 | 4.5 Panter | 187 | 44 | 8 6 | 1,540 | 3 | 4.5 Haai | 187 | 44 | 8 6 | 1,540 | 3 | 4.5 Wesp | 187 | 44 | 8 6 | 1,540 | 3 | 4.5 Adder | 187 | 44 | 8 6 | 1,540 | 3 | 4.5 ----------------------+-------+------+-------+-------+-----+----- Monitors. | | | | | | Krokodil | 187 | 44 | 8 6 | 1,505 | 2.9 | 5.5 Heiligerlee | 187 | 44 | 8 6 | 1,505 | 2.9 | 5.5 Cerberus | 187 | 44 | 8 6 | 1,505 | 2.9 | 5.5 Bloedhound | 187 | 44 | 8 6 | 1,505 | 2.9 | 5.5 Tiyger | 187 | 44 | 8 6 | 1,391 | 2.9 | 5.5 ----------------------+-------+------+-------+-------+-----+----- Gun-boat. | | | | | | Nummer 1 | 164 | 38 | 6 11 | 394 | 2.9 | 4.5 ----------------------+-------+------+-------+-------+-----+----- Light-draft Gun-boats.| | | | | | Vahalis | 150 11| 8 4 | 4 11 | 256 | 4.5 | 4 Isala | 150 11| 8 4 | 4 3 | 360 | 5 | 4.3 Rhenus | 150 11| 8 4 | 4 3 | 360 | 5 | 4.3 Mosa | 150 11| 8 4 | 4 3 | 360 | 5 | 4.3 Merva | 150 11| 8 4 | 4 3 | 360 | 5 | 4.3 ----------------------+-------+------+-------+-------+-----+----- G = Backing. H = Indicated Horse-power. I = Maximum Speed. J = Date of Launch. ======================+======+=======+=====+====+================= TYPE AND NAME. | G | H | I | J | BATTERY. ---------------------+------+-------+-----+----+----------------- | In. | |Knots|Year| Ram Turret-ships. | | | | | König der | 11.8 | 4,630 | 11.9|1874|IV 11-inch Armstrong Nederlanden | | | | |IV 4¾-inch Krupp. +------+-------+-----+----+----------------- Prins Hendrik | 9.8 | 2,400 | 12.1|1866|IV 9-inch Armstrong | | | | |IV 4¾-inch Krupp. ---------------------+------+-------+-----+----+----------------- Rams. | | | | | Stier | 11.8 | 2,200 | 12.3|1867|IV 9-inch Armstrong Schorpioen | 11.8 | 2,269 | 12.8|1867|IV ” ” +------+-------+-----+----+----------------- Buffel | 9.8 | 2,200 | 12.7|1867|IV 9-inch Armstrong | | | | |IV 30-pdr. smooth. +------+-------+-----+----+----------------- Guinea | 9.8 | 2,200 | 12.7|1867|IV 9-inch Armstrong | | | | |IV 30-pdr. smooth. ---------------------+------+-------+-----+----+----------------- 1st Class Ram Monitor.| | | | | Draak | 11.8 | 800 | 10 |1877|II 11-inch Krupp. ---------------------+------+-------+-----+----+----------------- 2d Class Ram Monitors.| | | | | Matador | 9.8 | 680 | 8 |1877| II 11-inch Krupp. Luipaard | 9.8 | 680 | 9 |1876| I ” ” +------+-------+-----+----+------------------- Hyaena | 9.8 | 680 | 9 |1870| Panter | 9.8 | 680 | 9 |1871| II 9-inch Haai | 9.8 | 680 | 9 |1868| Armstrong. Wesp | 9.8 | 680 | 9 |1869| Adder | 9.8 | 680 | 9 |1868| ----------------------+------+-------+-----+----+------------------- Monitors. | | | | | Krokodil | 11.8 | 630 | 9 |1868| Heiligerlee | 11.8 | 630 | 9 |1868| II 9-inch Cerberus | 11.8 | 630 | 9 |1869| Armstrong. Bloedhound | 11.8 | 630 | 9 |1869| Tiyger | 11.8 | 630 | 9 |1868| ----------------------+------+-------+-----+----+------------------- Gun-boat. | | | | | Nummer 1 | 10.6 | 360 | 9 |1863| II 60-pdr. smooth. ----------------------+------+-------+-----+----+------------------- Light-draft Gun-boats.| | | | | Vahalis | 7 | 200 | 8 |1870| II 60-pdr. smooth. +------+-------+-----+----+------------------- Isala | 5.1 | 320 | 8 |1876| Rhenus | 5.1 | 320 | 8 |1877| II 4¾-inch Krupp. Mosa | 5.1 | 320 | 8 |1878| Merva | 5.1 | 320 | 8 |1878| ----------------------+------+-------+-----+----+------------------- KONING DER NEDERLANDEN. PRINZ HENDRIK. Double-turreted, high-sided, sea-going monitors. Armored belt and casemate; ram bow, straight stern. The belt encloses the water-line to the height of the main-deck beams. The casemate encloses the bottoms of the turrets, engines, and boilers, occupying the middle third of the vessel. The fore-and-aft fire of the turret guns is completely cut off by the superstructures forming forecastle and cabin, and which rise to the height of the top of the turrets. [Illustration: PRINZ HENDRIK.] These superstructures are cut in at the ends nearest the turrets to open the fire as much as possible, increasing slightly the firing-angle and almost completely destroying the necessary freeboard. Between the turrets is a third superstructure, musket-proof, protecting the approaches to the boilers and engines. At the forward end of this superstructure is a musket-proof pilot-house. Double screws, full sail-power, with tripod fore and main masts. These ships are a medium between the Wyvern and the ill-fated Captain. Bow and stern fire are secured by light unprotected guns. STIER. SCHORPIOEN. BUFFEL. GUINEA. DRAAK. MATADOR. LUIPARD. HYAENA. PANTER. HAAI. WESP. ADDER. [Illustration: BUFFEL.] High-sided ram monitors. Armored belt, casemate, and single turret. Ram bow and round stern. The belt encircles the water-line to the height of the main-deck beams. The casemate surrounds the foot of the turret only. The turret has perfect all-around fire, being large enough to give stern-fire past the smoke-stack. A superstructure gives a full freeboard all around as high as the top of the casemate, furnishing quarters. The upper deck carries a light barbette battery of bow, stern, and broadside guns. Twin screw and half sail-power. KROKODIL. HEILIGERLEE. CERBERUS. BLOEDHOUND. TIYGER. Single-turreted low monitors, with high superstructures forward and abaft the turret cutting off the fore-and-aft fire. Twin screws, half-sail power. [Illustration: BLOEDHOUND.] VAHALIS. ISALA. RHENUS. MOSA. MERVA. Light-draft, single-turreted monitors. The turret is elevated and surrounded by a casemate having a tumble home of 35°. DUTCH UNARMORED FLEET. (FAST CRUISERS.) A = Displacement. B = Indicated Horse-power. C = Maximum Speed. D = Date of Launch. ===================+=======+=======+======+====+==================== TYPE AND NAME. | A | B | C | D | BATTERY. -------------------+-------+-------+------+----+-------------------- | Tons. | |Knots.|Year| 1st-class Cruisers.| | | | | Atjeh | 3,108 | 2,900 | 14 |1876| Tromp | 3,108 | 2,900 | 14 |1877| VI 6.8-inch Krupp. De Ruyter | 3,108 | 2,900 | 14 |1878| -------------------+-------+-------+------+----+-------------------- 3d-class Cruisers. | | | | | Suriname | 836 | 350 | |1876| I 5.8-inch Krupp. | | | | | III 4.7-inch ” +-------+-------+------+----+-------------------- Bonaire | 836 | 350 | |1876| I 5.8-inch ” | | | | | III 4.7-inch ” +-------+-------+------+----+-------------------- St. Eustatius | 836 | 350 | |1877| Samarang | 836 | 350 | |1877| I 5.8-inch ” Batavia | 836 | 350 | |1878| III 4.7-inch ” Macassar | 836 | 350 | |1878| Padang | 836 | 350 | |1878| -------------------+-------+-------+------+----+-------------------- DUTCH GENERAL-SERVICE FLEET. (OLD-TYPE STEAM CRUISERS.) A = Displacement. B = Indicated Horse-power. C = Construction Material. D = Date of Launch. ===================+=======+=======+===========+=========+====== TYPE AND NAME. | A | B | C | D | Guns. -------------------+-------+-------+-----------+---------+------ | Tons. | | | Year. | Frigate. | | | | | Evertsen | 3,300 | 1,000 | Wood | 1857 | 51 -------------------+-------+-------+-----------+---------+------ Corvettes. | | | | | Silverin Kruis | 2,160 | 1,480 | ” | 1869 | 12 Van Galen | 2,160 | 700 | ” | 1872 | 12 Leenwarden | 2,030 | 700 | ” | 1861 | 14 Curaçao | 2,030 | 700 | ” | 1863 | 14 Watergeus | 1,490 | 770 | ” | 1864 | 6 Marnix | 1,490 | 770 | ” | 1867 | 6 -------------------+-------+-------+-----------+---------+------ Sloops. | | | | | Alkmaar | 1,010 | 600 | Composite | 1874 | 3 Prinses Maria | 760 | 250 | Wood | 1862 | 7 Cornelius Dirks | 760 | 250 | ” | 1859 | 6 Aruba | 730 | 250 | Composite | 1873 | 3 -------------------+-------+-------+-----------+---------+------ Paddle Steamer. | | | | | Valk | 1,220 | 800 | Wood | 1864 | 6 -------------------+-------+-------+-----------+---------+------ DUTCH EAST INDIA GENERAL-SERVICE FLEET. (OLD-TYPE STEAM CRUISERS.) A = Displacement. B = Indicated Horse-power. C = Construction Material. D = Date of Launch. ========================+=======+=====+=============+======+====== TYPE AND NAME. | A | B | C | D | Guns. | | | | | ------------------------+-------+-----+-------------+------+------ | Tons. | | | Year.| Paddle Steamers. | | | | | Soeribaija | 1,450 | 975 | Wood | 1867 | 2 Merapi | 1,150 | 975 |Iron sheathed| 1874 | 6 Bromo | 1,150 | 975 | ” | 1874 | 6 Sumatra | 950 | 550 | Iron | 1867 | 4 Borneo | 950 | 550 | ” | 1867 | 4 Banka | 950 | 550 | ” | 1867 | 4 Timor | 950 | 550 | ” | 1867 | 4 Oenarang | 650 | 360 | ” | 1875 | 3 Soembing | 650 | 360 | ” | 1877 | 4 Sindoro | 650 | 360 | ” | 1877 | 4 Onrust | 190 | 290 | ” | 1863 | 3 Salak | 200 | 290 | ” | 1875 | 3 Admiral v. Kinsbergen| 180 | 200 | ” | 1854 | 1 ------------------------+-------+-----+-------------+------+------ Screw Steamers. | | | | | Aart Van Ness | 650 | 280 | Wood | 1863 | 2 Schouwen | 650 | 280 | ” | 1863 | 6 Bommelerward | 650 | 280 | ” | 1862 | 6 Riouw | 730 | 340 | Composite | 1872 | 3 Banda | 730 | 340 | ” | 1872 | 3 Amböina | 730 | 340 | ” | 1873 | 3 Deli | 730 | 340 | ” | 1873 | 3 Sambas | 750 | 350 | ” | 1874 | 3 Pontianak | 750 | 350 | ” | 1873 | 3 Bandjermassing | 750 | 350 | ” | 1874 | 3 Palembang | 750 | 350 | ” | 1874 | 3 ------------------------+-------+-----+-------------+------+------ Surveying Steamer. | | | | | Hydrograaf | 730 | 340 | ” | 1873 | 3 ------------------------+-------+-----+-------------+------+------ ITALY. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Indicated Horse-power. F = Maximum Speed. ==================+=====+=====+=====+========+=======+======= TYPE AND NAME. | A | B | C | D | E | F ------------------+-----+-----+-----+--------+-------+------- | Ft. | Ft. | Ft. | Tons. | | Knots. Citadel Ships. | | | | | | Dandolo | 340 | 65 | 26 | 10,650 | 7,500 | 14 Duilio | 340 | 65 | 26 | 10,650 | 7,500 | 14 Italia | 400 | 74 | 30 | 13,480 | 9,000 | 15 Lepanto | 400 | 74 | 30 | 13,480 | 9,000 | 15 ------------------+-----+-----+-----+--------+-------+------- Casemate and Redoubt Frigates. Palestro | 265 | 58 | 25 | 5,780 | 3,200 | 12.2 Principe Amadeo| 265 | 58 | 25 | 5,780 | 3,200 | 12.9 +-----+-----+-----+--------+-------+------- Venezia | 250 | 57½ | 25 | 5,699 | 4,000 | 13 Roma | 250 | 57½ | 25 | 5,099 | 3,500 | 13 ------------------+-----+-----+-----+--------+-------+------- Broadside Frigates. Ancona | 256 | 50 | 22 | 4,194 | 3,000 | 11½ Castelfidardo | 256 | 50 | 22 | 4,149 | 3,000 | 11½ Maria Pia | 256 | 50 | 22 | 4,194 | 3,000 | 11½ San Martino | 256 | 50 | 22 | 4,194 | 3,000 | 11½ +-----+-----+-----+--------+-------+------- Conte Verde | 256 | 50 | 22 | 4,194 | 3,000 | 11½ Messina | 256 | 50 | 22 | 4,194 | 3,000 | 11½ ------------------+-----+-----+-----+--------+-------+------- Floating Batteries. Terribile | 198 | 45 | 18 | 2,700 | 1,800 | 12 Formidabile | 198 | 45 | 18 | 2,700 | 1,800 | 12 +-----+-----+-----+--------+-------+------- Varese | 198 | 42 | 13 | 2,600 | 1,000 | 9 ------------------+-----+-----+-----+--------+-------+------- Monitor Ram. Affondatore | 290 | 40 | 20 | 4,070 | 3,200 | 13 ------------------+-----+-----+-----+--------+-------+------- G = Greatest Thickness of Armor. H = Least Thickness of Armor. I = Backing. J = Date of Launch. ==================+=====+=====+=====+========+============= TYPE AND NAME. | G | H | I | J | BATTERY. ------------------+-----+-----+-----+--------+------------- | In. | In. | In. | Year. | Citadel Ships. | | | | | Dandolo | 21½ | 13¾ | 19¾ | 1876 | Duilio | 21½ | 13¾ | 19¾ | 1878 | IV 17-inch, Italia | | | |Building| IV 4¾-inch. Lepanto | | | | ” | ------------------+-----+-----+-----+--------+------------- Casemate and Redoubt Frigates.| | | Palestro | 8⅝ | 6 | 24¼ | 1872 | I 11-inch, Principe Amadeo| 8⅝ | 6 | 24¼ | 1873 | IV 10-inch. +-----+-----+-----+--------+------------- Venezia | 6 | 4 | 26 | 1871 |VIII 10-inch, Roma | 6 | 4 | 26 | 1869 | I 9-inch. | | | | | XI 10-inch. ------------------+-----+-----+-----+--------+------------- Broadside Frigates. | | | | Ancona | 4⅝ | 3 | 13 | 1863 | Castelfidardo | 4⅝ | 3 | 13 | 1863 | IX 8-inch, Maria Pia | 4⅝ | 3 | 13 | 1864 | II 9-inch. San Martino | 4⅝ | 3 | 13 | 1864 | +-----+-----+-----+--------+------------- Conte Verde | 4⅝ | 3 | 13 | 1861 | VI 9-inch, Messina | 4⅝ | 3 | 13 | 1861 | I 8-inch. ------------------+-----+-----+-----+--------+------------- Floating Batteries. | | | | Terribile | 4½ | 3 | 9 | 1862 |VIII 8-inch. Formidabile | 4½ | 3 | 9 | 1862 | +-----+-----+-----+--------+------------- Varese | 4½ | 3 | 9 | 1862 | IV 8-inch, | | | | | I 6½-inch. ------------------+-----+-----+-----+--------+------------- Monitor Ram. | | | | | Affondatore | 5 | 3 | 9 | 1865 | II 9-inch. ------------------+-----+-----+-----+--------+------------- DANDOLO. DUILIO. ITALIA. LEPANTO. Armored-casemate, double-turreted monitor ships. Ram bow, overhanging stern. The casemate surrounds the boilers, engines, and turrets, occupying about one third of the ship. The lower edge of the casemate is carried forward and aft in a steel deck three inches thick, the deck curving down forward below the point of the ram. The upper deck is also plated fore and aft with two-inch steel plates. The turrets are placed diagonally to open full fore-and-aft and beam fire. The two sets of boilers and engines are grouped one abaft the other, the boilers being arranged transversely between the sets of engines. Twin screws, no sail-power, no superstructure. Designed by Admiral Brin. [Illustration: DUILIO.] PALESTRO. PRINCIPE AMADEO. Armored belt and double casemate. Swan breast, ram bow, straight stern. The belt encloses the water-line to the height of the main-deck beams. Forward is a double casemate or traverse (the rear being unprotected) rising to the top of the topgallant forecastle, and giving protection to two heavy guns on the main-deck, working each in two ports for bow and beam fire, and one heavy rifle on the upper deck working in two ports over the forward main-deck ones for bow-fire. The bow-frames are distorted to open the fire on the main-deck. Aft is a long main-deck traverse protecting four heavy rifles, giving two guns for stern-fire and, if desired, three for beam-fire (one gun may be shifted from side to side). The stern-frames, like those of the bow, are distorted to get stern-fire. Single screw, full sail-power. [Illustration: PALESTRO.] VENEZIA. ROMA. [Illustration: VENEZIA.] Armored belt, long main-deck casemate, and upper-deck bow and stern traverses. Straight bow, round stern. The belt encircles the water-line to the height of the main-deck beams. The casemate is long and trapezoidal in shape, with the corners cut to allow angular ports for fore-and-aft fire. The side forward and abaft the casemate is given a rank tumble home to open the fore-and-aft fire. The casemate surrounds the boilers and engines. On the spar-deck are bow and stern traverses, each protecting a gun working in a single port. The bow and stern upper rail is cut off by the traverses sufficient to give them square fronts. Single screw, full sail-power. ANCONA. CASTELFIDARDO. MARIA PIA. SAN MARTINO. CONTE VERDE. MESSINA. [Illustration: MARIA PIA.] Armored-belt and long-casemate, broadside frigates. Ram bows and round sterns. The armored belt encloses the water-line to the main-deck beams, and is carried up in the casemate to the spar-deck beams. No fore-and-aft fire except from light upper-deck guns. An armored pilot-house just forward of the mizzen-mast. Single screw, full sail-power. TERRIBILE. FORMIDABILE. VARESE. Old-type floating batteries. The Varese has the corners of her casemate cut to give fore-and-aft and beam fire. Walls of casemate tumble home at a sharp angle. Ram bows, twin screws, no sail-power. AFFONDATORE. [Illustration: AFFONDATORE.] Double-turreted monitor ram. High-sided, with half sail-power and superstructures forward and abaft the turrets. Armored belt enclosing the water-line to the upper-deck beams. Long ram bow, continued up and forming a topgallant forecastle nearly as high as the top of the turret. Musket-proof superstructure surrounding the engine-room. Stern-frames carried up to form a spar-deck cabin. No fore-and-aft fire. Single screw. This vessel was the Italian flag-ship at the Battle of Lissa. ITALIAN UNARMORED FLEET. (RAPID CRUISERS.) ======================+===============+=========+============ TYPE AND NAME. | Displacement. | Maximum | BATTERY. | | Speed. | ----------------------+---------------+---------+------------ | Tons. | Knots. | 2d Class Corvettes. Cristoforo Colombo | 2,500 | 16.2 | V 4¾-inch. Staffetta | 1,485 | 12.5 | V 3-inch. Rapido | 1,426 | 11.8 | ----------------------+---------------+---------+------------- Gun-boats. Agostin | 650 | 17 | Barbarigo | 650 | 17 | II 4¾-inch. Marcantonio | 650 | 17 | Colonna | 650 | 17 | ----------------------+---------------+---------+------------ Torpedo Vessels. Pietro Micca | 512 | 14.5 | Seb. Verniero | 512 | | Torpedoes. And. Provano | 512 | | ----------------------+---------------+---------+------------ ITALIAN GENERAL-SERVICE FLEET. (OLD-TYPE STEAM CRUISERS.) ====================+===============+==============+====== TYPE AND NAME. | Displacement. | Construction | Guns. | | Material. | --------------------+---------------+--------------+------ | Tons. | | Frigates. Vittorio Emanuele| 3,420 | Wood | 22 Maria Adelaide | 3,460 | ” | 24 --------------------+---------------+--------------+------ Corvettes. Vettor Pisani | 1,580 | ” | 14 Carracciolo | 1,580 | ” | 6 Garibaldi | 1,440 | ” | 8 --------------------+---------------+--------------+------ Dispatch Vessel. Vedetta | 790 | Iron | 4 --------------------+---------------+--------------+------ 1st Class Gun-boats. Scilla | 1,050 | Wood | 4 Cariddi | 1,050 | ” | 4 Guardiano | 265 | Iron | 1 Sentinella | 265 | ” | 1 --------------------+---------------+--------------+------ 2nd Class Gun-boats. Veloce | 274 | Wood | 4 Ardita | 274 | ” | 4 Conflenza | 262 | ” | 4 --------------------+---------------+--------------+------ Paddle-wheel Corvettes. Governolo | 1,700 | ” | 8 Ettore Fieramosca| 1,400 | ” | 6 Guiscardo | 1,400 | ” | 6 Archimede | 1,300 | ” | 6 --------------------+---------------+--------------+------ Dispatch Vessels. Esploratore | 1,080 | ” | 4 Messaggiero | 1,080 | ” | 4 --------------------+---------------+--------------+------ Transports. Citta di Genova | 3,730 | ” | 4 Citta di Napoli | 3,730 | ” | 8 Europa | 2,300 | Iron | 2 Conte Cavour | 1,870 | ” | 2 Washington | 1,400 | ” | 2 Doria | 1,100 | ” | 2 --------------------+---------------+--------------+------ Depot Vessel. Vulcano | 276 | Wood | --------------------+---------------+--------------+------ Hulks. Guard-ships. School-ships. Harbor-tugs. JAPAN. ARMORED FLEET A = Length between Perpendiculars. B = Breadth of Beam. C = Draft. D = Displacement. E = Indicated Horse-power. F = Maximum Speed. ===============+=====+========+=====+=======+=======+======== TYPE AND NAME. | A | B | C | D | E | F ---------------+-----+--------+-----+-------+-------+-------- | Ft. | Ft.in. | Ft. | Tons. | | Knots. Armored Corvettes. Foo-Soo | 220 | 48 | 18 | 3,718 | 3,500 | 13 +-----+--------+-----+-------+-------+-------- Kong-Go | 231 | 40 9 | 18 | 3,650 | 2,450 | 13¾ Hi-Yei | 220 | 48 | 18½ | 3,718 | 2,490 | 14 ---------------+-----+--------+-----+-------+-------+-------- Ram. Ko-tets-een | 158 | 27 | 13 | 3,863 | 1,000 | 9 ---------------+-----+--------+-----+-------+-------+-------- Broadside Corvette. Rio-jio-kan | 213 | 34 6 | 17½ | | | ---------------+-----+--------+-----+-------+-------+-------- G = Greatest Thickness of Armor. H = Least Thickness of Armor. I = Backing. J = Date of Launch. ===============|=====+=====+=====+======+=================== TYPE AND NAME. | G | H | I | J | BATTERY. | | | | | ---------------+-----+-----+-----+------+------------------- | In. | In. | In. | Year.| Armored Corvettes. Foo-Soo | 9 | 8 | | 1877 | IV 9½-inch, | | | | | II 6¾-inch Krupp. +-----+-----+-----+------+------------------- Kong-Go | 5 | 5 | | 1877 | III 6¾-inch, Hi-Yei | 5 | 5 | | 1878 | VI 5¾-inch Krupp. ---------------+-----+-----+-----+------+------------------- Ram. Ko-tets-een | 4½ | 3 | 12 | 1864 | III 9-inch | | | | | Armstrong. ---------------+-----+-----+-----+------+------------------- Broadside Corvette. Rio-jio-kan | 4 | 4 | | 1864 | II 6-inch, | | | | | X 5-inch | | | | |cast-iron rifles. ---------------+-----+-----+-----+------+------------------- JAPANESE UNARMORED FLEET. ======================+===============+============+======+====== TYPE AND NAME. |Length between | Breadth of |Draft.| Guns. |Perpendiculars.| Beam. | | ----------------------+---------------+------------+------+------ | Ft. | Ft. | Ft. | Corvettes. | | | | Tsu-ku-ba-kan | 197 | 29½ | 15 | 10 Nishin-kan | 203 | 29 | 14 | 7 Kasuga-kan | 242 | 27 | 10 | 7 ----------------------+---------------+------------+------+------ Gun-boats. | | | | Ho-shio-kan | 150 | 21 | 7 | 2 Moshium-kan | 150 | 21 | 7 | 4 Dai-itchi-Teibo-kan| 131 | 22 | 7 | 4 Dai-ni-Taibo-kan | 131 | 22 | 7 | 2 Un-yo-kan | | | | 4 Tchiotagata-kan | | | | 3 ----------------------+---------------+------------+------+------ Transports. | | | | Osaka-maru | | | | Two others | | | | ----------------------+---------------+------------+------+------ FOO-SOO. Armored belt and redoubt. Ram bow, round stern. Belt encircling the water-line to the height of the main-deck beams, and covering the ram. Square central redoubt, having an overhang of about three feet, the corners being cut off to permit angular ports for fore-and-aft and beam fire. The sides above the main-deck beams are given a rank tumble home to open the fore-and-aft fire of the redoubt. On top of the redoubt a heavy rifle is mounted on each side in barbette, giving a firing-angle of 180°. Designed by Reed. This ship resembles very closely in type the French Redoubtable. KONG-GO. HI-YEI. Armored-belt, broadside corvettes. The belt comes to the height of the upper-deck beams, but ends short of the bow and stern in an armored bulkhead. There is no fore-and-aft fire from the main battery. Two heavy bow-guns are carried under the forecastle in recessed ports, giving bow and beam fire. One stern-gun working in two recessed ports gives stern and beam fire. Single screw, full sail-power. Long yacht bow and round stern. KO-TETS-EEN (LATE STONEWALL). Armored belt and redoubt, long ram bow, round stern, single screw, and half sail-power. This vessel is almost the exact counterpart of the Prinz Adalbert (German). Both ships were built at Bordeaux. RIO-JIO-KAN. Partial armored belt, from about three feet below the water-line to the height of the spar-deck beams, ending forward and abaft the battery in armored bulkheads. There is no fore-and-aft fire from the battery, and only bow-fire from a light rifle. The disposition of the armor is similar to that of the Warrior. The hull is divided into several large water-tight compartments, and the long yacht-bow is strengthened for ramming. Single screw, full sail-power. NORWAY AND SWEDEN. ARMORED FLEET. A = Draft. B = Displacement. C = Indicated Horse-Power. D = Maximum Speed. E = Armor at Water-line. F = Armor on Turret. G = Backing. NORWAY. ================+======+=====+===+=====+====+====+===+============= TYPE AND NAME. | A | B | C | D | E | F | G |BATTERY. | | | | | | | | ----------------+------+-----+---+-----+----+----+---+------------- |Ft.in.|Tons.| |Knots| In.|In. |In.| Monitors. | | | | | | | | Scorpionen |11 6 |1,423|380| 7 | 5 |11.8|26 | Mjölner |11 6 |1,490|460| 7 | 5 |11.8|26 | Thrudvang |11 6 |1,490|500| 8 | 5 |11.8|26 | II 11-inch Thor |13 2 |1,970|600| 9 | 7 |13.7| 9 | Armstrong. Odin |13 2 |1,970|600| 9 | 7 |13.7| 9 | ----------------+------+-----+---+-----+----+----+---+------------- SWEDEN. ----------------+------+-----+---+------+---+----+---+------------- Monitors. | | | | | | | | John Ericsson|11 6 |1,475|380| 7 | 5 |10½ |31½| II 15-inch | | | | | | | | Rodman | | | | | | | | smooth-bore. +------+-----+---+------+---+----+---+------------- Thordön |11 6 |1,475|380| 7½ | 5 |10½ |26 | II 9¼-inch Tyrfing |11 6 |1,475|380| 7½ | 5 |10½ |26 | Finsporg Loke |12 2 |1,575|430| 8 | 5 |17¾ |24½| Rifle. ----------------+------+-----+---+------+---+----+---+------------- Monitor Gun-boats. | | | | | | | Garmer | 6 6 | 256| 90| 5½ | 1½| 6 | 7¾| Fenris | 8 3 | 256| 43| 6 | 1½|10½ |33¾| Sköld | 7 6 | 236| 17| 3¾ | 1½| 8½ |33¾| Gerda | 8 9 | 453|133| 8 | 2½|14 |33¾| Hildur | 8 9 | 453|133| 8 | 2½|14 |33¾| Björn | 8 9 | 453|155| 8 | 2½|14 |33¾| I 9¼-inch Berserk | 8 9 | 453|155| 8 | 2½|14 |33¾| Armstrong. Folke | 8 9 | 453|155| 8 | 2½|14 |33¾| Sölwe | 8 9 | 453|155| 8 | 2½|14 |33¾| Ulf | 8 9 | 453|155| 8 | 2½|14 |33¾| One other | 8 9 | 453|155| 8 | 2½|14 |33¾| ----------------+------+-----+---+------+---+----+---+------------- SCORPIONEN. MJOLNER. THRUDVANG. THOR. JOHN ERICSSON. THORDON. TJIFING. LOKE. Low freeboard, single-turreted monitors. (See Passaic, American.) ODIN. Armored belt and casemate. Ram bow, straight stern, low freeboard. The Odin belongs to the floating-battery type; her casemate rising above the deck-level with tumble-home sides, and ports in all four faces for all-around fire. [Illustration: GARMER.] THE TWELVE SWEDISH MONITOR GUN BOATS. Armored belt and fixed turret, twin screws, no sail power. The turret is dome-shaped, with a small dome-shaped armored pilot-house on its after-end. The sides of the turret curve into a steep glacis, which is carried out nearly to the side of the ship, the deck in wake of the turret being merely a narrow platform for passing fore and aft without difficulty. The single heavy gun is worked on a turn-table in five ports for all-around fire. The after-part of the turret is carried on in a superstructure covering the engines, boilers, and hatchways. A light flying deck or bridge is carried around the upper part of the turret. The armor of the side and turret is curved in every section, so as not to present a fair target for striking in any position. The ellipsoidal bow is very strong, and is heavily strengthened for ramming. NORWEGIAN AND SWEDISH UNARMORED FLEET. NORWAY. =================+===============+========+======================== TYPE AND NAME. | Displacement. | Speed. | BATTERY. -----------------+---------------+--------+------------------------ | Tons. | Knots. | Frigates. | | | Kong Sverre | 3,472 | 11 | XLIV 32-pdrs. Saint Olaf | 2,182 | 10 | XXXIV ” -----------------+---------------+--------+------------------------ Corvettes. | | | Nordsgernen | 1,609 | 9 | XVI ” Nornen | 958 | 9 | XIV ” -----------------+---------------+--------+------------------------ Gun-boats. | | | Steipner | 580 | 8 | I 10¼-inch, I 5¾-inch. +---------------+--------+------------------------ Vale | 233 | 8 | Uller | 233 | 8 | I 10¼-inch. +---------------+--------+------------------------ Glommen | | | Lugen | | | II 10¼-inch. Sarpen | | | Rjuken | | | +---------------+--------+------------------------ Two others | 233 | 8 | I 10¼-inch. Fourteen Galleys | | | I 5¾-inch. -----------------+---------------+--------+------------------------ SWEDEN. ========================+=============+=======+==================== TYPE AND NAME. |Displacement.| Speed.| BATTERY. ------------------------+-------------+-------+-------------------- | Tons. | Knots.| Ships of the line. | | | Stockholm | 2,850 | 10 | LXVI 20-pdrs. Vanadis | 2,130 | 12 | XVI 32-pdrs. ------------------------+-------------+-------+-------------------- Corvettes. | | | Balder | 1,880 | 9 | VI 5¼-inch Krupp. Gefle | 1,280 | 9 | VIII ” ” Thor | 1,070 | 9 | V ” ” Saga | 1,530 | 8 | VII ” ” ------------------------+-------------+-------+----------------------- Gun-boats. | | | Blenda | 500 | 13.2 | Disa | 500 | 13.2 | Urd | 500 | 13.2 | Verdande | 500 | 13.2 | I 10¾-inch, Skagul | 536 | 13.5 | I 4¾-inch. Skuld | 536 | 13.5 | Sköggald | 536 | 13.5 | Rota | 536 | 13.5 | +-------------+-------+-------------------- Svensksund | | | Hogland | | | Motala | | | Carlsund | | | Allög | 180 to 200 | 8 | I 4¾-inch. Astrid | | | Ingegud | | | Sigrid | | | Alfhild | | | Gunhild | | | ------------------------+-------------+-------+-------------------- Transport. | | | Valkyrian | | | I 5¾-inch. ------------------------+-------------+-------+-------------------- Torpedo Vessel. | | | Ran | 630 | 18 | I 6½-inch. ------------------------+-------------+-------+-------------------- The Navy is supplied with a number of Thorneycroft torpedo-launches using Whitehead torpedoes. PERU. ARMORED FLEET. ========================+=============+=======+=======+============= TYPE AND NAME. |Displacement.|Maximum|Date of| BATTERY. | |Speed. |Launch.| ------------------------+-------------+-------+-------+------------- | Tons. | Knots.| Year. | Floating Battery. | | | | Independencia | 1,968 | 12½ | 1865 | II 7-inch, | | | | XII 5¾-inch. ------------------------+-------------+-------+-------+------------- Turret ships. | | | | Atahualpa | 984 | 10½ | 1865 | II 9-inch, Manco Capac | 1,082 | 12 | 1865 | II 40-pdrs. ------------------------+-------------+-------+-------+------------- Monitors. | | | | Victoria | | | | Loa | | | | ------------------------+-------------+-------+-------+------------- PERUVIAN UNARMORED FLEET. =========================+=============+====== TYPE AND NAME. |Displacement.| Guns. -------------------------+-------------+------ | Tons. | Frigate. | | Callao | | 30 -------------------------+-------------+------ Corvettes. | | America | | 14 Union | | 14 -------------------------+-------------+------ Gun-boats. | | Chalaco | | 4 Tumbez | | 4 Chanchamaya | | 2 +-------------+------ Colon | | 2 -------------------------+-------------+------ INDEPENDENCIA (wrecked in action with the Covadonga). Armored casemate, ram bow, straight stern, single screw, half sail-power. The armor covers the water-line and rises to the height of the spar-deck beams, ending forward and abaft the battery in armored bulkheads. There is no fore-and-aft fire from the casemate, this fire being secured by a single bow and a single stern-gun mounted on the spar-deck, unprotected. ATAHUALPA. MANCO CAPAC. VICTORIA. LOA. Low-freeboard, single-turreted monitors of the American type. The Atahualpa and Manco Capac are the late American monitors Chickasaw and Winnebago. PORTUGAL. ARMORED CORVETTE. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Armor. F = Backing. G = Maximum Speed. =============+====+===+====+=====+=====+=====+======+=============== NAME. | A | B | C | D | E | F | G | BATTERY -------------+----+---+----+-----+-----+-----+------+--------------- | Ft.|Ft.| Ft.|Tons.| In. | In. |Knots.| | | | | | | | | | | | | | 10 | | | Vasco de Gama| 216|43 | 21 |2,479| to | 10 |13½ | II 10½-in., | | | | | | | | I 6-in. Krupp. | | | | | 9 | | | II 40-pdr. | | | | | | | | Armstrong. -------------+----+---+----+-----+-----+-----+------+--------------- Armored belt and casemate. (See Foo Soo, Japanese.) Ram bow, straight stern. The belt encircles the hull to the height of the upper deck, coming below the ram. The casemate rises above the deck, the corners being cut to permit angular ports for fore-and-aft and beam fire. The rail is carried back slightly and the casemate has an overhang of three feet, giving the vessel, at a distance, the appearance of a paddle steamer. Single screw, full sail-power. PORTUGUESE GENERAL-SERVICE FLEET. ========================+=============+=====+============+======== TYPE AND NAME. |Displacement.|Guns.| Nominal |Date of | | |Horse-power.|Launch. ------------------------+-------------+-----+------------+-------- | Tons. | | | Year. Corvettes. | | | | Estephania | 1,476 | 19 | 400 | 1859 Bartholomeu Diaz | 1,243 | 17 | 400 | 1858 Rainha de Portugal | 1,020 | 8 | 150 | 1876 Mindello | 1,020 | 8 | 150 | 1876 Duque de Terceira | 848 | 5 | 220 | 1864 Sagres | 814 | 4 | 300 | 1858 Infante Don Henrique | 848 | 10 | 200 | 1862 Sa de Bandeira | 848 | 13 | 200 | 1862 ------------------------+-------------+-----+------------+-------- Gun-boats. | | | | Rio Lima | 539 | 5 | 80 | 1875 Tamega | 589 | 5 | 80 | 1875 ------------------------+-------------+-----+------------+-------- Screw Gun-boats. | | | | Sado | 589 | 5 | 80 | 1875 Tejo | 589 | 2 | 100 | 1869 Douro | 369 | 2 | 100 | 1873 Quanza | 369 | 8 | 100 | 1877 ------------------------+-------------+-----+------------+-------- Paddle Gun-boats. | | | | Quelimane | 286 | 1 | 40 | 1868 Tete | 111 | 1 | 85 | 1871 Sena | 111 | 1 | 85 | 1871 ------------------------+-------------+-----+------------+-------- Transports. | | | | India | 1,201 | 2 | 160 | 1871 Africa | 1,400 | 2 | | 1875 ------------------------+-------------+-----+------------+-------- RUSSIA. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Indicated Horse-power. F = Maximum Speed. G = Greatest Thickness of Armor. ===================+======+======+======+=======+=====+=====+===== TYPE AND NAME. | A | B | C | D | E | F | G -------------------+------+------+------+-------+-----+-----+----- |Ft.in.|Ft.in.|Ft.in.| Tons. | |Knots| In. Frigates. Sevastopol |300 | 50 10| 25 11| 6,200 |3,088| 12 | 4½ +------+------+--=---+-------+-----+-----+----- Petropaulowski |300 | 56 | 25 3| 6,200 |2,460| 11 | 4½ +------+------+----=-+-------+-----+-----+----- Knjaz Pozarski |280 | 49 | 21 | 4,500 |2,835| 10.6| 4½ General Admiral |285 | 48 | 23 | 4,500 |6,300| 13 | 6 +------+------+-----=+-------+-----+-----+----- Herzog von |285 | 48 | 23 | 4,500 |6,300| 13 | 6 Edinburgh | | | | | | | +------+------+---=--+-------+-----+-----+----- Minin |289 | 49 | 23 8| 5,800 |6,300| 12 | 9.2 -------------------+------+------+---=--+-------+-----+-----+----- Battery Ships. Perwenec |220 | 53 | 17 | 3,300 | 800| 9 | 4½ Netronz-menya |220 | 53 | 17 | 3,300 |1,140| 8 | 4½ Kreml |218 6| 53 | 17 | 3,300 | 913| 8.5| 6 -------------------+------+------+------+-------+-----+-----+----- Turret Ships. Peter der Grosse |330 | 64 | 22 9 | 9,510 |8,700| 13.2| 17 Admiral Lazareff |260 | 43 6| 19 | 3,700 |2,020| 10.8| 5½ Admiral Greigh |260 | 43 6| 19 | 3,700 |2,020| 10.2| 5½ Admiral Cicagoff |260 | 43 6| 19 2 | 3,700 |2,080| 10.8| 6 Admiral Spiridoff|260 | 43 6| 19 2 | 3,700 |2,080| 10.8| 6 -------------------+------+------+------+-------+-----+-----+----- Popoffkas. Vice-Admiral |121 |121 | 14 | 3,550 | | 8.3| 16 Popoff | | | | | | | Novgorod |101 |101 | 13 2 | 2,490 | | 6.5| 9 -------------------+------+------+------+-------+-----+-----+----- Double-turret Monitors. Carodjezka |210 | 42 | 11 9 | 1,835 | 750| 8.7| 4½ Russalka |210 | 42 | 11 9 | 1,835 | 750| 8.7| 4½ Smertch |172 10| 38 | | 1,380 | 700| 8.3| 4½ -------------------+------+------+------+-------+-----+-----+----- Single-turret Monitors. Stryeletch | | | | | | | Jedinrog | | | | | | | Latnik | | | | | | | Bronenosec | | | | | | | Uragan | | | | | 340 | | Tifon |200 | 46 | 11 6 | 1,558 | to | 7 | 12 Larva | | | | | 490 | | Perun | | | | | | | Wjestchun | | | | | | | Koldun | | | | | | | +------+------+------+-------+-----+-----+----- Sistov | | | 5 | 512 | 290| 8 | 3 Nikopolis | | | 5 | 512 | 290| 8 | 3 -------------------+------+------+------+-------+-----+-----+----- H = Least Thickness of Armor. I = Backing. J = Date of Launch. ===================+=====+======+======+====================== TYPE AND NAME. | H | I | J | BATTERY. -------------------+-----+------+------+----------------------- | In. |In. | Year | Frigates. Sevastopol | 3 | 2.6 | 1863 |XVIII 8¼-inch Aboukoff. +-----+------+------+------------------------ Petropaulowski | 3 | 2.4 | 1865 | XXI ” | | | | I 5.8-inch Aboukoff. +-----+------+------+------------------------ Knjaz Pozarski | 3 | 1.8 | 1867 | X ” ” General Admiral | 4 | 1 | 1873 | IV ” | | | | II ” ” +-----+------+------+------------------------ Herzog von | 4 | 1 | 1875 | IV ” Edinburgh | | | | II ” ” +-----+------+------+------------------------ Minin | 6 | 24 | 1878 | IV ” | | | | VIII ” ” -------------------+-----+------+------+------------------------ Battery Ships. Perwenec | 4 | 10 | 1863 | XIV ” ” Netronz-menya | 4 | 12 | 1864 | XVI ” | | | | I 60-pdr. smooth. Kreml | 4 | 18 | 1864 | XII 5.8-inch. | | | | V 5.8-inch Aboukoff -------------------+-----+------+------+-------+---------------- Turret Ships. Peter der Grosse | 9 | 10 | 1872 | IV 12-inch Aboukoff. Admiral Lazareff | 3 | 18 | 1867 | VI 9-inch ” Admiral Greigh | 3 | 18 | 1868 |III 11-inch ” Admiral Cicagoff | 4 | 18 | 1868 | II ” ” Admiral Spiridoff| 4 | 18 | 1868 | II ” ” -------------------+-----+------+------+------------------------ Popoffkas. Vice-Admiral | 16 | 15¾ | 1875 | II 12-inch ” Popoff | | | | Novgorod | 8¼ | 9 | 1873 | II 11-inch ” -------------------+-----+------+------+------------------------ Double-turret Monitors. Carodjezka | 3¼ | 18 | 1867 | IV 9-inch ” Russalka | 3¼ | 18 | 1867 | IV ” ” Smertch | 4 | 7.8 | 1864 | II ” ” -------------------+-----+------+------+------------------------ Single-turret Monitors. Stryeletch | | | | Jedinrog | | | | Latnik | | | | Bronenosec | | | | Uragan | | | | Tifon | 12 | 39 | 1864 | II 9-inch Aboukoff. Larva | | | | Perun | | | | Wjestchun | | | | Koldun | | | | +-----+------+------+------------------------ Sistov | 2 | 10 | 1864 | II 4¾-inch, Nikopolis | 2 | 10 | 1864 | I 3¼-inch Aboukoff. -------------------+-----+------+------+------------------------ SEVASTOPOL. PETROPAULOWSKI. Armored belt and casemate, swan-breasted ram bow, round stern, single screw, full sail-power. The belt encircles the water-line to the height of the main-deck beams. The casemate rises to the spar-deck beams, with armored bulkheads forward and abaft. No fore-and-aft fire from the casemate, the ships being wall-sided. (See Achilles, English.) KNJAZ POZARSKI. Armored belt and casemate; ram bow, round stern, single screw, full sail-power. Corners of casemate cut to permit angular fire. (See Hercules, English.) Double iron hull, very flat-bottomed, and having two bilge-keels in place of a main-keel. Bow and stern fire from light spar-deck guns, unprotected. PERWENEC. NETRONZ-MENYA. KREML. [Illustration: PERWENEC.] Completely armored broadside frigates, ram bow, overhang stern, single screw, full sail-power. (See Numancia, Spanish.) The Kreml has her bow and stern spar-deck rails recessed for fore-and-aft fire. (See Amethyst, English.) The sides of these ships tumble home from the water-line at an angle of 15°. LAZAREFF. GREIGH. CICAGOFF. SPIRIDOFF. American type of low-freeboard, revolving-turreted monitors, with strengthened bows for ramming. The Lazareff and Greigh have three turrets, the others two. SISTOV. NIKOPOLIS. Floating batteries. Armored belt and casemate built on upper deck, with ports in all four faces for all-around fire. (See Embuscade, French.) GENERAL ADMIRAL. HERZOG VON EDINBURGH. Armored belt and armored barbette casemate. Straight bow, long, peculiarly-shaped dome stern, single screw, full sail-power. The belt encircles the water-line to the height of the main-deck beams, and the main-deck is protected by steel plates two inches in thickness. The barbette casemate is square, low-browed, and has considerable overhang, rising clear of the spar-deck to a height of about four feet, and protecting the carriages of six heavy pivot-rifles giving clear fore-and-aft and beam fire. The symmetry of the hull is preserved throughout. These ships carry a very great coal supply, sufficient to carry them a distance of 6000 miles at a speed of ten knots. [Illustration: GENERAL ADMIRAL.] MININ. [Illustration: MININ.] Originally laid down for a casemated monitor, but subsequently transformed into an armored-belt corvette. Straight bow and stern, the bow being heavily strengthened for ramming,single screw, full sail-power (double topsail-yards). The belt encloses the water-line to the height of the upper deck. The battery is all on the upper deck and entirely unprotected. The upper-deck rail is so fashioned as to give four guns for bow and four for stern fire. Forward it is recessed on each bow, and similarly astern for the forward and after guns to get bow and beam fire. (See Amethyst, English.) The platform for the next pair of guns (forward and aft) has an overhang of about three feet (see Tourville, French), in order to give them clear fore-and-aft and beam fire also. The remainder of the battery is broadside. Her spar-deck rail is very high (about eight feet); she has a topgallant forecastle and poop-cabin. Amidships there is a bridge for discharging Whitehead torpedoes. PETER THE GREAT. Armored, belt, breastwork, and double-turreted sea-going monitor, straight bow strengthened for ramming, double screws, no sail-power. Musket-proof superstructure between the turrets expanding into a flying deck. The belt has an overhang similar to the American monitors. General type similar to the Dreadnaught. [Illustration: PETER THE GREAT.] ADMIRAL POPOFF. NOVGOROD. [Illustration] Armored belt and barbette casemate, circular iron-clads. Six screws, no sail-power. The belt of these ships encloses the water-line to the height of the low freeboard. The deck has more than the ordinary spring, forming a sort of light glacis. In the centre of the vessel rises a circular barbette casemate, covering the carriages of two heavy guns mounted on a turn-table within it. Forward and aft the top of the casemate is continued in a musket-proof superstructure, having aft a musket-proof pilot-house. The forward section of the vessel is heavily strengthened for ramming. The two smoke-stacks are placed one either side of the casemate. [Illustration: _Stern View_] [Illustration] DOUBLE AND SINGLE TURRETED MONITORS. These vessels are of the general type of the American monitors, with slight freeboard, great overhang, and double screws. The turret is raised somewhat higher than in the American monitors, and the foot is protected by a glacis. The turret is also somewhat larger, giving clear fire past the smoke-stacks. Pilot-house on top of the turret. [Illustration: URAGAN.] RUSSIAN GENERAL-SERVICE FLEET. -----------------------+---------------+-------+-------- TYPE AND NAME. | Displacement.| Guns.| Date of | | | Launch. -----------------------+---------------+-------+-------- Rapid Cruisers. | Tons. | | Year. Razbojnik | 1,334 | 3 | 1878 Nojeznik | 1,334 | 3 | 1878 Kreuzer | 1,334 | 3 | 1875 Dzigit | 1,334 | 3 | 1876 -----------------------+---------------+-------+------- BALTIC FLEET. -----------------------+---------------+-------+-------- Frigates. | | | Retziwan | 3,823 | 22 | 1855 Svetlana | 3,202 | 18 | 1858 -----------------------+---------------+-------+-------- Corvettes. | | | Askjold | 2,402 | 14 | 1863 Wityaz | 2,248 | 9 | 1862 Bogatyr | 2,155 | 10 | 1860 Wargat | 2,144 | 18 | 1862 Bayan | 1,997 | 10 | 1857 Voyevoda | 903 | 6 | 1856 Boyarin | 903 | 6 | 1856 Griden | 903 | 11 | 1856 -----------------------+---------------+-------+-------- Clippers. | | | Almaz | 1,821 | 6 | 1861 Zentchug | 1,807 | 7 | 1861 Jachout | 1,725 | 7 | 1862 Hydamak | 1,204 | 8 | 1860 Izurmed | 1,807 | 7 | 1862 Vsadnik | 1,069 | 8 | 1860 -----------------------+---------------+-------+-------- Paddle-wheel Gun-boats.| | | Olaf | 1,796 | 6 | 1852 Smieliz | 1,784 | 6 | 1858 Rurik | 1,507 | 3 | 1870 Chrabry | 1,450 | 6 | 1858 Vladimir | 859 | 2 | 1845 Volga | 500 | | 1853 Dnieper | 500 | | 1853 -----------------------+---------------+-------+-------- Yachts. | | | Derzava | 3,113 | 6 | 1871 Sztandard | 895 | 4 | 1858 Szareona | 895 | 4 | 1874 Alexandra | 895 | | 1851 Stryelna | 159 | | 1857 Slavanka | 182 | | 1874 Golubka | 14 | | 1872 -----------------------+---------------+-------+-------- Transports. | | | Kraary Gorka | 1,166 | | 1861 Artlestchik | 550 | | 1858 -----------------------+---------------+-------+-------- Gun-boats. | | | Bakan | 284 | | 1857 Kompas | 284 | | 1859 Seistan | 284 | | 1859 Straz | 234 | 1 | 1874 Casovoy | 234 | 1 | 1874 Zorkaya | 80 | 1 | 1873 -----------------------+---------------+-------+-------- Rapid Cruisers. | | | Rossya | 4,000 | 7 | 1879 Moskva | 3,500 | 7 | 1879 Petersburg | 3,500 | 7 | 1879 -----------------------+---------------+-------+-------- BLACK SEA FLEET. -----------------------+---------------+-------+-------- Corvettes. | | | Wojin | 1,820 | 4 | 1858 Sokol | 979 | 11 | 1859 Luica | 795 | 9 | 1865 Pamiat Merk | 795 | 9 | 1865 -----------------------+---------------+-------+-------- Paddle Gun-boats. | | | Turok | 425 | 2 | 1846 Taman | 505 | 2 | 1849 Elborus | 493 | 4 | 1854 Jeriklik | 1,145 | 2 | 1866 Livadia | 1,984 | 4 | 1871 -----------------------+---------------+-------+-------- Screw Gun-boats. | | | Bombory | 760 | 4 | 1852 Kazbek | 760 | 4 | 1854 Gonek | 745 | | 1879 Ingul | 678 | 2 | 1872 Redut Kale | 468 | 4 | 1854 Pseznape | 445 | 4 | 1857 Don | 360 | 2 | 1856 Salgir | 360 | 2 | 1857 Pitzunda | 332 | 4 | 1857 Kelasvy | 326 | 4 | 1859 Souksu | 326 | 5 | 1859 Taubse | 285 | 3 | 1858 Nerpa | 380 | 3 | 1877 Novorosyski | 247 | 2 | 1856 Abin | 264 | 2 | 1857 Vorobay | 261 | 2 | 1869 Utka | 170 | 1 | Lebed | 170 | 1 | Golubzik | 465 | 2 | 1859 Batzuska | 220 | 1 | 1857 Rodimy | 216 | 2 | 1858 Sestrica | 215 | 2 | 1858 Krikuny | 215 | 2 | 1858 Bothumy | 215 | 2 | 1857 Brater | 212 | 2 | 1857 Matuschka | 212 | 2 | 1857 Akerman | 110 | 1 | 1857 Opyt | 230 | 1 | 1870 Meteor | 230 | 1 | 1868 Docka | 212 | 1 | 1858 -----------------------+---------------+-------+-------- Rapid Cruisers. | | | Constantine | 1,600 | 4 | 1858 Vladimir | 1,652 | 7 | 1859 Argonaut | 715 | 6 | 1859 Vesta | 1,800 | 12 | 1858 -----------------------+---------------+-------+-------- SIBERIAN FLEET. -----------------------+---------------+-------+-------- Screw Gun-boats. | | | Abrek | 1,069 | 7 | 1860 Jermak | 706 | 4 | 1870 Tunguz | 706 | 4 | 1870 Vostok | 210 | 6 | 1852 -----------------------+---------------+-------+-------- Transports. | | | Japonec | 1,482 | 2 | 1858 Mandzur | 816 | 2 | 1858 Amerika | 554 | 8 | 1856 -----------------------+---------------+-------+-------- CASPIAN FLEET--12 Gun-boats. ARAL FLEET--8 Gun-boats. SPAIN. ARMORED FLEET. A = Displacement. B = Maximum Draft. C = Indicated Horse-power. D = Maximum Speed. E = Greatest Thickness of Armor. F = Least Thickness of Armor. G = Backing. ---------------+-------+------+-------+------+------+-----+----- NAME. | A | B | C | D | E | F | G ---------------+-------+------+-------+------+------+-----+----- | Tons. | Ft. | |Knots.| In. | In. | In. Vittoria | 6,984 | 27 | 3,700 | 12½ | 5½ | 4 | 14 Numancia | 6,992 | 26½ | 3,700 | 12¼ | 5 | 4 | 11 Sagunto | 6,200 | 26 | 3,700 | 12½ | 6 | 4 | 22½ Arapiles | 5,600 | 25 | 2,500 | 12 | 5 | 3 | 26 Zaragosa | 5,320 | 25 | 2,500 | 11 | 4¾ | 3 | 26 Mendez Nuñez | 3,200 | 22 | 2,250 | 7 | 4½ | 3 | 20½ Puigcerda | 512 | 6½ | 260 | 8 | 4 | 3 | 9 ---------------+-------+------+-------+------+------+-----+----- Aragon | | | | | | | Castilla | | | | | 4 | 3 | 9 Navarra | | | | | | | ---------------+-------+------+-------+------+------+-----+----- Duque de Tetuan| 590 | 7 | 209 | 6 | 4 | 3 | 9 ---------------+-------+------+-------+------+------+-----+----- H = Construction Material. I = Date of Launch. ---------------+------+------+------------------------------------- NAME. | H | I | BATTERY. ---------------+------+------+------------------------------------- | | Year.| Vittoria | Iron | 1867 | IV 9-inch, III 8-inch, XII 6½-inch. Numancia | ” | 1864 | IV 10-inch, III ” XVI ” Sagunto | Wood | 1876 | II ” V ” X ” Arapiles | ” | 1868 | II ” II ” X ” Zaragosa | ” | 1867 | IV 9-inch, III 7-inch, XII 6½-inch. Mendez Nuñez | ” | 1861 | IV ” II 8-inch. Puigcerda | ” | 1874 | I 16½-inch, I 4¾-inch. ---------------+------+------+------------------------------------- Aragon | | | Castilla | ” | 1878 | Navarra | | | ---------------+------+------+------------------------------------- Duque de Tetuan| ” | 1874 | IV 4¾-inch, I 6½-inch. ---------------+------+------+------------------------------------- VITTORIA. NUMANCIA. ARAPILES. ZARAGOSA. MENDEZ NUÑEZ. Fully armored broadside frigates, ram bow, round stern, single screw, full sail-power. Two armored pilot-houses. The Zaragosa was laid down for a wooden frigate, her design being changed when she was nearly finished. [Illustration: NUMANCIA.] SAGUNTO. Armored belt and casemate. Ram bow, round stern, single screw, full sail-power. (See Maria Pia, Italian.) PUIGCERDA. Double-turreted, light-draft river monitor. American type. SPANISH UNARMORED FLEET. (GENERAL SERVICE.) --------------------------+---------------+------ TYPE AND NAME. | Displacement. | Guns. --------------------------+---------------+------ | Tons. | Screw Frigates. | | Villa de Madrid | | 48 Almansa | | 48 Navas de Tolosa | | 48 Gerona | | 48 Asturias | | 51 Carmen | | 41 Lealtad | | 33 Concepcion | | 32 Blanca | | 38 --------------------------+---------------+------ Screw Corvettes. | | Maria de Molina | | 18 Jorge Juan | | 3 Sanchez Barcaiztegui | | 3 Tornado | | 6 Consuelo | | 2 Vencedora | | 3 Narvaëz | | 3 Santa Lucia | | 3 Diana | | 5 Africa | | 3 --------------------------+---------------+------ Paddle-wheel Corvettes. | | Ciudad de Cadiz | | 16 Isabel la Catolica | | 16 Colon | | 6 Blasco de Garay | | 6 Pizarro | | 6 Hernan Cortez | | 6 Churruca | | 2 Leon | | 2 Vulcano | | 6 Lepanto | | 2 Fernando el Catolico | | 3 Marquis del Douro | | 3 Liniers | | 2 Vigilante | | 2 Alerta | | 2 Conte del Venadito | | 2 Don Juan de Austria | | 1 Guadalquiver | | 1 Bazan | | 2 Maria | | 1 --------------------------+---------------+------ Transports. | | San Quentin | 1,300 | San Francisco de Borja | 1,300 | Marquis de la Vitoria | 1,200 | Patino | 1,200 | Ferrol | 800 | San Antonio | 600 | --------------------------+---------------+------ Screw Gun-boats. | | Telegrama | | 1 Criollo | | 1 Ardid | | 1 Indis | | 1 Caribe | | 1 Alarma | | 1 Descubridor | | 1 Yumuri | | 1 Pelicano | | 1 Cocodrillo | | 1 Salamandra | | 1 Fradera | | 1 Martin Alvarez | | 1 Somorrostro | | 2 Ebro | | 2 Bidassoa | | 2 Teruel | | 2 Nervion | | 2 Toledo | | 2 Tajo | | 2 Arianza | | 2 Turia | | 2 Segura | | 2 Altrevido | | 2 Mindanao | | 2 Calamianes | | 1 Paragua | | 1 Mindoro | | 1 Prueba | | 1 Guadiana | | 3 Sirena | | 3 Ligera | | 3 Favorita | | 3 Santa Filomena | | 2 Constancia | | 2 Valiente | | 2 Animosa | | 2 Prosperidad | | 2 Buenaventura | | 2 Caridad | | 2 Concordia | | 2 Edetna | | 2 Ceres | | 2 Activo | | 1 Cuba | | 1 Española | | 1 Argos | | 1 Lince | | 1 Centinela | | 1 Guardian | | 1 Vigia | | 1 Astuto | | 1 Almendares | | 1 Eco | | 1 Destello | | 1 Contramaestro | | 1 Marinero | | 1 Ericsson | | 1 Cazador | | 1 Canto | | 1 Gacela | | 1 Panay | | 1 Samar | | 1 Filipino | | 1 Bulusar | | 1 Jolo | | 1 Maribeles | | 1 Arayak | | 1 Pampanza | | 1 Bojeador | | 1 Albay | | 1 Manileno | | 1 Caviteno | | 1 Callao | | 1 --------------------------+---------------+------ JORGE JUAN. Second-class corvette, single screw, full sail-power. Complete all-around fire obtained by means of overhang in half-ports. Forecastle gun sunk in a well so as to cover the slide, carriage, and crew. [Illustration: JORGE JUAN.] TURKEY. ARMORED FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Indicated Horse-power. F = Maximum Speed. G = Greatest Thickness of Armor. H = Least Thickness of Armor. ---------------------+---+---+------+-----+-----+------+----+---- TYPE AND NAME. | A | B | C | D | E | F | G | H ---------------------+---+---+------+-----+-----+------+----+---- |Ft.|Ft.| Ft. |Tons.| |Knots.| In.| In. Casemate Frigates. Mess Oudieh |833|59 | 25 |8,994|7,910| 13 |18½ | 7 Nuss Ratijeh |292|54 | 25½ |6,900|6,800| 13 |18¼ | 6 Assar i Tefvik |275|50 | 21 |3,143|3,100| 13½ | 8 | 5½ ---------------------+---+---+------+-----+-----+------+----+---- Broadside Frigates. Azizie |293|56 | 25 |6,500| | 12 | 4½ | 3 Orchanie |293|56 | 25 |6,500| | 12 | 4½ | 3 Mahmudie |293|56 | 25 |6,500| | 12 | 4½ | 3 ---------------------+---+---+------+-----+-----+------+----+---- Casemate Frigates. Osmanie |293|56 | 25 |6,500| | 12 | 4½ | 3 Feth i Bulend |235|42 | 18 |2,760| | 13½ | 9 | 4½ Mukademmi i Hair |235|42 | 18 |2,760| | 12½ | 9 | 4½ Idschlalie |210|40 | 17 |2,800| | 11 | 5¾ | 4 Assar i Shefket |210|40 | 17 |2,800| | 11½ | 5½ | 3 Nedschin i Shefket|210|40 | 17 |2,800| | 11½ | 5½ | 3 ---------------------+---+---+------+-----+-----+------+----+---- Redoubt Corvettes. Avni Illah |230|36 | 17 |2,320| | 12½ | 6 | 4½ Muin i Zaffir |230|36 | 17 |2,320| | 12½ | 6 | 4½ ---------------------+---+---+------+-----+-----+------+----+---- Monitors. Hufz i Rahman |204|43 | 9 |2,300| | 12 | 6 | 4½ Seifi | | | | 640| 404 | 7 | 2½ | 2½ Hezber | | | | 640| 404 | 7 | 2½ | 2½ ---------------------+---+---+------+-----+-----+------+----+---- Casemate Gun-boats. Feth i Islam |100|25 | 6 | 328| 290 | 8 | 2½ | 2 Beurtlen |100|25 | 6 | 328| 290 | 8 | 2½ | 2 Semendire |100|25 | 6 | 328| 290 | 8 | 2½ | 2 Iskodra |100|25 | 6 | 328| 290 | 8 | 2½ | 2 Podgoritza |100|25 | 6 | 328| 290 | 8 | 2½ | 2 ---------------------+---+---+------+-----+-----+------+----+---- I = Backing. J = Date of Launch. ---------------------+----+----+------------------------ TYPE AND NAME. | I | J | BATTERY. ---------------------+----+----+------------------------------------ | In.|Year| Casemate Frigates. | | | Mess Oudieh | 10 |1875| XII 10-inch, III 7-inch Armstrong. Nuss Ratijeh | 18 |1878| X 9-inch, II 7-inch ” Assar i Tefvik | 9 |1868| VI 9-inch, II 8-inch ” ---------------------+----+----+------------------------------------ Broadside Frigates. | | | Azizie | 10 |1864| Orchanie | 10 |1864| XIV 7-inch, X 36-pdr. ” Mahmudie | 10 |1864| ---------------------+----+----+------------------------------------ Casemate Frigates. | | | Osmanie | 10 |1864| XIV 7-inch, X 36-pdr. ” Feth i Bulend | 10 |1869| IV 9-inch, ” Mukademmi i Hair | 10 |1872| IV 9-inch, I 7-inch ” Idschlalie | 13 |1870| IV 9-inch, I 7-inch Armstrong. Assar i Shefket | 10 |1869| V 9-inch ” Nedschin i Shefket| 10 |1868| IV 9-inch ” ---------------------+----+----+------------------------------------ Redoubt Corvettes. | | | Avni Illah | 10 |1868| IV 9-inch ” +----+----------------------------------------- Muin i Zaffir | 10 |1868| II 9-inch, II 7-inch, | | | I 4¾-inch ” ---------------------+----+----------------------------------------- Monitors. | | | Hufz i Rahman | 10 |1868| Seifi | 5½|1875| II 4¾-inch Krupp. Hezber | 5½|1875| ---------------------+----+----+------------------------------------ Casemate Gun-boats. | | | Feth i Islam | 10 |1864| Beurtlen | 10 |1864| Semendire | 10 |1864| II 4¾-inch Krupp. Iskodra | 10 |1864| Podgoritza | 10 |1864| ---------------------+----+----+------------------------------------ MESS OUDIEH. NUSS RATIJH. Armored belt and casemate, ram bow, round stern, single screw, full sail-power. Sister-ships to the Superb (English). The armored belt rises to the height of the main-deck beams, but does not cover the point of the ram. The casemate is of the same type as that of the Hercules, but longer, the sides being recessed forward and abaft for angular ports. Fore-and-aft fire is obtained from unprotected bow and stern-guns on the spar-deck, working in single ports. [Illustration: MESS OUDIEH.] AZIZIE. MAHMUDIE. ORCHANIE. OSMANIE. Completely armored broadside frigates, with a low redoubt or traverse on the forecastle. Swan-breasted ram bow, round stern, single screw, full sail-power. The bow traverse protects two forward guns, each working in two ports, for bow and beam fire. This traverse rounds off the spar-deck rail some distance abaft the stern, which is carried up as a support for the bow-sprit. Armored pilot-house at the rear of the traverse. [Illustration: AZIZIE.] ASSAR I TEFVIK. Armored belt, casemate, and two barbette turrets. (See Victorieuse.) Ram bow, dome stern, single screw, full sail-power. Built in France. FETH I BULEND. MUKADEMME I HAIR. Armored belt and casemate, ram bow. (See Mess oudijeh.) IDSCHLALIE. ASSAR I SCHEFKET. NEDSCHIN I SCHEFKET. Armored belt, casemate, and single barbette turret amidships, at after-end of casemate. Ram bow, round stern, full sail-power. AVNI ILLAH. MUIN I ZAFFIR. Armored belt; two octagonal redoubts having an overhang and connected by an armored curtain in such a manner as to give the plan the appearance of a violin. Ram bow, no deck armor. Built at Constantinople. [Illustration: AVNI ILLAH.] HUFZ I RAHMAN. Double-turreted monitor, the forward turret being larger than the after one. Tripod masts. Traverse at the bow. The turrets are revolved by hand-power. HEZBER. Single-turreted, light-draft monitor. American type. FETH I ISLAM. BEURTLEN. SEMENDIRE. [Illustration: BEURTLEN.] Light-draft, armored belt and casemate vessel; casemate rising above deck with ports on all sides. TURKISH UNARMORED FLEET. -----------------------+----------+---------+------ TYPE AND NAME. | Tonnage. | Date of | Guns. | | Launch. | | Tons. | Year. | -----------------------+----------+---------+------ Ship of the Line. | | | Fethie | 3,380 | 1855 | 67 -----------------------+----------+---------+------ Frigates. | | | Ertogrul | 3,344 | 1863 | 41 Hudavendighai | 2,897 | 1860 | 41 Selimie | 4,717 | 1865 | 55 Muhbiri Surur. | 1,477 | 1851 | 22 X (not yet named) | 1,621 | Building| 9 -----------------------+----------+---------+------ Corvettes. | | | Sinope | 800 | 1859 | 12 Brussa | 800 | 1859 | 12 Mensuré | 800 | 1863 | 12 Muzafer | 800 | 1863 | 12 Libnan | 800 | 1864 | 12 Edirné | 800 | 1859 | 12 Ismid | 800 | 1859 | 12 -----------------------+----------+---------+------ Transports. | | | Schaar i Nusret | 3,029 | 1869 | 2 Mevret i Nusreb | 3,029 | 1869 | 2 Sultanie | 2,902 | 1861 | 4 Babel | 1,733 | 1868 | Taif | 1,609 | 1871 | 4 Assyr | 1,609 | 1875 | 4 Mukademie Nusret | 2,132 | 1875 | Mukademie Scheref | 2,132 | 1875 | Peiki Mesret | 2,132 | 1877 | Rechbir i Zevfik | 2,132 | 1878 | Feiz i Bahri | 1,490 | 1848 | 4 Essir i Djedid | 1,108 | 1841 | 6 Peiki Schfhet | 465 | 1853 | 4 Essei i Hair | 313 | 1839 | 4 -----------------------+----------+---------+------ Sloops. | | | Izzedin | 1,075 | 1865 | 4 Ismail | 1,075 | 1865 | 4 Zhalia | 1,075 | 1865 | 4 Fuad | 1,075 | 1865 | 4 Candia | 955 | 1863 | 6 Chania | 829 | 1863 | 3 Pertefi Prale | 909 | 1868 | Rethmo | 777 | 1869 | 3 Arkadi | 767 | 1867 | 6 Mudai i Zafir | 1,385 | 1869 | 4 Essir i Nazret | 1,385 | 1869 | 4 -----------------------+----------+---------+------ Schooners. | | | Iskenderje | 609 | 1862 | 9 Zohaf | 609 | 1862 | 9 Mehrih | 609 | 1863 | 9 Uthraret | 609 | 1863 | 8 Beirut | 609 | 1859 | 12 Seddul Bahr | 609 | 1859 | 12 -----------------------+----------+---------+------ Steamers. | | | Sijar | 220 | 1865 | 4 Mossul | 220 | 1865 | 4 Istankieni | 203 | 1874 | Jali Kioschk | 195 | 1869 | 1 Ninali Kavak | 195 | 1869 | 2 Intibah | 258 | 1866 | 4 Liver i Deyeh | 258 | 1866 | 4 Muschdi i Ressan | 258 | 1866 | 4 Schaheddin | 258 | 1866 | 4 Syrat | 184 | 1863 | 2 Suda | 184 | 1864 | 2 Bojana | 80 | | 2 Bai | | | 2 Eurgen | | | 2 -----------------------+----------+---------+---- Sultan’s Yacht, | | | Surreja | 500 | 1865 | 4 -----------------------+----------+---------+---- Dispatch, Transport, | | | and Service Steamers.| | | Sulhie | 180 | 1868 | Esser i Nezhet | 193 | 1847 | 2 Peik i Tjdscheret | 193 | 1845 | 4 Mermere | 153 | 1873 | Eregli | 137 | 1873 | Rustschuk | 112 | 1873 | Jeni Kapu | 112 | 1873 | Dschebali | 112 | 1873 | Kabatsch | 112 | 1873 | Tophané | 112 | 1873 | Rassim Pasha | 77 | 1873 | Dschitana | 78 | 1858 | Funduklu | 77 | 1873 | Oltenitscha | 78 | 1858 | Rechber | 40 | 1863 | -----------------------+----------+---------+--- DANUBE FLOTILLA. -----------------------+----------+---------+--- Gun-boats. | | | Schefket Nuna | 200 | 1864 | 4 Varna | 200 | 1869 | 4 Akka | 200 | 1869 | 4 -----------------------+----------+---------+------ Steamers. | | | Chaireddin | 474 | | 2 Rodos | 203 | 1874 | Isalahat | 120 | 1873 | -----------------------+----------+---------+--- UNITED STATES. IRON-CLAD FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Indicated Horse-power. F = Maximum Speed. -------------------------+-----+----+----+-------+-------+------ TYPE AND NAME | A | B | C | D | E | F -------------------------+-----+----+----+-------+-------+------ | Ft. | Ft.| Ft.| Tons. | |Knots. Double-turreted Monitors. Amphitrite | 250 | 55 | 14 | 3,815 | 1,800 | 12 Miantonomoh | 250 | 55 | 14 | 3,815 | 1,800 | 12 Puritan | 280 | 60 | 17 | 5,000 | 3,500 | 13 Monadnock | 250 | 60 | 14 | 3,815 | 1,800 | 12 Terror | 250 | 55 | 14 | 3,815 | 1,800 | 12 -------------------------+-----+----+----+-------+-------+------ Single-turreted Monitors. Ajax | 225 | 44 | 13½| 2,100 | 350 | 8 Canonicus | 225 | 44 | 13½| 2,100 | 450 | 8 Camanche | 200 | 46 | 11½| 1,875 | 350 | 8 Catskill | 200 | 46 | 11½| 1,875 | 350 | 8 Dictator | 312 | 50 | 20½| 4,500 | 3,500 | 8 Jason | 200 | 46 | 11½| 1,875 | 350 | 8 Lehigh | 200 | 46 | 11½| 1,875 | 350 | 8 Mahopac | 225 | 44 | 13½| 2,100 | 450 | 8 Manhattan | 225 | 44 | 13½| 2,100 | 450 | 8 Montauk | 200 | 46 | 11½| 1,875 | 350 | 8 Nahant | 200 | 46 | 11½| 1,875 | 350 | 8 Nantucket | 200 | 46 | 11½| 1,875 | 350 | 8 Passaic | 200 | 46 | 11½| 1,875 | 350 | 8 Saugus | 225 | 44 | 13½| 2,100 | 450 | 8 -------------------------+-----+----+----+-------+-------+------ G = Armor Side. H = Armor Turret. I = Backing. J = Date of Launch. -------------------------+----+----+----+--------+------------------ TYPE AND NAME. | G | H | I | J | BATTERY. -------------------------+----+----+----+--------+------------------ | In.| In.| In.| Year. | Double-turreted Monitors. Amphitrite | 7 | 10½| 8 |Building| Miantonomoh | 7 | 10½| 8 | 1876 | Puritan | | | |Building| IV 10-inch B.L.R. Monadnock | 7 | 10½| 8 | ” | Terror | 7 | 10½| 8 | ” | -------------------------+----+----+----+--------+------------------ Single-turreted Monitors. Ajax | 5 | 10 | 4 | 1865 | Canonicus | 5 | 10 | 4 | 1864 | Camanche | 5 | 11 | 6 | | Catskill | 5 | 11 | 6 | 1863 | Dictator | 6 | 15 | | | Jason | 5 | 11 | 6 | | II 15-inch S.B. Lehigh | 5 | 11 | 6 | 1863 | Mahopac | 5 | 10 | 4 | 1863 | Manhattan | 5 | 10 | 4 | | Montauk | 5 | 11 | 6 | | Nahant | 5 | 11 | 6 | 1863 | Nantucket | 5 | 11 | 6 | 1863 | Passaic | 5 | 11 | 6 | 1862 | Saugus | 5 | 10 | 4 | | -------------------------+----+----+----+--------+------------------ AMPHITRITE. MIANTONOMOH. PURITAN. MONADNOCK. TERROR. Double-turreted, low-freeboard monitor vessels. No overhang. Turrets suspended on a central spindle on the Ericsson system. Resting normally on their bases, but elevated for revolving by means of hydraulic presses. Conning tower on top of each turret. Light flying deck between the turrets, with a ventilating shaft rising just abaft the smoke-stack. Twin screws. [Illustration: MIANTONOMOH.] THE FIFTEEN SINGLE-TURRETED MONITORS. Old-type, single-turreted, low-freeboard monitors. All except the Dictator have an overhang. In some the turrets are raised by driving wedges under the spindle; in others by hydraulic presses. Conning tower on top of the turret. Laminated plating. [Illustration: PASSAIC.] INTREPID. Armored torpedo vessel. Ram bow, round stern, twin screws, partial sail-power. The armored belt, made up of five inches of laminated plating, encircles the water-line to the height of the upper-deck beams. The lower part of the smoke-stack is protected by a belt of nine inches of laminated plating. The deck is made up of two ¾-inch thicknesses of plate covered by a wooden deck. The pilot-house forward is musket-proof. The hull is of iron, with a wood backing to the armor of eleven inches. Aft is a light wooden superstructure, forming quarters for officers. The vessel carries no guns and is provided with torpedo-spars (one forward and four broadside). [Illustration: INTREPID.] ALARM. Partially armored torpedo gun-boat. Ram bow, pointed stern. Mallory steering-screw; no sail-power. The bow of the vessel is provided with an armored traverse of four inches thickness, the remainder of the hull being unprotected. One 15-inch smooth-bore is carried forward, firing only straight ahead. It is the intention to replace this by a 10-inch rifle. The hull is of iron and double, with cellular compartments and water-tight compartments in addition. Three torpedo-spars are projected. One from the snout of the ram a distance of 30 feet, and one from each beam 17 feet. Musket-proof pilot-house aft. Steel ⅜-inch deck-plate under a wooden deck. [Illustration: ALARM.] UNITED STATES GENERAL-SERVICE FLEET. A = Length between Perpendiculars. B = Breadth of Beam. C = Maximum Draft. D = Displacement. E = Indicated Horse-power. F = Maximum Speed. G = Date of Launch. ----------------+-----+----+-----+-------+-------+-----+-------- TYPE AND NAME. | A | B | C | D | E | F | G ----------------+-----+----+-----+-------+-------+-----+-------- | Ft. | Ft.| Ft. | Tons. | |Knots| Year Frigates. Colorado | 264 | 53 | 23¼ | 4,772 | 997 | 9 | 1855 Franklin | 270 | 54 | 25½ | 5,162 | 2,000 | 10 | 1865 Minnesota | 265 | 51 | 24 | 4,833 | 993 | 9 | 1855 Wabash | 262 | 51 | 23½ | 4,774 | 1,039 | 10 | 1855 Tennessee | 335 | 45 | 22½ | 4,105 | 2,500 | 10 | 1865 ----------------+-----+----+-----+-------+-------+-----+-------- Corvettes. Lancaster | 236 | 46 | 19 | 3,291 | 2,000 | 9 | 1858 Brooklyn | 233 | 43 | 19 | 2,686 | 705 | 9 | 1858 Pensacola | 231 | 45 | 20 | 2,852 | 2,000 | 10 | 1858 Hartford | 225 | 44 | 18 | 2,826 | 696 | 8 | 1858 Richmond | 225 | 43 | 17 | 2,604 | 2,000 | 9 | 1858 Trenton | 253 | 48 | 21¾ | 3,900 | 3,500 | 13 | 1876 Powhatan | | | 18¾ | 3,980 | 1,500 | 10 | 1850 Alaska | 251 | 38 | 17½ | 2,394 | 1,150 | 12½ | 1868 Benicia | 251 | 38 | 17½ | 2,394 | 1,150 | 9 | 1868 Omaha | 251 | 38 | 17½ | 2,394 | 1,150 | 12½ | 1868 Plymouth | 251 | 38 | 17½ | 2,394 | 1,150 | 12½ | 1868 Lackawanna | 234 | 38 | 17½ | 2,526 | 1,304 | 9½ | 1862 Ticonderoga | 234 | 38 | 17½ | 2,526 | 1,304 | 12 | 1862 Canandaigua | 225 | 38 | 15 | 2,128 | 1,304 | 8¾ | 1862 Monongahela | 225 | 38 | 17½ | 2,078 | 1,304 | 8½ | 1863 Shenandoah | 225 | 38 | 17½ | 2,070 | 1,304 | 8½ | 1863 Juniata | 205 | 38 | 16 | 1,934 | 1,304 | 8 | 1861 Ossipee | 205 | 38 | 17½ | 1,934 | 1,304 | 8 | 1862 Quinnebaug | 216 | 30 | 11¾ | 1,113 | 1,132 | 11½ | 1875 Swatara | 216 | 30 | 18 | 1,113 | 1,132 | 11½ | 1873 Galena | 216 | 32 | 18 | 1,900 | 1,132 | 12½ | 1877 Vandalia | 220 | 38 | 17½ | 2,080 | 1,132 | 12½ | 1874 Marion | 220 | 38 | 18 | 1,900 | 1,132 | 12½ | 1873 Mohican | 216 | 30 | 18 | 1,900 | 1,132 | 12½ |Building Iroquois | 199 | 34 | 11¾ | 1,488 | 813 | 11½ | 1858 Wachusetts | 199 | 34 | 12½ | 1,488 | 717 | 10 | 1861 Wyoming | 199 | 33 | 11 | 1,475 | 717 | 9¾ | 1858 Tuscarora | 199 | 33 | 12¾ | 1,457 | 717 | 9 | 1862 Kearsarge | 199 | 34 | 12¼ | 1,461 | 822 | 9¾ | 1862 Adams | 185 | 35 | 16½ | 1,375 | 800 | 11½ | 1874 Alliance | 185 | 35 | 16 | 1,375 | 800 | 11½ | 1875 Essex | 185 | 35 | 16¼ | 1,375 | 800 | 10½ | 1874 Enterprise | 185 | 35 | 16 | 1,375 | 800 | 11½ | 1874 Nipsic | 185 | 35 | 12½ | 1,375 | 800 | 11½ | 1878 Narragansett| | | | 1,235 | 1,000 | 9½ | 1858 ----------------+-----+----+-----+-------+-------+-----+-------- 2d Class Corvettes. Alert | 175 | 28 | 13¾ | 1,020 | 560 | 9½ | 1874 Ranger | 175 | 28 | 13½ | 1,020 | 560 | 9½ | 1874 Kansas | 180 | 30 | 13½ | 900 | 670 | 9½ | 1864 Saco | 180 | 30 | 13½ | 900 | 670 | 9½ | 1865 Shawmut | 180 | 30 | 13½ | 900 | 670 | 9 | 1865 Yantic | 180 | 30 | 13¾ | 900 | 670 | 9½ | 1878 ----------------+-----+----+-----+-------+-------+-----+-------- Paddle Steamers. Ashuelot | | | | 1,370 | 1,468 | 8 | 1864 Monocacy | | | | 1,370 | 1,468 | 8 | 1864 Michigan | | | | 685 | 750 | 9 | 1844 Rio Bravo | | | | | | 6 |Purchased ----------------+-----+----+-----+-------+-------+-----+-------- Torpedo Vessels. Alarm | 173 | 28 | 11 | 720 | 800 | 11 | 1873 Intrepid | 170 | 35 | 12 | 1,123 | 800 | 9 | 1874 ----------------+-----+----+-----+-------+-------+-----+-------- ----------------+--------------------------------------------------- TYPE AND NAME. | BATTERY. ----------------+--------------------------------------------------- Frigates. | Colorado | I 11-inch, XLII 9-inch, II 100-pdrs., II 20-pdrs. Franklin | I 11-inch, XXXVIII 9-inch, IV 100-pdrs. +--------------------------------------------------- Minnesota | Wabash | I 11-inch, XLII 9-inch, II 100-pdrs. +--------------------------------------------------- Tennessee | ----------------+--------------------------------------------------- Corvettes. | Lancaster | II 11-inch, XX 9-inch. +--------------------------------------------------- Brooklyn | II 11-inch, XVIII 9-inch, II 60-pdrs. Pensacola | +--------------------------------------------------- Hartford | II 11-inch, XVI 9-inch, II 20-pdrs. Richmond |XII 9-inch, II 100-pdrs., I 20-pdrs. Trenton | XI 8-inch, II 20-pdrs. Rifles. Powhatan | I 11-inch, XIV 9-inch, II 100-pdrs. +--------------------------------------------------- Alaska | Benicia | I 11-inch, X 9-inch, Omaha | I 60-pdr., II 20-pdrs. Plymouth | +--------------------------------------------------- Lackawanna | II 11-inch, VIII 9-inch, II 20-pdrs. Ticonderoga | II ” VIII ” I 60-pdr., II 20-pdrs. Canandaigua | II ” VIII ” II 20-pdrs. Monongahela | II ” VIII ” I 60-pdr. Shenandoah | II ” VIII ” I ” II 20-pdrs. +--------------------------------------------------- Juniata | I 11-inch, VI 9-inch, Ossipee | I 60-pdr. +--------------------------------------------------- Quinnebaug | I 8-inch, I 60-pdr. (rifles), Swatara | VI 9-inch. +--------------------------------------------------- Galena | +--------------------------------------------------- Vandalia | I 11-inch, VI 9-inch, I 60-pdr. Marion | +--------------------------------------------------- Mohican | +--------------------------------------------------- Iroquois | II 11-inch, IV 9-inch, III 20-pdrs. Wachusetts | II 11-inch, IV 9-inch, I 60-pdr. Wyoming | II ” IV ” I 20-pdr. +--------------------------------------------------- Tuscarora | II 11-inch, IV 9-inch, II 20-pdr. Kearsarge | +--------------------------------------------------- Adams | Alliance | Essex | I 11-inch, IV 9-inch, I 60-pdr. Enterprise | Nipsic | +--------------------------------------------------- Narragansett| II 11-inch, IV 9-inch, II 20-pdrs. ----------------+--------------------------------------------------- 2d Class Corvettes. Alert | Ranger | Kansas | I 11-inch, II 9-inch, I 60-pdr. Saco | Shawmut | Yantic | ----------------+--------------------------------------------------- Paddle Steamers.| Ashuelot | IV 8-inch, II 60-pdrs., II 20-pdrs. Monocacy | +--------------------------------------------------- Michigan | VIII 20-pdrs. Rio Bravo | Howitzers. ----------------+--------------------------------------------------- Torpedo Vessels.| Alarm | I 15-inch. Intrepid | No guns. ----------------+------------------------------------- ---------------+-------------- TYPE AND NAME. | Displacement. ---------------+-------------- | Tons. Gun-boats. | Palos | 306 Dispatch | 730 Fortune | 306 Mayflower | 306 Leyden | 306 Nina | 306 Pinta | 306 Speedwell | 306 Triana | 306 Standish | 306 Catalpa | 191 Pilgrim | 168 ---------------+-------------- These Gun-boats are at present unarmed, and, with the exception of the Palos and Dispatch, are used as Tenders at dock-yards. The Palos is in service in China; the Dispatch is in service as a cruising gun-boat. TENNESSEE. Iron-braced, wooden, rapid steam frigate. Straight bow, strengthened and provided with a bronze ram; round stern, single screw, full sail-power. No heavy bow-fire. TRENTON. Iron-braced, wooden, first-class corvette (second-rate frigate). Ram bow, round stern, single screw, full sail-power. Bow-fire fully developed from four 8-inch rifles. Bower and sheet chains coming in on the berth-deck, leaving the forward part of the gun-deck clear for working the forward guns. Gun-deck battery of eight 8-inch rifles in broadside; spar-deck battery, two 8-inch pivot-guns forward giving bow and beam fire, and one 8-inch pivot-gun aft giving stern and beam fire. [Illustration: TRENTON.] POWHATAN. Old-fashioned wooden paddle-wheel frigate. ASHUELOT. MONOCACY. Iron, paddle-wheel, double-ender corvettes. These vessels were originally provided with a rudder at each end, but the forward one is removed. They can carry in addition to their present armament one 11-inch pivot forward and one 11-inch pivot aft. Musket-proof pilot-house on the hurricane-deck. [Illustration: ASHUELOT.] MICHIGAN. Old-fashioned iron, paddle-wheel gun-boat carrying a battery of boat-guns. RIO BRAVO. Light-draft river steamer carrying a battery of boat-guns. (Purchased.) DISPATCH Rapid dispatch vessel carrying a battery of boat-guns. (Purchased.) The remainder of the fleet is made up of the ordinary general-service type of corvettes and gun-boats. [Illustration: ALASKA.] [Illustration: ESSEX.] [Illustration: PINTA.] THE PRINCIPAL NAVAL BATTLES OF TWENTY YEARS. 1860-1880. I. BOMBARDMENTS OF EARTHWORKS. II. BOMBARDMENTS OF MASONRY FORTS. III. PASSAGES OF FORTS. IV. DASHES. V. ASSAULTS. VI. DELIBERATE GENERAL ACTIONS. VII. IRON-CLADS AGAINST WOODEN VESSELS. VIII. DUELS. BOMBARDMENTS OF EARTHWORKS. _Earthworks at Hatteras Inlet, August 28 and 29, 1861._ FEDERAL. WOODEN SQUADRON. Guns. Minnesota 46 Wabash 45 Susquehanna 17 Sailing Corvette Cumberland 24 Pawnee 15 Monticello 6 Harriet Lane 5 CONFEDERATE. _Fort Clark._—Water-battery mounting 5 guns. _Fort Hatteras._—Earthwork mounting 20 guns. Early on the morning of the 28th, the Wabash, with the Cumberland in tow, led in to attack Fort Clark, followed by the Minnesota and later by the Susquehanna. This battery was bombarded for three hours, the ships passing and repassing, when it was deserted and not reoccupied. The remainder of the squadron were employed during the forenoon landing troops, but owing to the rough surf only landed 300 men, who occupied and raised a flag on Fort Clark, but took no part in the action at any time. Late in the afternoon fire from the whole fleet was opened on Fort Hatteras and continued for two hours, when the ships drew out of action for the night. At 8 a.m. next day, the frigates led in and opened the engagement, continuing it for three hours, when Fort Hatteras surrendered. Six hundred and seventy prisoners were taken in addition to the forts with their armaments. The gun-boats were slightly injured, and four or five men wounded. Loss of the Confederates unknown beyond 18 wounded prisoners. _Earthworks at Hilton Head, November 7, 1861._ FEDERAL. MAIN SQUADRON. Guns. Wabash 45 Susquehanna 17 Mohican 7 Seminole 6 Pawnee 15 Unadilla 6 Ottawa 5 Pembina 4 Vandalia 22 (In tow of a light gun-boat.) FLANKING SQUADRON. Bienville 11 Seneca 4 Curlew 6 Penguin 9 Augusta 10 CONFEDERATE. _Fort Walker._—II 6-inch rifles, XII 32-pdrs., I 10-inch, II 8-inch, III 7-inch, I 42-pdr., II 12-pdrs., smooth-bores = 23 guns. _Fort Beauregard._—VIII 32-pdrs., I 6-inch rifle, V 42-pdrs., I 10-inch, I 8-inch, II 24-pdrs., II 6-pdrs. = 20 guns. At 8.30 a.m. the main squadron formed in line ahead, and passing in between the forts turned towards Fort Walker, delivering their broadsides as they passed within 600 yards. Turning, they passed Fort Beauregard (across the channel and two miles from Fort Walker), delivering broadsides. On the third time passing Fort Walker, it was deserted and taken possession of. Fort Beauregard had been silenced sooner and was taken possession of in the afternoon. The flanking squadron had been sent to attack a flotilla of Confederate gun-boats, which retreated up the river; they then took part in the general engagement. Federal loss, 8 killed, 23 wounded. Duration of action, five hours. _Earthworks on the Mississippi, February 6, 1862._ FEDERAL. VAN DIVISION—IRON-CLAD GUN-BOATS. Guns. Cincinnati 13 Essex 7 Carondelet 13 St. Louis 13 REAR DIVISION—WOODEN GUN-BOATS. Guns. Conestoga 7 Taylor 7 Lexington 7 CONFEDERATE. _Fort Henry._—Twenty guns, mostly of heavy calibre. The squadron advanced in two divisions, line abreast, the iron-clads leading, and opened fire at 1700 yards, slowing down and approaching to 600 yards. Stopping at this position, the action continued for an hour and a quarter, when the fort surrendered. During this engagement the Cincinnati was struck 31 times, Essex 15 times, St. Louis 7 times, Carondelet once. Casualties, 2 killed, 37 wounded, of whom 28 were scalded by the steam from the boiler of the Essex, which was pierced. _Earthworks at Roanoke Island, February 7, 1862._ FEDERAL. GUN-BOAT FLEET. Guns. Stars and Stripes 5 Louisiana 5 Hetzel 2 Underwriter 4 Delaware 3 Valley City 5 Southfield 4 Hunchback 4 Morse 2 Whitehead 1 Seymour 2 Shawsheen 2 Lockwood 3 Ceres 2 Putnam 1 Brincker 1 Granite 1 CONFEDERATE. Fort Bartow 8 ” Blanchard 4 ” Huger 12 ” Ellis 4 ” Forrest 9 Park Point water-battery 3 Eight light gun-boats mounting 17 guns. The Federal fleet had convoyed a squadron of army transports carrying 17,000 men, for the purpose of landing them and then silencing the batteries so that they could be captured by the troops. The fleet, having taken up an irregular position owing to the shallow water, opened fire at 11 a.m. At 3 p.m. the landing of troops was commenced and was completed before dark, when the fleet ceased firing. At daylight on the 8th firing was recommenced. At 1 p.m. a row of obstructions across the channel was broken through and the Confederate gun-boats were driven up the river. By 3 p.m. the works were all silenced and in the hands of the troops. Loss, 6 killed, 17 wounded, eight of the latter by the explosion of a rifled 80-pdr. _Earthworks on the Mississippi, February 14, 1862._ FEDERAL. IRON-CLAD GUN BOATS. Guns. St. Louis 13 Carondelet 13 Louisville 13 Pittsburg 13 WOODEN. Taylor 7 Conestoga 7 CONFEDERATE. _Fort Donelson._—A triple row of earthworks, one behind and above the other, mounting in all 20 guns. The gun-boats advanced in two divisions, line abreast, at 3 p.m., and opened fire at 600 yards, holding their position for an hour and a half, when they drifted out of action disabled, having only silenced the water-battery: 10 killed, 44 wounded. The steering-gear of the St. Louis and the Louisville was shot away, and the other vessels were forced out of action on account of shots between wind and water. _Earthworks on the James River, May 15, 1862._ FEDERAL. IRON-CLADS. Guns. Galena 6 Monitor 2 WOODEN. Aroostook 6 Port Royal 6 Naugatuck 6 CONFEDERATE. _Fort Darling._—A strong earthwork, built on a perpendicular bluff about 200 feet above the river, mounting 14 heavy guns. [Illustration: CARONDELET. United States Iron-clad River Gun-boat, used with great success during the Civil War.] The iron-clads moved up to within 600 yards, which was as close as they could come and reach the fort with their guns. The wooden vessels came to within about 1400 yards and the squadron anchored, and, springing their broadsides on the fort, opened fire. The action continued four hours, when the ammunition of the Galena giving out and no impression having been made on the fort, the squadron drew out of action: 13 killed, 14 wounded. All the casualties except two wounded happened on board the Galena, an experimental iron-clad. She was so much cut up that her armor was removed and she was made a wooden gun-boat. The Monitor was uninjured. _Earthworks at Fort Hindman, January 10 and 11, 1863._ FEDERAL. IRON-CLAD GUN-BOATS. Guns. Louisville 13 Baron de Kalb 13 Cincinnati 13 Lexington 7 Black Hawk 6 Rattler 6 CONFEDERATE. _Fort Hindman_, Arkansas River.—A quadrangular earthwork, mounting 10 guns, two of the heaviest being in armored casemates. At 5 p.m. of the 10th, the Louisville, De Kalb, and Cincinnati moved up in line abreast to within 400 yards and opened fire. As soon as the fire of the forts slackened the Lexington and Black Hawk moved up and opened with shrapnel, while the Rattler passed up the river and took the fort in enfilade. Ceased firing and drew out of action at dark. In the morning the attack was renewed in the same manner, and the fort surrendered in four hours. Casualties, 5 killed, 23 wounded. The two casemates were completely shattered and every gun dismounted. _Earthworks at Grand Gulf, April 29, 1863._ FEDERAL. IRON-CLAD GUN-BOATS. Guns. Louisville 13 Carondelet 13 Mound City 13 Pittsburg 13 Tuscumbia 5 Benton 16 Lafayette 6 CONFEDERATE. _Grand Gulf Batteries_, Mississippi.—Consisting of one fort 75 feet high, mounting four heavy rifles, and one fort farther down the river mounting four heavy rifles. The Louisville, Carondelet, Mound City, and Pittsburg moved down in line ahead and attacked the lower battery, silencing it an hour, and then moved up to the support of other vessels against the upper one. The action continued five hours and a half, and the batteries being silenced the flotilla drew out of action, expecting the army to assault and take possession. This was not done, and the next day the flotilla was ordered to attack again. The batteries were both found deserted and the guns spiked, except three which had been dismounted by the firing. Casualties: Lafayette, 1 wounded; Benton, 7 killed, 12 wounded; Louisville, none; Tuscumbia, 5 killed, 24 wounded; Mound City, none; Carondelet, none; Pittsburg, 6 killed, 12 wounded. The Benton was hit 47 times; 12 shots pierced the ⅝-inch armor, 4 shots pierced the 2½-inch casemate armor, and 1 shot pierced the 1½-inch armor of the pilot-house. Louisville hit 7 times, Tuscumbia 81 times, Pittsburg 35 times. _Earthworks at Simonoseki, July 11, 16, and 20, 1863, and September 5, 1864._ These attacks were made by vessels of different nationalities on a series of earthworks lining the narrow straits of Simonoseki, Japan. July 11, the Dutch corvette Medusa entered the straits, and being fired at opened fire on the batteries at a distance of 1200 yards. The action continued one hour, when the Medusa drew out without having silenced the batteries. Casualties, 4 killed, 5 wounded. On the 10th, the United States corvette Wyoming entered the straits, and on being fired at opened a return fire. Passing between two sailing gun-boats on one side and a steam gun-boat on the other at pistol-shot distance, she gave them both broadsides, sinking the sailing vessels and blowing up the boiler of the steamer. Action continued an hour and a half, when the Wyoming drew out without silencing the batteries. Casualties, 4 killed, 7 wounded. On the 20th, the French frigate Semiramis and corvette Tancrède entered the strait, and on being fired at returned the fire. The first broadside blew one of the earthworks to pieces. In two hours the forts were silenced, and a landing party spiked the guns and blew up the magazine. On the 5th of September, 1864, an allied squadron of English, French, Dutch, and American vessels, 16 in number, mounting 200 guns, and carrying 3500 men, anchored in the straits and opened fire on the batteries. The batteries were silenced and deserted in about two hours. The next day a force of 2600 men was landed, the guns were spiked and the fortifications were dismantled. Casualties, 12 killed, 60 wounded. _Earthworks at Kagosima, August 15, 1863._ ENGLISH. Guns. Euryalus 35 Pearl 24 Perseus 17 Argus 6 Race-horse 4 Havoc 2 Coquette 2 JAPANESE. KAGOSIMA DEFENCE. One fort containing four guns. One fort containing twenty guns. The corvettes advanced in line ahead on the four-gun battery, delivering their broadsides as they passed, silencing the fort and leaving it to the care of the gun-boats. Passing on to within 1200 yards of the twenty-gun battery they bombarded it for six hours, having to contend with a typhoon at the same time. During the action the city of Kagosima was accidentally set on fire and nearly half of it was burned. The fort was not silenced at dusk, when the squadron hauled out of action, but the next morning the Japanese came to terms before the attack was renewed. _Earthworks off Charleston Harbor, July 18 and August 17, 1863._ FEDERAL. INNER LINE—IRON-CLADS. Guns. Montauk 2 New Ironsides 20 Catskill 2 Nantucket 2 Weehawken 2 Patapsco 2 OUTER LINE—WOODEN GUN-BOATS. Paul Jones 9 Ottawa 5 Seneca 4 Chippewa 6 Wissahicken 4 CONFEDERATE. _Fort Wagner_.—A strong earthwork, containing 10 heavy guns, and supported by three 4-gun water-batteries. On the 18th of July the iron-clads moved in line, taking up a position abreast the fort and within 1200 yards, the gun-boats firing at long range. At 4 p.m., the tide serving, the iron-clads moved in to 400 yards and completely silenced the fort. Drew out of action at dark, the object of silencing the battery being accomplished. On August 17th the iron-clads moved in abreast the fort to within 450 yards, and silenced the fort in two hours. Drew out of action at noon, the object having been accomplished. _Earthworks at Fort McAllister, March 3, 1863._ FEDERAL. MONITORS. Guns. Passaic 2 Patapsco 2 Nahant 2 CONFEDERATE. _Fort McAllister._—A strong earthwork containing seven heavy guns and one 11-inch mortar. This attack was intended as a test of the strength of monitors to resist a heavy fire. The monitors moved up in line ahead and opened fire, continuing the action for eight hours at a distance of 1200 yards. The forts were not silenced. The Passaic was hit 9 times on the side-armor, no damage; 13 hits on the deck-plating, the deck being crushed through in three places; 5 hits on the turret, no damage; 2 on the pilot-house, no damage; 1 on the roof of the turret, breaking a beam; 4 through smoke-stack—34 hits in all; none killed or wounded. Patapsco one hit on deck; no injury. Nahant no hits. _Earthworks at Fort Fisher, December 24 and 25, 1864, and January 13 and 14, 1865._ FEDERAL. FIRST LINE—IRON-CLADS. Guns. New Ironsides 20 Canonicus 2 Monadnock 4 Saugus 2 Mahopac 2 WOODEN GUN-BOATS. Guns. Nyack 8 Unadilla 6 Huron 4 Pequot 8 Pontoosuc 6 Nereus 2 Kansas 8 SECOND LINE—FRIGATES. Guns. Wabash 45 Powhatan 19 Susquehanna 18 Colorado 45 Minnesota 46 CORVETTES. Guns. Juniata 11 Shenandoah 10 Brooklyn 26 Ticonderoga 10 Tuscarora 10 Mohican 7 Vanderbilt 15 GUN-BOATS. Guns. Seneca 4 Pawtuxet 4 Mackinaw 12 Maumee 4 Yantic 5 ADVANCED SQUADRON OF SECOND LINE—GUN-BOATS. Guns. Monticello 7 Rhode Island 11 Sassacus 6 Chippewa 6 Osceola 8 Tacony 6 St. Jago de Cuba 10 Fort Jackson 6 RESERVE LINE—GUN-BOATS. Guns. Aries Howquah Wilderness Cherokee Vance Anemone Moccasin Eolus Gettysburg Keystone State 13 Banshee Emma Lilian Nansemond Tristram Shandy Britannia Bignonia Governor Buckingham CONFEDERATE. _Fort Fisher_ and a range of isolated batteries containing 36 guns, about one half being rifles. At daylight the fleet steamed in in lines ahead, the first line anchoring abreast the sea-face of the fort within 1300 yards, the second line abreast the salient of the works at 1700 yards, the advanced second line abreast the land-face attacking the outworks; the reserve, out of fire, outside of the second line. The fort was completely silenced in an hour and a quarter. Fire was kept up all day, and 3000 troops were disembarked, but returned without attempting an assault. The enemy’s fire was silenced so quickly that not a person was injured in the fleet. Six 100-pdr. rifles exploded in the fleet, killing 16 and wounding 23. Three gun-boats were partially disabled by the fire from the fort, but went into action next day. On the 25th the same positions were taken by the lines and the fort was silenced in one hour. On January 13th the same positions were taken and the fort was silenced in three hours. Fire was kept up all day, and 8000 troops were landed in three hours. January 15th the same positions were taken, and the fort was silenced in one hour. (For remainder of action of 15th, see _Assaults_.) During these bombardments, every gun on the sea-face (19) was dismounted or disabled. _Earthworks on the Danube, May 6, 1877._ The Turkish double-turreted monitor Luft-i-Dyelil attacked a water-battery on the Danube at a distance of 1800 yards. The Russians replied with rifled field artillery. After an action of one hour the monitor received a shot through her boiler, which blew up and sank the ship. All but one man lost. _Earthworks at Callao, May 2, 1866._ SPANISH. ONE IRON-CLAD FRIGATE, FIVE WOODEN FRIGATES, ONE WOODEN GUN-BOAT. Guns. Numancia 33 Blanca 25 Resolucion 25 Berenguela 16 Villa de Madrid 52 Almansa 38 Vencedora 3 PERUVIAN. _Defences of Callao._—Range of earthworks containing XV 32-pdrs., VI 60-pdrs., IV 9-inch rifles, II iron revolving turrets, IV 9-inch, II light-draft monitors, II 6-inch rifles. The fleet divided into three divisions for the attack of different parts of the line of fortifications, and went into action in line ahead at noon, taking positions at about 1600 yards’ distance and maintaining an action of four hours, when the squadron drew out of action, not having silenced the forts. One battery only silenced through the bursting of a gun. Casualties in the fleet, 38 killed, 150 wounded. The. Villa de Madrid was disabled early in the action by a shot through her boiler. The Resolucion was disabled by a shot through the water-line. Admiral Nuñez wounded. RÉSUMÉ. Total number of earthwork attacks noted, 21. COMPLETE SUCCESS—8. Hatteras Inlet, Hilton Head, Fort Henry, Roanoke Island, Fort Hindman, Grand Gulf, French at Simonoseki, Allies at Simonoseki. PARTIAL SUCCESS—6. Kagosima, Fort Wagner, three attacks on Fort Fisher, second attack on Fort Wagner. FAILURES—7. Fort Donelson, Fort Darling, Dutch at Simonoseki, Americans at Simonoseki, Fort McAllister, Danube forts, Callao. Of the partial successes, all six accomplished the objects of the bombardment. In that of Kagosima the Japanese were brought to terms, and the other five had for their object to silence the forts, which they accomplished. Of the failures, the two attacks on Simonoseki were retaliatory measures, and would probably have succeeded had they been kept up longer. Fort Darling and Fort McAllister were experimental tests, although there are no grounds to believe that the forts would have been silenced had the action been kept up longer. At Fort Donelson, the Danube forts, and Callao the ships were beaten. BOMBARDMENTS OF MASONRY FORTS. _Attack on Fort Sumter, April 7, 1863._ FEDERAL. IRON-CLAD SQUADRON. Guns. Weehawken 2 Passaic 2 Montauk 2 Patapsco 2 New Ironsides 16 Catskill 2 Nantucket 2 Nahant 2 Keokuk 2 CONFEDERATE. _Fort Sumter_, 10 guns, supported by _Fort Moultrie_, 16 guns, and earthworks adjacent mounting 43 guns. The squadron went into action at 2 p.m. in line ahead, approaching Fort Sumter as close as the obstructions would permit (from 500 to 1000 yards), and opened fire. The action lasted two hours, when the fleet withdrew, not having silenced the fort. The Weehawken was hit 53 times, the side-armor being completely shattered in places, the deck broken through once, 36 turret-bolts broken, and at one time the turret was jammed. The Passaic was hit 35 times; her turret was disabled for a time, and one turret-gun was completely disabled; the pilot-house was knocked almost over. Montauk hit 14 times; no injury. Patapsco hit 47 times; gun disabled. New Ironsides hit _about_ 50 times; one port-shutter knocked off, otherwise uninjured. Catskill hit 20 times; deck broken through. Nantucket hit 51 times; port-stopper jammed, disabling one gun. Nahant hit 36 times; turret jammed, side-armor badly shattered. Keokuk (casemated gun-boat) _pierced_ at and below the water-line 19 times; turrets pierced and port-shutters knocked away; vessel sank the next day. Casualties: Keokuk, 16 wounded; Nahant, 1 killed, 6 wounded; all by broken bolts flying in the turret or pilot-house. _Attack on Fort Sumter, August 22 and September 1, 1863._ FEDERAL. IRON-CLAD SQUADRON. Guns. Weehawken 2 Montauk 2 Nahant 2 Passaic 2 Patapsco 2 CONFEDERATE. _Fort Sumter_, supported by _Fort Moultrie_. Squadron went into action at 3 a.m. within 800 yards of Sumter, keeping up a steady fire for three hours. Only six shots fired from Sumter in return, but a heavy fire kept up from Moultrie. Fleet drew out, not having drawn the fire of Sumter. On the night of September 1st the squadron moved in again and bombarded Sumter for five hours. The fort was almost dismantled, but still kept its garrison. Fort Moultrie responded to the fire. The fleet withdrew, not having driven the garrison from the fort. _Bombardment of Mississippi Forts, April 18 to April 28, 1862._ FEDERAL. Twenty mortar-schooners, each armed with a single mortar. For about one hour and a half the forts were under the fire of Admiral Farragut’s fleet of 17 vessels, mounting 188 guns. CONFEDERATE. _Fort Jackson._—A masonry fort on the right bank of the Mississippi, mounting 75 guns. _Fort St. Philip._—A masonry fort on the left bank of the river, nearly opposite Fort Jackson, mounting 30 guns. On the morning of April 18th the mortar-schooners were towed into position in three divisions. The first and third (14 vessels) were moored near the right bank of the river at a bend below Fort Jackson, within 2800 yards of it, and protected by a thick wood, the mast-heads of the schooners being trimmed with branches to conceal their exact position. The second division was moored near the left bank of the river, more exposed and 3700 yards from Fort Jackson. About 1 p.m. fire was opened from all the mortars on Fort Jackson, and continued without interruption until sunset. One mortar only was directed against Fort St. Philip. At the end of the first day’s bombardment two guns had been dismounted and a third heavy rifle broken in two in Fort St. Philip. The citadel of Fort Jackson was set on fire. On the evening of the 18th the second division was transferred to the right bank, the left one being too much exposed. On the 19th, 20th, 21st, 22d, and 23d the bombardment was continued each day, one mortar-vessel being sunk by a rifled shot from Fort Jackson on the 19th. On the night of the 23d and early morning of the 24th an incessant fire was kept up whilst Admiral Farragut’s fleet was passing the forts. On the 25th, 26th, and part of the 27th the bombardment continued, and on the 28th both forts capitulated. Fort Jackson was reduced almost to a ruin, over 800 bombs having fallen in it. Several guns were dismounted and the casemates were cracked through in all directions. Fort St. Philip was not much injured, its fall being a necessary consequence of that of Fort Jackson. RÉSUMÉ. Total number of masonry attacks noted, 4. Successful, 1. Failures, 3. Fort Sumter was, by repeated bombardments for two years, reduced nearly to a total ruin, but was not abandoned until Charleston was captured by General Sherman. Fort Moultrie never was silenced until it was abandoned. Fort Jackson refused to surrender after six days’ constant bombardment by a mortar fleet and an hour’s bombardment from a passing fleet at from 60 to 300 yards, only capitulating at a second summons, when the capture of New Orleans destroyed the last chance of relief. PASSAGES OF FORTS. _Passage of Fortifications below New Orleans, April 24, 1862._ FEDERAL. WOODEN FLEETS.—FIRST DIVISION. Guns. Hartford 28 Brooklyn 26 Richmond 25 Sciota 3 Iroquois 7 Kennebec 4 Pinola 4 Itasca 4 Winona 4 SECOND DIVISION. Pensacola 26 Mississippi 19 Cayuga 6 Oneida 10 Varuna 6 Katahdin 6 Kineo 6 Wissahickon 4 CONFEDERATE. _Fort Jackson_, 75 guns. _Fort St. Philip_, 30 guns. Above the forts, two iron-clad rams and eighteen gun-boats. Below the forts, a heavy boom of logs and chain across the river. The river current to be stemmed runs at a speed of about six to seven knots. On the night of the 22d, two gun-boats were sent up to break the obstructions. The end of the chain was reached and successfully cut under a heavy fire, making an opening wide enough to allow vessels to pass. At 2 a.m. of the 24th the fleet got under way, forming two lines, the first division to take Fort Jackson, and the second Fort St. Philip. The chains were stopped up and down the sides in wake of the boilers; decks were whitewashed and boarding-nettings triced up. Coming under the fire of the forts, the fines were broken owing to the strength of the current and the necessity for feeling the way up in the channel, there being no pilots. The Hartford grounded abreast Fort St. Philip, and whilst in this position a fire-raft was pushed against her, setting her on fire aft. The raft was pushed clear, fire extinguished, and the ship was worked off the shoal. She was hit 32 times; 3 killed, 10 wounded. The Brooklyn fouled the obstructions, and was held for a short time under the fire of Fort St. Philip. Clearing these, she was rammed by the ram Manassas, but the blow was a glancing one. Immediately afterward a gun-boat was seen coming at her full speed. The Brooklyn gave her the port broadside, and disabled her: killed, 9; wounded, 26. Richmond, killed, 2; wounded, 4. Sciota, wounded, 2. Iroquois, killed, 8; wounded, 24. Kennebec fouled the obstructions, and did not get clear until the fleet had passed up; returned to the lower anchorage. Pinola, killed, 3; wounded, 8. Itasca received a shot through her boiler abreast the forts, and drifted down helpless out of action; wounded, 3. The Winona was fouled by the Itasca in getting under way, and did not make the attempt until the fleet had passed, when she was obliged to turn back: killed, 6; wounded, 4. Pensacola, killed, 4; wounded, 33. Mississippi, just after passing the forts, was rammed on the quarter by the Manassas, injured, but not cut through: killed, 2; wounded, 6. Cayuga—the leading vessel in the fight—after passing the forts was attacked by three gun-boats at once: one on the starboard beam she disabled by a broadside; one on the port-bow was driven off by the bow-pivot; one on the port-quarter was taken in hand by the Varuna before she could do harm: wounded, 6. Oneida, just after passing the forts, discovered a gun-boat trying to cross her bow; ran her down and sank her at once: wounded, 3. Varuna, after passing the forts, disabled two gun-boats; was then rammed twice by one gun-boat, and once by another; finding her sinking, her commander ran her ashore, disabling completely both the gun-boats that had rammed him: killed, 3; wounded, 9. Katahdin, uninjured. Kineo, wounded, 8. Wissahickon, uninjured. Total: killed, 37; wounded, 147. The Mississippi, after clearing the fight, was ordered to ram the Manassas, which was seen coming up the river. Running down towards her, the Manassas sheered broad off and ran ashore, receiving two broadsides, which disabled her and set her on fire. She drifted down the river and blew up. Fourteen vessels out of seventeen passed the forts. Of those failing to pass, one was disabled. Of those that passed, one was sunk. Of the Confederate flotilla eleven were captured, and eight—including the ram Manassas—were destroyed. The second ram (Louisiana) did not engage for some reason. Two days afterward, while the flag of truce was flying at the capitulation of the forts, she was set on fire and turned adrift to explode amongst the mortar squadron. She blew up before reaching it. The fleet that passed the forts went into action on the next day (25th), silenced a line of earthworks, and passing up to New Orleans received its surrender. _Passage of Forts, Mississippi River, June 28, 1862._ FEDERAL. Guns. Richmond 25 Hartford 28 Brooklyn 26 Iroquois 7 Oneida 10 Wissahickon 4 Sciota 3 Winona 4 Pinola 4 Katahdin 6 Kennebec 4 CONFEDERATE. Triple line of earthworks at Vicksburg, mounting about 30 guns. At 4 a.m. the squadron, steaming up the river in double line ahead (large ships inside with the smaller ones abreast the intervals), came under the fire of the enemy at a distance of 600 yards. The rate of steaming was about three miles per hour. Three ships (Brooklyn, Kennebec, and Katahdin) failed to pass. The Brooklyn, getting fouled with the mortar flotilla, was detained, and under a misapprehension of orders stopped to silence the battery, and dropped down after daylight. The Kennebec held her position astern of the Brooklyn. The Katahdin, having no orders at all, followed the motions of the Brooklyn. Casualties in the part of the squadron which passed: killed, 15; wounded, 30. Duration, two hours; distance gone while under fire, three miles. _Passage of Forts, Mississippi River, March 14, 1863._ FEDERAL. WOODEN SQUADRON. Guns. Hartford 28 Richmond 25 Monongahela 14 Mississippi 19 Albatross 7 Genesee 8 Kineo 6 CONFEDERATE. _Earthworks at Port Hudson._—A line of earthworks extending at intervals a distance of about three miles, and mounting 70 guns, most all of heavy calibre. At 9 p.m. of the 24th, signal was made to weigh anchor and pass the forts up-stream. The vessels except the Mississippi were lashed in pairs (Hartford and Albatross, Richmond and Genesee, Monongahela and Kineo). The mortar fleet below the forts opened a heavy fire on the works, and two light gun-boats took up an enfilading position and shelled the water-batteries. The Hartford passed up without trouble. The Richmond (slowest vessel in the squadron) reached a bend of the river where she was directly within the cross-fire of the batteries, but could not stem the current even with the help of her tow, so she was obliged to turn and go back. The Monongahela reached the bend and the current forced her ashore for about half an hour; getting off finally she started ahead, but was obliged to stop her engine on account of the heating of the journals; drifted down again out of range. The Mississippi ran aground at the bend, but could not be gotten off. After working for half an hour, her guns were spiked, the ship was fired and deserted, and she blew up. Casualties: killed, 12; wounded, 35; missing, 63. One steam frigate lost. _Passage of Fort Morgan, August 5, 1864._ FEDERAL. MONITORS. Guns. Tecumseh 2 Manhattan 2 Winnebago 4 Chickasaw 4 CORVETTES. Brooklyn 26 Hartford 28 Richmond 25 Lackawanna 14 Monongahela 14 Ossipee 12 Oneida 10 GUN-BOATS. Octarora 10 Metacomet 10 Port Royal 6 Seminole 6 Kennebec 4 Itasca 4 Galena 6 CONFEDERATE. _Fort Morgan._—A masonry fort containing 30 guns. Iron-clad ram Tennessee (six 7-inch rifles). Gun-boats Selma, Morgan, and Gaines. A line of torpedoes and pile obstructions across the channel. [Illustration: Before the Action.] [Illustration: After the Action.] [Illustration: Section through Pilot-House. CONFEDERATE RAM TENNESSEE.] At 5.30 a.m. the fleet got under way and steamed in in two lines ahead, the four monitors in the starboard line slightly leading and nearest the fort. The port line of wooden ships showed the corvettes towards the fort, with each one having a gun-boat lasted along the port side. The fort opened fire at 7.30, the leading ship (Tecumseh) being within 1400 yards. Just abreast the fort the Tecumseh fouled a torpedo and was sunk. The Brooklyn (leading the second line) stopped her engines and threw the line into disorder, but the Hartford pushing on ahead restored the line and led the way in, all the ships passing the fort. On clearing the narrow channel, the gun-boats were cast off and gave chase to the Confederate gun-boats, the Metacomet capturing the Selma, the other two vessels escaping under the fort. At 8.45 the fleet was all in the bay beyond the fort. The Tennessee then made a rush at the Hartford, and Admiral Farragut made the signal to attack with guns and rams. The Monongahela struck the ram first, a square blow, making no impression, but breaking off its own ram. The Lackawanna then struck a fair blow with no impression, but staving its own bow. The Hartford then rammed, striking a glancing blow and swinging alongside, giving a full broadside without effect. The Lackawanna and Hartford then bore down together but collided, the Hartford’s side being cut down almost to the water’s edge by the Lackawanna. The Lackawanna, Monongahela, and Ossipee then bore down at full speed, but sheered off at seeing a white flag hoisted. During the ramming, the monitors got under the stern of the ram and bombarded her casemate with effect. Casualties: killed, 52; wounded, 170. Monitor Tecumseh sunk with all hands except 11. Corvette Oneida disabled abreast the fort by a shot through the boiler, but dragged through the action by her consort. The injuries to the bows of the ramming ships and to the Hartford’s side were not so severe as to at all disable them. Captured, armored ram Tennessee, wooden gun-boat Selma, 280 prisoners. The steering-gear and smoke-stack of the ram were shot away, the port-shutters were jammed so as to disable the guns, and the ship’s frame was racked so as to make her leak, but not badly. The ramming vessels left no marks. _Passage of the Vicksburg Batteries, April 16, 1863._ FEDERAL. IRON-CLAD GUN-BOATS. Guns. Benton 16 Lafayette 6 Louisville 13 Mound City 13 Pittsburg 13 Carondelet 13 Tuscumbia 5 General Price 2 Three army transports. CONFEDERATE. _Vicksburg Batteries_.—47 heavy guns. The vessels started from up the river in line ahead, with the transports in rear, the Tuscumbia acting as rear-guard to prevent the transports turning back when once under fire. Leaving the anchorage at 10.30 p.m., they steamed slowly down until coming within sight of the batteries, when they stopped their engines and drifted. The leading vessel was discovered abreast the first battery and fire was opened. The fleet then started ahead fast returning the fire. Two transports turned and started back, but were driven down again by the Tuscumbia, the three vessels suffering severely in the manœuvring, but passing down successfully. Casualties, 12 wounded. Each gun-boat carried a barge-loaded with coal, on the off side. Two barges were sunk, the remainder were carried through safely. One of the transports was disabled, but was taken in tow under fire and brought safely through. Time under fire, one hour. RÉSUMÉ. Total number of battles passing fortifications, 5. Successful, 3. Partially successful, 2. Of the latter, one failed on account of a misunderstanding of orders, and one on account of the strength of current rendering the ships unmanageable. In all cases the ships passed the main line of fortifications at a distance of less than 600 yards, and all were subjected to a severe well-aimed fire. ASSAULTS. _Assault on Fort Sumter, September 8, 1863._ At 10 p.m., September 8th, a landing party of 300 sailors and 100 marines was put in boats, taken in tow by a tug-boat, and towed to within 1000 yards of the breach at Fort Sumter. One division of 20 men was sent to the north-east face to make a feint, while the main body landed at the breach. Through a general misunderstanding the boats went in irregularly, but a few boats’ crews landed, and, no support being given, they were captured. The expedition was a total failure, no assault being made. Casualties: 3 killed, 27 wounded, 130 prisoners, 11 missing. _Assault on Fort Fisher, January 15, 1865._ The assaulting column, composed of 1600 sailors and 400 marines, formed about a mile from the face of the fort (the fire of the fort being kept under by a heavy bombardment from the fleet) in four lines. The, marines forming the first line, were deployed as skirmishers, and advanced along the beach to a line of rifle-pits and occupied them within 600 yards of the sea-face of the fort. The other three lines advanced by the left flank (parallel to each other) along the beach, reaching the marines, and the column lay down while the fleet shelled the works, the marine line coming abreast the second line of sailors. At the word “Charge,” the column rose and charged by the flank to the stockade, extending from the salient of the fort to the water’s edge. Instead of keeping on past the stockade and then charging by the right flank up to the ditch, which would have brought the lines in proper position, the heads of the column turned up at the stockade and became mixed together. The charge was continued to the parapet, but the confusion of the wrong movement caused a break, ending in a panic, and the whole column retreated under a heavy fire from the fort, leaving about 60 men under the protection of the head of the stockade, who entrenched themselves there and stayed until the fort was taken by the troops entering at the other end of the fort. The assault was a failure in everything except as far as deceiving the besieged, who mistook it for the main assault, and thus permitted the 8000 troops at another point to gain a foothold. Casualties: killed, 80; wounded, 228; missing, 22. _Assault on the Corean Forts, June 11, 1871._ The Monocacy (10 guns) and Palos (4 guns) steamed up the Salée River and disembarked a landing party of 546 sailors and 105 marines, taking with them a battery of seven boat-guns. Five forts were to be captured, situated at distances of from half a mile to three miles. The Monocacy, taking position abreast the first fort, shelled it vigorously, protecting the landing party and driving the Coreans from the earthworks and stone fort in about one hour. The landing party entered without resistance, capturing and destroying two 32-pdrs., six 18-pdrs., and twenty smaller pieces, 2 and 4 pdrs. The advance stopped for the night, the landing party going into camp outside of the fort. At daylight of the 11th the advance recommenced, the Monocacy keeping abreast and shelling the Coreans out of the second fort, which was occupied and dismantled. The citadel about three miles farther up the river was the next point to be captured, and had to be taken by assault. Marching to the crest of a hill within 150 yards of the citadel, the storming party were ordered to lie down for a rest, the skirmishing line of marines keeping up a fire on the parapet. A detachment of men and guns was sent to occupy a commanding position and hold a large body of Coreans in check that was forming in rear, while another detachment was sent to cut off the retreat from the citadel. A deep ravine lay between the storming line and the fort, and the walls of the citadel were twelve feet high, the only entrance being through a small breach made by the fire of the Monocacy. The citadel was stormed, and a foothold gained without a halt, and after a hard hand-to-hand fight, was captured. With the fall of the citadel the other forts were abandoned, whilst the detachment commanding the road of retreat of the Coreans put them under a severe fire. The assault was a complete success. Loss of the Coreans: killed, 243; wounded, unknown; prisoners, 22; five stone forts and 481 pieces of ordnance, comprising eleven 32-pdrs., fourteen 24-pdrs., two 20-pdrs., and the remainder 2 and 4 pdrs.; fifty flags, including the standard of the Generalissimo. Loss of United States: killed, 3; wounded, 10. RÉSUMÉ. Number of assaults noted, 3. Failures, 2. Success, 1. Of the failures, the first was too hastily planned to even make a commencement. Everything was confusion from the time that the boats were cast off from their tows. The second was primarily due to confusion of the assaulting columns at the most critical moment, followed by a panic. DELIBERATE GENERAL ACTIONS. _Gun-boat Flotillas in the Mississippi, June 5, 1862._ FEDERAL. IRON-CLAD GUN-BOATS. Guns. Benton 13 Louisville 13 Carondelet 13 Cairo 13 St. Louis 13 RAMS. Queen of the West 2 Monarch 2 CONFEDERATE. IRON-CLAD GUN-BOATS. Guns. Lovell Beauregard Price Thompson Little Rebel Sumter Bragg Van Dorn On the morning of June 5th, the Federal flotilla descending the river discovered the Confederate flotilla moored at the city of Memphis. The latter formed in double line abreast below the city, and received the attack. The Queen of the West, dashing from the Federal line, rammed the Lovell and sank her at once. In getting clear she was rammed by the Beauregard and seriously injured, though not disabled. The Beauregard was rammed by the Monarch, and at the same time received a shot through her boilers which disabled her; she drifted near the bank of the river and sank. The Price was accidentally rammed and sunk by one of her own flotilla. The Little Rebel was disabled by shot, run ashore and abandoned. The Thompson was set on fire by shells and blown up. The Sumter was captured. The Bragg was rammed and sunk. The Van Dorn escaped down the river. Result: one Federal ram partially disabled; no killed, no wounded. Four Confederate gun-boats sunk, one captured, one blown up, one deserted, and one escaped. Killed and wounded unknown, but many lost by drowning and scalding. Duration of action, twenty minutes. In this fight the Federal fleet had the advantage of fighting down stream, being the ones to make the onset, and having the heavier vessels and batteries. The Confederates took no advantage of the weak steaming powers of the Federal gun-boats. Had they passed up stream, re-formed, and forced the Federals to act on the defensive and fight up stream, the result might have been different. Decisive action. _Battle of Helgoland, May 9, 1864._ DANISH SQUADRON. Guns. Niels Juel 42 Jylland 44 Heimdal 16 AUSTRIAN SQUADRON. Guns. Schwartzenburg 48 Radetzky 31 Three Prussian gun-boats. The two squadrons advanced in line ahead, the Danes coming up on the beam of the Austrians. The Niels Juel joined action with the Schwartzenburg, and the Jylland with the Radetzky, the Heimdal attempting to reach the gun-boats, which steamed up on the unengaged side of the frigates, causing the latter to steam in a circle. The action was fought in this manner, steaming in a circle of which the gun-boats were the centre and the Danes 600 yards outside the Austrians, the Heimdal joining in the attack on the Radetzky. After three hours, the Schwartzenburg was set on fire and the Austrians ran for Helgoland, the Danes hauling off at the neutral-ground limit. Indecisive action. _Battle of Lissa, July 20, 1866._ AUSTRIAN FLEET. IRON-CLAD FRIGATES. Ferdinand Max. Hapsburg. Don Juan d’Austria. Kaiser Max. Prinz Eugen. Salamander. Drache. WOODEN SQUADRON. Five frigates. One corvette. Fourteen gun-boats. ITALIAN IRON-CLAD FLEET. Re d’Italia. Re di Portugalo. Principe di Carignano. Ancona. Castelfidardo. Maria Pia. San Martino. Affondatore. Palestro. Varese, Terribile, and Formidabile not in action. Wooden fleet did not come up. The Austrians advanced in three echelonned lines ahead, the Ferdinand Max (flag-ship) leading the right and advanced iron-clad line. The wooden frigates formed the centre line, and the gun-boats the left and rear. All in close order. The Italians on sighting the Austrian fleet formed in single line ahead, open order, covering a distance of over five miles. The head of the Italian line opened fire on coming within gunshot. The Austrians, turning together eight points to port, sent a broadside into the head of the Italian line and, resuming the former course, immediately pierced the Italian line astern of the third ship (between the Ancona and the Re d’Italia), half of his iron-clads passing through this interval and the other half between the Re d’Italia and the Palestro. The leading Italian division turned to starboard to attack the Austrian wooden fleet, and Tegethoff to foil this manœuvre turned and passed back through the same intervals. The rest of the Italian fleet closing up on the broken Austrian line, and the smoke concealing signals, the action became a mêlée. The Ferdinand Max made two attempts to ram two different vessels, both being avoided by the helm. A third attempt on the Re d’Italia was successful, striking her under the counter and sinking her. At the time, the Re was engaged with three Austrians on his bow and beam. The Italians state that his steering-gear was shot away; the Austrians, that he was backing. Three Austrians (two iron-clads and one wooden frigate) concentrated on the Palestro and set her on fire; she drew out of action and blew up in about an hour. The San Martino, fighting in company with the Re d’Italia, hauled out of action when the latter was sunk. The Affondatore (flag-ship) made two ineffectual attempts to ram, but her clumsy steering-gear and slow speed made the attempts abortive. The Re di Portugalo made a fine attempt to ram the Kaiser Max, which the latter avoided by turning _towards_ the Portugalo and going full speed, the ships rubbing sides, bringing down the Kaiser’s fore-mast, which fell on the smoke-stack and caught fire but was extinguished. The Portugalo then ran the gauntlet of the two iron-clad divisions, reaching her own line, and the Italian fleet hauled out of action, the Austrians not chasing. The Italian loss was two iron-clads; killed, 650; wounded, 40. Austrians, 136 killed and wounded, of whom three quarters belonged to the Kaiser Max. Partial success. DASHES. _Passes of the Mississippi, October 12, 1861._ At 4 a.m. the Confederate ram Manassas steamed suddenly into the Federal squadron at anchor in the Passes below New Orleans— Guns. Richmond 25 Water Witch 3 Union 4 SAILING CORVETTES. Vincennes 10 Preble 11 striking the Richmond a glancing blow. Chains were slipped at once, and the Richmond avoided a second blow by sheering. The ram passed back up the river. On the Confederate side the dash was a failure. On the Federal side the Vincennes was run ashore, deserted, and accident only saved the vessel, a train having been laid to her magazine and fired by Commander Handy. The train is said to have been put out by one of the crew before leaving, and the ship was hauled off after daylight. _Mississippi River, above Vicksburg, July 15, 1862._ At about 7 a.m. the Confederate ram Arkansas made a dash down the river through the Federal squadron lying at anchor. Guns. Hartford 28 Richmond 25 Oneida 10 Iroquois 7 Wissahickon 4 Winona 4 Sciota 4 As she passed through without attempting to ram, broadsides were exchanged. The Arkansas was disabled, but not caught. Federal loss: killed, 5; wounded, 16. _Charleston Blockading Fleet, February 2, 1863._ At about 4 a.m. a Confederate iron-clad ram made a dash from the harbor into the blockading squadron. Guns. Keystone State 13 Housatonic 13 Quaker City 9 Augusta 10 Mercedita 9 Memphis 7 Running at the Mercedita, she rammed her on the starboard beam, and at the same time put a shot through her boiler, completely disabling her. The ram then passed under her stern, demanded and received her surrender, but did not take possession, the crew being paroled. The Keystone State was then attacked, but avoided being rammed, although she received a shot through her boilers, completely disabling her. The ram then retired. Attack successful. Federal loss: killed, 24; wounded, 23; one crew paroled, two vessels disabled. Duration of attack, one hour. IRON-CLADS AGAINST WOODEN VESSELS. _Hampton Roads, March 8, 1862._ On the morning of March 8th the Confederate ram Merrimac entered Hampton Roads, where were lying at anchor the STEAM FRIGATES. Guns. Minnesota 50 Roanoke 50 SAILING FRIGATES. Congress 50 Cumberland 24 St. Lawrence 12 Running directly at the Cumberland, the ram struck her under the counter, sinking her in fifteen minutes. Turning to the Congress, which had slipped her cable and run ashore, the ram took a position under her stern at 50 yards distance, and forced her to surrender after a fight of an hour. Possession was not taken of her, and the ship was fired and deserted, blowing up in a few hours. The Minnesota having grounded where the Merrimac could not get at her, these two engaged at long range, the Roanoke and St. Lawrence taking part for about four hours, when the Merrimac drew out of action leaking badly from the effects of ramming the Cumberland. Federal loss: 2 sailing frigates; killed, 247; wounded, 90. _Roanoke River, April 18, 1864._ At 11 p.m. of the 18th the Confederate ram Albemarle was discovered coming down the Roanoke River. In obedience to previous instructions from the Admiral, the two gun-boats present (Miami, 12 guns, and Southfield, 4 guns) were lashed alongside each other to receive the attack, the intention being to put the ram between the two vessels, and while held by lashings fight her at point-blank on both sides. After lashing, the gun-boats were headed for the Albemarle, going full speed. The arrangement was perfect for a _test_ of the plan. The ram scraping the port side of the Miami with her prow, struck the starboard bow of the Southfield, staving her in forward; the forward lashings were broken, and the gun-boats swung out of the angle of fire after giving but one broadside. The ram backed clear to get room for a blow at the Miami, but the latter, having swung head down stream, escaped. The Southfield sank in about fifteen minutes. Federal loss: killed, 1; wounded, 11; missing, 67; 1 gun-boat sunk. _Albemarle Sound, May 5, 1864._ The squadron blockading Albemarle Sound had received orders that in case the ram Albemarle appeared, the vessels were to form in double line ahead. Guns. Miami 12 Ceres 4 Commodore Hull 6 Seymour 4 Mattabesset 6 Sassacus 6 Wyalusing 4 Whitehead 4 At 4.45 p.m. the Albemarle was sighted coming into the sound accompanied by two small gun-boats. The squadron formed and steamed to meet her, the Mattabesset and Sassacus delivering a broadside in passing at 100 yards. The ram attempted to run the Sassacus down, but the latter avoided her, being thrown out of the line in the manœuvre. Being in the vicinity of one of the Confederate gun-boats, the Sassacus gave her a broadside, received her surrender, and sent her out of action to an anchorage. Turning to resume her place in line, the Sassacus found herself in position to ram the Albemarle, and went at her full speed, striking her fairly amidships, and heeling her over considerably. The two vessels were in close contact for about ten minutes, when the Sassacus swung alongside and received a shot through her boilers, partially disabling her. The ram getting clear drew out of action and steamed up the river, chased for some distance by the squadron. Casualties on the Federal side: killed, 4; wounded, 25; 1 gun-boat disabled. Confederates: 1 gun-boat captured; 1 gun on the ram disabled. The bow of the Sassacus was somewhat broken and twisted, but not sufficient to leak. _Black Sea, July 23, 1877._ On the morning of the 23d the Russian gun-boat Vesta (6 guns), cruising in the sea, made out black smoke on the horizon at early daylight, and steamed towards it. When within less than two miles she discovered it to be the Turkish iron-clad frigate Assav-i-Tefvik (14 guns), and turned to escape; a running fight ensued, lasting for two hours, the Turk slowly overhauling the Vesta. When within about half a mile, a shell from the Vesta exploded in the barbette turret of the Turk, disabling its gun, killing and wounding most of the crew. The latter then hauled on and the Vesta escaped. Action indecisive. Killed and wounded about equal on both sides. _Off Ylo, Peru, May 29, 1877._ The Peruvian iron-clad Huascar, having been taken possession of by a party of insurgents, and having committed depredations against British commercial vessels, was attacked off Iquique by the British frigate Shah and the corvette Amethyst. The Huascar running into shoal water prevented the close approach of the enemy, and the action was continued for about three hours, during which time neither of the British vessels was struck and no notable damage had been done to the Huascar. Just before dark the Huascar cleared the shoals and ran down the coast followed by the British until dark. One Whitehead torpedo was sent at her, but ineffectually. After dark a launch was sent into the bay of Ylo with Whitehead torpedoes for the purpose of sinking the vessel, but she had escaped. Action indecisive. Casualties: Peruvian, killed, 1; wounded, 1. British, none. Neither vessel injured sufficiently to affect her fighting power. The Huascar was manned by a raw crew, causing her fire to be entirely ineffective. _Iquique Harbor, May 21, 1879._ The Peruvian iron-clads Independencia and Huascar appeared off Iquique Harbor on the morning of May 21st, finding there the Chilian gun-boats Esmeralda and Covadonga. The latter on discovering the enemy ran into shoal water, the iron-clads taking a position about 2000 yards away. After a short action, the Covadonga (apparently with the intention of dividing the fire and possibly escaping) attempted to run down the coast, the Independencia giving chase. The Huascar continued to engage the Esmeralda, and notwithstanding the short range, failed to hit her. At length a shore battery drove the Esmeralda into deep water, and before she could commence to manœuvre a shot from the Huascar disabled her engines. The Huascar then rammed her three times, the first two blows being total failures on account of stopping the ship too quick. The third was a success, sinking the Esmeralda with her colors flying. The Covadonga, keeping in shoal water as much as possible, ran for two hours, the Independencia making three attempts to ram her and failing. At the fourth attempt the ship was missed, and the Independencia struck a rock and hung fast. The Covadonga at once turned, and taking a position under the Peruvian’s stern, opened fire on him and forced him to surrender. The Huascar appearing at this time, possession could not be taken, and the Covadonga escaped. Attempts to haul the Peruvian off the rocks proving unavailing, she was fired and burned. In this action the Chilians lost the greatest number of men owing to the sinking of the Esmeralda, but the loss of the Independencia more than counterbalanced it. DUELS. _Monitor and Merrimac, March 9, 1862._ On the morning of the 9th the Merrimac steamed into Hampton Roads to finish the destruction of the wooden squadron which she had attacked the day previous (see page 166). The Monitor having arrived during the night steamed out to meet her after she had approached within gunshot of the Minnesota. After a short engagement at a distance of 200 yards, the Merrimac attempted to ram or force a surrender of the Minnesota, in doing which she ran ashore, and was for a short time exposed to the full broadside fire of the frigate. Getting clear, she again turned to the Monitor, and attempted to ram her, striking a slight ineffectual blow. The Merrimac kept on down the channel, the Monitor chasing for some distance, but hauling out of action when she found her speed and artillery power not sufficient to bring the Merrimac to terms. Casualties on the Monitor, 1 wounded, 2 temporarily disabled by the shock of the projectiles striking the turret against which they happened to be leaning. Action indecisive. _Alabama and Hatteras, January 11, 1863._ The Hatteras (6 guns) proceeding to blockade duty off Galveston went in chase of a sail on the morning of the 11th, and running close to her, stopped and hailed. The answer returned was “Her Majesty’s Steamer Vixen.” The Hatteras then lowered a boat and sent it alongside. Before the boat was fairly started the hail came, “We are the Confederate steamer Alabama,” accompanied by a broadside. The fire was returned at once, and the Hatteras attempted to close and board, but could not. In about five minutes she had been set on fire by one shell and her boiler was pierced by another. The Alabama then took a position under her stern, and in a few minutes forced her to surrender, the crew being transferred to the Alabama, and the Hatteras left to burn and blow up. Casualties: on the Hatteras, killed, 2; wounded, 5. Action decisive. (For fighting power of ships, see page 172.) _Weehawken and Atlanta, June 17, 1863._ At early daylight the Confederate ram Atlanta was seen coming down the Wilmington River, and the Federal monitors Weehawken and Nahant steamed in to meet her. The Atlanta opened fire at 1500 yards, and a few moments afterwards grounded. The Weehawken approaching within 300 yards opened fire, and forced the surrender of the ram in fifteen minutes. Five shots were fired by the Weehawken, all striking and three penetrating the ram, killing and wounding many people at the guns. The ram was taken possession of and sent in as a prize. Action decisive. _Kearsarge and Alabama, June 19, 1864._ The Alabama steamed out of Cherbourg Harbor on the morning of the 19th to meet the Kearsarge in accordance with a challenge sent out two days before. The Kearsarge, steaming out clear of neutral water, turned when at a good distance and headed for the Alabama. The action commenced at 1200 yards, the Alabama sending the first broadside, which was immediately returned by the Kearsarge. The action continued for 65 minutes at a distance of 900 yards, the two ships steaming in a circle. At the end of this time the Alabama surrendered, and in about twenty minutes after sunk. Action decisive. _Fighting Powers of the Hatteras, Alabama, and Kearsarge._ -----------------+------------------------+------------------------- HATTERAS. | ALABAMA | KEARSARGE. -----------------+------------------------+------------------------- Battery. | Battery. | Battery. I 20-pdr. rifle.| I 100-pdr. rifle. | I 30-pdr. rifle. I 30-pdr. ” | I 68-pdr. ” | II 11-inch smooth-bores. IV 32-pdr. | IV 32-pdr. | IV 32-pdr. ” smooth-bores. | smooth-bores. | | | Battery Fought. | Battery Fought. | Battery Fought. II rifles, | II rifles, | I rifle, II 11-inch, II 32-pdrs. | III smooth-bores. | II 32-pdrs. | | Crew, 125 men. | Crew, about 170 men. | Crew, 163 men. -----------------+------------------------+------------------------- _Meteor and Bouvet, November 9, 1870._ On the morning of November 8th the French gun-boat Bouvet (5 guns) steamed out of Havana and beyond the neutral limit to wait for the Prussian gun-boat Meteor (3 guns) to come out in answer to a challenge. The Meteor, after waiting in port twenty-four hours as prescribed by law for the sailing of belligerent vessels, steamed out, and the action commenced about two miles outside of the neutral limit, the Bouvet firing the first gun. After a few manœuvres the Bouvet closed with the intention of ramming, and was partially avoided, striking a glancing blow abeam and slipping along, carrying away the Prussian’s main and mizzen masts, the rigging fouling the Meteor’s screw. In return, the Meteor put a shot through the Bouvet’s steam-chest, partially disabling her. The latter made sail at once and escaped into neutral water, the Meteor keeping up a fire but unable for a time to chase owing to the fouled screw. Action indecisive on account of the proximity of neutral water. Casualties: Bouvet, 3 wounded. Meteor, 3 killed; 1 wounded. Duration of action, less than one hour. RÉSUMÉ. Number of duels noted, 5. Decisive, 3. Indecisive, 2. Of the indecisive fights, one was due to lack of speed for overhauling the opponent and continuing the action; the other to the temporary disability of fouling the screw and the proximity of neutral water. In the decisive actions, two were decided by sinking, although in both cases the ship surrendered first. _Action off Point Tetas, October 8, 1879._ At daylight on the 8th the Chilian iron-clad corvette Blanco Encalada sighted the Peruvian iron-clad turret-ship Huascar, and gave chase. The Huascar, running to the northward, and slowly distancing the Blanco, was headed by the Chilian iron-clad corvette Almirante Cochrane. These two ships then engaged, and in about half an hour the Blanco closed and opened on the Huascar, placing her between two fires. After an action of one hour and a half the Huascar surrendered, having been much cut up, and having lost her three senior officers. Casualties: Blanco Encalada, none. Almirante Cochrane, 2 killed, 10 wounded. NOTE.—After careful research it has been found that in every case cited in which boilers were penetrated by projectiles, the part of the boiler hit was _above the water-line_. PART II. NAVAL ORDNANCE. AUSTRIA. A = Calibre. B = Over all. C = Rifled Bore. D = Powder Chamber. E = Number of Grooves. F = Twist of Rifling. G = Gun, including Breech-block. H = Breech-block. I = Preponderance. ---------------+-----+---------------+----+------+------------+----- NAME, NATURE, | | LENGTH. | | | WEIGHT. | AND | +---+-----+-----+ | +------+-----+ CLASSIFICATION.| A | B | C | D | E | F | G | H | I ---------------+-----+---+-----+-----+----+------+------+-----+----- | In.|In.| In. | In. | |Calib.| Lbs. | Lbs.| Lbs. Krupp Pattern Steel Breech-loaders. 28 cm |11 |240|170.7|36.41| 64 | 45 |60,500|2,266| 26 ” |10.24|225|148.4|46.06| 32 | 70 |48,400|1,947| 24 ” | 9.27|206|136 |41.7 | 32 | 70 |34,100|1,408| 24 ” | 9.27|185|115.3|41.7 | 32 | 64.7 |32,450|1,419| 21 ” | 8.24|165|105 |37 | 30 | 59 |19,400|1,078| Wahrendorff Breech-loader. 15 ” | 5.87|152|112.4|22.6 | 36 | 45 | 8,800| 321|248 Armstrong Muzzle-loaders.| 23 ” | 9 |156|104 |20.9 | 6 | 45 |27,900| |255 18 ” | 7 |130| 85.5|18.7 | 3 | 35 |14,500| |394 Cast-Iron Breech-loaders. 15 ” | 5.87|121| 89.8|16.9 | 30 | 63 | 6,300| 178|299 12 ” | 4.74|109| 84.4|12.4 | 24 | 52 | 3,300| 106|273 Bronze Breech-loaders. 9 ” | 3.43| 81| 57.5|16.5 | 24 | 45 | 1,070| 55|103 7 ” | 2.6 | 39| 23.8|11 | 18 | 30 | 196| 49| 48.4 AUSTRIAN ORDNANCE—(CONTINUED) A = Carriage. B = Slide. C = Height of Axis of Bore above Deck. D = Steel. E = Chilled. F = Common. ---------------+-------------+--------------------------------------- NAME, NATURE, | CARRIAGES. | PROJECTILES. AND +------+------+----+-----------------+---------------- CLASSIFICATION.| | | | Full Weight. |Bursting Charge. | | | +-----+-----+-----+----+----+------ | A | B | C | D | E | F | D | E | F ---------------+------+------+----+-----+-----+-----+----+----+------ | Lbs. | Lbs. | In.| Lbs.| Lbs.|Lbs. |Lbs.|Lbs.| Lbs. Krupp Pattern Steel Breech-loaders. 28 cm. |29,260|29,260| 53 |559 | 574 |473 |14.3|7.7 | 25.3 26 ” | 6,140|12,617| 46 |395 | |354 | 8.8| | 20.2 24 ” | 4,900| 9,845| 46 |292 | |263 | 6.6|3.7 | 14.9 24 ” | 5,814| 7,528| 45 |292 | 308 |263 | 6.6|3.7 | 14.9 21 ” | 6,194|10,412| 45 |206 | 196 |172 | 4.4|3.1 | 14.9 Wahrendorff Breech-loader. 15 ” | 1,878| 3,740| 39 | 84.7| | 69 | 2.1| | 5.1 Armstrong Muzzle-loaders. 23 ” | 4,188| 6,917| 44 | | 249 |257 | |5.9 | 18.5 18 ” | 2,956| 3,757| 45 | | 114 |118 | |1.1 | 7.9 Cast-iron Breech-loaders. 15 ” | 1,047| 1,207| 39 | | | 61 | | | 1.9 12 ” | 715| | 32 | | | 32 | | | 1.1 Bronze Breech-loaders. 9 ” | 836| | 38 | | | 14 | | | .4 7 ” | 294| | 21 | | | 6.4| | | .16 ---------------+------+------+----+-----+-----+-----+----+----+------ G = For Steel and Chilled Shot. H = For Common Shell. -------------------+--------------- NAME, NATURE, | POWDER CHARGE. AND +------+-------- CLASSIFICATION. | G | H -------------------+------+-------- | Lbs. | Lbs. Krupp Pattern Steel Breech-loaders. 28 cm. | 121 |121 26 ” | 70.4| 59.4 24 ” | 52.8| 44 24 ” | 52.8| 44 21 ” | 37.4| 30.8 Wahrendorff Breech-loader. 15 ” | 17.6| 14.3 Armstrong Muzzle-loaders. 23 ” | 50.6| 30.8 18 ” | 28.6| 13.2 Cast-iron Breech-loaders. 15 ” | | 4.7 12 ” | | 2.4 Bronze Breech-loaders. 9 ” | | .9 7 ” | | .35 -------------------+--------------- AUSTRIAN ORDNANCE—(CONTINUED) A = Ordinary. B = Saluting. C = Steel. D = Chilled. E = Common. ---------------+-------------+----------------------- NAME, NATURE, | POWDER | INITIAL VELOCITY. AND | CHARGE. | CLASSIFICATION.+------+------+-------+-------+------- | A | B | C | D | E ---------------+------+------+-------+-------+------- | Lbs. | Lbs. | Ft. | Ft. | Ft. | | | | | Krupp Pattern Steel Breech-loaders. 28 cm. | | | | 1,542 | 1,673 26 ” | 59.4 | 19.8 | 1,404 | | 1,378 24 ” | 44 | 15.4 | 1,420 | | 1,378 24 ” | 44 | 15.4 | 1,378 | 1,345 | 1,329 21 ” | 30.8 | 8.8 | 1,394 | 1,253 | 1,345 Wahrendorff Breech-loader. 15 ” | 14.3 | 4.7 | 1,608 | | 1,509 Armstrong Muzzle-loaders. 23 ” | 30.8 | 15.4 | | 1,411 | 1,000 18 ” | 13.2 | 8.8 | | 1,493 | 1,066 Cast-iron Breech-loaders. 15 ” | 4.7 | 4.7 | | | 1,017 12 ” | 2.4 | 2.4 | | | 1,000 Bronze Breech-loaders. 9 ” | .9 | .9 | | | 1,469 7 ” | .35| .35| | | 977 C = Steel. D = Chilled. E = Common. F = Penetrating Power. ---------------+-----------------------+------ NAME, NATURE, | WORKING EFFECT. | AND | | CLASSIFICATION.+-------+-------+-------+ | C | D | E | F ---------------+-------+-------+-------+------ | Foot | Foot | Foot | In. | Tons. | Tons. | Tons. | Krupp Pattern Steel Breech-loaders. 28 cm. | | 9,473 | | 14.8 26 ” | 5,404 | | 4,666 | 11.6 24 ” | 4,087 | | 3,464 | 10.6 24 ” | 3,838 | 3,223 | 3,867 | 10.25 21 ” | 2,781 | 2,198 | 2,153 | 9.3 Wahrendorff Breech-loader. 15 ” | 1,379 | | 1,060 | 7.8 Armstrong Muzzle-loaders. 23 ” | | 3,429 | 1,788 | 9.9 18 ” | | 1,766 | 928 | 8.1 Cast-iron Breech-loaders. 15 ” | | | 438 | 12 ” | | | 222 | Bronze Breech-loaders. 9 ” | | | 209 | 7 ” | | | 42 | The first type of rifled ordnance regularly introduced into the Austrian naval service was the old-type Armstrong muzzle-loader. In addition there are still found a few guns of present obsolete types which never passed the experimental stage. Within the past five years (1876) the Krupp breech-loader has been adopted as the standard pattern, and all guns of a higher calibre than 15-cm. are now of this type, although many complete Armstrong batteries are now found on board ship in the wooden fleet. The boat-guns are of the Krupp type breech-loaders, but are all manufactured of bronze, or what is generally known as Uchatius metal from its method of manufacture. _The Uchatius Construction._ The peculiarity of the Uchatius construction is the method of manipulating the bronze of which the gun is made, by which the metal is given all the advantageous qualities of steel. The body of the gun is cast in a chill mould, by which the cooling is so rapid that the mechanical mixture of tin and copper has no opportunity of separating and forming tin spots as is the case with ordinary bronze castings. After boring the gun, a succession of steel mandrels is driven through the bore, putting the whole casing in a condition of extreme tension on the exterior and compression on the interior, so that the different strata of metal are in proper condition for resisting tangential strains. ARGENTINE ORDNANCE. In the Argentine navy the heavy calibres (used on gun-boats of the Andes class) are Armstrong muzzle-loaders of the modified pattern (see page 195), the medium calibres are divided between old-type Armstrong muzzle-loaders and Krupp breech-loaders. The machine-guns used are Gatlings (see page 308). There is no regular gun factory in the country, the armament being entirely purchased abroad. BRAZILIAN ORDNANCE. The standard ordnance adopted in the Brazilian navy is the Whitworth (see page 218), both muzzle and breech-loaders. Machine-guns are of the Gatling type (see page 308). CHILIAN ORDNANCE. There is no standard ordnance in the Chilian navy, although the iron-clads are provided with Krupp guns, whilst the wooden fleet is armed with Armstrong muzzle-loaders. It is probable that the Krupp breech-loader will gradually supersede other types. The machine-guns are of the Gatling type. CHINESE ORDNANCE. The greater part of the rifled ordnance used in China is of the Armstrong muzzle-loading pattern. Some of their wooden vessels carry batteries of Krupp guns, and others Vavasseurs (see page 219). The Gatling machine-gun has been introduced into this service. DANISH ORDNANCE. There are three separate patterns of rifled ordnance found in the Danish navy. The favorite appears to be the Krupp breech-loader, whilst there are many guns of the Finspong pattern (see page 276, “Swedish Ordnance”). The Armstrong muzzle-loader has apparently the numerical superiority. ENGLISH ORDNANCE. A = Over all. B = Rifled Bore. C = Powder Chamber. D = Number of Grooves. ---------------------------+-------------------+---- NAME, NATURE, AND | LENGTH. | CLASSIFICATION. +-----+-------+-----+ | A | B | C | D ---------------------------+-----+-------+-----+---- | In. | In. | In. | 17-inch, 100-ton |392 | 308 | 55 | 27 ---------------------------+-----+-------+-----+---- Muzzle-loading, built-up Guns. Woolwich pattern. Armor-piercing. 16-inch, 80-ton |321 | 231.5 | 56.5| 12.5-in., 38-ton |230 | 170.5 | 27.5| 9 12-inch, 35-ton |195 | 135 | 27.5| 9 12-inch, 25-ton |182.5| 127 | 18 | 9 11-inch, 25-ton |180 | 119 | 26 | 9 10-inch, 18-ton |180 | 119 | 26.5| 7 9-inch, 12-ton |156 | 104 | 21 | 6 8-inch, 9-ton |144 | 99.5 | 18.5| 4 7-inch, 90-cwt |131 | 95.5 | 15.5| 3 7-inch, 6½-ton |133 | 95.5 | 15.5| 3 64-pdr., 64-cwt., shell |118 | 90 | 7.5| 3 ---------------------------+-----+-------+-----+---- Boat. 9-pdr., 8-cwt | 72 | 59.8 | 3.7| 3 9-pdr., 6-cwt | 61 | 49.3 | 3.7| 3 7 pdr., 200-lb., steel| 41 | 34 | 2 | 3 64-pdr., 71-cwt., converted|122.7| 96.27| 7 | 3 ---------------------------------+-------+-----+---- Breech-loaders. Armstrong pattern. Shell. 7-inch, 82 cwt. |126 | 83.5 | 16 | 76 40-pdr., 32-cwt. |126 | 92.87| 13.5| 56 40-pdr., 35-cwt. |127 | 92.87| 13.5| 56 20-pdr., 15-cwt. | 72 | 43.12| 11 | 44 20-pdr., 18-cwt. | 72 | 43.12| 11 | 44 Boat. 9-pdr., 6-cwt. | 68 | 45.5 | 7 | 38 6-pdr., 8-cwt. | 66 | 46 | 7 | 32 12-pdr., 8-cwt. | 78 | 52.87| 8.5| 38 ---------------------------+-----+-------+-----+---- E = Twist of Rifling. F = Weight of Guns. G = Preponderance. ---------------------------+-------+---------+-------- NAME, NATURE, AND | | | CLASSIFICATION. | | | | E | F | G ---------------------------+-------+---------+-------- | Calib.| Lbs. | Lbs. 17-inch, 100-ton | 0/40 | 229,000 | 8,960 ---------------------------+-------+---------+-------- Muzzle-loading, built-up Guns. Woolwich pattern. Armor-piercing. 16-inch, 80-ton | | 179,200 | 12.5-in., 38-ton | 0/35 | 85,120 | 12-inch, 35-ton | 0/35 | 78,400 | 120 12-inch, 25-ton | 100/50| 56,000 | 616 11-inch, 25-ton | 0/35 | 56,000 | 168 10-inch, 18-ton | 100/40| 40,300 | 952 9-inch, 12-ton | 0/45 | 26,900 | 560 8-inch, 9-ton | 0/40 | 20,100 | 448 7-inch, 90-cwt | 35 | 10,100 | 560 7-inch, 6½-ton | 35 | 14,500 | 336 64-pdr., 64-cwt., shell | 40 | 7,160 | 336 ---------------------------+-------+---------+-------- Boat. 9-pdr., 8-cwt | 30 | 896 | 7 9-pdr., 6-cwt | 30 | 672 | 29.5 7 pdr., 200-lb., steel| 20 | 200 | 5 64-pdr., 71-cwt., converted| 40 | 7,950 | 714 ---------------------------+-------+---------+--------- Breech-loaders. Armstrong pattern. Shell. 7-inch, 82 cwt. | 37 | 9,184 | 776 40-pdr., 32-cwt. | 36.5 | 3,584 | 607 40-pdr., 35-cwt. | 36.5 | 3,920 | 532 20-pdr., 15-cwt. | 38 | 1,680 | 108 20-pdr., 18-cwt. | 38 | 1,456 | 164 Boat. 9-pdr., 6-cwt. | 38 | 672 | 82 6-pdr., 8-cwt. | 30 | 886 | 55 12-pdr., 8-cwt. | 38 | 896 | 199 ---------------------------+-------+---------+-------- A = Carriages. B = Slide. C = Height of Axis of Bore above Deck. -------------------------------+------------------ NAME, NATURE, AND | CARRIAGES. CLASSIFICATION. +-------------+---- | Weight. | +------+------+ | A | B | C -------------------------------+------+------+---- | Lbs. | Lbs. | In. 17-inch, 100-ton | |Turret| Muzzle-loading, built-up Guns. Woolwich pattern. Armor-piercing. | | | 16-inch, 80-ton | |Turret| 12.5-in., 38-ton | |Turret| 12-inch, 35-ton |25,000|Turret| 45 -------------------------------+------+------+---- 12-inch, 25-ton |11,800|19,712| 60 |23,100|Turret| -------------------------------+------+------+---- 11-inch, 25-ton |21,120|Turret| 49 |10,700|18,500| -------------------------------+------+------+---- 10-inch, 18-ton |21,000|Turret| 49 | 8,940| 8,680| -------------------------------+------+------+---- 9-inch, 12-ton | 4,800| 7,400| 44 8-inch, 9-ton | 4,780| 6,710| 44 7-inch, 90-cwt. | 2,700| 3,900| 41 7-inch, 6½-ton | 3,500| 4,700| 41 64-pdr., 64-cwt., shell | 1,430| 2,600|41.5 Boat. 9-pdr., 8-cwt. | 532| 356|41.5 9-pdr., 6-cwt. | 532| 336| 7-pdr., 200-lb., steel | 112| 252| -------------------------------+------+------+---- 64-pdr., 71-cwt., converted | 1,600| 2,700| -------------------------------+------+------+---- Breech-loaders. Armstrong pattern. Shell. 7-inch, 82-cwt. | 1,760| 2,796|42.5 40-pdr., 32-cwt. | 1,595| 1,425| 42 40-pdr., 35-cwt. | 1,595| 1,425| 42 20-pdr., 15-cwt. | 616| 977| 29 20-pdr., 13-cwt. | 616| 977| 29 Boat. | | | 9-pdr., 6-cwt. | 298| 504| 6-pdr., 3-cwt. | 560| | 12-pdr., 8-cwt. | 364| 336| -------------------------------+------+------+---- D = Chilled. E = Common. F = Shrapnel. G = Burster for Chilled. H = Burster for Common. -------------------------------+--------------------------------- NAME, NATURE, AND | PROJECTILES. CLASSIFICATION. +---------------------+----------- | Entire Weight. | Weight. +-----+-------+-------+-----+----- | D | E | F | G | H -------------------------------+-----+-------+-------+-----+----- | Lbs.|Lbs. | Lbs. | Lbs.| Lbs. 17-inch, 100-ton |2,000| | |11.25| Muzzle-loading, built-up Guns. Woolwich pattern. Armor-piercing. 16-inch, 80-ton |1,700| | | 9.9 | 12.5-in., 38-ton | 800|843 | |14 |43 12-inch, 35-ton | 700|615 | 612 | 6.5 |40 12-inch, 25-ton | 600|497 | 497 | 6.9 |37.7 11-inch, 25-ton | 535|536 | | 5.5 |29.7 10-inch, 18-ton | 400|398 | 404 | 4.5 |20.25 9-inch, 12-ton | 250|250 | 255 | 2.5 |19 8-inch, 9-ton | 180|182 | 180 | 2.5 |14.5 7-inch, 90-cwt. | 115|117 | 116 | | 8.75 7-inch, 6½-ton | 115|117 | 116 | | 8.75 64-pdr., 64-cwt., shell | | 64 | 66 | | 7.2 Boat. 9-pdr., 8-cwt. | | 9 | 9.75 | | .5 9-pdr., 6-cwt. | | 9 | 9.75 | | .5 7-pdr., 200-lb., steel | | 7 | 7.5 | | .4 +-----+-------+-------+-----+----- | | | 66 | | 64-pdr., 71-cwt., converted | | 64 |Segment| | 7.2 | | | shell.| | -------------------------------+-----+-------+-------+-----+----- Breech-loaders. Armstrong pattern. Shell. 7-inch, 82-cwt. | | 90 | 102 | | 7.6 40-pdr., 32-cwt. | | 38 | 40 | | .25 40-pdr., 35-cwt. | | 38 | 40 | | .25 20-pdr., 15-cwt. | | 20.5 | 20 | | 1.2 20-pdr., 13-cwt. | | 20.5 | 20 | | 1.2 Boat. 9-pdr., 6-cwt. | | 9.5 | 8.5 | | .4 6-pdr., 3-cwt. | | 6 | 5.5 | | 12-pdr., 8-cwt. | | 11.25| 11 | | .5 -------------------------------+-----+-------+-------+-----+----- A = For Steel and Chilled Shot. B = For Common Shell. C = Ordinary Firing. D = Saluting. E = Chilled Shot. F = Common Shell. ---------------------------+-----------------------+----------------- NAME, NATURE, AND | POWDER CHARGE. |INITIAL VELOCITY. CLASSIFICATION. +----+-----+------+-----+-----+----------- | A | B | C | D | E | F | | | | | | ---------------------------+----+-----+------+-----+-----+----------- |Lbs.|Lbs. | Lbs. |Lbs. |Ft. | Ft. 17-inch, 100-ton |440 | | | |1,590| Muzzle-loading, built-up Guns. Woolwich pattern. Armor-piercing. | | | | | | 16-inch, 80-ton |370 | | | |1,520| 12.5-in., 83-ton |130 | | | |1,451| 12-inch, 35-ton |110 | | 85 | |1,300| 12-inch, 25-ton | 85 |67 | 55 | |1,180| 11-inch, 25-ton | 85 |70 | 60 | |1,315| 10-inch, 18-ton | 70 |60 | 44 | |1,364| 9-inch, 12-ton | 50 |43 | 30 |15 |1,420| 8-inch, 9-ton | 35 |30 | 20 |12 |1,413| 7-inch, 90-cwt | 30 |22 | 14 |10 |1,525| 7-inch, 6½-ton | 30 |22 | 14 |10 | | 1,250 64-pdr., 64-cwt | |10 | 10 | 6 | | 1,383 Boat. | | | | | | 9-pdr., 8-cwt. | | 1.75| 1.75| 1.5 | | 1,380 9-pdr., 6-cwt. | | 1.5 | 1.5 | 1 | | 1,390 7-pdr., 200-lb., steel| | .75 | .75| .25| | 968 64-pdr., 71-cwt., converted| | 8 | 8 | 6 | | 1,230 ---------------------------+----+-----+------+-----+-----+----------- Breech-loaders. Armstrong pattern. Shell. | | | | | | 7-inch, 82 cwt. | |11 | 11 | 7 | | 1,165 40-pdr., 32-cwt. | | 5 | 5 | 3 | | 1,180 40-pdr., 35-cwt. | | 5 | 5 | 3 | | 1,180 20-pdr., 15-cwt. | | 2.5 | 2.5 | 1.5 | | 1,000 20-pdr., 13-cwt. | | 2.5 | 2.5 | 1.5 | | 1,000 Boat. 9-pdr., 6-cwt. | | 1.1 | 1.1 | 1 | | 1,035 6-pdr., 3-cwt. | | .75| .75| .7 | | 1,046 12-pdr., 8-cwt. | | 1.5 | 1.5 | 1 | | 1,239 ---------------------------+----+-----+------+-----+-----+----------- ------------------------------+---------------+---------------- NAME, NATURE, AND | MUZZLE ENERGY.| PENETRATION. CLASSIFICATION. | | (IRON.) +-------+-------+-------+-------- |Chilled|Common |At 500 |At 1000 | Shot. | Shell.| Yards.| Yards. ------------------------------+-------+-------+-------+-------- | Foot | Foot | In. | In. | Tons. | Tons. | | | | | | 17-inch, 100-ton |37,700 | | | ------------------------------+-------+-------+-------+-------- Muzzle-loading, built-up Guns. Woolwich pattern. Armor piercing. 16-inch, 80-ton |27,213 | | 27.5 | 26.4 12.5-in., 38-ton |11,676 | | 18.7 | 17.7 12-inch, 35-ton | 8,200 | | 15.4 | 14.6 12-inch, 25-ton | 7,030 | | 13.9 | 13.1 11 inch, 25-ton | 6,415 | | 13.8 | 13.1 10-inch, 18-ton | 5,160 | | 12.7 | 12 9-inch, 12-ton | 3,496 | | 10.4 | 9.6 8-inch, 9-ton | 2,492 | | 9.8 | 9.5 +-------+-------+-------+-------- 7-inch, 90-cwt. | 1,855 | | 8.8 | 8.6 7-inch, 6½-ton | | 1,246 | 7.7 | 7.1 +-------+-------+-------+-------- 64-pdr., 64-cwt shell | | 848 | | ------------------------------+-------+-------+-------+-------- Boat. | | | | 9-pdr., 8-cwt. | | 528 | | 9-pdr., 6-cwt. | | 120 | | +-------+-------+-------+-------- 7-pdr., 200-lb., steel | | 45.5| | 64-pdr., 71-cwt., converted | | 670 | | ------------------------------+-------+-------+-------+-------- Breech-loaders. Armstrong pattern. | | | Steel. | | | | 7-inch, 82-cwt. | | 847 | | 40-pdr., 32-cwt. | | 378 | | 40-pdr., 35-cwt. | | 378 | | 20-pdr., 15-cwt. | | 142 | | 20-pdr., 13-cwt. | | 142 | | ------------------------------+-------+-------+-------+-------- Boat. | | | | 9-pdr., 6-cwt. | | 64 | | 6-pdr., 3-cwt. | | 45.6| | 12-pdr., 8-cwt. | | 117 | | ------------------------------+-------+-------+-------+-------- ----------------------------+------------------------------- NAME, NATURE, AND | REMARKS. CLASSIFICATION. | ----------------------------+------------------------------- 17-inch, 100-ton | ----------------------------+------------------------------- Muzzle-loading, built-up Guns. Woolwich pattern. Armor piercing. 16-inch, 80-ton | 12.5-in., 38-ton | 12-inch, 35-ton | 12-inch, 25-ton | Woolwich 11 inch, 25-ton | groove. 10-inch, 18-ton | Increasing 9-inch, 12-ton | twist. 8-inch, 9-ton | +------------------------------- 7-inch, 90-cwt. | Woolwich groove. 7-inch, 6½-ton | Uniform twist +------------------------------- 64-pdr., 64-cwt shell | Shunt groove. Uniform twist. ----------------------------+------------------------------- Boat. 9-pdr., 8-cwt. | Modern French groove. 9-pdr., 6-cwt. | Uniform twist. +------------------------------- 7-pdr., 200-lb., steel |French groove. Uniform twist. 64-pdr., 71-cwt., converted |Plain groove. Uniform twist. ----------------------------+------------------------------- Breech-loaders. Armstrong pattern. Steel. 7-inch, 82-cwt. +------------------------------- 40-pdr., 32-cwt. | 40-pdr., 35-cwt. | 20-pdr., 15-cwt. | Armstrong 20-pdr., 13-cwt. | multigroove. Boat. | Uniform 9-pdr., 6-cwt. | twist. 6-pdr., 3-cwt. | 12-pdr., 8-cwt. | ----------------------------+------------------------------- GUNS. The old cast and wrought iron smooth-bore guns are now obsolete, and only found in service at dock-yards for saluting and experiment, and forming the broadside batteries of some of the training ships. The rifled ordnance consists of the Woolwich muzzle-loader, the Palliser converted muzzle-loader, the Armstrong breech-loader, and the Gatling machine-gun. [Illustration: 7-inch Mark III.] The Woolwich type is subdivided into marks or patterns of each calibre corresponding to the gradual improvements in manufacture. Mark I. is in most cases the original Armstrong pattern, in which the jacket is composed of a large number of small coils or bands. In the other marks the number of the coils is decreased, whilst each one is increased in size. [Illustration: 10-inch Mark I.] The Palliser converted type is confined to the 64-pdr. calibre. The Armstrong breech-loader is no longer manufactured, but there are many guns of this type in service. These breech-loaders were originally of two types, known as the screw and the wedge gun. The latter was designed especially for naval use, but it has been entirely withdrawn from service, leaving only the screw type. It is not improbable that another type of breech-loaders will eventually find its way into service, having a breech-closing arrangement similar to the French type in principle. [Illustration: 64-pdr.] [Illustration: SECTION OF GROOVE FULL SIZE. French Groove.] [Illustration: French Modified Groove.] [Illustration: Woolwich Groove.] [Illustration: Plain Groove.] Various systems of grooves will be found in these guns, corresponding to different stages of development. In the 7-pdr. the French groove is used, having sharp angles, the loading side being at a sharper pitch than the driving. In the 9-pdrs. appears the modified French groove, in which the angles are rounded off and the loading side is at right angles to the driving side. In the 64-pdr. converted gun the plain groove is used. This groove is almost rectangular, the driving side being canted but little. In the 64-pdr. of 64 cwt. the shunt groove is used. This is a double groove, one half being deeper than the other, the rear end of the groove having a shunt by which the studs are turned into the shallow half. The 7-inch muzzle-loaders have the Woolwich groove with a uniform twist. This groove is the final modification of the original French groove. The higher calibres up to the 16-inch gun have the Woolwich groove with an increasing twist. The 16-inch calibre will have the plain multigroove, or the groove ordinarily used for expanding projectiles. The breech-loaders have the Armstrong multigroove, a groove which in section is not unlike a saw-tooth. _7-pdr. Steel R. M. L. 200 lbs._ Introduced into service in 1873. Made of a single block of steel, having no swell at the muzzle, but a small dispart patch into which the fore sight screws. Copper vent bouch. The sight is a plain, centre hind sight set at a permanent angle of deflection of 3°. It seats in a hole bored in the metal of the gun, having a simple clamp-screw to hold it in position. Two sight-bars are used with the gun, one graduated to 6° and the other to 12°, the graduations on both being for intervals of 3´. This gun may be distinguished from the 9-pdr. by the slope at the junction of the reinforce and chase, which is gradual. _9-pdr. Wrought Iron R. M. L. 6 and 8 cwt._ Introduced into service in 1871 and 1873. It consists of two parts—a toughened steel tube, and a jacket composed of two single coils and a trunnion-ring welded together. The cascabel is cut out of the solid end of the steel tube, and is recessed to receive the head of the elevating screw, which is fastened to it by a bolt and keep-pin. The 6 cwt. and 8 cwt. guns differ only in length and weight, the latter being 10½ inches longer. The 7-pdr. and the 9-pdr. are of the same calibre, but the same projectiles cannot be used in both, as the twist is different and the studs on the 7-pdr. projectile are much wider than those of the 9-pdr. The arrangement of the sights is the same for both guns. It is easily distinguished by the abrupt step at the forward end of the jacket. [Illustration: 9-pdr.] _64-pdr. Wrought Iron R. M. L. 64 cwt._ There are three marks or patterns of this gun. Mark I. was adopted in 1864 to replace the Armstrong wedge breech-loaders. It belongs to the Armstrong type of construction, and consists of a wrought-iron coiled A tube, a forged breech-piece, a trunnion-ring, several outer coiled tubes, and a muzzle-ring. The A tube being bored all the way through, the joints at the bottom of the bore were closed by means of a heavy copper gas-check. The calibre is 6.3 inches, in order to permit firing 32-pdr. round shot from it. The greater part of these guns have been retubed with a steel A tube. In these, the plain groove is found, whilst the iron-tubed ones have the shunt groove. This gun is easily recognizable by its raised trunnion-ring and also by the combination of the stepped breech with the muzzle-ring. Mark II. was adopted in 1866. It is made up of a coiled wrought-iron A tube, double at the chase, a forged breech-piece, a breech-coil composed of a double coil and trunnion-hoop welded together, a coil in front of the trunnions, and a cascabel block. The end of the bore of the A tube is reduced and forms a gomer chamber. These guns may be recognized either by the shunt rifling combined with the Woolwich form of gun or by the letter B marked on the left trunnion. Mark III. is made up of a solid-ended steel A tube, a breech-coil made up of a triple coil, trunnion-ring and coil in front of the trunnions welded together, and a forged cascabel block. These guns are similar in appearance to the 7-inch, but the sea-service guns of this mark have iron A tubes, and may be recognized by the shunt rifling. _64-pdr. R. M. L. 71 cwt. (Converted.)_ [Illustration: 64-pdr. Converted.] Adopted in 1864. This gun is the old cast-iron 8-inch gun, which is bored out and tubed on the Palliser plan. The tube is coiled and double at the rear, and, being through bored, the bottom joints are closed by a screw cup. After insertion the tube is held in place by a muzzle screw-collar and a pin tapped through the casing just forward of the trunnions. The gun is easily recognized from its old-fashioned shape. _7-inch R. M. L. 6½ tons and 90 cwt._ Adopted in 1865. There are three patterns of the 6½-ton guns, the first being of the old Armstrong construction, recognizable by its soda-water bottle shape. The other two marks are of the improved construction. The 90-cwt. gun was adopted in 1874 for use in the armament of unarmored vessels. It is similar to the Mark III. 6½-ton gun, except that it is lighter, the outside being turned down to get the required lightness. These guns are very similar in build and exterior appearance to the 64-pdr. _8-inch R. M. L. 9 Tons._ Introduced in 1866. There are three marks of this gun, similar to the 7-inch patterns. The only way in which the 8-inch can be distinguished from the 7-inch without measuring the diameter of the bore is by the fact of its having four grooves in place of three. _9-inch R. M. L. 12 Tons._ Introduced in 1865. There are five marks of this gun, the first one being of the old Armstrong construction, and the others of the Woolwich developments. The distinctive mark of this calibre is the grooving, there being six grooves. _10-inch R. M. L. 18 Tons._ Introduced in 1868. There are two patterns of this gun, both of the Woolwich design. The distinguishing marks are the nine grooves. _11-inch R. M. L. 25 Tons._ Introduced in 1867. There are two patterns of this calibre, both Woolwich. But few of them are used in the navy. This calibre cannot be distinguished from the 12-inch, except by measurement. _12-inch R. M. L. 25 Tons and 35 Tons._ The 25-ton gun was introduced in 1864. There are two patterns, the first built on the old Armstrong pattern, there being but four in service. The second mark is Woolwich. The 35-ton gun was introduced in 1871. There is but one mark of this gun corresponding to the Woolwich. [Illustration: 12-inch Mark I.] _12½-inch R. M. L. 38 Tons._ Introduced in 1875. There is but one mark of this calibre, and it exactly resembles the 35-ton 12-inch. _16-inch R. M. L. 80 Tons._ Introduced in 1878. There is but one mark of this calibre. These guns have a chamber one inch greater in diameter than the bore, and the form of rifling is that used with expanding projectiles, being multigroove with shallow grooves. The construction corresponds to the latest development of the Woolwich pattern. [Illustration: 16-inch.] _Armstrong Construction._ The first type of rifled guns introduced into the English naval service was the Armstrong, for both breech and muzzle loaders. Fabrication of original breech-loader ceased in 1864, but many of this type still remain in service. The original construction of the muzzle-loader was modified in 1864, but the general type and principles were preserved and are still used. The present type of modified Armstrong construction is used by many foreign services, and the 100-ton gun has been introduced in the English service. The modified Armstrong breech-loading system for the 100-ton gun has been adopted in Italy. The grooves of the breech-loader (original) are saw-toothed in shape, vanishing at the shot-chamber for use with a lead-coated projectile. [Illustration: Armstrong Groove for Breech-Loader.] [Illustration: Armstrong Shunt Groove for Muzzle-Loaders.] [Illustration: Armstrong 100-ton Gun (Improved Construction).] The grooves of the muzzle-loader (original) are of the shunt or double type, being cut to the full depth for the entire length and _one half the width_ of the groove. The other half of the width is cut on an incline from the muzzle towards the chamber, this half being the driving side. The loading edge of the groove near the bottom is cut at a sharp angle so as to throw the studs of the projectile against the driving edges of the groove, and give it a close bearing. In coming out the studs ride up the incline of the driving side and are pinched, centring the projectile. This groove is now obsolete. The groove of the improved muzzle and breech-loaders is the plain groove. BREECH-LOADING GUNS (ORIGINAL). _7-inch B. L. R. 82 cwt._ This calibre has been totally withdrawn from service, and has been replaced by the muzzle-loader. The body of the gun consists of an A tube, a breech-piece and B tube, a trunnion-ring and six coils. A vertical slot pierces the gun at the base of the chamber, into which fits a block called the vent-piece. This block is quite light and is easily lifted out or replaced by means of handles. The forward face of the block fits the rear of the chamber, and the escape of gas is prevented by means of a tin-cup gas-check. This vent-piece is held in position when in the gun by a block termed a breech-screw. This block is provided with a full screw-thread, and works longitudinally, the forward end of the block seating against the back of the vent-piece. This breech-screw is provided with a handle for turning, the handle being weighted at the end, and having a lost-motion movement by which the block may be driven close home when screwed up. The vent is bored in the vent-piece, piercing it vertically to the centre, and then turning at right angles. The breech-screw is hollow, the hole being of slightly less diameter than the powder-chamber. When the vent-piece is out, the gun is cleaned and loaded through the breech-screw. [Illustration: Armstrong Breech-Loader.] [Illustration: Vent-Piece.] [Illustration: Breech-Screw.] _40-pdr. B. L. R. 32 and 35 cwt._ The same general type as the larger calibre. In this and smaller calibres there is no separate gas-check, the joint consisting of two bevelled copper facings, one on the vent-piece and the other in the powder-chamber, which form a close contact and seal the joint by expansion. _20-pdr. B. L. R., 15 and 13 cwt.; 12-pdr. B. L. R., 8 cwt.; 9-pdr. B. L. R., 6 cwt.; 6-pdr. B. L. R., 3 cwt._ Same construction as the 40-pdr., except that the coils are fewer. _Modified Breech-Loaders._ Although these guns are not yet introduced into service, they probably will be. The construction is the same in principle for the body of the gun as in the old breech-loaders, with slight modifications. The breech mechanism is almost identical with the French, the modifications being in the gas-check, which is of the general Broadwell type. MUZZLE-LOADERS (ORIGINAL). [Illustration: Armstrong 10-inch Muzzle-Loader (Original Construction).] These guns consist of a steel solid-ended tube, reinforced by a number of coils connected by hook-joints. The coils are of wrought-iron bars, rolled into hollow cylinders and the turns welded in order to give a circumferential direction to the grain. Over the breech and powder-chamber a forged breech-piece fits, the grain of the iron running longitudinally. The base of the A tube is supported by a solid wrought-iron piece screwing into the forged breech-piece. A narrow spiral gutter is cut around the A tube throughout its length, and carried out at the cascabel screw-thread. By means of this, in case that the steel tube gets cracked through, the leakage of gas gives warning by blowing out at the breech. Some of these guns (7-inch) have the shunt groove, and the later ones the Woolwich groove. _Modified._ The modified construction consists in abolishing the forged breech-piece, giving the steel tube a greater thickness over the powder-chamber, and decreasing the number of coils, whilst their thickness is increased individually. The guns are also given a greatly increased length of bore, and the powder-chamber is enlarged in diameter to permit the insertion of a heavier charge. Plain grooves. At present the Elswick Company is engaged in supplying the Italian Government with breech-loading 100-ton guns. The breech-block is of the French type, and arrangements are made for moving the block as well as loading by hydraulic or steam power. The 100-ton gun has no carriage proper, its trunnions resting in heavy blocks on the fixed slide, being connected in rear with hydraulic recoil pistons which are themselves connected in such a manner as to equalize the strain of recoil. The movements of running out and in and loading are all performed by hydraulic power. The vent of the 100-ton gun is axial both in the breech and muzzle loader. _Armstrong Projectiles_ (see page 209). _Armstrong Fuze_ (see page 211). _Armstrong Breech Mechanism and Rotating Belt._ [Illustration] [Illustration] The points of peculiarity of the Armstrong breech mechanism are: 1st. The face of the breech-block is made slightly convex so that the gas-check springs back when the pressure comes on it, throwing the edge outwards, and making a wedged joint. This comes free again the moment that the block is started. 2d. The rear of the shaft holding the gas-check in place is held by a spiral spring, so that in turning the block to lock it the gas-check is not revolved in its seat. CARRIAGES. Naval gun carriages and slides, as a rule, are built of plate-iron, although many of the wooden ones are still retained in service for the lighter calibres. The lighter carriages are worked by tackles, and the heavy ones by gearing. Breechings are no longer used with slide carriages, the recoil being checked by friction compressors or hydraulic recoil cylinders and buffers. Wooden carriages are furnished for all smooth-bores and breech-loading rifles, and for 64-pdr. muzzle-loaders. Iron carriages may be furnished for these guns, but wooden ones are never furnished for others. The wooden standing carriage is the old-fashioned four-truck one. The wooden rear-chock carriage is similar to what is known elsewhere as the Marsilly. Breechings are rove through holes in these carriages, and are not attached to the guns. The wooden slide-carriages and their slides are of the ordinary old-fashioned type. The compressor for these carriages consists on each bracket of the carriage of two iron plates with hinged pieces on their lower ends. They are suspended on iron bolts passing through the bracket so that their lower ends hang down and overlap the side of the slide. Through the upper ends of the plates and the bracket an iron screw and lever passes, whose motion separates or approaches the pieces, allowing them to release or grip the slide. Some slide-carriages are provided with hydraulic recoil cylinders. _Iron Field-Carriage._ This carriage consists of two ¼-inch plate-iron brackets recessed to receive the axle-tree. These plates are strengthened by angle-irons riveted along the upper edge on the outer side from the trunnion-holes to the point. The brackets are lightened as much as possible by having pieces cut out of them. A front transom of plate-iron, having angle-irons riveted to it each side to connect it with the brackets; a similar transom about half way down the brackets; an iron trail-plate and axle-tree, and wooden wheels. The carriage makes a load for a mule, and the wheels another load. The elevating-gear consists of an iron stool-bed formed in front to hook loosely over a cross-bar, while the rear end, provided with two small studs, rests in racks riveted to the brackets. This is for getting rapid elevations. For fine sighting a sliding quoin is fitted to the stool-bed by clips, and is worked by a hand-wheel. Check-ropes are applied to the trail-eye and lashed to the wheels in firing. The Gatling gun is provided with a curved ratchet projecting down from the bottom of the gun-case, giving elevations by means of a hand-wheel and pinion. [Illustration: 7-pdr. Field-Carriage.] _Iron Boat-Carriage._ [Illustration: 9-pdr. Boat-Carriage.] The boat-carriage is made up of two ⅝-inch plate brackets, having narrow stiffening pieces along the front and upper edges. The brackets are riveted to a bottom plate by angle-irons on the outer sides, and are connected in front by a transom of plate riveted to angle-irons, and in rear by another transom. It has two outside holding-down clips on each side. The elevating-screw admits of 10° elevation and 2° depression. The slide consists of two sides of girder-iron, 6½ inches deep, and are joined by a connecting plate, three bottom plates, and a rear transom. These bottom plates have metal friction-plates attached beneath them. The centre as well as the front is fitted with a pivot-bolt. The transporting axle bolts beneath the slide. The hydraulic buffer lies upon the centre and rear transoms, to each of which it is secured by a band. This buffer is nothing more than the ordinary type of long cylinder and piston.[3] The cylinder is nearly filled with oil through a hole in the upper rear part. In case it is desired to empty the cylinder, there is a hole for the purpose in the lower forward end. Holes of a certain diameter are bored through the piston, and the recoil is checked in proportion to the resistance of the oil in passing through these holes. The cylinder not being quite full leaves an air-cushion to ease the strain. The piston-rod is secured to the carriage, and a slight vertical play is allowed in its fastenings to prevent the jump of the gun from bending it. [3] See cut, page 203. _Carriage for Light Upper-Deck Guns._ [Illustration: Slide for Light Upper-Deck Guns.] The carriage consists of two ½-inch plate brackets connected by a bottom plate and transom. This carriage has no rollers. It is fitted with the elevating hand-wheel, pinion, and ratchet in use with the heavier calibre.[4] The toothed ratchet bolts to the side of the breech of the gun. The toothed edge of the ratchet gears to a pinion, while the back is supported by a friction-roller attached to the bracket. The pinion being inside the bracket connects with a hand-wheel on the outside, which is held by a friction-brake. The peculiarity of the slide is that it slopes to the front at an angle of 10°. It is provided with a hydraulic recoil buffer (see Boat-Carriage), and also with plate compressors. There are two rubber buffers at the front of the slide to catch the gun in running out, and an in-tackle is fitted underneath the slide. A pivot-flap projects from the front of the slide, the pivot-bolt being close to the gun-port. [4] See cut, page 199. _Carriage and Slide for 7-inch M. L. R._ [Illustration: 7-inch Carriage.] The carriage is a single-plate one, having two brackets, two transoms, and a bottom plate assembled by angle-irons. The bottom plate is slotted for the Elswick compressor.[5] This compressor is a modification of the American 15-inch one. It is made up of six bars of plate-iron, all of which are movable and which are placed lengthwise in the slide like the wooden balks in the American type. Seven plates hang through the slot in the bottom plate of the carriage, being loosely secured to it. The plates and bars are pressed together by rocking levers worked by screw-shafts, the shafts being worked by levers. The screws on the shafts are of different pitch. That on the right is called the compressing, having a quick pitch; when it is moved it presses the plates against the other lever, which, having a finer-pitched screw, is called the adjusting. The lower end of the adjusting lever is prolonged to form a trip-stop so that the recoil of the gun will throw the lever down automatically. [5] See cut, page 201. [Illustration: 7-inch Slide.] The front rollers of the carriage are permanently in action, whilst the rear ones are on eccentrics. The elevating-gear is the wheel and ratchet. The slide has a slope to the front of 3°. The slide-rollers are on eccentric axles. Attached to the rear of the slide is a simple system of winch-gear for running in and training. This is nothing more than a spur-wheel and windlass revolved by a pinion and crank. In using it, the fall of the in-tackle or training-tackle is caught over the windlass which is turned by the crank. In revolving slides, or slides which shift from one port to another, there is a separate attachment under the forward end, which is nothing more than a centre roller which when thrown into action raises the forward rollers clear of the deck; the after-end of the slide being held by a pivot-bolt, the forward one is swung to a new pivot-centre. This centre roller is thrown into action by gearing. Two ordinary bollard-heads are attached to the rear of the slide, so that the carriage may be held back or veered out in a seaway by turns of the in-tackle falls about them. _Carriage and Slide for 8-inch M. L. R._ [Illustration: 8-inch Slide.] The carriage is similar to the 7-inch, except that instead of being fitted for tackles it is provided with Scott’s nipping-gear and endless chain.[6] The chain is a slide attachment. The nipping-gear consists of a heavy iron stirrup, movable in a vertical direction by means of an eccentric and lever. The chain passes freely through this stirrup when it is down, but on throwing it up the links of the chain are caught in the teeth of a sprocket-plate fastened to the bed-plate of the carriage, so that the movement of the chain carries the carriage with it. The slide is similar to the 7-inch, except that the Scott chain and gearing is used, which also traverses the slide. There are two chains, one at each side of the slide, which are revolved by pinions at either end. At the rear end the pinions are on a heavy axle, which is revolved by a crank and gearing. For training, this gearing is connected to a short shaft, having a pinion at its forward end, which gears in a metal rack on the deck; this shaft may be revolved or fixed at will by means of a pawl-wheel and screw-break, so that in training the slide can be traversed or fixed as desired. When the slide is a shifting one, the same gearing is used to swing the forward end of it around, by means of another pinion which is shipped just in front of the forward end of the slide. The compressor is the Elswick pattern. [6] See cut, page 202. [Illustration: Elswick Compressor.] _Carriage and Slide for 9-inch M. L. R._ The broadside 9-inch carriage is the same as the 8-inch; that for ships of the Sultan class differs in several particulars. The carriage is very low, its bottom plate coming well down inside of the slide. It is a double-plate carriage built on a cast-iron frame, the outer plate coming to the top of the slide, whilst the inner one is carried down inside. The rollers are completely hidden in their recesses, the forward ones being permanently in action, whilst the rear ones are on eccentrics. The rear axle between the rollers is bent down so as to give room for the breech of the gun in elevating. [Illustration: 9-inch Elevating-Gear.] The compressor fitted to this carriage is called the bow-compressor. It consists, on each side, of a bow or cramp pivoted at the centre, so that one arm projects inside the carriage through the bracket. A hinged plate is secured to the inner end, while the outer one holds an adjusting-screw which is worked by a hand-wheel, the latter having a pawl to hold it in any desired position. A brass arc near the face of this wheel graduated up to 17° shows the amount of compression. Two projecting pieces are attached to the side of the carriage to support the compressor-plates which hang upon them. These plates are three in number, the two inner ones being tapered, whilst the outer one is square-faced and much heavier. When the carriage is mounted on the slide, these tapering plates lie between the outer side of the slide (the T of which is filled out with wood) and two compressor-bars, which are tapered to correspond with the plates. The adjusting-screw takes against the outer plate, and by turning it the plates and bars are jammed together. The advantage of this compressor is that when once set it is self-acting, going out of action when the carriage is raised on its rear rollers, and coming into action by the weight of gun and carriage when the rollers are down. [Illustration: Bow-Compressor.] [Illustration: Scott Nipping-Gear.] The Scott nipping-gear is used, but it is single, the chain traversing the middle of the slide. The slide has no peculiarities except its height, which is greater than that of the 8-inch. _Carriage and Slide for 10-inch M. L. R._ The carriages for ships of the Sultan class are the same as those for the 9-inch, except that the rear rollers are thrown in action by means of a hydraulic jack attached to the left bracket, there being a capstan-head arrangement at the other end of the axle for use in case the jack should break down. (For turret-carriage, see turret-carriage of 11-inch.) The slide is similar to that of the 9-inch, except that instead of the bow-compressor two hydraulic recoil cylinders are used, one at each side of the slide. [Illustration: Hydraulic Recoil Compressor.] _Carriage and Slide for 11-inch M. L. R._ [Illustration: 11-inch Small-Port Carriage.] The carriages for ships of the Temeraire or Hotspur class are the same as the 9-inch ones. The turret-carriage is of the muzzle-pivoting type. This carriage presents the peculiarity of having one bracket larger than the other, in order to allow for the circular shape of the turret. The general frame of the carriage is similar in shape to the ordinary type, being double plate on a cast-iron frame, with an interior wrought-iron frame which serves as a guide for the saddle. The gun is supported by the trunnions in a saddle which is nothing more than a massive fork, the leg of which is a hydraulic piston-rod. The arms, containing the trunnion-holes, are supported in the framework of the brackets. The hydraulic cylinder projects through and is secured to the bottom plate of the carriage, and the double-acting pump-brake is attached to a spindle passing through the bracket. The gun does not rest permanently on the hydraulic, but when at the middle or top of its elevation the saddle-arms are supported by iron blocks, which are put in place through slits in the brackets. When the gun is down the saddle rests on the bottom of its slots. At the low level the gun gets 13° elevation, and at the high level 6° depression. The rear rollers are thrown in action by means of a double-acting hydraulic. The elevating-gear for this gun is different from that of the smaller calibres. Instead of having a curved ratchet attached to the gun, the ratchet in this case is pivoted to the carriage, and a gearing and traveller being clamped to the cascabel of the gun, the breech elevates or depresses up and down the stationary ratchet. This carriage is provided with Scott’s nipping-gear and the bow-compressor, the latter being heavier and double, working on both sides of the slide-plates. These carriages are provided with breechings which pass around a fitting bolted to the inside of the front transom. Additional hydraulic jacks are placed underneath the arms of the saddle for use in case the central one gives out. The slide is similar to the 10-inch, where traversing slides are used. In turrets the slide is a fixture. (See 12-inch slide.) _Carriage and Slide for 12-inch and 12½-inch M. L. R._ The carriage for turrets of the Devastation class is similar in general to that of the 11-inch. The hydraulic lift for the saddle is not a part of the carriage, however, but a part of the ship, there being two rams, one for raising the gun when run out, and one for raising it when run in. The elevating-gear is also different, in having an arrangement for altering the height of the stationary ratchet to correspond with the different levels of the trunnions. The slide is provided with hydraulic recoil cylinders, which also act as the running in and out power. The piston-head has no holes bored in it, but when the gun recoils the oil is driven out of the cylinder, the flow being regulated by a balanced valve. The pump to move the hydraulic is worked by steam, the direction of the movement being controlled by a lever in the turret. _Carriage and Slide for 16-inch M. L. R._ There is no carriage proper for the 16-inch gun, the trunnions resting in saddles on beams fixed in the turret. Hydraulic piston-rods are attached to each saddle, the two cylinders being connected by a pipe to equalize the strain. The breech of the gun rests on a third block which travels in guides. These guides are hinged at the rear, the forward ends resting by means of a cross-head on the piston of a vertical hydraulic cylinder. By means of this the gun is elevated or depressed. The gun is run in or out, elevated, and loaded by hydraulic power. _Loading Arrangements._ [Illustration: 81-ton Gun-Slide and Trunnion Saddles—Hydraulic Loading Arrangements.] With the lighter calibres and broadside guns the usual loading methods are used, the heavy charges and projectiles being transported by means of railways either on deck or under the beams (the projectile in the latter case being slung to a traveller), and raised to the muzzle of the gun by a small davit shipped at the proper point on the slide. With the heavy turret-guns, automatic loading is resorted to. To accomplish this, a hole the size of the bore of the gun is worked in the turret underneath the port. Athwartship openings are left in the turret casing of the main-deck, in front of which are placed a hydraulic lift and the hydraulic extension rammer. The gun being run in, the turret is revoved until the port comes over the station of the rammer. The muzzle is then depressed, and the gun started out until it rests at the loading-hole. The rammer, which is also the sponge, being fixed permanently at the proper angle, is started ahead by a lever and is pushed to the bottom of the bore. On bringing up, a small spring at one side of the rammer-head is pressed, which opens a valve and turns on a stream of water. The rammer being withdrawn, the charge is run up in a hand-car on to the hydraulic lift, by which it is raised to the muzzle. A wad is shipped on the head of the rammer, and the latter, being started ahead, pushes the charge home. Owing to the shape of the rammer-head, the valve-spring cannot be pressed in pushing the charge down, so there is no danger of turning on the water. The position of the rammer-head in the bore is denoted by a simple pointer worked by a string, the other end being attached to the rammer-head. This crude arrangement is frequently out of order, and but little attention was paid to it until its importance was brought forcibly into notice by the double loading and consequent explosion of one of the Thunderer’s guns. One drawback to this system of loading is the care necessary to put the projectile on its car in one exact position, in order that the studs may come opposite their grooves. The car itself must be built at a certain fixed angle to bring the charge exactly in line for loading. [Illustration: Hydraulic Recoil Press.] GUNPOWDER. Gunpowder is graduated, according to size of grain and type, into seven distinct classes. _Service Pistol Powder_ is used for Colts’ and Adams’ pistols and for the bursting charges of shrapnel. It passes through a 44 and rests on a 72 mesh sieve. _Service R. F. G. Powder_ is used for rifled small-arms, except the Martini-Henry, Gatling guns, and pistols. It passes through a 12 and rests on a 20 mesh sieve. Density, 1.6. _Service R. F. G.² Powder_ is used for Martini-Henry rifles and Gatling guns. It is of the same size as the R. F. G., but greater density—1.72. _L. G. Powder_ is used in smooth-bores, and in rifled guns below 7 inches. This powder is being withdrawn as of inferior quality. _R. L. G. Powder_ is used for full charges in guns of 7 inches and upward where the weight of charge does not exceed forty pounds. It passes through the 4 and rests on the 8 mesh sieve. _P. Powder_ is used for battering-charges of all rifled guns of 7 inches and above, up to 12½ inches, and for all service charges of forty pounds and upward. The grain is cubical, ⅝ of an inch on a side. _P.² Powder_ is used with the 12½-inch and upward. This powder is cubical, 1½ inches on a side. Gunpowder is graduated according to its fitness for use into six classes: Class I. _Service._—All new powder. All returned powder found to be uninjured. Class II. _Blank._—Powder from broken-up cannon-charges too dusty for Class I. Powder from broken-up small-arm ammunition. Service powder found too dusty for use in cartridges. Class III. _Shell._—Powder found too dusty for Class II. Class IV. _Doubtful._—All powder returned into store and waiting examination. Class V. _Condemned for Sale._—Powder too much deteriorated for the higher classes. Class VI. _Condemned for Extraction._—Powder obtained from shells, and powder found to have been too much damaged for any use except for the extraction of the saltpetre. CARTRIDGES. Cartridge-bags are made either of serge or of silk cloth. Serge is used in all smooth-bores and breech-loading rifles, except for the blank cartridges of smooth-bores, which are of silk. Silk is used for all muzzle-loading rifles. Cartridges are always filled by weight and not by measure. All cartridges are both choked and hooped, the number of hoops depending on the length of the cartridge. These hoops are either of twine or braid, according to the size and weight of cartridge and the stiffness required. All cartridges are marked in black with the nature of the gun for which they are intended, the weight of powder, and the monogram of the station where they were filled. Cartridges are packed in magazines, in corrugated brass tanks which are either rectangular or pentagonal. Cartridges for calibres above 8 inches are not transported about the ship’s decks in passing-boxes, but in zinc cylinders with a lock cover. PROJECTILES. The projectiles used are shot, shell, shrapnel, and case-shot. [Illustration: Woolwich Shrapnel.] [Illustration: Woolwich Common Shell.] [Illustration: Woolwich Case-Shot.] [Illustration: Woolwich Double Shell.] The Palliser chilled shot is used with the muzzle-loading guns of 7 inches and upward. It is of cast-iron, the head as far as the shoulder being cast in a chill, while the rest is in a sand-mould. This shot is never solid, but a space is left large enough to contain a bursting-charge if desirable. By this means a better casting is obtained. With the larger calibres, the cylindrical part of the shot is reduced slightly in diameter to allow for setting up when the projectile first starts. There are four kinds of shells: the segment, common, double, and Palliser. The segment shells are only used with breech-loaders. This shell consists of a thin cast-iron cylindro-conoidal case lined with cast-iron segments built up in layers and leaving a cylindrical powder-chamber in the centre. The base is closed by a cast-iron disc. It is provided with a thin jacket of alloy, which takes in the rifling and gives the twist to the projectile. The common shell is the ordinary cast-iron projectile. In addition to its fuse-hole it is provided with a loading-hole opening on the shoulder. The double shell is similar to the common shell, except that it is nearly four calibres long and its chamber is provided with longitudinal strengthening ribs. It is only used in the 7-inch gun. [Illustration: Zinc Passing-Box.] [Illustration: Armstrong Segment Shell.] [Illustration: Armstrong Shrapnel.] [Illustration: Woolwich Cartridge.] The Palliser shell is similar to the Palliser shot, except that it is slightly longer and has a larger chamber. Fuses are never used with the Palliser shot or shell. The shrapnel consists of two main parts—the cast-iron body and the wooden head. The body is nearly as thick as that of the common shell, and is scored longitudinally in order to permit it to break up easily. The wooden head is covered with a light sheet-iron case which rivets to the body. The bottom of the chamber is the powder-chamber proper, over the mouth of which rests a wrought-iron disc having a hole in the centre, tapped to take a wrought-iron tube. The upper chamber is filled with lead bullets which are set fast with resin. The fuse screws into a hole in the head, and projects into the wrought-iron tube communicating with the powder-chamber. Both the chamber and the tube are filled with powder. Case-shot are of the ordinary form. Up to the 7-inch calibre the body is made of tin, beyond that it is of tinned sheet-iron. For the smaller calibres the bottom is of tin, for the larger it is a wrought-iron disc. The top is in all cases tinned iron. The contents of the case are packed in clay and sand, and there is an interior lining made up of three loose-fitting wrought-iron segments. Shot and shell used with muzzle-loading rifles are now provided with a copper disc attached to the base, called a gas-check. This disc is slightly convex to the rear to enable it to spread and stop the windage on firing. It is attached to the projectile by means of a screw-plug and nut. On firing, it is expanded into the rifling and completely stops the windage. It gains a grip on the base of the shell by means of an undercut rim, whilst radial scores on the base prevent it from gaining an independent rotary motion, and enable it to assist in rotating the projectile. [Illustration: Palliser Shot.] [Illustration: Papier-maché Wad.] [Illustration: Brass Gas-Check for Projectiles.] All muzzle-loading projectiles are provided with studs for rotation. They are of gun-metal, swedged into countersunk holes, in two rows. The loading side of all grooves is cut back so as to double the width of the groove at the muzzle, in order to facilitate the insertion of the projectile. Papier-maché wads are used in front of the heavier projectiles to keep them from slipping forward out of place. These wads are very slightly less than the calibre of the gun, and about an inch in thickness. A hole is bored through the centre, large enough to leave a clear space for the fuse. A short papier-maché tube projects from the forward side of the wad, which serves to attach it to the rammer when loading, and hold it vertical while the charge is going home. Shell-charges for Palliser projectiles are introduced in serge bags to prevent premature explosions. FUSES. Both time and percussion fuses are used in the navy. The time-fuses are the Boxer and the Armstrong; the latter used only with breech-loading segment shell. The percussion fuse is the Pettman. The Boxer time-fuse has a beech-wood body and is conical in shape. The fuse composition is a vertical column in a centre channel which is not bored entirely through the bottom, a base being left to receive the set-back of the column on firing. Two side channels are bored from the bottom nearly to the top, and are filled with mealed powder. Holes are bored from the outside into these channels one tenth of an inch apart, and the composition burns at the rate of one inch in five seconds, so that each hole represents a half-second. The head of the fuse is closed by a safety-cap, which is removed before loading. The time of burning is set by boring through the desired hole into the composition. The bottom hole is always bored through. [Illustration: Boxer Time-Fuse.] [Illustration: Armstrong Time-Fuse.] [Illustration: Armstrong Percussion Fuse.] The Armstrong time-fuse is made of gun-metal. A ring of fuse composition similar to that of the old Bormann fuse is pressed in a channel whose outer wall is marked in inches and tenths. This fuse composition is covered by a movable collar which is kept in place by a nut. Attached to this movable collar is a small chamber containing a detonator. When the gun is fired, this detonator ignites the composition at the point at which it is set, and the flame travels around until it meets the magazine, or blowing-chamber, which communicates the flame to the shell-charge. The Pettman percussion fuse is made up of seven principal parts—the body, top plug, steady plug, detonating ball, cone plug, lead cap, and bottom plug. The top and bottom plugs are set fast; the shock of firing sets back all the other parts, crushing the lead cap over the cone and bottom plugs, which by their shape are all held fast when jammed together. The detonating ball, whose surface is covered with a detonating composition, is carried straight back and prevented from coming in contact with the sides of the chamber by the steady plug. When the projectile strikes, however, the steady plug starts forward and releases the ball, which, coming in contact with the sides of the fuse, explodes the detonating powder and the flame is carried by holes through the lower plugs to the charge. [Illustration: Pettman Percussion Fuse.] [Illustration: Laboratory Percussion Fuse.] PRIMERS. [Illustration: Electrical Primer.] [Illustration: Quill Friction Primer.] Gun-locks are no longer used in the navy. Guns are fired by means of either the friction or the electric tube. The quill friction-tube is used exclusively for the navy. This tube is of two sizes, the short and the long, the latter being used with the heavy calibres. The quill is driven with mealed powder, and a hole is pierced through the centre. The top and bottom are stopped with shellac putty. In the upper part of the tube an iron-wire friction-bar is inserted, having a sprinkling of detonating composition and mealed powder on one side. The top of the tube is strengthened by a thread woolding and a leather loop, which slip over a pin placed forward of the vent. The naval electric tube consists of a quill body and a xylonite bottom, the quill being of a diameter to slip completely into the vent. Within this quill are insulated terminals of wire connected by a platinum-silver wire bridge surrounded by priming composition. The whole tube goes into the vent, a stop on the insulating wires preventing it from going too far. [Illustration: Centre Hind-Sight—Muzzle-Loaders.] [Illustration: Wood Scale.] SIGHTS. [Illustration: Sliding Leaf Tangent Sight—Muzzle-Loaders.] All muzzle-loading guns, except turret-guns and boat-guns, have six sights—three hind-sights (two tangent and one centre) and three trunnion-sights. Boat-guns have one centre hind and one fore sight, and turret-guns have turret-sights. All guns except boat-guns have wood scales, and all guns in covered batteries, except turret-guns, have graduated arcs on the pivot-circles. [Illustration: Barrel-Head Tangent-Sight—Breech-Loaders.] [Illustration: (Screw.)] [Illustration: (Drop.) Fore-Sight.] [Illustration: Sliding-Leaf Tangent-Sight—Breech-Loaders.] The tangent-sight is a rectangular steel bar rounded off on two sides, and having a gun-metal head in which slides a gun-metal leaf. The gun-metal leaf slides in a socket, and is provided with a simple clamp-screw. These sights are graduated on the four sides. In general, the forward side is graduated to 10´ from 0 up to 12°. The right side is marked from 100 up to 4000 yards, and for seconds of fuse from 1 to 30—both graduations for common shell with the full charge; the rear side from 100 to 4800 yards for Palliser shot or shell with the battering-charge; the left side from 100 to 4800 yards, and from 1 second to 34 seconds, for common shell with battering-charge. The centre hind-sight is a hexagonal gun-metal bar with the sliding leaf marked like the tangent-sights, but shorter. All hind-sights are set at a permanent angle of deflection. The fore or trunnion sights consist of a pillar and collar of gun-metal, a small steel leaf, and a screw for fixing the leaf. A gun-metal socket is fixed in the gun, and the sight secured in this socket by a double bayonet-joint, so that it may be readily removed or replaced without requiring a special adjustment. With turret-guns the sights are placed on top of the turret. Each turret is provided with a number of man-holes large enough to admit the head and shoulders. For each man-hole a pair of sights is adjusted, the line of sight being parallel to the axis of the gun. In some turrets, in order to prevent exposure, mirrors are arranged so that these sights may be used by persons in the turret. The wood scale is a wooden bar used in connection with marks on the rear face of the cascabel. This face is marked from 0 to 3½° for both elevation and depression. The wood scale is a square bar having its four sides marked to yards for different charges. When the gun is placed in position aboard ship, this scale is cut so that its zero and the cascabel zero shall coincide with the guns at level, on an even keel. The sights for breech-loaders are similar to those of muzzle-loaders, except that what is known as the barrel-headed sliding leaf is used, and there are no centre-sights. DISTINGUISHING MARKS OF PROJECTILES. The common shell is known from its carrying a fuse in the point which is cut off for that purpose. The double shell is known by its disproportion of length to diameter. The Palliser projectile is known from its sharp point. The shrapnel is known from the joint which connects the head to the body. Fragments of a copper disc would denote that Palliser projectiles were used, and a fragment of the head of a Palliser projectile is easily recognizable by the grain of the iron. PALLISER CONSTRUCTION. [Illustration: Palliser Converted Gun. (10-inch Rodman Smooth-Bore converted to an 8-inch Rifle.)] The Palliser construction is entirely applied to the conversion of old cast-iron smooth-bore guns into efficient rifles. In this system the bore of the gun is reamed out to a sufficient diameter to permit the insertion of a coiled wrought-iron tube. This tube is made up of a number of short coiled sections end-welded together. The rear of the tube is planed down, and a jacket (coiled with the spirals opposite in direction to the tube) is shrunk on. The breech end of the tube is closed by a wrought-iron disc screwed into place. The surface of the tube is then turned to a snug but not tight fit in the casing or gun, and is inserted, being held in place by a muzzle screw-collar. A screw is tapped through the chase into the tube to keep it from turning. The old vent is bored through and the gun is submitted to a course of proof-firing with full charges, to expand the tube against the wall of the casing, making a snug fit. A spiral slot is cut around the tube from front to rear, and carried through the cascabel as a tell-tale for the escape of gas in case the tube is split or cracked through at a weld. These guns are extraordinarily long-lived, and have been extensively used by the governments of Great Britain and the United States. _Palliser Projectiles._ See Pages 208-210. WHITWORTH CONSTRUCTION. [Illustration: Whitworth Muzzle-Loader.] Whitworth ordnance is used almost exclusively in the Brazilian Navy, and is the regulation type. The Whitworth construction belongs to the all-steel type, and differs in almost every particular from the other types. The guns are both muzzle and breech-loaders. The body of the gun consists of a steel tube reinforced by steel hoops. The tube is cast solid and submitted to a heavy hydraulic pressure while in a molten state, giving the metal as it solidifies a perfectly homogeneous crystallization throughout. This tube is bored completely through, and in the muzzle-loaders the breech end is closed by a steel screw-plug. The hoops are hollow cast and forged on a mandrel, the lengths in the different layers being accurately turned and screwed together; the layers are then put on the gun _cold_ and forced home (from the muzzle end) by hydraulic pressure, the forcing being carefully gauged so as not to crush the metal of the tube. [Illustration: Whitworth Breech-Loader.] The breech-loaders are slotted across the rear face in such a manner that the rear face of the block is entirely exposed, thus saving in length of breech of gun. The breech-block is cubical, and is traversed along the upper and lower surfaces by heavy threads set at an angle with the face of the block. These threads travel in heavy male threads in the slot, the system forming the support for the thrust on the block. Attached to the rear face of the block is a weighted crank which revolves a cogged wheel housed in the block and travelling in a rack in the rear of the lower side of the block-seat. In guns of heavy calibre the system is reversed, the crank and wheel housing in the rear of the gun and the rack in the block. By means of this gearing the block is moved transversely, masking and unmasking the bore, the left end of the block being cut for a loading-hole. A stop on the face of the breech locks the block when home and catches it at the proper point when open. [Illustration] The Whitworth groove is of a peculiar nature, being almost a perfect hexagon, and having an extremely sharp twist of from one turn in 2 feet in the 2-pdr. to one turn in 13 feet in the 9-inch. The projectiles are cut to fit the grooves, the armor-punching ones being of compressed steel. [Illustration: Whitworth Projectiles.] THE VAVASSEUR CONSTRUCTION. Vavasseur ordnance is used considerably in China, and has found some use in other quarters of the world. The gun belongs to the steel type. It consists of a mild-steel oil-tempered tube, reinforced by steel hoops, the hoops being narrow and numerous and shrunk on. The trunnion-hoop is of wrought iron. The gun has, properly speaking, ribs instead of grooves, the grooves being cut in the projectiles. The twist is a constant one. [Illustration}] [Illustration: Vavasseur Gun and Carriage.] The gun-carriage possesses a peculiar recoil arrangement, consisting of a heavy screw-shaft traversing the middle of the slide and carrying at its forward end a wrought-iron friction-wheel with a metal strap worked by a lever, by which any desired amount of friction may be applied. Attached to the carriage is a sleeve or clutch grasping the screw-shaft. When the gun recoils, the motion of the sleeve along the shaft causes the latter to revolve, the friction being regulated by the friction-band. For running in and out a large cog-wheel is fixed to the inside of each carriage-bracket, the cogs taking in racks along the sides of the slide. In starting the gun out, the motion of starting slacks the friction-band on the screw-shaft, allowing the gun to run freely; for controlling the motion in a seaway, a small friction-brake on the rear of the slide is used. The carriage is mounted on eccentric rollers, and the movement of throwing them out of or into action ungears or gears the running-out cranks outside of the brackets, so that in recoiling the cranks are not thrown around. The chamber of the Vavasseur gun, as originally constructed, is smaller than the bore, being in this a reversal of the present accepted true principle, and limiting the guns to small charges and low velocities. FRENCH ORDNANCE. A = Over all. B = Bore. C = Number of Grooves. -----------------------+--------+---------------+---- NAME, NATURE, AND | | LENGTH. | CLASSIFICATION. | +-------+-------+ |Calibre.| A | B | C -----------------------+--------+-------+-------+---- | In. | In. | In. | French pattern, cast-iron, steel-lined Breech-loaders. Model of 1870. | | | | 32 cm. | 12.6 | 264 | 244 | 32 27 ” | 10.8 | 212 | 194 | 28 24 ” | 9.46 | 195 | 179 | 24 19 ” | 7.64 | 164 | 151 | 20 16 ” | 6.49 | 146 | 135 | 16 14 ” | 5.46 | 123 | 115 | 14 Model of 1864-67. | | | | 27 ” | 10.8 | 184 | 167 | 5 24 ” | 9.46 | 180 | 165 | 5 19 ” | 7.64 | 150 | 138 | 5 16 ” | 6.49 | 133 | 124 | 3 14 ” | 5.46 | 81 | 73.6 | 3 Bronze Muzzle-loaders. | | | | 12 cm. | 4.78 | 81.4 | 71.5 | 6 4 ” | 3.41 | 37.8 | 31.7 | 6 Hotchkiss Machine-gun. | 1.46 | 51.2 | 29.1 | Model of 1858-60 Muzzle-loaders. 22 cm. | | | | 16 ” | | | | 14 ” | | | | -----------------------+--------+-------+-------+---- D = Twist of Rifling. E = Gun, including Breech-block. F = Breech-block. G = Preponderance. -----------------------+------+----------------+---- NAME, NATURE, AND | | WEIGHT. | CLASSIFICATION. | +--------+-------+ | D | E | F | G -----------------------+------+--------+-------+---- | Cal. | Lbs. | Lbs. | Lbs. French pattern, cast-iron, steel-lined Breech-loaders. Model of 1870. | | | | 32 cm. | 0/45 | 85,800 | 1,540 | 396 27 ” | 0/45 | 51,040 | 1,100 | 88 24 ” | 0/45 | 34,400 | 726 | 88 19 ” | 0/45 | 17,500 | 352 | 88 16 ” | 0/30 | 12,000 | | 103 14 ” | 0/30 | 5,900 | 176 | 103 Model of 1864-67. | | | | 27 ” | 0/30 | 45,100 | 704 | 24 ” | 0/30 | 31,900 | 567 | 19 ” | 0/30 | 17,610 | 295 | 16 ” | 0/30 | 11,000 | 191 | 330 14 ” | 0/30 | 4,100 | 103 | 165 -----------------------+------+--------+-------+---- Bronze Muzzle-loaders. | | | | 12 cm. | | 1,360 | | 176 4 ” | | 220 | | 33 Hotchkiss Machine-gun. | | 440 | | -----------------------+------+--------+-------+---- Model of 1858-60 Muzzle-loaders. 22 cm. | | | | 16 ” | | | | 14 ” | | | | -----------------------+------+--------+-------+---- A = Carriage. B = Slide. C = Steel. D = Chilled. E = Common. F = Canister. G = Bursting Charge Common Shell. ------------------+-------------+-----------------------+-------------- NAME, NATURE, AND | Carriage. | Projectiles. | CLASSIFICATION. +-------------+-----------------------+-------------- | Weight. | Complete Weight. | Weight. +------+------+-----+-----+-----+-----+-------------- | A | B | C | D | E | F | G ------------------+------+------+-----+-----+-----+-----+-------------- | Lbs. | Lbs. | Lbs.| Lbs.| Lbs.| Lbs.| Lbs. French pattern, cast-iron, steel-lined Breech-loaders. Model of 1870. 32 cm. | | | 770 | 770 |630 | | 37.4 27 ” |10,230|12,960| 475 | 475 |396 | 317 | 24 +------+------+-----+-----+-----+-----+----- 24 ” | 7,304| 8,140| 317 | 317 |264 | 220 | 17 | 5,720| | | | | | +------+------+-----+-----+-----+-----+----- | 4,664|11,550| | | | | 19 ” | 4,400| 3,410| 165 | 165 |137.5| 114| 7 +------+------+-----+-----+-----+-----+----- 16 ” | 3,520| 9,460| 99 | 99 | 84 | 69| 14 ” | 2,085| 1,287| | | 46 | 41| 2.4 Model of 1864-67. 27 ” |10,230|12,980| | 475 | 317 | 321| 14.6 +------+------+-----+-----+-----+-----+----- | | | | | | 211| 24 ” | 5,720| 8,140| | 817 | 220 | 220| 10.3 +------+------+-----+-----+-----+-----+----- 19 ” | 4,400| 3,410| | 165 | 115 | 105| 4.8 +------+------+-----+-----+-----+-----+----- 16 ” | 3,520| 9,460| | | | | | 2,639| 1,260| | 99 | 69 | 66| 3 +------+------+-----+-----+-----+-----+----- 14 ” | 1,540| 1,100| | | 41 | 27 | 2.1 | | | | | | 39.6| ------------------+------+------+-----+-----+-----+-----+----- Bronze Muzzle-loaders. 12 cm. | 1,023| | | | 25 | 24.6| 1.1 | 385| | | | | | +------+------+-----+-----+-----+-----+----- | 352| | | | | | 4 ” | 319|231 | | | 10 | 10| .17 ------------------+------+------+-----+-----+-----+-----+------ Hotchkiss Machine-gun. Model of 1858-60 Muzzle-loaders. 22 cm. | | | | | | | 16 ” | | | | | | | 14 ” | | | | | | | ------------------+------+------+-----+-----+-----+-----+----- A = Steel and Chilled Shot. B = Common Shell. C = Ordinary. D = Saluting. E = Steel. F = Chilled. G = Common. ------------------+------------------------+-------------------- NAME, NATURE, AND | POWDER CHARGE. | INITIAL VELOCITY. CLASSIFICATION. +-----+------+-----+-----+-----+-------+------ | A | B | C | D | E | F | G ------------------+-----+------+-----+-----+-----+-------+------ |Lbs. |Lbs. |Lbs. | Lbs.|Feet.| Feet.| Feet. French pattern, cast-iron, steel-lined Breech-loaders. Model of 1870. | | | | | | | 32 cm. |132 |132 | | |1,394| 1,394 | 1,496 27 ” | 92.4| 92.4 |52.8 |19.8 |1,417| 1,417 | 1,542 24 ” | 61.6| 61.6 |35.2 |13.2 |1,443| 1,443 | 1,555 19 ” | 33 | 33 |17.6 | 7.7 |1,456| 1,456 | 1,726 16 ” | 20.9| 20.9 | | |1,575| 1,575 | 1,660 14 ” | | 9 | 9 | 3.3 | | | 1,493 Model of 1864-67. 27 ” | 79.2| 52.8 |52.8 |19.8 | | 1,086 | 1,188 24 ” | 52.8| 35.2 |35.2 |13.2 | | 1,115 | 1,188 19 ” | 27.5| 17.6 |17.6 | 7.7 | | 1,128 | 1,168 16 ” | 16.5| 11 |11 | 5.5 | | 1,132 | 1,197 14 ” | | 4.4 | 4.4 | 4.4 | | | 1,053 ------------------+-----+------+-----+-----+-----+-------+------ Bronze Muzzle-loaders. 12 cm. | | 2.2 | 2.2 | 2.2 | | | 1,007 4 ” | | .66| .66| .66| | | 738 Hotchkiss Machine-gun. | .18| | | | | 1,318 ------------------+-----+------+-----+-----+-----+-------+------ Model of 1858-60 Muzzle-loaders. 22 cm. | | | | | | | 16 ” | | | | | | | 14 ” | | | | | | | ------------------+-----+------+-----+-----+-----+-------+------ -------------------+------------------------------+----------------- NAME, NATURE, AND | MUZZLE ENERGY. | PENETRATION. CLASSIFICATION. +---------+----------+---------+-------+--------- | Steel. | Chilled. |Common. | Steel.| Chilled. -------------------+---------+----------+---------+-------+--------- |Ft. Tons.| Ft. Tons.|Ft. Tons.| In. | In. French pattern, cast-iron, steel-lined Breech-loaders. Model of 1870. 32 cm. | 10,390 | 10,390 |9,730 | 14.5 | 14.5 27 ” | 6,596 | 6,596 |6,506 | 12.5 | 12.5 24 ” | 4,561 | 4,561 |4,414 | 11.1 | 11.1 19 ” | 2,330 | 2,330 |1,828 | 9 | 9 16 ” | 1,698 | 1,698 |1,598 | 8.2 | 8.2 14 ” | | | 712 | | Model of 1864-67. 27 ” | | 3,871 |3,088 | | 9.6 24 ” | | 2,821 |2,144 | | 8.75 19 ” | | 1,451 |1,081 | | 7.0 16 ” | | 876 | 687 | | 5.87 14 ” | | | 314 | | -------------------+---------+----------+---------+-------+--------- Bronze Muzzle-loaders. 12 cm. | | | 176 | | 4 ” | | | 39 | | Hotchkiss Machine-gun. | | | | .94 -------------------+---------+----------+---------+-------+--------- Model of 1858-60 Muzzle-loaders. 22 cm. | | | | | 16 ” | | | | | 14 ” | | | | | -------------------+---------+----------+---------+-------+--------- GUNS. Smooth-bore guns are entirely obsolete, except for saluting purposes at dock-yards. The rifled ordnance consists of the cast-iron breech-loader, model 1870, the cast-iron breech-loader, model 1864-67, the cast-iron muzzle-loader, model 1858-60, the bronze muzzle-loader, the mitrailleuse, and the Hotchkiss machine-gun. A new all-steel pattern is being introduced into the service, whose attachments are quite similar to the model of 1870. The two models of breech-loaders differ radically in the style of rifling, and although the breech mechanism is the same in principle in both types, it is quite different in detail. _Breech-Loader, Model 1870._ Guns of this type consist of a cast-iron body strengthened by a steel tube and steel hoops. The steel tube, which is about one quarter of a calibre in thickness, is inserted into the bore from the rear, and is set fast by a heavy male screw-thread worked at its rear end. It extends a short distance forward of the trunnions. The steel hoops are shrunk on over the cast-iron body, and cover all that part occupied by the tube. For the 14-cm. calibre there is but one row of hoops; for the higher calibres two rows breaking joints. The trunnions form a part of the hoop next to the forward one. In all calibres above 16-cm. this trunnion-hoop is thicker than the others, and forms a salient on the surface of the gun. [Illustration: 27-cm. French Gun, Model 1870.] The bore is rifled on the multigroove system, with an increasing twist of from 0° at the breech to 4° at the muzzle, the direction of the twist being from right to left (contrary to the invariable rule in other countries). The chamber proper is divided into four parts: the shot-chamber, the powder-chamber, the gas-check seat, and the breech-block seat. The shot-chamber is conical in shape, small end forward, the rifling vanishing at this point in an easy slope. The diameter of this end is the same as that of the bore measured across the grooves. The rear end is joined to the powder-chamber by a second small cone, against which the rear ring of the projectile takes when home. The powder-chamber is cylindrical, and of a diameter slightly greater than that of the bore. The gas-check seat is of considerably greater diameter than the powder-chamber. It is conical in shape, small end forward. [Illustration: Breech-Block (Gun open).] [Illustration: Breech-Block (Gun closed).] The breech-block seat is cylindrical, having a heavy screw-thread around its wall, which is cut into three equal sectors, leaving three blanks of the same width. One of these blanks comes at the bottom of the seat, in order to allow the breech-block to slide back and forth. The breech mechanism consists of two main parts, the block and the console or bracket, which is hinged to the face of the breech and holds the block when it is withdrawn from its seat. [Illustration: Gas-Check (1871).] The breech-block is a steel cylinder having heavy screw-sectors about its surface to correspond with those in the seat. The last turn of screw-thread is left entire in order to relieve the shock of closing the breech. The forward face is made movable in order that when it becomes worn and scored by the action of the powder-gas it may be changed. This face is a steel disc which sets flat against the face of the block, and is of the same diameter. It seats in the face of the block by means of a smaller cylinder or trunnion, and projecting from the rear of this trunnion is a steel rod, which passes completely through the axis of the block and carries the vent. In order to prevent the disc from having any independent motion, a small tenon on its rear face enters a socket in the face of the block. The disc is keyed fast by a small pin which is screwed radially through the block near the middle, the end of the pin taking in a score cut in the vent-rod. A small catch, projecting from the rear lower side of the block, holds the console in place when the breech is closed. The rear face of the block is provided with two parallel handles screwed to it, to assist in moving it, and a long crank-handle between them for revolving the block. At the end of this crank-handle there is a slight projection made to receive the blows of any instrument that may be used to drive the block around when it works stiffly. Along the two lower blanks of the block slots are cut, in which traverse small projections of the console to hold the block steady. About the middle of the lower screw-sector a small hole is cut into which a small stop springs when the block is withdrawn to its limit on the console. The vent is provided with a copper bush at its forward end and a steel one at its rear. The console is semi-cylindrical, and is hinged to the face of the breech so that when the breech-block is withdrawn it may be swung to the right and unmask the bore. It is provided with a spring stop and two small projections taking in the block, which limit the movement of the latter and hold it steady when resting on the console. Two small pins, screwed into the face of the breech, limit the arc of movement of the crank-handle, one at the vertical point and the other 60° to the right. A small stop attached to the face of the breech holds the crank-handle fast when the breech is closed. This stop allows the handle to pass in closing, but must be raised by hand in opening. The gas-check is of copper, and is a fixture in its seat. It is a ring in reality, the centre being cut out to permit the passage of the charge through it in loading; the edge is turned up, forming a cup, the outer part being conical to fit the seat. The bend of the rim is quite thick, and a gutter is cut around it in order to make the powder-gas seal the joint properly. The bottom of this ring is provided with three concentric grooves to break the force of the gas that may escape through the joints. When the breech is closed the face of the block presses directly on the gas-check, and a copper ring is countersunk in the face of the block which forms the contact with the check. This ring has grooves to correspond with the grooves on the back of the gas-check. The vent is horizontal, and is situated in the axis of the breech-block. Its outer end is formed in double-cone shape (throughout the steel bush), the small ends of the cone being joined. Percussion primers are used in connection with a spring gun-lock. (See Primers.) _Breech-Loader, Model 1864-67._ These guns are hooped like the model of 1870, but are not tubed. [Illustration: 14-cm. French Gun.] The vent is pierced vertically near the bottom of the powder-chamber, instead of being in the breech-block. The grooves are of the pattern known as the “basket-handle,” for mechanical fit projectiles (see French Groove, English Ordnance), having an increasing twist of from 0° to 6°. The 14-cm. and 16-cm. guns have three grooves, the others five. The width of the grooves is the same throughout the length of the bore, being cut back on the loading side near the powder-chamber to facilitate loading. The depth of the groove, however, diminishes towards the muzzle in order to pinch the studs and steady the projectile. At the powder-chamber and running forward for a short distance in the centre of each band is a supplementary groove, in which travel the rear studs of the projectiles, which are made so small as to easily sheer off. These secondary grooves prevent the projectile from being pushed too far into the bore. With the 19-cm. gun, the supplementary groove is made by cutting back the loading side of the regular groove. There is no shot-chamber proper. [Illustration: Groove (1864).] [Illustration: Groove (1871).] [Illustration: Rear end of Groove (1864), showing Stop for Projectile.] The powder-chamber is cylindrical, of the same diameter as that of the bore across the grooves. The bottom groove is produced through the powder-chamber, to serve as a directing groove for the projectile in loading. In rear of the powder-chamber there are two gas-check seats, conical in shape, with the small diameter forward. The rear and larger one is intended for service in case of accident to the other. [Illustration: Gas-Check (1864).] [Illustration: Breech-Block (Section).] The breech-plug seat is similar to the model 1870. The breech-closing mechanism consists of two main parts like that of the model 1870, the breech-plug and the console or bracket. The breech-plug differs from the model 1870 in being lighter, by having the interior cut away as much as possible consistent with strength. It has two movable faces or discs to correspond with the two gas-check seats. These discs are secured to the face of the plug in a similar manner to the model 1870, except that the disc in this case is allowed to revolve freely. The gas-check is carried on the face of the disc instead of being a fixture of the gun. It is quite similar to the model 1870, except that the hole in the centre is smaller and serves to secure it to the face of the disc. The centre of the disc being slightly raised carries two ears which receive the inner edge of the gas-check and centre it. Over these a solid-headed nut screws, which fixes the gas-check and makes a tight joint. The gas-check is made of steel. The console is similar to the model 1870. _Muzzle-Loader, Model 1858-60._ These guns are hooped, but have no tubes. The trunnions are cast with the body of the gun, the hoops not coming so far forward. The vent is vertical near the bottom of the powder-chamber, like the model 1864. The grooves are of the “basket-handle” type, three in number, with an increasing twist of from 0° to 6°. These grooves, near the chamber, are cut back and prolonged to form seats for the rear studs. All guns of this model are converted from old smooth-bores. _Bronze Muzzle-Loader._ These guns are of the ordinary bronze type. The 23-pdr. (canon de 12) has six common grooves having a _regular_ twist from _left_ to _right_. The bottom groove is narrowed on the loading side near the powder-chamber in order to force the studs into close contact with the driving side. The 8-pdr. (canon de 4) has six grooves with a regular twist similar to the 23-pdr. The vent is pierced vertically near the bottom of the powder-chamber. _The Mitrailleuse._ The exterior of the mitrailleuse has the appearance of a bronze cannon. This case encloses 25 rifled tubes brazed together. The rear part of the cannon presents a vertical cavity, very large and nearly rectangular in shape. This cavity is called the cage, and is intended to receive the breech-block and firing mechanism. The breech-block is a cubical block containing prolongations of the 25 barrels which serve as chambers for the cartridges. When loaded, this block drops into the forward part of the cage. The lock mechanism is a box containing 25 firing-pins, arranged with guides and springs on the ordinary system. This box is movable longitudinally by the motion of a breech-screw, which also sets up the breech-block when in place. The motion forward of this box retracts the firing-pins, which are then held until released in rapid succession by a turn of the crank. After firing, the breech-screw is backed, the block taken out and a loaded one is put in its place, the screw is set up retracting the locks, and the piece is ready for firing again. _Hotchkiss Machine-Gun._ (See United States Ordnance.) This gun is an American invention, but was first introduced into the French Navy. CARRIAGES. Gun-carriages in the French Navy are classified as follows: Slide-carriages for heavy broadside-guns. Turret-carriages and revolving-slide carriages for heavy guns. Directing-bar carriages for broadside-guns. Four-truck and rear-chock carriages for broadside-guns. Gun-boat carriages for bronze guns. Boat-carriages for bronze guns. Mountain carriages for bronze guns. Mitrailleuse saddle or fork for machine-guns. _Slide-Carriage for 27-cm. and 24-cm. Guns._ [Illustration: Elevating-Gear and Compressor, 24-cm. Gun.] The rails of the slide are of heavy double =T= iron, connected by =T= and plate iron transoms. The slide rests on a pair of conical rollers, with concentric axles forward and a double pair of rear rollers (concentric) at the rear. The forward pair of the rear rollers and the front rollers travel on smooth tracks, while the rear pair of rollers are pinions working in a rack on deck. The slide is traversed by tackles, except in fine pointing, when levers are shipped on the rear rollers and the fine traversing is done by heaving on them. A pawl working on the rear rollers secures the slide in any desired position. The recoil is checked by friction compressors. There are eight iron compressor-bars on each side of the slide, just inside of the rails, resting on the front and rear transoms. On top of the front transom is a heavy iron dumb-sheave, which receives the bight of a rope breeching. The carriage is of the ordinary form of double plate, mounted on rollers, the forward pair being in permanent action and the rear pair on eccentric axles. Tackles are used for running out and in. The compressor-plates are nine in number on each side, suspended on an axle. The outer plates are heavier than the others. The ones next to the brackets are backed by steel disc-springs. Rocking levers working in screw-threads on the axle press against the inner plates. The levers are worked by a ratchet-lever on the exterior right side, this lever being provided with a trip for throwing it down automatically in firing. Railway buffers are placed at the rear of the slide to act in case of over-recoil. The elevating-gear consists of a flat-linked chain passing underneath and supporting the breech of the gun. The ends of the chain wind about axles in the carriage-brackets, the axles being revolved by endless-screw gearing. Levers for turning this gearing ship outside the brackets. In elevating or depressing, it is necessary to turn the gearing alike on both sides in order to keep the centre link, which is marked, in its place under the breech. In elevating, the gearing must be worked slowly in order to allow the breech to follow down by its preponderance. With the 24-cm. gun, the compressor-plates, 12 in number, are all in the centre instead of being at the sides. [Illustration: Slide-Truck for 19-cm. Gun.] _Slide-Carriage for 19-cm. Gun._ The fixtures for the slide and carriage differ in several particulars from the heavier ones. The slide travels on four _pairs_ of rollers, the rear rollers of the rear pairs being cogged for fine pointing as in the heavier ones. The slide rests on iron pillars with screw-threads at the upper extremities, the lower ones resting on the axles between the rollers, forming a pair. The threaded top has a capstan-head, so that, by turning, the front or rear of the slide may be elevated or depressed. These rollers are also arranged for transporting the slide from port to port. For this they may be turned to run in the desired direction, similar to the principle of chair-rollers (casters). Clamps are provided to hold them in the desired position. The carriage has only one in-tackle. The rocking-lever compressor is changed to the ordinary bow-compressor. (See English Ordnance, Compressor for wooden-slide carriages.) _Turret-Carriage and Slide for Heavy Guns._[7] [Illustration: Additional Gearing for Elevating-Gear of Turret-Carriage.] The turret-slide, instead of being provided with rollers for traversing, is mounted on a centre-pivoting turn-table. The turret itself is fixed, the gun firing over it “en barbette.” The turn-table is mounted on sixteen conical rollers, and is revolved by means of a fixed rack, to which gears a pinion worked by a crank attachment on the slide. This attachment consists of a horizontal axle revolving in bearings through the rear of the slide-plates, having a crank at each end and a chain-wheel in the middle. An endless chain transmits the motion to gearing at the forward end of the slide, which connects with the rack on the floor of the turret. A locking arrangement holds the turn-table in the desired direction. The slide resting on its supports rises to a much greater height than with broadside-carriages, and is provided with a short stairway from the turn-table to the slide-top. The carriage is similar to the ones heretofore described, except that extra gearing is applied to the elevating apparatus to enable it to be reached by the men standing on the turn-table. Chain-gear similar to Scott’s in and out gear is used with the carriage. Instead of a movable stirrup used to catch the chain, the upper part passes through a slit in the rear transom of the carriage, so that when the rear trucks are thrown in action teeth in it catch the chain. The same style of compressor is used as is found with the 24-cm. carriage previously described, except for the 19 cm. gun, which has the ordinary cramp-compressor. [7] See plate Part IV. French Barbette Turret. [Illustration: Barbette Turret-Carriage.] _Revolving-Slide Carriage._ The slide is a centre-pivot resting on a circular track and on four rollers. It is traversed by a crank revolving gearing which works in a circular rack around the outside of the roller-circle. The carriage is similar to the ordinary type, except that it is much higher, in order to allow a greater angle of depression to the gun. Instead of in and out tackles, a runner is used which passes over a windlass fixed on the rear slide-transom. This runner throws the rear trucks in action, and then, according to its lead, runs the gun in or out. The elevating-gear for the 16-cm. gun consists of a heavy cross-bar underneath the breech, having sleeves at the extremities which clasp heavy upright screws. By revolving these screws, the bar is carried up or down. The elevating-gear for the 14-cm. gun is the old-fashioned telescopic elevating-screw. [Illustration: Training-Gear for Centre-Pivot.] [Illustration: Elevating-Gear for Centre-Pivot Carriage.] _Directing-Bar Carriage._ The carriage proper is of the ordinary rear-chock or Marsilly type, which when run out for firing is lifted from the deck on a slide or chariot, so that it may be easily and quickly trained. The chariot consists of a broad, short front-piece, mounted on two rollers; projecting forward from it is a pivot-flap which secures by a pivot-bolt just underneath the port, the rollers being canted for traversing about the pivot. Projecting to the rear from this front-piece is a tongue made of =T= iron, which is supported at its rear end on two trucks which are canted like the forward ones for traversing. When the carriage is run in, its rear end comes flush with the end of this tongue, and the forward trucks rest on the deck. In running out, however, two small rollers on the axle, inside of the brackets, catch on and mount two inclined planes which slope back from the top rear of the chariot, thus lifting the carriage completely from the deck. A breeching is used with this carriage, its bight going around a =B= block on the front of the chariot. There is also a friction compressor at the rear of the brackets, the compressor plates taking against the sides of the =T= iron, which are filled out with wood for that purpose. The forward edge of the =B= block serves as a hurter in running out. In all other respects the carriage is similar to the ordinary broadside rear-chock carriage. It is used on upper decks of large ships for light guns. _Four-Truck Carriage and Rear-Chock Carriage._ These are of the general type of old-fashioned wooden carriages. _Gun-Boat Carriages and Boat-Carriages._ These carriages are of the old-fashioned type. The former is the slide pattern, its only peculiarity being that its forward and rear rollers can be revolved for transportation on a vertical pivot. The carriage has no rear trucks. [Illustration: Directing-Bar Carriage.] [Illustration: Boat-Carriage.] The carriage is provided with holding-down clips, and the recoil is checked by a breeching whose ends are made fast to the brackets, the bight passing around a bollard on the forward transom of the slide. _Mountain-Carriage._ The mountain-carriage is similar to the English field-carriage except the elevating-gear, which consists of a plain elevating-screw to which a hand-wheel and pinion gear. _Mitrailleuse Saddle._ This consists of a pillar whose lower end ships in a socket in the ship’s rail, and whose upper end branches into a fork to support the trunnions. A longitudinal support projects from the pillar, which holds a pivoted arm by means of a clamp. This gives a quick motion for elevating or depressing. The end of the pivoted arm holds an ordinary elevating-screw for slow motion. _Hotchkiss Saddle._ See United States Gun-Carriages. GUNPOWDER. The gunpowder used in the French service is classified according to the size of grain. _Wetteren powder_, named from the place of manufacture in Belgium, is a large-grained cubical powder used in guns of the model 1870. _Ripault powder_, named from its place of manufacture in France, is an ordinary-sized cannon powder used in all guns, except the above. _Hunting powder_ is a small-grained, highly-glazed powder used in revolver cartridges. _B powder_, of a slightly larger grain than the hunting, is used in Chassepot rifle cartridges. _Musket powder_ is used in the manufacture of primers, fuses, and signals. CARTRIDGES. Cartridge-bags are made either of parchment or serge. For the smaller calibres they are of parchment. Each cartridge is marked in black with the calibre of the gun for which it is intended, the weight of charge, monogram of the place where it was filled, and date of filling. Cartridges are kept aboard ship in brass or copper tanks of various forms having water-tight covers. PROJECTILES. The projectiles used in the French Navy are shot, shell and case-shot. There are two kinds of shot, cylindrical and ogivo-cylindrical, corresponding to the shape of the head; the cylindrical being used only in the calibres above 19 cm. They are all steel. The ogivo-cylindrical shot are used in all calibres above 14 cm., and are either of steel or chilled cast-iron. Shell are of cast-iron, and are similar in shape to the ogival shot. [Illustration: Projectiles, Model 1864. Armor-Shot. Shell. Solid Shot.] [Illustration: Projectiles, Model 1870. Armor-Shot. Shell. Solid Shot.] These projectiles are differently mounted for the different models. For the model 1870 the mounting consists of a forward ring of zinc or cast-iron just back of the shoulder of the shell, slightly smaller than the diameter of the bore across the lands. Its object is simply to keep the forward end of the projectile centred. A rear ring of copper, of a diameter slightly greater than that of the bore across the grooves. This ring brings up in its seat in the shot-chamber, and on firing the bands are scored and rotate the projectile. Around the surface of this ring are two or three grooves, cut to receive the metal displaced by the lands on firing. These projectiles carry at their base a light wire grommet to facilitate handling them. For the model 1864-67 the projectiles are provided with studs, there being two rows. The forward studs take in the grooves and give the twist to the projectile; the rear ones hold the base of the projectile centred, and according to the calibre of the piece they travel in the grooves or on the lands. For the heavy projectiles, where the rear studs travel on the lands, there are provided three small intermediate studs which bring up in false grooves provided for the purpose, keeping the projectile from going too far forward in the bore when loading. These studs are sheared off on firing. The studs are made either of zinc or bronze. Projectiles for the bronze muzzle-loaders are similar to the model 1864. Case-shot are of the ordinary type, and have neither studs nor belts. Sea-weed wads are used with all projectiles except those of the model 1870. These are used in order that the powder-charge may act with a more gradual effect on the projectile at the start. Placed between the charge and the projectile, their rapid compression gives room for the powder to expand and burn more slowly at the first instant. FUSES. Percussion fuses are used in all shell except the 25-pdr. and 8-pdr. boat-guns, which use time-fuses. The percussion fuse consists of a hollow cylindrical bronze body having a solid conical head. At the bottom of the cylinder is screwed a copper firing-pin. The centre of the cylinder is occupied by a brass plunger carrying a charge of hunting powder. The forward end of this plunger carries a wooden plug which is hollow and filled with detonating composition. The plunger is held in position by two iron pins upon which the base rests, and two leaden stops through the wall of the fuse entering the shell of the plunger. These stops are not broken by the start of the projectile, but by its shock on striking an object. The bottom of the fuse, being covered by shellac-paper, is blown away by the charge of powder in the plunger, and the flame is communicated to the charge. [Illustration: Percussion Fuse.] [Illustration: Time-Fuse.] The time-fuse for boat-guns consists of a brass body having two longitudinal chambers for fuse-composition columns of different times of burning. For the 23-pdr. the times correspond to 1500 and 3000 metres; for the 8-pdr. they correspond to 1100 and 2200 metres. The longer column is always uncapped on loading. The different times are distinguishable by the difference in the caps. That for the long time is of wire; for the short time it is of leather covered with a red wafer. PRIMERS. The primers are of two kinds, percussion and friction. The former seal the vent entirely on firing, and are only used in guns having vents through the breech-block (Model 1870). Friction primers are used in all guns having vertical vents. The percussion primer consists of a body of brass or copper, slightly conical and having a solid head. Into this body screws a small steel anvil carrying an ordinary percussion-cap, which, when the anvil is screwed home, bears against the primer-head. The remainder of the body is filled with fine hunting powder, and the bottom is closed by a shellacked wafer. [Illustration: Quill Primer.] [Illustration: Percussion Primer.] The friction primer consists of two quill tubes, the lower and larger one being filled with fine musket powder, the bottom being sealed with wax. The upper is filled with fulminating composition, and has passing through its centre a brass friction-wire corrugated along its length. The exterior of the wire is formed in a loop for hooking on the firing laniard. The upper part of the primer is closed by a block of wood forming a fairleader for the friction-wire. A small independent loop is attached to the head of the primer, by which it may be withdrawn from the vent without touching the friction-wire. SIGHTS. The sights used in the French Navy are all side-sights, and for the most part the tangent-sights are inclined at a permanent angle. The front-sights are conical in shape, and are screwed into the rim-bases. The tangent-sights are square in section, working in boxes screwed to the face of the breech. They are graduated to full and half cable-lengths (200 and 100 metres). As a rule, guns are sighted on the left side, although provision is made for a right tangent and front sight. Sights are graduated on the left side for shell and on the right for shot, the graduations being all carried across the rear face. In general there is a short and a long sight, the long one being used for distances greater than 30 cables (6000 metres). ACCESSORIES. The loading-plate is a plate which attaches to the breech of the gun when the breech-block is open; along the bottom of this plate is a groove which forms a prolongation of the bottom groove of the gun (not applicable to model 1870); the projectile being hoisted to the level of the bore is landed on this plate, and is then in position to be rammed home. For small projectiles this plate serves as a shell-bearer for transporting projectiles, being provided with side handles. The shell is brought to the loading-plate on covered decks by means of a tackle appended to a roller working on a traveller. The projectile being hoisted from the deck is pushed along on the traveller to the plate. In turrets the projectile is hoisted and swung by means of a davit. The passing-box for the cartridge is made of leather with an ordinary close leather cover. The rammer and sponge are of the old-fashioned type. In calibres of a nature above 16-cm. a leather guard is always used in loading, to cover the gas-check and prevent injury from shocks in loading. A system of guards against firing the gun before the breech-block is entirely closed is attached to the breech or the breech-block. In guns of the model 1864 the guard consists of a small hollow cylinder with funnel-shaped ends, acting as a sort of fairleader for the firing laniard. On the laniard itself are worked three turk’s-heads which, when the laniard is rove through the fairleader and hooked to the primer, come forward of the forward edge. A small spring is attached to the closing-stop of the handle, which projects into the funnel and will not permit the laniard to pass. When the breech is closed, the crank pressing against the closing-stop pushes back the spring and allows a free passage to the laniard. In guns of the model 1870 the guard consists of a small disc which slides over the vent when the breech-block is opened, and remains there so that a primer cannot be inserted until the block is closed _and locked_. GERMAN ORDNANCE. A = Over all. B = Rifled Bore. C = Powder Chamber. ---------------------------+--------+-------------------- NAME, NATURE, AND | | LENGTH. CLASSIFICATION. | +-----+-------+------ |Calibre.| A | B | C | | | | ---------------------------+--------+-----+-------+------ | In. | In. | In. | In. Krupp’s pattern steel Breech-loaders. 30½ cm. hooped | 12 | 264 | 172 | 54.7 28 cm., hooped and tubed| 11.15 | 240 | 171 | 46.1 28 ” hooped | 10.34 | 240 | 171 | 46.1 26 ” long hooped | 10.24 | 225 | 138.5 | 55.3 26 ” short ” | 10.24 | 205 | 128 | 42.1 24 ” long ” | 9.27 | 206 | 136 | 38.4 24 ” short ” | 9.27 | 185 | 115.4 | 38.4 21 ” long ” | 8.24 | 185 | 124.6 | 33.7 21 ” short ” | 8.24 | 154 | 96.8 | 31.4 17 ” long ” | 6.8 | 167 | 107.5 | 40.8 17 ” short ” | 6.8 | 134 | 92.0 | 24.7 17 ” short, light hooped| 6.8 | 136 | 92.7 | 25.7 15 ” long hooped | 5.87 | 152 | 105.8 | 27 15 ” short ” | 5.87 | 129 | 86.8 | 28.5 15 ” tubed | 5.87 | 128 | 86.8 | 23.5 12 ” hooped | 4.74 | 115 | 85.7 | 14.7 8 ” heavy | 3.19 | 76 | 57.6 | 8.4 8 ” light | 3.19 | 76 | 57.6 | 8.4 8 ” | 2.20 | 62 | 45.9 | 7.7 4 ” | 1.54 | 69 | 54.7 | 9 ---------------------------+--------+-----+-------+------ D = Number of Grooves. E = Twist of Rifling. F = Gun, including Breech-block. G = Breech-block. ---------------------------+----+------+------------ NAME, NATURE, AND | | | WEIGHT. CLASSIFICATION. | | +------+----- | D | E | F | G | | | | ---------------------------+----+------+------+------ | |Calib.| Lbs. | Lbs. Krupp’s pattern steel Breech-loaders. 30½ cm. hooped | 72 | 45 |78,980|2,970 28 cm., hooped and tubed| 36 | 70 |60,500|2,244 28 ” hooped | 36 | 70 |60,500|2,244 26 ” long hooped | 36 | 50 |48,400|1,980 26 ” short ” | 36 | 50 |39,600|1,980 24 ” long ” | 32 | 70 |34,100|1,375 24 ” short ” | 32 | 65 |31,900|1,375 21 ” long ” | 30 | 68 |21,450| 858 21 ” short ” | 30 | 59 |19,800| 858 17 ” long ” | 30 | 45 |12,320| 495 17 ” short ” | 30 | 59 |11,000| 484 17 ” short, light hooped| 30 | 45 | 7,590| 411 15 ” long hooped | 24 | 45 | 8,800| 319 15 ” short ” | 24 | 68 | 7,700| 319 15 ” tubed | 24 | 65 | 7,040| 391 12 ” hooped | 18 | 60 | 3,014| 178 8 ” heavy | 12 | 46 | 714| 64 8 ” light | 12 | 46 | 650| 64 8 ” | 12 | 46 | 500| 55 4 ” | 12 | 70 | 156| 9 ---------------------------+----+------+------+----- A = Preponderance. B = Carriage. C = Slide. D = Height of Axis of Bore above Deck. E = Chilled. F = Common. ----------------------+----+-----------------+--------------------- NAME, NATURE, AND | | CARRIAGES. | PROJECTILES. CLASSIFICATION. | +------+------+---+----+-----+---------- | | | | | Full |Bursting | | | | | Weight. |Charge. | | | | +----+-----+----+----- | A | B | C | D | E | F | E | F ----------------------+----+------+------+---+----+-----+----+----- |Lbs.|Lbs. | Lbs. |In.|Lbs.|Lbs. |Lbs.|Lbs. Krupp’s pattern steel Breech-loaders. 30½ cm., hooped | |51,040| |102|715 |609.5|8 |22 28 cm., hooped | |24,200| |102|561 |477 |7.7 |25.3 and tubed | | | | | | | | 28 ” hooped | |24,200| |102|561 |477 |7.7 |25.3 26 ” long hooped | |16,500|18,075| 67|411 |367 |5.28|17.27 26 ” short ” | | 8,849|13,831| 48|411 |367 |5.28|17.27 24 ” long ” | | 8,349|13,831| 48|308 |261 |3.19|15.4 24 ” short ” | | 5,082| 8,756| 39|308 |261 |3.19|15.4 21 ” long ” | | 4,290| 6,556| 40|216 |175 |2.75|10.45 21 ” short ” | | 4,114| 6,402| 42|216 |175 |2.75|10.45 17 ” long ” | | 2,772| 4,576| 41|123 |112 |1.21| 9.24 17 ” short ” | | 2,321| 3,400| 33|121 | 99 |1.21| 6.6 17 ” short, | | 2,156| 2,068| 34|117 |112 |1.32| 5.94 light hooped | | | | | | | | 15 ” long hooped |16.5| 2,057| 3,806| 38| 78 | 78 |7.7 | 6.5 15 ” short ” |48.4| 1,947| 2,530| 34| 78 | 61 |7.7 | 4.4 15 ” tubed |62.7| 1,908| 2,640| 35| 78 | 61 |7.7 | 4.4 12 ” hooped |22.2| 1,595| 2,750| 47| 38 | 33 | | 2.48 8 ” heavy |15.4| 1,100| | 33| | 9.5| | .6 8 ” light |14.7| 880| | 35| | 9.5| | .6 8 ” |14 | 246| 246| 35| | 6.7| | .6 4 ” | | Turntable. | | |125 | | .28 ----------------------+----+------+------+---+----+-----+----+----- A = For Steel and Chilled Shot. B = For Common Shell. C = Saluting. D = Penetrating Power. ----------------------+----------------------+------- NAME, NATURE, AND | POWDER CHARGE. | CLASSIFICATION. | | +-------+-------+------+ | A | B | C | D ----------------------+-------+-------+------+------- | Lbs. | Lbs. | Lbs. | In. | | | | Krupp’s pattern steel Breech-loaders. 30½ cm., hooped | 158.4 | 158.4 | | 16.4 28 cm., hooped | 132 | 132 | | 14.4 and tubed | | | | 28 ” hooped | 132 | 132 | | 13.3 26 ” long hooped | 107.8 | 107.8 | 17.6 | 13 26 ” short ” | 107.8 | 107.8 | 17.6 | 11.5 24 ” long ” | 59.4 | 44 | 17.6 | 11.27 24 ” short ” | 59.4 | 44 | 17.6 | 10.05 21 ” long ” | 41.8 | 30.8 | 13.2 | 8.9 21 ” short ” | 35.2 | 26.4 | 13.2 | 8.55 17 ” long ” | 26.4 | 22 | 6.6 | 7.25 17 ” short ” | 17.6 | 14.3 | 6.6 | 7.33 17 ” short, | 16.5 | 16.5 | 6.6 | 7.88 light hooped | | | | 15 ” long hooped | 18.7 | 15.4 | 4.4 | 6.7 15 ” short ” | 13.2 | 12.1 | 4.4 | 6.58 15 ” tubed | 13.2 | 12.1 | 4.4 | 5.6 12 ” hooped | 7.7 | 4.62| 2.31| 5.6 8 ” heavy | | 1.1 | 1.1 | 8 ” light | | 1.1 | 1.1 | 8 ” | | .98| 1.1 | 4 ” | | .41| | ----------------------+-------+-------+------+------- E = Chilled. F = Common. ----------------------+---------------+------------------- NAME, NATURE, AND | INITIAL | WORKING EFFECT. CLASSIFICATION. | VELOCITY. | +-------+-------+--------+--------- | E | F | E | F ----------------------+-------+-------+--------+------- | Ft. | Ft. | Foot | Foot | | | Tons. | Tons. Krupp’s pattern steel Breech-loaders. 30½ cm., hooped | 1,591 | 1,623 | 12,584 | 11,176 28 cm., hooped | 1,515 | 1,640 | 8,960 | 8,931 and tubed | | | | 28 ” hooped | 1,515 | 1,640 | 7,210 | 8,931 26 ” long hooped | 1,587 | 1,640 | 6,802 | 6,876 26 ” short ” | 1,430 | 1,387 | 4,835 | 6,466 24 ” long ” | 1,502 | 1,391 | 4,625 | 3,511 24 ” short ” | 1,469 | 1,355 | 4,625 | 3,327 21 ” long ” | 1,476 | 1,394 | 3,275 | 2,348 21 ” short ” | 1,312 | 1,394 | 2,587 | 1,970 17 ” long ” | 1,548 | 1,525 | 1,944 | 1,809 17 ” short ” | 1,279 | 1,279 | 1,399 | 1,127 17 ” short, | 1,325 | 1,341 | 1,437 | 1,411 light hooped | | | | 15 ” long hooped | 1,623 | 1,615 | 1,431 | 1,172 15 ” short ” | 1,477 | 1,591 | 1,030 | 1,072 15 ” tubed | 1,358 | 1,446 | 1,001 | 888 12 ” hooped | 1,476 | 1,230 | 584 | 345 8 ” heavy | | 1,118 | | 84 8 ” light | | 1,118 | | 84 8 ” | | 1,135 | | 66.5 4 ” | | 1,837 | | ----------------------+-------+-------+--------+--------- GUNS. Smooth-bore guns are now entirely obsolete. The rifled ordnance is constructed entirely on the Krupp system of steel breech-loaders. Although the Krupp system taken as a whole is represented by three distinct types of guns corresponding to different developments of the breech-closing mechanism, but one, the latest development, appears in the armament of war vessels. There are also two types corresponding to the building of the body of the guns, but these are quite similar, the difference being simply in the use of a number of thin hoops in the later guns to replace a few thick hoops in the earlier construction. All guns except the 9-pdr. bronze breech-loader are built entirely of steel. The broadside-guns of medium calibre are divided into two classes, the long and the short gun, the latter being intended for vessels whose beam or displacement will not permit the use of the longer and heavier gun. The short gun of one calibre is, however, in all cases a more powerful gun than the long one of the next lower calibre. [Illustration] All naval guns except the converted 15-cm. calibre have a steel body strengthened by hoops. The converted gun has no hoops, it having been strengthened by boring the body up to form a casing, which was shrank over a steel tube. This tube extends from the breech-block to about one calibre beyond the muzzle. The 30½-cm. gun has three tiers of hoops, the 26-cm. and 24-cm. guns have two tiers, and the remainder one tier. The trunnions in all cases are in one with one of the hoops. The hoops are prolonged forward of the trunnions, diminishing rapidly in thickness. The bore is rifled on the multigroove plan, the rifling differing slightly according to the projectile which the gun was intended to fire. Formerly all projectiles were provided with a zinc rifling-jacket, and for such, a smooth shot-chamber was necessary, the rifling stopping at its forward end. The French style of copper bands being now used, the rifling is continued through the shot-chamber to the opening of the powder-chamber. With the zinc jackets, the grooves decreased in width from the breech towards the muzzle in order to keep a firm grip on the easily yielding metal throughout the bore. With the copper rotating belt the grooves are of the same width throughout. [Illustration] The powder-chamber is cylindrical, and about the depth of a groove wider than the diameter of the bore across the grooves. It is connected with the shot-chamber by a short cone which brings up the rear rifling-belt of the projectile in loading. In general the powder-chamber is concentric, but there are two calibres (26 cm. and 15 cm.) in which it is eccentric, its axis being slightly above that of the bore. The powder-chamber ends in a gas-check seat, which is coned and slightly countersunk forward to receive the Broadwell gas-check. Just behind the gas-check seat is the transverse breech-block seat, three of its sides being flat, and the rear or bearing side being hollowed out to a semicircular wall. The bore of the gun is continued straight through the breech, forming a loading-hole in rear of the breech-block. [Illustration: Broadwell Gas-Check, Seat, and Face-Plate.] The breech-blocks of all guns traverse the breech transversely, and they are all single blocks. There are two patterns, differing only in the shape of the rear portion, one being cylindrical and the other flat. The latter type is found only in guns where formerly a double wedge (the Kreiner system) was used, so that in changing to the single wedge there was not metal enough left in rear to permit hollowing out that face. The breech mechanism consists of the breech-block, the covering-plate, the transporting-screw, the locking-screw, the curb-chain, the gas-check, the face-plate, and the vent. The breech-block is a heavy solid steel block, generally cylindro-prismatic, sometimes square in section. The rear of this block is not parallel to the front, but inclined in wedge shape at an angle of 1° 55´. The prismatic part of the block is slightly wider than the diameter of the cylindrical part, forming at the junction an edge at the top and bottom, which serves as a guide for the block in sliding in and out. The block is much shorter than the width of its seat, so that it is not necessary to entirely withdraw it in order to unmask the bore. Except for special guns, the breech-block always draws out to the left, and its left end has bolted to it a steel plate of the same size, called the covering-plate. This plate merely serves as a holder for the locking and moving mechanism. With light breech-blocks a shackle-handle bolts to the centre of this plate for withdrawing the block. With the heavier calibre, where the block cannot be moved by hand it is worked in and out by a screw. This transporting-screw lies along the top of the block from end to end, revolving in journals; one half of the circumference only lies in the block, the other half, projecting, takes in a half-female thread in the upper wall of the gun. The end of the screw projecting beyond the covering-plate is squared so as to permit a crank to be shipped. In this manner, by revolving the screw, the block is worked out or in. [Illustration: Breech-Block (front).] [Illustration: Breech-Block (rear).] The locking-screw, as its name implies, serves to lock the block. It is on the rear part of the block, placed like the transporting-screw only half in the block, so that its thread will take in the gun-wall. Besides locking the breech, it forces the block close home and releases it, taking the strain from the transporting-screw, which might otherwise be bent by the shock of firing. The threads of the locking-screw, except the first or outer turn, are cut away for one third of the circumference, so that the action of locking and unlocking is similar to that of the French mechanism. The outer thread is left full to cover the joint when the breech is closed. A stop on this thread limits the revolution of this screw by catching on the covering-plate, so that when brought up at one point it shows the breech to be locked, and at the other that it is unlocked. The same crank is used to work the transporting-screw and the locking-screw. The curb-chain is a short chain which limits the withdrawal of the block and prevents it from being pulled all the way out. One end is fast to the lower end of the covering-plate, and the other to the gun just underneath. The Broadwell gas-check is a steel ring, fixed in the gun semi-permanently; that is, it does not move with the breech-block, although it may easily be knocked out. This ring is coned around its outer edge, which is turned up cup-shaped. The inner side of this cup-rim is shaped in gutter form, in order to make the best distribution of the gas pressure. The whole middle is cut away, of the same size as the powder-chamber, so that the charge can be passed through it. Three concentric scores are cut around the back of the check, the idea being to break the force of any gas that may escape by making it suddenly expand and contract as it forces its way by them. The rear of the gas-check projects slightly beyond the rear of its seat. The face-plate is a steel disc attached to the forward face of the block, and forming the bearing surface for the gas-check. This plate has a slightly greater diameter than the height of the block. It fits into a seat cut for it, and is prevented from turning or falling out by a little dowel and a spring-catch on the upper part of the block. As this plate wears, thin washers of brass or copper are fitted behind it. The rear face of this plate is fitted with grooves, which, from the shock of firing, attach and hold fast these washers. Each gun is provided with a spare face-plate and gas-check, and aboard ship a reserve gas-check is supplied in addition for each pair of guns. [Illustration: Vent-Bush and Vent Gas-Check.] [Illustration: Vent-Piece, showing Hook for Head of Primer.] The vent is pierced in a steel vent-bush, which traverses the breech-block in the axis of the bore. The forward part of the vent is provided with a simple arrangement for preventing the escape of gas. A small vertical chamber contains a steel ball, which in its normal position covers the vent completely. When the primer is fired, the flame drives the ball up and passes on to the cartridge, but the back-flame also striking the ball drives it down over the mouth of the vent again and seals it. The rear end of the vent-bush is provided with a hook for holding the primer in place for firing. The hook itself completely covers the mouth of the vent, having a slit for the friction-bar of the primer. It is so shaped on the rear side that the back-flame through the vent throws it back. A small knob is fixed to it for convenience in hooking and unhooking. This hook is so screwed on the end of the vent-bush that it may be easily removed, and after removing the vent-bush itself may be easily backed out of the block. Aboard ship each gun is provided with two reserve vent-bushes. The vent of the 8-cm. boat-gun is a right-angled one, pierced from the face of the block to its centre, and then, turning at right angles, passes up through the block and the wall of the gun. The joint at the top of the block is made tight by copper bearing surfaces. This vent has neither the ball for checking back-fire nor the primer-hook. All guns except boat-guns are provided with a loading-box. This is a hollow steel cylinder fitting in the loading-hole. When in place, its forward end rests against the back of the gas-check, while the rear end comes to the end of the cascabel, being provided with steadying hooks that hook into the cascabel. The charge being entered in this loading-box is pushed directly home. The boat-guns have no loading-box, but instead the right end of the breech-block is prolonged and a loading-hole is cut through it. The transporting-screw removes the block by about one and three quarter turns, as it has a very sharp pitch. Below the calibre of seventeen centimetres there is no transporting-screw, the locking-screw serving both purposes. CARRIAGES _Broadside-Carriage for the Heavy and Light 8-cm. Guns._ This carriage is of the simplest construction. It consists of two plate-iron brackets connected and braced by through-bolts. It is mounted on two trucks forward, and a single broad wooden rear chock. For the light gun, breeching-holes are made in the forward part of the carriage, the ends of the breeching shackling to bolts in the ship’s side; for the heavy gun, the ends of the breeching shackle to the brackets, the bight being shackled under the centre of the port. These carriages are provided with breast-pieces for training, a training handspike, and tackles for running out and in. The light gun is provided with the ordinary elevating-screw, but the heavy one has a rack, pinion, and hand-wheel for rapid and extreme elevating. The pinion is held by a compressing lever. The trucks are of cast-iron with brass journals. [Illustration: Broadside-Carriage for 8-cm. Boat-Gun.] _Broadside-Carriage for 12-cm. and 15-cm. Guns._ This carriage consists of two plate-iron brackets, a forward transom, and two bottom plates. The trunnion-holes, as in all other carriages, are broadened by brass journal-plates. It rests on two cast-iron trucks forward, and in rear on a rear chock. A swivel roller is fixed in the middle of this chock with a forked attachment, by which a trail handspike may be shipped at an angle of about 45°. Heaving down on this handspike lifts the rear of the carriage on the roller, and the lateral movement permitted to the handspike enables the carriage to be steered out. Bolted to the forward transom is a fork which, projecting forwards, forms a pivoting point. In running out it is necessary to run the end of this fork (which has jaws for the purpose) against the bolt provided for it to pivot about. The rear chock is of plate-iron with a brass shoe. The recoil is governed by what is called the Brookwell apparatus. This consists of a drum with a friction-band controlled by a lever at the left side. Turns of a breeching are wrapped around the drum, the ends being fast to it, and the bight shackling to the pivot-bolt in the centre of the port. In running out, cranks ship on the ends of the axle, and the breeching is in this manner wound on the drum by heaving down the brake, the friction-band is tightened on the periphery of the drum, thus easing the recoil. The power of the cranks is not sufficient to enable the gun to be run out by this arrangement, and side tackles have to be used. A reserve breeching is also kept rove, through breeching-holes in the forward part of the brackets. [Illustration: Brookwell Broadside-Carriage.] The ordinary elevating-screw is used, working in a screw-box through the rear transom. _Slide-Carriages._ Slide-carriages are used with all guns of seventeen centimetres and upwards. These carriages are classified as either carriages with fixed or with movable slides; and each of these is subdivided into slides for firing from ports or over the rail. As the necessities have arisen for modifications, changes have been made in the details of these carriages and slides, although the general form has remained the same. As a rule, the pivot centre of the slides is either in the middle of the gun-port or close to the spirketing, always forward of the body of the slide. _Slide and Carriage for Short 24-cm. and 21-cm. Guns, Pattern 1868._ The carriage-brackets are of the double-plate pattern, having a wrought-iron frame, and, connected by a bottom plate, forward and rear transoms secured by angle-irons. The carriage rests on rollers, both front and rear being on eccentric axles. The rear rollers are thrown into action by means of levers, and the act of lifting the rear of the carriage on the axle throws the front rollers into action. The bottoms of the brackets are shod with brass friction-plates for travelling on the slide. The elevating-gear consists of a metal rack and pinion. The front edge of the rack is kept against the pinion by a smooth roller against the rear edge. The pinion is worked by means of a lever and capstan-head outside of the bracket. A screw-brake holds the gear fast, it being worked by a lever. When this lever is thrown up the brake is off, when down it is set fast. The carriage is run out and in by means of tackles, but one tackle being used on each side. The carriage-block for this tackle is a double block working on a hinge midway on the forward end of the bracket. The compressing arrangement is the Elswick pattern (see English Ordnance) of iron bars and plates worked by rocking levers, and having a compressing lever outside of one bracket and a regulating lever outside of the other, the former being provided with a trip for automatic compression. The carriage has also front and rear holding-down clips bolted to the bottom plate. [Illustration: Carriage and Slide for 21-cm. Gun.] [Illustration: Slide Tackle-Block.] [Illustration: Hinged Carriage Tackle-Block.] [Illustration: Buffer.] The slide consists of two heavy double T-iron rails bent in front. They are connected by three bottom plates, and an angle-iron joining the front ends. Seven compressor-bars are laid in the centre of the slide, and from the middle to the rear bottom plate a wooden platform is laid. Two railway buffers are provided at either end for taking up the shock in violent running in or out. The fighting pivot-flap is a stout bar hinged to the front end of the slide so as to have vertical motion; a single eye in the end enters the jaws of the pivot-shackle in the centre of the port. The slide rests on front and rear rollers, the front ones being permanently in action and the rear ones, on eccentric axles, being thrown into action by levers. The 24-cm.-gun slide is provided with a windlass for running in and out and training. This consists on each side of the slide of a pinion turned by crank and gearing in a spur-wheel which carries the bollard. The out and in tackles are carried directly to the windlass. For training, the fall of the tackle is rove through a leading-block hooked just forward of the windlass to give a fair lead. Housing pivot-flaps are hinged at each end of the slide, which drop and key over bolts projecting from the deck. Bow and stern pivot-slides are provided with transporting rollers, which ship just inside the traversing rollers and work on eccentric axles. There are three traversing circles on the deck: the front and rear are for the front and rear rollers, the centre one holds the slide when it buckles from the position of the gun on it. [Illustration: Centre Pivot-Bolt.] [Illustration: Centre-port Pivot-Bolt.] [Illustration: Eccentric Axle and Handspike Socket.] [Illustration: Windlass for Training and In Tackles.] [Illustration: Front Housing-Bolt.] _Carriage and Slide for the Long 21-cm. Gun, Pattern 1869._ This pattern only differs from the former in being heavier braced. The fighting pivot-flap is not hinged, but is three-armed and secures to the slide by shackle-bolts. Shifting slides are provided with a third pair of rollers just forward of the centre of the slide, which are thrown in action when pivoting around the rear pivot-bolt; from their position, they lift the forward rollers clear of the deck when in action. _Cabin-Carriage for the Long 21-cm. Gun._ [Illustration: Training-Gear for Cabin-Carriage.] Owing to the cramped space for training bow and stern-guns, and the necessity for rapid training, geared train-wheels are used in this slide in place of the regular training-tackle. A sunken rack in the deck, midway of the slide, forms the track for a heave mitre-wheel, the axle of which cants up to the rear and is held by a journal in the rear transom. On its outer end a large spur-wheel gears in an endless screw which is revolved by cranks. The axle of this endless screw also carries the windlass-drum for aiding the in and out tackle; it is therefore necessary that the screw and spur-wheel can ungear. For this purpose the main axle is in two parts, the rear one carrying a heavy sleeve which is free to revolve, and has a female screw-thread worked in it and handles outside for turning. A male screw-thread is worked on the forward axle, and the end is also slotted to allow a tenon on the after axle to fit it. By revolving the sleeve, then, the rear axle is pushed to the rear through the rear journal, thus releasing the spur-wheel from the screw. In this carriage there is also a slight modification of the arrangement for jamming the elevating-gear. There is also but one compressor-lever working as a ratchet-lever in a ratchet-wheel on the compressor-axle. The slide-rollers of this type are on concentric axles in action permanently. [Illustration: Slide Rear Roller, showing Manner of Pinning the Roller in Action.] _Slide-Carriage for the Long 21-cm. Gun, Pattern 1873._ [Illustration: (Plan.) (Section.) Stirrup on Carriage for Endless Chain.] [Illustration: Rear of Slide, showing Training-Gear, Chain-Roller, Crank, and Recessed Rear Roller for taking Recoil.] [Illustration: Axle-Grip for Putting Training-Gear in and out of Action.] [Illustration: Training-Axle and Rear Chain-Axle with Gearing.] [Illustration: Front Chain-Roller.] [Illustration: Recoil-Hook and Countersunk Traverse.] This pattern differs from the 1868 one in having a higher slide and lower carriage, gearing for training the gun, and the Scott endless chain for running out and in. The forward rollers work automatically as in the former pattern. The levers for the rear rollers ship inside the brackets, and heave down instead of up for putting in action. The chain-clamp consists of a stirrup moving vertically, which carries the chain freely when down, but when hove up by a lever jams the links in a toothed rack. A stop on the outside of the brackets holds the stirrup when lifted by the lever. An endless chain travels on each side, but only one is used, the other one being kept as a reserve. The slide-rollers are constantly in action, and are arranged to divide with the pivot-bolt the strain of the recoil. To accomplish this the circle, or racer, is made quite narrow, and the middle part of the roller is hollowed out so as to grip both sides of it. The training-gear is similar to the one for the cabin-carriage, except with regard to connecting the screw and spur-wheel. The screw is worked on a loose sleeve, which at its left end is toothed. A movable toothed gripe revolving with the axle, but free to move along it, is brought to the sleeve or retracted from it, as desired, thus revolving the screw or leaving it free on the axle. The gripe is moved by a lever. The screw-shaft is revolved by means of pinions at each end, which gear in large spur-wheels. The axle of these spur-wheels carries, also, inside the slide, the rear rollers of the endless chain. Outside of the spur-wheels are the cranks. By this arrangement, the same gearing runs the carriage in or out and trains the slide. If the gripe be backed clear of the screw-sleeve, the training-gear is thrown out of action, and by heaving up the stirrup the carriage is clamped to the chain and run in or out. Reversing these processes, the carriage is thrown out of action and the slide is trained to the right or left. _Slide-Carriage for the Short 26-cm. Gun, Pattern 1875._ [Illustration: Gearing for Short 24-cm. Slide.] This pattern is similar in general to the one just described. The forward carriage-rollers are automatic eccentric ones, the rear work by levers, the Scott chain-gear is used for running in and out, and similar training-gear is used. The pivot-bolt does not bear any of the shock of the recoil, it being taken up partially by the slide-rollers and partially by a cramp fixed to the forward end of the slide and travelling in an undercut circle on the deck. The slide inclines to the rear to facilitate running out. [Illustration: Hydraulic Recoil Cylinder and Piston.] The main difference between this carriage and the others is the use of a hydraulic recoil cylinder working in a manner quite different from the English style. The cylinder itself is of steel, and is hung on trunnions _to the carriage_. The piston-rod runs completely through it, and is secured at each end of the slide. Both ends of the cylinder are closed by cast-iron heads with stuffing-glands. The forward head, being the one which receives the violence of the recoil, is secured by a heavy iron brace which fastens to the cylinder trunnions. The cylinder is filled with glycerine, the filling and drip holes being both at the rear end. It rests and slides on a bed fixed along the middle of the slide. The arrangement for checking recoil, and also for governing violent movements of the carriage, is contained in the piston-head. This head is made up of two discs which are bolted together, the interior face of each being hollowed out so as to form a chamber in the piston-head. Four holes are bored through each disc into the chamber, but they are not in line, the hole in one disc coming opposite a blank in the other. Four small valves close the inner ends of the forward holes, and these valves are secured to a plate which is free to move back and forth in the little chamber, and thus open or close the holes. A rod from the back of this plate passes through the hollow rear end of the piston-rod, and seats against a carriage-spring on the rear transom of the slide. This spring holds the valves forward, closing the forward piston-holes. A small hand-lever on the valve-rod enables it to be drawn back, thus opening the valves at will. The action of the compressor is as follows: The recoil of the gun carries the cylinder to the rear and violently contracts the space forward of the piston-head; the oil is forced with violence through the forward holes, pressing back the small valves and escaping by the other holes to the rear of the cylinder. As the recoil ceases, the force of the spring carries the valve-stem and its valves forward again, closing the holes. The gun is held thus in position, as it cannot run out unless the valves permit the oil to pass into the forward end of the cylinder again. The pressure, however, comes against the back of the valves and keeps them closed. A slight turn of the hand-lever opens the valves, and the oil gaining free passage permits the gun to run out. The moment that the gun starts, however, to run out violently, a single movement closes the valves and the gun is held fast. [Illustration: Piston-Head.] [Illustration: Rear End of Piston-Rod and Connections.] _Slide-Carriage for the Short 24-cm. Gun, Pattern 1876._ This carriage differs in no important point from the last mentioned, except in the training-gear, which is more compactly arranged. The training-shaft carries on its rear end, instead of a large spur-wheel, a small mitre-wheel. Instead of the endless screw on the shaft, there is a mitre-pinion worked on a loose sleeve and having the same locking apparatus as the one before mentioned. The outer gearing for revolving the train-work is similar to what has been described; the axle carrying the endless-chain rollers, however, is not continued across the slide, but each wheel is independent, its axle seating in a journal inside the slide. _Slide-Carriage for 17-cm., 15-cm., and 12-cm. Guns._ These carriages are of the ordinary pattern and simple in detail. The carriage-rollers are like the others, automatic forward and worked by levers in rear. The elevating-gear is rack and pinion style for the 17-cm., and simple screw for the others. In the carriages previous to 1875, breechings are used. Where the gun is not a shifting one, the bight is rove through holes in the forward ends of the brackets; where it is shifting, the ends of the breeching shackle to the brackets. The forward slide-rollers are permanently in action, the rear ones are worked by levers. Where the slide is a shifting one, a third pair of eccentric rollers is midway of the slide and canted for rear-pivoting. The carriage is held on the slide by front and rear clips. Carriages later than 1875, unless they are of the newest type, have Elswick compressors; the latest have the before-mentioned hydraulic recoil cylinder in some instances, and in others the English style. These slides all have rear housing-bolts as above described. Where the fighting pivot-arm is long, a front housing-bolt and lip are used; if it is short, there is none. Tackles are used entirely for running in and out. _Half-Slide Carriage for the 17-cm. Gun, Pattern 1875._ [Illustration: (Side View.)] [Illustration: (End View.) Half-Slide Carriage for 17-cm. Gun.] The general plan of slide and carriage is similar to the foregoing. The slide is, however, very low and short, its rollers being permanently in action. The carriage has two front rollers on eccentric axles worked by levers. The rear of the carriage is somewhat longer than ordinary, and under it is hung a single long roller, which, when the gun is run out, does not touch the deck. In recoiling it drops to the deck and supports the rear of the carriage. The recoil is checked by the Elswick compressor, and in addition a breeching is provided, whose bight runs through holes in the front of the bracket. Rack and pinion elevating-gear is used. In slides intended for shifting ports, the rollers can be turned around a vertical axis and be locked so as to move the slide sideways. _Slide-Carriages for Light Guns Firing over the Rail._ The only difference between these and the others is that the slide is much higher and is centre-pivoting. In order to take off the shock of recoil from the pivot-bolt, the slide-rollers overlap the circles on both sides. _Slide-Carriage for the 30½-cm. Gun for Armored Gun-boats._ The general principle of the carriage is the same as the ordinary one. Its front and rear rollers are the same, and the elevating-gear is the rack and pinion type, the power being increased in accordance with the greater weight to be moved. The carriage is heavier braced, having three transoms in place of two. There are no out-tackles or chain-gearing, the slope of the slide (6°) being sufficient to run the gun out by its own weight. When it is necessary to run it in, in-tackles are used, the falls being taken over windlass-heads on the rear hurter of the slide. The slide is centre-pivoting, and traverses on four heavy rollers which overlap the edges of the circles to take the force of the recoil. A cramp under the forward end of the slide moving in an undercut circle on deck also takes the recoil shock. The gun is traversed by gearing. Just inside the roller-circles is a circular rack into which a pinion gears; the inner end of the pinion-axle carries a mitre-wheel whose upper and lower cogs gear in mitre-pinions which are worked on loose sleeves on a vertical axle. Between these pinions, revolving with the axle, but free to move vertically, is an iron grip which catches in the upper or lower pinion, according as it is desired to sweep the gun to the right or left. The vertical axle passes down to the lower deck, where is a train-work with crank-handles to be revolved by six men. By means of the single grip arrangement between the mitre-pinions, the gun may be traversed to the right or left or stopped without reversing the motion of the crank-handles below. The hydraulic recoil cylinder above described is used to check the recoil and control the running out of the gun. A sheet-iron musket-proof shelter is raised on the slide for the protection of the gun’s crew. For lifting the projectile to the gun a derrick is fixed at the rear of the slide. The fall of the whip is taken around a windlass-head, and the davit is swung around by means of an endless screw and pinion. [Illustration: Front Half of Slide for Centre-Pivoting Gun-boat Carriage.] [Illustration: Gear below Deck for Revolving Gun-boat Carriage.] _Turret-Carriage for the 21-cm. Gun (Arminius)._ [Illustration: Turret-Carriage for Minimum Port. (See next page.)] The turret-slide is fixed, and forms a part of the turret. The rails incline forward at an angle of 6°, so that out-tackles are unnecessary. The carriage-rollers are of the ordinary type. But one lever is used in throwing the rear trucks in action, as there is not room to work on the inside of the carriage. For running in, two chains shackle to the turret in rear of the gun and pass over a drum in the centre of the carriage. The drum is revolved by gearing. The recoil is controlled by the Elswick compressor. The elevating-gear is the single-screw type. _Turret-Carriage for the 24-cm. Gun, Pattern 1874._ This carriage, intended for a small port, differs in height and shape from the previous ones in order to permit a vertical elevation and depression of the gun-trunnions. It is built on the double-plate plan, with heavy transoms and bottom plates. The four carriage-rollers are arranged in the usual manner, the levers for throwing the rear trucks in action being moved by a tackle. The elevating-gear is fixed to the chase of the gun forward of the trunnions. It is of the ordinary rack and pinion type, but does not connect with the carriage, being hung in a frame which projects from the trunnions. The gun is run in and out by means of the endless-chain gear, the gearing being connected to a long shaft outside of the turret, to which three hand-wheels are attached. These hand-wheels are of course underneath the upper deck, coming out directly under the port. The recoil is governed by a hydraulic recoil piston, the arrangement in this case being identical with the English system. (See English Ordnance.) The trunnions have three positions, the lower, middle, and upper. They are supported in a saddle whose arms travel in a framework in the brackets, being supported by iron blocks inserted through holes in the sides of the brackets. The saddle is raised by a hydraulic press, which is so fixed in the turret that the piston takes against the bottom of the saddle when the gun is run out. The details of this arrangement are precisely similar to those of the corresponding English turret-carriage. The slide-rails are fixed in the turret with a slope to the front of 5°. In addition to the chain nipping-gear and the hydraulic recoil piston, the gun-carriage is provided with bow-compressors on each side. (See English Ordnance.) _Boat-Carriages._ The boat-carriage complete consists of a wooden slide bound together in front and rear by iron plates, and a composite carriage made up of a wooden bed surmounted by an iron bed-plate and bracket-frames for the trunnions. Two buffers are put at the rear of the slide to take an over-recoil. The elevating-gear is the simple screw and hand-wheel. The compressor is a brass-faced block whose upper side takes in undercut spaces in the slide. The block is held up and tightened by a screw and hand-clamp. For transporting the boat-carriage and gun together a small block-cart is used, which is nothing more than a heavy, flat, wooden body provided with an axle and two gun-trucks. [Illustration: Boat-Carriage.] _Field-Carriages._ The field-carriage is of the ordinary type, consisting of two straight iron brackets, strengthened along the upper edge by angle-irons, and curved to form a sole at the bottom. To this a trunnion socket-frame is bolted. The brackets are braced by transoms and by two side rods. An iron axle bolts to the under side of the brackets just in rear of the trunnion-holes. The wheels are wooden with brass hub-boxes and iron tires. The elevating-gear is of the plain screw and hand-wheel pattern. A limber is provided with this carriage which carries two ammunition-boxes, each of which holds six rounds of shell and the corresponding cartridges (not fixed to the projectile). The carriage itself also carries two ammunition-boxes of the same size. [Illustration: Field-Carriage.] GUNPOWDER. [Illustration] The gunpowder used for the majority of naval guns is of the kind known as prismatic powder. Of this there are two classes. The first, for use with the heaviest calibres, is solid; that for medium calibres is pierced with holes longitudinally—for the high calibres with one central hole, and for the medium with seven. Large-grained cannon-powder is used in shell-guns, whilst the usual classes of small-grained powder is used with small-arms and for shell-charges. Prismatic powder is invariably used for battering-charges in all calibres, the gradation with regard to time of burning being obtained by the holes pierced through the grains: slow powder, solid; medium, one hole; quick, seven holes. PROJECTILES. The projectiles used in the German Navy are shot, shell, case-shot, and shrapnel. Shot are either solid or hollow for the lighter calibres, and hollow for the heavy ones. They are of ordinary cast-iron, chilled cast-iron, and steel, the solid shot being invariably made of ordinary cast-iron. They are of two different types, according to the style of rifling arrangement. In the earlier patterns, all projectiles were provided with a lead belt extending from the shoulder to within about two inches of the base. To receive and hold this jacket, broad shallow grooves were cut around the circumference of the projectile, the ridges left having slots cut through them at intervals to resist the tendency of the jacket to slew around. The jacket was moulded around the projectile and zinc-soldered. Corresponding with the grooves in the projectile, there were grooves in the jacket to receive the overflow of metal forced back when the projectile took the rifling. [Illustration: Chilled Shot. Common Shell. Chilled Shot. Common Shell. Long Shell. Segment Shell. Common Shell. 27-cm. Gun. 15-cm. Gun. 17-cm. 8-cm.] In the late patterns, instead of a jacket, two rings are used; the forward one being for centring or holding steady the head of the projectile, and the rear and larger one for rifling. This rear one is provided with grooves to receive the overflow of metal. Both rings are copper. The steel and chilled shot are very similar in appearance. Shell are similar in exterior shape and appointment to shot, and are all made of ordinary cast-iron. Double shell (see English Ordnance) are used with the 17-cm. and 15-cm. calibres. Case-shot are of the ordinary pattern. Shrapnel are only used with boat-guns, and are similar in construction to the English. (See English Ordnance.) Solid shot are used only with the 17-cm. and 15-cm. guns. Case-shot are not used with boat-guns. Hollow-shot, shell, and case-shot are used with all the higher calibres. Fuses are not used with hollow-shot, the bases of which are closed by a gun-metal screw-plug. FUSES. [Illustration: German Percussion Fuse.] Both percussion and time fuses are used in the shells of all calibres. The percussion fuse consists of a plunger having a fire-hole through the centre and surmounted by a pointed anvil. This is dropped into the fuse-hole of the shell, and hangs on a shoulder in the wall of the fuse-hole. Even with the point of the anvil a hole is bored through the wall of the shell horizontally, into which a pin is inserted whose inner end covers the anvil and keeps it from going forward. A gun-metal case screws into the end of the fuze-hole, and into this screws a small cap carrying the fulminating composition. When the gun is fired the centrifugal force throws the pin out, and when the projectile strikes the plunger rides forward against the fulminate and explodes it. The fulminate-cap and the pin are not inserted until the projectile is brought to the gun, the mouth of the fuse-hole being kept sealed by a wafer. The Krupp time-fuse consists of a gun-metal body which screws into the fuse-hole and has two chambers. The lower one, containing the blowing-charge, opens into the shell. It is solid to the rear, except a diagonal channel on one side which is pierced up and opens on a small table which carries the fuse-composition disc. The latter is circular and on the principle of the Bormann fuse, its exterior wall being marked for seconds and fractions. The upper chamber of the fuse is open at its upper extremity and closed at the lower, except several side channels leading to the composition disc. In the bottom of this chamber is a pointed anvil. The fuse-cap is ogival and screws over the tipper chamber, fitting tightly down on the composition disc. In this cap is a plunger loaded with fulminating composition at its lower end, and suspended by five small tenons. The composition is ignited by the percussion part of the fuse on firing. A safety-pin passes through the fuse-cap and plunger, and is withdrawn when the shell is brought to the gun. [Illustration: German Time-Fuse.] PRIMERS. Friction primers are used altogether. These are of the same type as those used with English guns. (See English Ordnance.) SIGHTS. [Illustration: Sight-Bush and Clamp.] [Illustration: Rear-Sight.] [Illustration: Front-Sight.] [Illustration: Rear-Sight for Light Guns.] The sights used with naval guns are all of the tangent pattern, and all except the boat-guns are provided with sights on both sides. The socket for the tangent-sight is bored through the breech-piece, the upper part having steel or bronze bushing and a clamp-screw passing through at right angles. The sight is cylindrical, with a flat rear surface on which is marked elevations to sixteenths of degrees. On the left cylindrical side, elevations for every 100 metres are marked for common shell, and on the right for chilled or steel shot. The head of the sight consists of a rectangular cross-head fastened to the top of the bar, in whose upper surface a swallow-tailed groove is cut in which travels the sight-notch. On the face of the cross-head, gradations of sixteenths of a degree corresponding to elevations are marked, and the sight-notch carries a small pointer. The gradations are marked each way so as to account for drift and deviation to the right or left. The forward sight is cylindrical, with a conical point, and screws into the trunnion-hoop. Sights for boat-guns differ in having gradations only on the rear face, and the sliding leaf works by an endless screw. These sights are all vertical. With some boat-guns, however, the tangent-sight is placed at a permanent angle of deflection, in which case there is no sliding leaf. ITALIAN ORDNANCE. A = Calibre. B = Over all. C = Rifled Bore. D = Powder Chamber. -------------------------+------+---------------------- NAME, NATURE, AND | | LENGTH. CLASSIFICATION. | | | +-------+-------+------ | A | B | C | D | | | | -------------------------+------+-------+-------+------ | In. | In. | In. | In. Armstrong pattern Muzzle-loaders. 43 cm. | 17 | 392 | 311.3 | 52 28 ” New Model | 11 | 173 | 120.5 | 24.4 28 ” Old ” | 11 | 173 | 119 | 26 25 ” No. 1 Long | 10.1 | 173.2 | 119.1 | 26 25 ” ” Short | 10.1 | 167.6 | 113.9 | 26 25 ” No. 2 | 10.1 | 156.1 | 111.1 | 14 22 ” | 9 | 156.1 | 105.6 | 19.7 20 ” | 8 | 130 | 88.6 | 15.8 Cast-iron Muzzle-loaders. 16 ” Wrought-iron Tube | 6.5 | 142.1 | 104 | 13.8 16 ” | 6.5 | 126.7 | 94.1 | 13.9 Armstrong Breech-loader. 12 ” | 4.7 | | 70.4 | 19.7 Bronze Breech-loader. 7.5 ” | 2.95| 70.1 | 52.4 | 10.2 Bronze Muzzle-loaders. 8 ” | 3.4 | | 45.3 | 9.8 8 ” | 3.4 | | 31.9 | 3.5 Cast-Iron Muzzle-loader. 12 ” | 4.77| | 73.3 | 6.3 -------------------------+------+-------+-------+------ E = Number of Grooves. F = Twist of Rifling. G = Gun entire, including Breech-block. H = Preponderance. -------------------------+----+-------+---------+-------- NAME, NATURE, AND | | | WEIGHT. | CLASSIFICATION. | | | | | | +---------+ | E | F | G | H | | | | -------------------------+----+-------+---------+-------- | | Calib.| Lbs. | Lbs. Armstrong pattern Muzzle-loaders. 43 cm. | 27 | 0/45 | 222,300 | 9,980 28 ” New Model | 9 | 0/35 | 55,800 | 28 ” Old ” | 8 | 0/45 | 55,800 | 25 ” No. 1 Long | 7 | 0/40 | 40,100 | 25 ” ” Short | 7 | 0/40 | 40,400 | 25 ” No. 2 | 8 | 55 | 27,000 | 620 22 ” | 6 | 0/43 | 28,260 | 20 ” | 6 | 45 | 15,680 | 805 Cast-iron Muzzle-loaders. 16 ” Wrought-iron Tube | 6 | 42.5 | 11,440 | 1,065 16 ” | 6 | 42.5 | 7,920 | 924 Armstrong Breech-loader. 12 ” | 27 | | 2,640 | 59.4 Bronze Breech-loader. 7.5 ” | 12 | 48.6 | 596 | 79.2 Bronze Muzzle-loaders. 8 ” | 6 | 25 | 726 | 8 ” | 6 | 25 | 240 | Cast-Iron Muzzle-loader. 12 ” | 6 | 27 | 2,948 | -------------------------+----+-------+---------+-------- A = Weight of Carriages. B = Height of Axis of Trunnions above Deck-level. C = Steel. D = Chilled. E = Common. F = Ordinary. G = Saluting. -------------------------+--------+----+---------------------------- NAME, NATURE, AND | | | PROJECTILES. CLASSIFICATION. | | +----------------+----------- | | | Weight | Bursting | | | Complete. | Charge. | | +-----+----+-----+-----+----- | A | B | C | D | E | D | E -------------------------+--------+----+-----+----+-----+-----+----- | Lbs. | In.| Lbs.|Lbs.| Lbs.| Lbs.| Lbs. Armstrong pattern | | | | | | | Muzzle-loaders. 43 cm. | | |2,000| | | 37 | 28 ” New Model |17,820 | 52 | 528|528 | 200 | 5.7| 26 28 ” Old ” |17,820 | 52 | 528|530 | 200 | 5.7| 26 25 ” No. 1 Long |15,750 | 44 | 294|300 | 188 | 5 | 24 25 ” ” Short |15,590 | 46 | 294|300 | 188 | 5 | 24 25 ” No. 2 |12,620 | 42 | 288|284 | 135 | 3.3| 18 22 ” |12,620 | 42 | 248|252 | 99 | 2.2| 19 20 ” | 7,480 | 34 | 156|150 | 79 | 1.3| 9.7 Cast-iron Muzzle-loaders. 16 ” Wrought-iron Tube | 4,540 | 46 | | 65 | 33 | | 2.3 16 ” | 1,287 | | | 66 | 33 | | 3.3 Armstrong Breech-loader. 12 ” | | | | 35 | | | 2.6 Bronze Breech-loader. 7.5 ” | 477.4| | | 8 | 9 | | .5 Bronze Muzzle-loaders. 8 ” | 587.4| | | 9 | 9.25| | .7 8 ” | 176 | | | 9 | 4.4| | .7 Cast-iron Muzzle-loader. 12 ” | 550 | | | 26 | 22.6| | 3.1 -------------------------+--------+----+-----+----+-----+-----+----- D = Chilled. E = Common. F = Ordinary. G = Saluting. -------------------------+----------------------- NAME, NATURE, AND | POWDER CHARGE. CLASSIFICATION. |-----+------+----+----- | D | E | F | G -------------------------+-----+------+----+----- | Lbs.| Lbs. |Lbs.| Lbs. Armstrong pattern | | | | Muzzle-loaders. 43 cm. | 471 | | | 28 ” New Model | 95 | 95 | 66 | 28 ” Old ” | 95 | 95 | 66 | 25 ” No. 1 Long | 77 | 77 | 53 | 25 ” ” Short | 77 | 77 | 53 | 25 ” No. 2 | 64 | 64 | 42 | 22 ” | 60 | 60 | 37 | 20 ” | 44 | 44 | 24 | Cast-iron Muzzle-loaders. 16 ” Wrought-iron Tube | 20 | 20 | 7 | 8 16 ” | | 7.7 | | 8 Armstrong Breech-loader. 12 ” | | 5.5 | | 2.2 Bronze Breech-loader. 7.5 ” | | 1.5 | | 1.4 Bronze Muzzle-loaders. 8 ” | | 1.2 | | 1.2 8 ” | | .7 | | 1 Cast-iron Muzzle-loader. 12 ” | | 3.3 | | 2.2 -------------------------+-----+------+----+----- A = Chilled. B = Common. C = Penetration. -------------------------+---------------+-----------------+------ NAME, NATURE, AND | Initial | Working Effect. | CLASSIFICATION. | Velocity. | | +-------+-------+--------+--------+ | A | B | A | B | C | | | | | -------------------------+-------+-------+--------+--------+------ | Ft. | Ft. |Ft.Tons.|Ft.Tons.| In. Armstrong pattern Muzzle-loaders. 43 cm. | 1,584 | | 34,550 | | 22.8 28 ” New Model | 1,312 | 1,312 | 6,300 | 6,300 | 12.1 28 ” Old ” | 1,312 | 1,312 | 6,262 | 6,330 | 12.1 25 ” No. 1 Long | 1,410 | 1,399 | 5,369 | 5,390 | 11.7 25 ” ” Short | 1,410 | 1,399 | 5,369 | 5,390 | 11.7 25 ” No. 2 | 1,410 | 1,420 | 3,952 | 3,970 | 10 22 ” | 1,476 | 1,476 | 3,731 | 3,790 | 10.3 20 ” | 1,476 | 1,509 | 2,345 | 2,345 | 8.7 Cast-iron Muzzle-loaders. 16 ” Wrought-iron Tube | | 1,525 | | 1,066 | 16 ” | | 1,026 | | 483 | Armstrong Breech-loader. 12 ” | | 1,368 | | 457 | Bronze Breech-loader. 7.5 ” | | 1,312 | | 97.5| Bronze Muzzle-loaders. 8 ” | | 1,040 | | 63.4| 8 ” | | 764 | | 33.8| Cast-iron Muzzle-loader. 12 ” | | 1,095 | | 12 | -------------------------+-------+-------+--------+--------+------ The standard Italian naval ordnance is the Armstrong muzzle-loader. There are some batteries of breech-loaders of the French type, and now that the Armstrong 100-ton gun has become a part of the standard ordnance, the government have ordered them made breech-loading with the Armstrong breech mechanism. The guns are to be provided with arrangements for both breech and muzzle loading. With the breech-loading, as the block is turned to unlock it, a grip on the end of a hydraulic piston in rear takes in a slot in the block, and when the latter is unlocked, a movement of the piston to the rear withdraws it from the gun to a small car having a transverse motion by which the block is carried sideways so as to unmask the bore. An iron cylinder is then inserted and pushed up to the rear of the powder-chamber as a loading-plate, guarding the screw-threads from injury. The charge, being raised by a hydraulic press in the usual manner, is forced home by a hydraulic rammer, and the breech-block is closed by its car and piston. The Gatling gun is used, and there has been an attempt to introduce the Albertini machine-gun, which is used in the army. Although of native manufacture, it has not as yet been received with much favor, being still too complicated in its mechanism, although the instrument is not as yet perfected. GREEK ORDNANCE. The armament of the Greek Navy is exclusively of Armstrong muzzle-loaders. DUTCH ORDNANCE. The standard naval ordnance of Holland is at present the Krupp type. Many of their vessels have batteries of Armstrong muzzle-loaders, and there are a few Finspong guns. The Hotchkiss machine-gun has been adopted for torpedo defence. (See page 305.) JAPANESE ORDNANCE. The standard Japanese naval ordnance is the Krupp. There are a few batteries of Armstrong muzzle-loaders, but none are now purchased. SWEDISH ORDNANCE. A = Calibre. B = Over all. C = Rifled Bore. D = Powder Chamber. E = Number of Grooves. F = Twist of Rifling. G = Gun complete, including Breech-block. H = Breech-block. ------------------+-----+-----------------+----+-----+------------ NAME, NATURE, AND| | LENGTH. | | | WEIGHT. CLASSIFICATION. | +----+------+-----+ | +--------+---- | A | B | C | D | E | F | G | H -----------------+-----+----+------+-----+----+-----+--------+---- | In. | In.| In. | In. | | Cal.| Lbs. | Lbs. Rifled Breech-loaders, cast-iron with steel hoops. 27 cm. | 10.8| 210| 162 | 30.3| 5 | 29.2 | 52,088| 770 24 ” | 9.4| 179| 133 | 26.6| 5 | 29.3 | 31,800| 528 16 ” | 6.6| 135| 89.5| 16.8| 5 | 29.8 | 12,000| 170 Cast-iron Muzzle-loader, Rifle. 12 ” | 4.6| 102| 97 | 13.6| 4 | 40 | 4,200| Cast-iron Smooth-bores. 15 in | 15 | 146| | | | | 43,000| 9 ” | 9 | 158| | | | | 38,000| ------------------+-----+----+------+-----+----+------+-------+----- NORWEGIAN ORDNANCE. ------------------+-----+----+------+-----+----+------+-------+----- Armstrong Muzzle-loaders. 27 cm. | 10.5| 162| 110.6| 20.5| 8 | 55 | 40,500| 27 ” | 10.5| 176| 120 | 25 | 8 | 55 | 43,400| 27 ” | 10.5| 206| | | | | 47,700| 20 ” | 8 | 130| 85.7 | 18.8| 6 | 50 | 16,700| Palliser Muzzle-loaders. 16 ” | 6.6| 139| 85.7 | 18.5| 3 | 34.1 | 11,000| 15 ” | 6.1| 123| 93.2 | 10.8| 3 | 34.1 | 7,700| Krupp Breech-loaders. 26 ” | 10.2| 225| 160.5| 34 | 60 | 45 | 48,400|1,960 15 ” | 5.9| 152| 112 | 22.6| 36 | 45 | 8,800| 304 ------------------+-----+----+------+-----+----+------+-------+----- A = Preponderance. B = Upper Carriage. C = Slide. D = Height of Axis of Gun above Deck-level. E = Chilled. F = Common. SWEDISH ORDNANCE ------------------+-----+------------------+------------------------ NAME, NATURE, AND| |CARRIAGE. | PROJECTILES. CLASSIFICATION. | +------+------+----+------------+----------- | | | | | Complete | Bursting | | | | | Weight. | Charge. | | | | +-----+------+-----+----- | A | B | C | D | E | F | E | F ------------------+-----+------+------+----+-----+------+-----+----- | Lbs.| Lbs. | Lbs. | In.| Lbs.| Lbs. | Lbs.| Lbs. Rifled Breech-loaders, cast-iron with steel hoops. 27 cm. | 127 |23,076|23,076| 49 | 475 | 396 | | 23.2 24 ” | 220 | 5,370| | 45 | 317 | 220 | | 9.3 16 ” | 403 | 2,105| 2,200| 40 | 107 | 76.5| | 3.7 Cast-iron Muzzle-loader, Rifle. 12 ” | 85 | 2,105| 900| 41 | 34 | | | 2.2 Cast-iron Smooth-bores. 15 in. | 253 | | | 31 | 430 | 340 | | 14 9 ” | 53 | | | 31 | 150 | 112 | | 5.8 ------------------+-----+------+------+----+-----+------+-----+----- NORWEGIAN ORDNANCE ------------------+-----+------+------+----+-----+------+-----+----- Armstrong Muzzle-loaders. 27 cm. |1,340| 6,720| | 28 | 385 | 308 | 6 | 21 27 ” | 440| 7,600| 8,000| 38 | 385 | 308 | 6 | 21 27 ” | 403| | | | | | | 20 ” | 761| 7,000| 7,000| 39 | 149 | 149 | 1.76| 10.1 Palliser Muzzle-loaders. 16 ” | 246| 1,880| 2,150| 43 | | 82.5| | 3.3 15 ” | 246| 1,000| 2,300| 43 | | 58 | | 3 Krupp Breech-loaders. 26 ” | 756|20,608|20,608| 52 | 462 | 380 |59.4 | 21 15 ” | 160| 5,600| 5,600| 41 | 86 | 70 | 1.1 | 5 ------------------+-----+------+------+----+-----+------+-----+----- A = Chilled. B = Common. C = Penetration. SWEDISH ORDNANCE ---------------+---------+-----------+---------------+-----+--------- NAME, NATURE, | Powder | Initial | Working | | Remarks. AND | Charge.| Velocity. | Effect. | | CLASSIFICATION.+----+----+-----+-----+-------+-------+ | | A | B | A | B | A | B | C | ---------------+----+----+-----+-----+-------+-------+-----+--------- |Lbs.|Lbs.|Feet.|Feet.|Ft Tons|Ft Tons|In. | Rifled Breech-loaders, cast-iron with steel hoops. 27 cm. |98 |66 |1,364| | 6,153 | |12 | 24 ” |59.4|37.4|1,322|1,476| 3,763 | 3,333 |10 |Finspong 16 ” |23.3|17.6|1,377|1,591| 1,414 | 1,347 |7.36|Rifles. ---------------+----+----+-----+-----+-------+--------+----+--------- Cast-iron Muzzle-loader, Rifle. 12 ” | 6.5| 4.4| |1,456| | 509 | | Cast-iron Smooth-bores. 15 in. |50.1|35 |1,213| | | | | 9 ” |24.8|17.6| | | | | | ---------------+----+----+-----+-----+-------+--------+----+--------- NORWEGIAN ORDNANCE ---------------+----+----+-----+-----+-------+--------+----+--------- Armstrong Muzzle-loaders. 27 cm. |66 |38.5|1,302|1,148| 4,541 | 3,156 |10.5| 27 ” |71.5|38.5|1,371|1,148| 5,032 | 3,156 |11 | 27 ” | | | | | | | | 20 ” |29.7|19.8|1,364|1,148| 1,938 | 1,360 | 7.9| Palliser Muzzle-loaders. 16 ” |22 |11 | |1,138| | 742 | 7.1| 15 ” | | 7.1| |1,115| | 404 | | Krupp Breech-loaders. 26 ” |99 |81.4|1,584|1,584| 7,933 | 6,644 |14 | 15 ” |18.7|18.7|1,590|1,640| 1,528 | | 8 | ---------------+----+----+-----+-----+-------+--------+----+--------- The Norwegian ordnance is both smooth-bore and rifled, the smooth-bore guns being of the Rodman (see page 283) and the rifles of the Krupp style. The Swedes manufacture their own breech-loaders, having chosen for their standard the French type of cast-iron body reinforced by steel hoops. These guns, known as the Finspong breech-loaders, have proved very satisfactory, the Swedish cast-iron being second only to American in excellence. The breech-blocks and steel hoops for these guns are all made in France. Two types of machine-guns, which have found general favor in Europe, are of Swedish invention. _The Nordenfeldt Machine-Gun._ This gun, which has been experimented with in the English Navy, is intended as a defence against torpedo-boats. It has four barrels placed in line, having a calibre of one inch, to fire a half-pound steel projectile. The projectiles are placed in guides behind the rear of the barrels, and by the movement of a lever are sent into the chamber, fired, and the empty shell extracted. Gearing worked by hand-wheels gives elevation and direction. The fire is rapid from this gun, and the results have been excellent for penetration. Weight of the gun complete, about 1000 pounds. [Illustration] _The Palmcrantz Machine-Gun._ The Palmcrantz mitrailleuse is a machine-gun for firing small-arm ammunition. It has ten barrels placed side by side and secured in a frame, the rear ends of the barrels being screwed into a single bar-transom, behind which the lock mechanism is placed in a flat rectangular box. The system is mounted on a swivel in such a manner as to give it free motion for elevating and depressing or sweeping. An eccentric cam attached to the crank-axle can be thrown into gear, by means of which the barrels are given an automatic sweep through a small arc. The whole gun is compact and light. Each barrel has a separate feeder, so that the velocity of discharge is very great, the barrels being fired in succession. RUSSIAN ORDNANCE. A = Calibre. B = Length over all. C = Number of Grooves. D = Twist of Rifling. E = Weight of Gun, including Breech-block. F = Preponderance. -----------------+------+-------+----+----+--------+------- NAME, NATURE, AND| | | | | | CLASSIFICATION. | A | B | C | D | E | F -----------------+------+-------+----+----+--------+------- | In. | In. | |Cal.| Lbs. | Lbs. Krupp Russian pattern steel Breech-loaders. Finished. | | | | | | 12 in. | 12 | 240.8 | 36 | | 89,173 | 1,958 11 ” | 11 | 219 | 36 | 70 | 57,280 | 0 9 ” | 9 | 180 | 32 | 60 | 33,150 | 440 9 ” | 9 | 156 | 32 | 60 | 29,920 | 748 8 ” | 8 | 175 | 30 | 60 | 19,820 | 440 Unfinished. | | | | | | 6 ” | 6 | 140 | 24 | 45 | 9,370 | 352 8 ” | 8 | 175 | 30 | 60 | 17,570 | 792 6 ” | 6 | 146 | 24 | 45 | 10,090 | 1,078 9 pdr. | 4.2 | | 16 | | 1,738 | 4 ” | 3.4 | 70 | 12 | 40 | 792 | 88 Bronze Rifled Muzzle-loaders. 8 pdr. | 4 | | | | 1,650 | 4 ” | 3.4 | | | | 809 | +------+-------+----+----+--------+------- 4 ” | 3.4 | | | | 865 | | | | | | | -----------------+------+-------+----+----+--------+------- American pattern cast-iron Smooth-bore Muzzle-loaders. 20 in. | 20 | | | | 96,360 | 15 ” new | 15 | 180 | | | 72,160 | 0 15 ” old | 15 | 170 | | | 43,340 | 1,078 10¾ ” | 10.75| 168 | | | 26,180 | 1,333 60 pdr. No. 1 | 7.6 | 135 | | | 10,780 | 792 60 ” ” 2 | 7.6 | | | | 7,040 | 36 ” ” 1 | 6.8 | | | | 7,040 | 36 ” ” 2 | 6.8 | | | | 5,610 | 36 ” ” 3 | 6.8 | | | | 4,590 | 36 ” ” 4 | 6.8 | | | | 4,240 | 30 ” ” 1 | 6.4 | | | | 6,864 | 30 ” ” 2 | 6.4 | | | | 5,214 | 30 ” ” 3 | 6.4 | | | | 4,330 | 30 ” ” 4 | 6.4 | | | | 1,770 | -----------------+------+-------+----+----+--------+------- G = Weight of Upper Carriage. H = Steel. I = Chilled. J = Common. -----------------+--------+--------------------------- NAME, NATURE, AND| | PROJECTILES. CLASSIFICATION. | +--------------------------- | | Complete Weight. | +------+------+------------- | G | H | I | J -----------------+--------+------+------+------------- | Lbs. | Lbs. | Lbs. | Lbs. Krupp Russian pattern steel Breech-loaders. Finished. | | | | 12 in. | | 649 | | 644 11 ” | 10,604 | 495 | 462 | 439 9 ” | | 270 | 264 | 267 9 ” | | 270 | 264 | 267 8 ” | 4,686 | 180 | 191 | 172 Unfinished. | | | | 6 ” | 3,508 | 96 | 85.4| 84 8 ” | 4,868 | 180 | 191 | 182 6 ” | 3,322 | 96 | 85.4| 84 9 pdr. | 693 | | | 24 4 ” | 739 | | | 14 Bronze Rifled Muzzle-loaders. 8 pdr. | 666 | | | 26 4 ” | 603 | | | 11.5 +--------+------+------+------------- 4 ” | 603 | Cast-iron | 13.5 | | Round Shot. | -----------------+--------+------+------+------------- American pattern cast-iron Smooth-bore Muzzle-loaders. 20 in. | | 1,000| 1,000| 15 ” new | | 440| 440| 373 15 ” old | 6,270 | 440| 440| 373 10¾ ” | | 160| 160| 60 pdr. No. 1 | 2,220 | 57.7| 57.7| 43 60 ” ” 2 | 1,518 | 57.7| 57.7| 43 36 ” ” 1 | 1,518 | 40 | 40| 29 36 ” ” 2 | 1,210 | 40 | 40| 29 36 ” ” 3 | 990 | 40 | 40| 29 36 ” ” 4 | 790 | 40 | 40| 29 30 ” ” 1 | 1,408 | 32 | 32| 26 30 ” ” 2 | 1,188 | 32 | 32| 26 30 ” ” 3 | 1,528 | 32 | 32| 26 30 ” ” 4 | | 32 | 32| 26 -----------------+--------+------+------+------------- A = Steel. B = Chilled. C = Common. D = For Steel and Chilled Shot. E = Common Shells. F = Ordinary. G = Saluting. ----------------+-----------------+-------------------- | PROJECTILES. | POWDER CHARGE. NAME, NATURE, +-----------------+-----+----+----+---- AND | Bursting Charge.| | | | CLASSIFICATION.+----+-----+------+ | | | | A | B | C | D | E | F | G ---------------+----+-----+------+-----+----+----+---- |Lbs.| Lbs.| Lbs. |Lbs. |Lbs.|Lbs.|Lbs. Krupp Russian pattern steel Breech-loaders. | | Finished. 12 in. | | | 16 |121 | |58.5| 11 ” | 12 | 7 | 13.5 | 82.5| |41.2|9 9 ” | 7 | 4.5 | 9.5 | 47 | |23.4|7.2 9 ” | 7 | 4.5 | 9.5 | 43 | |23.4|7.2 8 ” | 5 | 2 | 6.2 | 28.5| |14.2|7.2 Unfinished. 6 ” | | 1.8 | 3 | 18 | |10.8|4.5 8 ” | 5 | 2 | 6 | 22.5| |14.2|7.2 6 ” | | 1.8 | 3 | 14.4| |10.8|4.5 9 pdr | | | 1 | | 2.7| 2.5|2.7 4 ” | | | .5 | | 1.5| 1.5|1.5 Bronze Rifled Muzzle-loaders. 8 pdr. | | | 1.5 | | 3.6| 3.6|3.6 4 ” | | | .8 | | 1.5| 1.5|1.5 ----------------+----+-----+------+-----+----+----+---- 4 ” | | | 1 |Cast | 2 | 1.8|1.8 | | | |iron | | | | | | |Round| | | | | | |Shot.| | | ----------------+----+-----+------+-----+----+----+---- American pattern cast-iron Smooth-bore Muzzle-loaders. 20 in. | | | |117 | | | 15 ” new | | | 10.75| 67.5| 45 |27 |9 15 ” old | | | 10.75| 67.5| 45 |27 |9 10¾ ” | | | | 36 | | |9 60 pdr. No. 1 | | | 1.8 | 14.5| |10 |4.5 60 ” ” 2 | | | 1.8 | 10.8| | 2.6|4.5 36 ” ” 1 | | | 1 | 8 | | 2 |3.6 36 ” ” 2 | | | 1 | 8 | | 2 |3.6 36 ” ” 3 | | | 1 | 6.2| | 1.6|8.6 36 ” ” 4 | | | 1 | 5.5| | 1.4|8.6 30 ” ” 1 | | | .8 | 9 | | 2.3|2.7 30 ” ” 2 | | | .8 | 6.7| | 1.7|2.7 30 ” ” 3 | | | .8 | 5 | | 1.2|2.7 30 ” ” 4 | | | .8 | 3.5| | .9|2.7 ----------------+----+-----+------+-----+----+----+---- A = Steel. H = Working Effect. I = Penetration. ----------------+---------+---------+----- NAME, NATURE, | INITIAL | | AND |VELOCITY.| | CLASSIFICATION.+---------+ | | | | | | | | A | H | I | | | ----------------+---------+---------+----- | Feet. |Ft. Tons.| In. Krupp Russian pattern steel Breech-loaders. Finished. 12 in. | 1,446 | 9,408 | 14.1 11 ” | 1,205 | 5,844 | 11.6 9 ” | 1,341 | 3,365 | 9.8 9 ” | 1,276 | 3,043 | 9.3 8 ” | 1,404 | 2,463 | 9.0 Unfinished. 6 ” | 1,335 | 1,188 | 7.1 8 ” | 1,246 | 1,938 | 7.8 6 ” | 1,207 | 972 | 6.4 9 pdr | Common | 183 | | 1,049 | | 4 ” | Common | 96 | | 1,003 | | Bronze Rifled Muzzle-loaders. 8 pdr. | | | 4 ” | Common | 77 | | 1,000 | | ----------------+---------+---------+----- 4 ” | | | ----------------+---------+---------+----- American pattern cast-iron Smooth-bore Muzzle-loaders. 20 in. | 1,118 | 8,581 | 15 ” new | 1,184 | 4,263 | 15 ” old | 971 | 2,872 | 10¾ ” | | | 60 pdr. No. 1 | | | 60 ” ” 2 | | | 36 ” ” 1 | | | 36 ” ” 2 | | | 36 ” ” 3 | | | 36 ” ” 4 | | | 30 ” ” 1 | | | 30 ” ” 2 | | | 30 ” ” 3 | | | 30 ” ” 4 | | | ----------------+---------+---------+----- The standard type of Russian ordnance is the Krupp breech-loader, manufactured in their own workshops, and slightly modified in some few details of guns and carriages. Some of their monitors are armed with the Rodman type of 15-inch smooth-bore. During the first period of the development of rifled guns the Russians adopted the Armstrong muzzle-loader, and shortly afterward they passed to the French breech-loader, there being still several armaments of these types in the wooden fleet; but all types have been superseded by the Krupp. The circular iron-clads having their guns firing _en barbette_, are worked on depressing carriages of Russian invention. _The Razkazoff Depression-Carriage._ This carriage consists of a heavy bed-plate, at the forward end of which is a heavy solid axle forming a turning-point for two solid cast arms, the upper ends of which form seats for the trunnions. Connected to these arms are the piston-rods of hydraulic recoil cylinders. The breech of the gun is supported by auxiliary arms, the bottom rests of which are mounted on screws in such a manner that they may be traversed through short lengths, thus elevating or depressing the gun. When the gun is down in its loading position these arms may be freely traversed, and the desired elevation be thus attained before raising the gun for firing. Both the Palmcrantz and the Hotchkiss machine-guns are used. [Illustration] PERUVIAN ORDNANCE. The naval ordnance of Peru consists of a few smooth-bores of the Rodman type and some Armstrong muzzle-loaders of the original type. They also have two or three Whitworth muzzle-loaders. The machine-guns are Gatlings. PORTUGUESE ORDNANCE. The Portuguese Navy has a few Krupp breech-loaders, but the wooden fleet is for the greater part armed with Armstrong muzzle-loaders. SPANISH ORDNANCE. The greater part of the Spanish fleet is armed with Armstrong muzzle-loaders, but medium-calibred steel guns of the French type are now manufactured in their own government workshops, some of which have been introduced into the navy, and it is supposed that at least for medium calibres this type will be the standard. There are some Krupp armaments, but these are exceptional. The Gatling machine-gun is used. TURKISH ORDNANCE. The greater part of the ordnance of the Turkish fleet is of the Armstrong muzzle-loading pattern, although there is a preference for Krupp armaments, which are used to replace the original type of Armstrong guns. The Gatling machine-gun is used. EUROPEAN SYSTEMS. Of the breech-loading systems of Europe there are at present but two distinct types in use—the French and the Krupp—the latter being the one at present most fully represented, it being the standard ordnance of Germany, Russia, Austria, Denmark, and Holland. The French type is the standard of France, Spain, Sweden, and, as may now be claimed, Italy. Armstrong, whose artillery is almost as fully represented as Krupp’s, has adopted the French type, and this will in all probability make this type the standard in those countries who purchase guns instead of manufacturing them. The muzzle-loading types were abolished by all the manufacturing nations of Europe except England by 1864, although the prestige of Armstrong’s ordnance has kept up the supply to the smaller nations to the present time. This ordnance has been steadily growing in disfavor, and the latest development in rifled ordnance (enlarging the powder-chamber) will probably lead to its disuse. UNITED STATES ORDNANCE. A = Length of Bore. B = Calibre. C = Number of Grooves. D = Twist of Rifling. E = Weight. ----------------------+-------------------------------------- NAME, NATURE, AND | GUN. CLASSIFICATION. +-------+------+------+------+--------- | A | B | C | D | E ----------------------+-------+------+------+------+--------- | In. | In. | | Feet.| Lbs. Muzzle-loading Rifles. 8-inch converted | 136 | 8 | 15 | 40 | 17,350 100-pdr. Parrott | 130 | 6.4 | 9 | 0/19 | 9,700 60-pdr. ” | 105 | 5.3 | 7 | 0/15 | 5,400 30-pdr. ” | | 4.2 | 5 | 0/12 | 3,550 20-pdr. ” | | 3.7 | 5 | 0/10 | 1,750 20-pdr. Dahlgren | 65.6 | 4 | 3 | 12½ | 1,350 12-pdr. bronze | 55 | 3.4 | 3 | 10 | 880 ----------------------+-------+------+------+------+--------- Breech-loading Rifles. 80-pdr. converted | | 6.4 | 9 | 0/19 | 10,166 60-pdr. ” | | 5.3 | 7 | 0/15 | 5,270 30-pdr. ” | | 4.2 | 5 | 0/12 | 3,428 +-------+------+------+------+--------- 20-pdr. bronze, | | 4 | 6 | 12½ | 1,340 converted | | | | | +-------+------+------+------+--------- 20-pdr. converted | | 3.7 | 5 | 0/10 | 1,740 7-pdr. bronze, | | 3 | 16 | 7½ | 500 heavy | | | | | +-------+------+------+------+--------- 7-pdr. ” light | | 3 | 16 | 7½ | 350 ----------------------+-------+------+------+------+--------- | Weight of | | Shot. | | Lbs. | ----------------------+-------+------+-------------+--------- Smooth-bores. 15-inch | 146 | 15 | 450 | 43,000 11-inch | 131 | 11 | 166 | 16,000 9-inch | 107 | 9 | 90 | 9,000 8-inch | 96 | 8 | 65 | 6,500 32-pdr | 92 | 6.4 | 32.5 | 4,500 ----------------------+-------+------+-------------+--------- 24-pdr. bronze | 58 | 5.8 | | 1,310 | | | Shell | 12-pdr. ” heavy | 55 | 4.6 | Guns. | 760 12-pdr. ” light | 50 | 4.6 | | 430 ----------------------+-------+------+-------------+--------- F = Weight of Carriage. G = Weight of Slide. ------------------------------+-------+---------------- NAME, NATURE, AND | | CLASSIFICATION. | | | F | G ------------------------------+-------+---------------- | Lbs. | Lbs. Muzzle-loading Rifles. 8-inch converted | 3,790 | 3,710 100-pdr. Parrott | 1,300 | Directing Bar 60-pdr. ” | 1,970 | ” 30-pdr. ” | 1,970 | ” 20-pdr. ” | 802 | ” 20-pdr. Dahlgren | 802 | ” 12-pdr. bronze | 482 | Boat Carriage ------------------------------+-------+---------------- Breech-loading Rifles. 80-pdr. converted | 1,300 | Directing Bar 60-pdr. ” | 1,970 | ” 30-pdr. ” | 1,970 | ” 20-pdr. bronze, converted | 832 | Boat Carriage 20-pdr. converted | 826 | ” 7-pdr. bronze, heavy | 535 | ” 7-pdr. ” light | 450 | ” ------------------------------+-------+---------------- Smooth-bores. 15-inch |18,000 | Turret Carriage 11-inch | 3,790 | 3,710 9-inch | 1,300 | Marsilly 8-inch | 860 | ” 32-pdr. | 735 | ” ------------------------------+-------+---------------- 24-pdr. bronze | 730 | ” | Boat | Field 12-pdr. ” heavy | 482 | 487 12-pdr. ” light | 233 | 381 ------------------------------+-------+---------------- A = Weight of Shell. B = Charge of Powder in Shell. C = Powder Charge. D = Initial Velocity. E = Muzzle Energy. ----------------------------+-----+---------+-----+------+---------- NAME, NATURE, AND | A | B | C | D | E CLASSIFICATION. | | | | | ----------------------------+-----+---------+-----+------+---------- | Lbs.|Lbs. Ozs.| Lbs.| Feet.|Foot Tons. Muzzle-loading Rifles. 8-inch converted | 180 | 10 0 | 35 | 1,450| 2,627 100-pdr. Parrott | 100 | 3 11 | 15 | 1,080| 810 60-pdr. ” | 48 | 2 2 | 6 | 1,320| 30-pdr. ” | 29 | 1 8 | 3¼| | 20-pdr. ” | 18 | 0 13 | 2 | | 20-pdr. Dahlgren | 18 | 1 0 | 2 | | 12-pdr. bronze | 12 | 0 8 | 1 | | Breech-loading Rifles. 80-pdr. converted | 80 | 3 11 | 15 | 1,250| 60-pdr. ” | 50 | | 6 | | 30-pdr. ” | 30 | | 3½| | 20-pdr. bronze, converted| 18 | 0 8 | 2 | | 20-pdr. converted | 20 | | 2 | 1,070| 7-pdr. bronze, heavy | 7 | | 1 | 1,087| 63 7-pdr. bronze, light | 7 | | ¾| 1,087| 63 Smooth-bores. 15-inch | 352 | 13 0 | 100 | 1,600| 7,997 11-inch | 136 | 6 0 | 30 | 1,062| 1,300 9-inch | 74 | 3 0 | 18 | 1,820| 847 8-inch | 58 | 1 11 | 7 | | 32-pdr. | 27 | 0 14 | 6 | | 24-pdr. bronze | 23 | 1 0 | 2 | | 12-pdr. ” heavy | 12 | 1 0 | 1 | | 12-pdr. ” light | 12 | 1 0 | ½| | ----------------------------+-----+---------+-----+------+---------- GUNS. In the United States Navy both smooth-bores and rifles are used, and of the latter both muzzle and breech-loaders. _Smooth-Bores._ [Illustration: 15-inch Rodman Gun (Smooth-Bore).] [Illustration: 9-inch Dahlgren (Smooth-Bore).] The smooth-bore guns used form a complete range of calibres from the 15-inch to the 6½-inch. The turret-guns, which are exclusively of the 15-inch pattern, are of the Rodman type of construction, of cast-iron, being cast on a core and cooled from the interior. The exterior surface shows no sharp angles and no muzzle-ring, the general shape being that of a bottle with a rounded base. The chamber of the gun is of two types, cylindrical and conical, in accordance with different dates of fabrication. The 11-inch guns are used exclusively for pivot-guns of first and second class corvettes, and it is this calibre that is being converted into 8-inch rifles, the intention being to so transform all of this type. These guns are of the Dahlgren type of construction, being similar in shape to the 15-inch (with the exception of having a swell at the muzzle), but _solid_ cast. These guns all have conical chambers. The 9 and 8 inch and 32-pdr. are broadside-guns, and are similar in construction to the 11-inch. The 24-pdr. and two classes of 12-pdrs. are of bronze, having a conical exterior surface. These guns are used as light upper-deck guns and boat-guns. [Illustration: 12-pdr. Bronze (Smooth-Bore).] [Illustration: 100-pdr. Parrott M. L. R.] [Illustration: 20-pdr. Bronze M. L. R.] [Illustration: 12-pdr. Bronze M. L. R.] _Rifled Guns._ The muzzle-loading rifled guns are of three patterns. 1st. The 8-inch converted. These guns are all converted from the 11-inch smooth-bore on the Palliser system (see page 217), the length of bore being slightly increased by cutting back at the breech. 2d. The Parrott type, a compound gun consisting of a cast-iron body with a coiled wrought-iron hoop over the powder-chamber. These guns were introduced into the service in 1860, contemporaneously with the first development of rifled guns in Europe. As early as 1862, guns of this type with a calibre of eight inches were in active service, being at that time as powerful as any guns in the world. The 8-inch calibre has never been extensively used in the service, and is at present obsolete. 3d. The Dahlgren type of bronze muzzle-loaders. The 20-pdr. gun of this type is similar in shape to the general smooth-bore type, slightly modified. The light calibres are similar to their corresponding smooth-bores. [Illustration: 8-inch Converted M. L. R.] _Breech-Loaders._ [Illustration] [Illustration: 3-inch Boat-Gun (R. B. L.).] The breech-loaders with the exception of the bronze and steel boat-guns are as yet entirely converted from the muzzle-loaders of the Parrott type. In this conversion, the coiled hoop is removed, the cascabel is cut off to the powder-chamber, and the rear end of the bore as far forward as the trunnion is reamed out for the insertion of a steel tube, having a heavy screw-thread at its rear end by which it is secured in the casing. The old rifling is then carried through this tube, leaving the calibre unchanged. The coiled hoop is replaced by another of similar type, but covering a longer space. The breech mechanism is of the French type, with Broadwell steel gas-check fixed in its seat in the gun. The breech-block is provided with a steel nose-plate of the diameter of the face of the block, and having a copper ring countersunk in its forward face to form a bearing surface against the rear of the gas-check. The nose-plate is secured to the block by a long tenon which passes through the axis of the block and is secured by a nut at the rear. The vent is bored axially through this tenon, and is of two types, corresponding to date of fabrication, for preventing back-fire. In the first, a small steel plate covers the forward end of the vent, being loosely secured, so that on firing the flame escapes past the edges of the plate, but the back pressure holds the plate close over the vent; the action being precisely similar to that of an ordinary valve. In the other type, the forward part of the vent is reduced in size until just large enough to give free passage to the flame, giving it a needle-point, which causes the flame to pierce well into the cartridge. The back pressure is neutralized in this manner, as it reacts before the forward flame pressure is relieved. It is intended to so modify the firing arrangement as to use percussion primers, the gun-lock forming the mask to the vent. The crank is double, there being a vertical arm having at its upper extremity a crank and a pinion working in a rack on the face of the breech. The swinging tray for the breech-block is hinged at the right side of the breech, while at the left side is hinged a loading-tray having a sliding guard on it. The projectile being placed on this guard and the tray swung around to face the bore, on pushing forward the projectile the guard also enters the breech-block seat, bringing up against the gas-check, and thus guarding both the check and the screw-threads. In the boat-guns there is no loading-tray, the remainder of the breech mechanism being of the same type. Boat-guns are both of steel and bronze, being in both cases made of a single block. [Illustration] _Grooves._ The grooves are of two types. Those for the Parrott and converted guns are of the plain rectangular type, the rule for their number and size being that they shall be uneven in number to bring a land opposite a groove; lands and grooves shall be equal in width, and grooves for all calibres shall be the same depth—¹/₁₀₀ of an inch. Increasing twist. The Dahlgren type of groove is similar to the modified French groove (see plate, page 187), there being three only of a regular twist. These grooves are found only in the Dahlgren muzzle-loading bronze boat-guns. [Illustration: Parrott Groove.] [Illustration: Dahlgren Groove.] CARRIAGES. Naval gun-carriages are built of plate-iron, although there are still a few wooden carriages and slides for pivot-guns. Breechings are used with broadside-carriages, except in the directing-bar type. _Boat-Carriages._ As yet the designs for an iron boat-carriage for the breech-loading gun are not finished. The wooden carriage in use consists of a double wooden slide, the bed, or lower slide, having pivot-centres in front and rear and being slotted through the centre for the compressor. The upper slide traverses freely on the lower one, having a piece projecting from its lower face into the slot in the lower slide to act as a guide. A second heavy piece, used as a compressor, travels along the lower face of the slot, and is held in position by screw-handles working on threaded shafts which are tightened or loosened readily by hand. The upper slide holds the trunnion-rests, which are made in a single casting with a bottom plate to bolt on the slide. [Illustration: Wooden Boat-Carriage.] _Field-Carriages._ [Illustration] [Illustration] The field-carriages are of two types, both of iron. That for the muzzle-loader consists of a single bar to which the axle is bolted and stayed. To its lower end is bolted an iron box for a trail-wheel and a socket for a directing handspike. A small seat for the elevating-screw is bolted at its middle on top, and at the forward end is a light iron frame for holding two ammunition-boxes. The field-carriage for the breech-loader consists of two plate-iron brackets connected by the axle and three transoms. The lower part expands into a box for the trail-wheel, and the end is finished in a loop for a drag-rope. At the forward end is a lug for attaching a caisson, and a frame on the axle outside of the brackets on each side for ammunition-boxes. The elevating-screw works in a pivoting screw-box. It will be noticed that the breech-loader has trunnions, while the muzzle-loader has only a lug, making the forward ends of the two carriages different in construction. [Illustration: Iron Field-Carriage for Muzzle-Loaders.] _Broadside Marsilly Carriage._ The Marsilly or rear-chock carriage is the type used with the broadside smooth-bore guns. It consists of two plate-iron brackets with a transom across the front ends and a bed-plate in the rear, giving a support for the elevating-screw, and being provided with two brass friction-shoes resting directly on deck. Holes are cut in the brackets to lighten them. A wooden breast-sweep is bolted to the transom, and there are four bolts for hooking tackles, one at each end and one at the rear of each bracket. This carriage differs from European ones in the point of not having the breeching attached to it; the latter is secured to the gun. _Broadside Directing-Bar Carriage._ [Illustration: Broadside Marsilly Carriage. (Elevation.)] [Illustration: Broadside Marsilly Carriage. (Plan.)] [Illustration: DIRECTING BAR CARRIAGE FOR 60 Pdr. (With Circular Brake Compressor.)] [Illustration] [Illustration] The directing-bar carriage is a broadside-carriage which combines the compactness of broadside types with the advantages of pivoting and checking recoil by friction instead of breechings. The top carriage is similar in type to the Marsilly, differing only in its attachments. Instead of using an elevating-screw (which with breech-loaders of medium calibre is unsafe), elevation is secured by geared racks. A rack is secured to each side of the gun and travels in guides in a similar manner on both sides; whilst, however, there is a clamp to each rack, there is but one hand-wheel for elevating, on the right side of the carriage. Just in rear of the truck-axle, a heavy axle is secured in the brackets, carrying on its centre a large cogged wheel, and just inside the left bracket a friction-drum with a gun-metal friction-band worked by a lever outside the bracket. The lever is held in any desired position by a rack, thus regulating compression. A stationary double block is secured to the transom, and a single bolt to the rear of the bed-plate, for convenience in hooking a tackle. The directing-bar consists of a long =I= iron having a pivot-centre near each extremity and eye-bolts at each end for hooking training-tackles. A treble block fixed at its forward end serves with the double block on the carriage for reeving an out-tackle. Along the centre of the bar a metal rack is bolted, in which the cogged wheel of the carriage travels. About three quarters of the distance to the rear are secured two railroad buffers, which may be shifted or removed at will. The carriage rests with its trucks and chocks on deck; when running in and out the chocks may be lifted from the deck on a roller handspike, and in shifting from one port or pivot to another the carriage may be run over one of the pivot-centres and then lifted with the bar entirely clear of the deck. _Iron Pivot-Carriage and Slide for 11-inch Smooth-Bore._ The carriage consists of two plate-iron brackets with one transom and two bottom plates connected by angle-irons to the brackets. The forward trucks are permanently in action, the rear ones being mounted on eccentric axles. At the rear of the brackets are loops for the in and out tackles, and secured to the rear bed-plate are loops for a preventer-breeching. Two projecting lips protrude from the forward bed-plate beyond the brackets, forming seats for a screw-compressor. The slide is made up of two heavy double =T= bars connected by bottom plates and rods. It is mounted on eccentric rollers, and both the forward and rear pivot-centres are in the bed-plates. The compressors (one on each side) are of the ordinary screw-press form, composed of a wrought-iron frame having a lip on its inner lower side which takes under the slide-bars, whilst a screw in the top of the frame seats on the projections of the carriage. This type of slide and carriage is going out of use. _Iron Pivot-Carriage with Central Recoil Check._ This carriage is the same in general principle as the ordinary pivot-carriage, the main modification being in the arrangement for checking recoil. A worm-shaft, attached to the transom of the carriage and worked by a hand-wheel outside the left bracket, gears in a large cogged wheel just outside the transom. This wheel has at the lower end of its axle a screw-sleeve operating a friction-plate which seats against two heavy bars secured to the slide. Railroad buffers are also fixed at each end of the slide. [Illustration: Central Recoil-Check Carriage.] _Geared Broadside-Carriage and Slide with Hydraulic Recoil Check._ The carriage is very low, its bottom plates coming down inside the slide-rails, which are given a slope to the front. The slide is centre-port pivoting. The carriage is run out and in either by tackles or gearing. For the latter, long screw-shafts are fixed outside of the slide-rails on each side, geared by mitre-gearing to large cogged driving-wheels on the rear of the slide. A long lever is pivoted in wake of the trunnion-sockets, carrying at its lower end a half screw-sleeve. By heaving out on the lever, the sleeve engages in the screw-shaft and the gun is drawn in or out. The recoil cylinder is of the ordinary type, but provided with a circulating pipe and balanced valve by which the oil passes from one end to the other. The valve may be regulated for any desired amount of recoil. The training-gear is of the ordinary type, working a longitudinal shaft having on its outer end a cogged wheel to gear in a metal rack just inside of the rear slide-rollers. _Ericsson’s Broadside-Carriage and Slide with Friction Recoil._[8] The recoil arrangement of this carriage is made up of two plates operated by a lever, and jamming between them a flat plate attached to the carriage. The carriage is run in and out by gearing, the driving-wheel engaging in racks inside the slide-rails. The training-gear is of the ordinary type, but gears directly into the slide-rollers, whose middle sections are cogged, the middle section of the circle or races being cut in a rack. [8] See page 299. [Illustration] [Illustration: Geared Carriage and Slide with Hydraulic Recoil.] _Ericsson’s Turret-Carriage._ The slide of the turret-carriage consists of two bars built into the turret. The carriage is made of double plate-iron worked on a frame. The compressor is the original of the Elswick compressor (see page 201), working on the same principle. The gun is run in and out by means of a large cogged driving-wheel gearing in a rack underneath the slide. [Illustration: Ericsson’s Turret-Carriage. (Top.)] [Illustration: Ericsson’s Turret-Carriage. (Bottom.)] _Friction-Drum Recoil-Check Carriage._ The carriage and slide are similar to those of the 11-inch iron pivot-carriage, except with regard to the recoil check, which is exactly the same in principle as that of the directing-bar carriage. [Illustration: Ericsson’s Friction Recoil Carriage.] GUNPOWDER. [Illustration: Cubical Powder.] [Illustration: Hexagonal Powder.] Gunpowder is classed in accordance with its size of grain as follows: Hexagonal | | not less than 70 nor more than 75 grains to the pound. Cubical | Mammoth ” ” 0.5 ” ” 1 inch measurement. Rifle ” ” 0.3 ” ” 0.5 ” ” Cannon ” ” 0.1 ” ” 0.3 ” ” Torpedo ” ” 0.1 ” ” .15 ” ” Small-arm ” ” 0.05 ” ” .06 ” ” Shell ” ” .02 ” ” .06 ” ” PROJECTILES. The projectiles used with both smooth-bores and rifles are shot, shell, shrapnel, and case-shot. All smooth-bore projectiles are of cast-iron. All rifle projectiles except the 8-inch shot are common cast-iron; the shot are chilled-headed. [Illustration: 100-pdr. Parrott-Shell.] [Illustration: 8-inch Shell.] [Illustration: 8-inch Shot.] [Illustration: 8-inch B. L. Shell.] Rifled projectiles for the boat-guns (B. L.) are provided with rotating grooved belts cast on them. They also have a rear centring ring. The rotating-rings for the larger calibres are brass rings screwing on the base of the projectile, and having an expansion groove or cup on the rear end. In the Parrott projectiles the ring is cast on the base around a heavy dovetailed score, having jogs to prevent the ring turning on the base of the shell. The shrapnel for the boat-guns is of the simplest description, having a thin shell and a central powder-chamber throughout its length. Shrapnel for the heavy calibres is similar to the English type. Case-shot is of the ordinary construction. [Illustration: 12-pdr. Smooth-Bore Shrapnel.] [Illustration: 3-inch B. L. Shrapnel.] [Illustration: Fixed Charge for Boat-Gun. (Shell and Cartridge.)] FUSES. [Illustration: Navy Time-Fuse.] The fuses used in the navy are both time and percussion. There are three types of time fuses. The navy time-fuse, used in rifled and smooth-bore projectiles, consists of a brass fuse-case pierced by a centre hole, the bottom of which is closed by a small leaden plug simply jammed into place, called a safety-plug. On the top of this is the column of fuse composition driven in a paper case. Over this screws a small metal plug, called a water-cap, having angular passages cut through it to prevent the passage of water to the flame. These holes are filled with igniting composition. Over the water-cap is secured a leaden patch, sealing the fuse. This patch is torn off when the projectile is put in the gun; the flame of discharge ignites the composition, and the projectile starting from its seat drives the safety-plug out of its place into the shell, leaving the passage clear for the flame. The Bormann fuse is used with the smooth-bore shrapnel. In this, the composition is driven in a horizontal cavity opening into a centre magazine. The top of the fuse is sealed, and its periphery marked to fractions of seconds. When inserting the projectile this fuse is cut, laying the composition bare at the desired time. [Illustration: Bormann Fuse.] [Illustration: Boxer Time-Fuse.] [Illustration: Schenkl Percussion Fuse.] The Boxer fuse is a wooden-cased fuse similar to its English original. There is but one type of percussion fuse used in the service. It consists of a brass case containing a small iron hollow cylinder filled with composition, and having at its head a small anvil on which an ordinary percussion-cap is fitted. This cylinder is suspended midway of the case by a small brass screw through the wall of the case. The top of the fuse is closed by a small screw-cap, one side of which is hollowed in a small cavity. Ordinarily this cap is screwed in place with the cavity turned downward, so that in case the cylinder breaks from its fastening the cap cannot be struck as it enters the cavity, while the shoulders bring it up before striking. To prepare it for firing, the cap is unscrewed and reversed, putting its flat side down. When the time-fuse is used in rifled shells, the safety-plug is removed before inserting the fuse. PRIMERS. Both percussion and friction primers are used. The percussion primer consists of a quill tube, the upper end of which is split and spread out to form a wafer. The body is filled with fine powder, the lower end being sealed with shellac, and the wafer is filled with detonating composition, covered and sealed with shellac. The friction primer is a quill tube filled with fine powder, and having in its head a wire igniter in contact with detonating composition. The end of the wire is twisted into a loop for the purpose of hooking a firing laniard. A small preventer-loop is attached to the primer, hooking over a small pin just forward of the vent. [Illustration: Percussion Primer.] [Illustration: Friction Primer.] LOCKS. Percussion-locks are used with all smooth-bores. They are of the ordinary type of heavy brass gun-locks, the pivot-hole being slotted so that in firing, after the lock strikes the primer it is drawn clear of the vent. SIGHTS. The smooth-bore broadside-guns are provided with centre-breech and reinforce sights, pivot-guns with centre and tangent sights, and the rifled guns with tangent-sights. The smooth-bore breech-sights are rectangular bars shipped with an angle to the rear so that two sides may be seen. These sights are marked on one side for ordinary and on the other for heavy charges, corresponding to shot and shell. The reinforce sights are of the ordinary pattern. The Parrott tangent-sight does not slide in a sight-box, but has a stem which seats in a casing. It is cylindrical, and the sight-notch, fixed to a ring, slides up and down the sight-bar. The sight-notch itself is a small capstan-head having four radial notches, and working on a screw perpendicularly to the sight-bar to allow for drift. The tangent-sight for the 8-inch M. L. R. is set at a permanent angle of deflection of 1° 50´, and is provided with a sliding leaf. The graduation on all sights except the Parrott rifles and the boat-guns is in hundreds of yards. In the remainder it is in fractions of degrees. MACHINE-GUNS. [Illustration: Hotchkiss Revolving Cannon.] This gun is introduced into naval services with the especial objects of, first, repelling torpedo and boarding attacks; second, for use against light merchant vessels where a light, long-range artillery fire is most effective. The gun has five barrels, and can be fired at a rate of from 60 to 80 shots per minute without forcing. Its ammunition is shell and case-shot, the weight of projectile ranging from one and a half pounds in the light calibre to four pounds in the heavy one. The extreme range is about 4500 yards. The barrels are assembled about and revolve around a central axis, the cartridges being fed through a chamber in the left upper side of the breech-casing. There is but one lock, and each barrel fires once during a revolution. The cartridge on falling into the chamber is carried forward by a cam into its barrel, being pushed close home and receiving good support when passing in front of the firing-pin. The latter is retracted by a cam, plunging forward as the centre of each cartridge comes in front of it. The rim of the cartridge-case is then seized by an independent extractor, withdrawn, and dropped to the ground. Although the crank is turned steadily, there is a certain amount of lost motion in the revolution of the barrels. This takes place as the cartridge reaches the firing-point, and during this short time of rest one cartridge is fired and another empty case is ejected. No elevating-screw is used with this gun. It is mounted on trunnions in a saddle, and projecting from the rear of the breech-case is a wooden shoulder-piece, while underneath is a handle to allow a support with the left hand. The cartridges are permanently attached to the rear of the projectiles. The shells are of steel with a percussion fuse. The barrels of the gun are made of Whitworth compressed steel of the finest quality. This gun has up to the present time proved the most effective torpedo-gun in existence. Its only rival at present is the Nordenfeldt gun, which is not yet thoroughly developed. [Illustration: Chamber. (Longitudinal Section.)] [Illustration: Chamber. (Vertical Section.)] _The Gatling Gun._ [Illustration: Long Pattern.] [Illustration: Short Pattern.] This gun, which has as yet been unequalled as a mitrailleuse, finds a place in the armament of nearly all the navies of the world. Hitherto the object of the gun in naval use has been simply to aid the small-arm fire whenever the latter was made necessary, but at present it is the design to increase the calibre of the gun so as to enable it to fire projectiles of two or more pounds. What modifications will be required in the present type of gun are not as yet known; but although the Gatling and Hotchkiss guns are both American inventions, they must not in their present stages of development be considered as rivals. The Gatling is as a rule confined to the use of small-arm ammunition; on the other hand, the Hotchkiss is to be in reality classed with boat-guns. [Illustration: Lock, Extractor, and Breech-Cover.] [Illustration: Breech Mechanism.] [Illustration: Chamber.] The Gatling has ten barrels grouped about a central axis. Each barrel is provided with its own separate lock and extractor, retracted by a cam, the barrels being each fired as it comes to a certain point. The speed of firing can be carried as high as between 400 and 500 cartridges a minute without much forcing. There are two patterns of this gun, known respectively as the long and the short gun, the latter being designed especially for use in ships’ tops, while the former is used in landing and long-range firing. The cartridges are fed to the gun in tin cases holding 40 each, and which are rapidly put in position and changed so that there is no especial time lost in removing one case and shipping another. In case that one barrel should become fouled or a lock be broken, the lock can be extracted very quickly and so no hindrance is offered to the working of the mechanism, as cartridges dropping into the faulty chamber are carried around and dropped out without being fired. Notwithstanding the great rapidity of the fire there is no danger of the barrels becoming too much over-heated, and the great difficulty experienced in most guns of the mitrailleuse pattern of sticking and refusing to work, through the expansion of the barrels and mechanism due to the heat of rapid firing, is either fully avoided or compensated in the Gatling. [Illustration: Barrels, Chamber, and Revolving-Gear.] [Illustration: Frame and Covered Breech.] SMALL-ARMS. Breech-loading small-arms are used in all the navies of the world, and, as with great-guns and machine-guns, although the greater nations strive to develop patterns of their own, many use the same pattern; small-arms of American manufacture being used by the majority. In many navies these arms are of two patterns, generally one of them being some system of conversion from old smooth-bores, whilst the other is a gun of a new pattern. _Types of Small-Arms in Use in the Different Navies._ COUNTRY. TYPE. ARGENTINE Remington. AUSTRIA Werndl. BRAZIL Remington. CHILI Remington. CHINA Peabody-Martini. DENMARK Remington. ------------------------------------------------- Snider (converted), ENGLAND Peabody-Martini. ------------------------------------------------- Tabatière (converted) FRANCE Chassepot. ------------------------------------------------- GERMANY Mauser. HOLLAND Beaumont. GREECE Chassepot. ITALY Vetterlin. JAPAN Remington. NORWAY AND SWEDEN Remington. PERU Remington. PORTUGAL Peabody-Martini. ------------------------------------------------- Krnka (converted), RUSSIA Berdan. ------------------------------------------------- SPAIN Remington. ------------------------------------------------- Snider (converted), TURKEY Peabody-Martini. ------------------------------------------------- Remington, UNITED STATES Hotchkiss (Magazine), Springfield (Marine Corps). The United States Navy is the only one in which the magazine rifle has been introduced. The Springfield, used in this country by its Marine Corps, is a converted rifle. The Beaumont rifle, used in Holland, the Peabody-Martini and Snider, used in England, and the Berdan, used in Russia, are all modifications of original American types. CONVERTED BREECH-LOADERS. _Snider. Tabatière._ [Illustration: Snider.] [Illustration: Tabatière.] These two systems of conversion are almost identical, differing only in one or two of the minor points. The breech-block is hinged to open transversely, the lug of the hinge being somewhat shorter than the axle, the intermediate space being filled by a spiral spring which holds the block forward. By drawing back the block against the spring after opening, the extractor which is attached to the forward part withdraws the empty cartridge-case. There is no lock on the block, the pressure of the hammer on the firing-pin holding it down. _Krnka._ [Illustration: Krnka.] [Illustration: Breech-Block.] This system is a Russian invention, and is exceedingly simple and compact. The breech-block revolves transversely, and the movement of opening causes the extractor, which is a simple lever, to throw the cartridge-case out of the chamber. Two lugs rise in rear of the breech-block, leaving a cavity between them for the insertion and ejection of cartridges. The breech-block when closed is held down by the hammer on the firing-pin. _Springfield._ [Illustration: Springfield.] In the Springfield system the breech-block hinges at the upper forward end and is turned up. The extractor is operated by a small spring which ejects the cartridge-case forcibly on throwing open the breech-block. The firing-pin passes diagonally through the breech-block to the axis of the bore. A catch holds the rear of the block down when closed, and the bottom of the block is hollowed out to lighten it. NEW SYSTEMS. _Peabody-Martini._ [Illustration: Martini-Henry.] In this system the breech-block is hinged at its upper rear end and drops down in opening. It is opened and closed by a bent lever in rear of the trigger-guard. The extractor is a bent lever, the lower front of the breech-block striking it in opening and causing it to violently eject the cartridge-case. The firing-pin is in the axis of the breech-block, and is retracted and cocked by the motion of opening the breech. By means of a small slide just in front of the trigger the firing-pin can be secured at full cock. A small pointer on the left outer face of the receiver serves as a tell-tale to show when the piece is at full cock. _Werndl._ [Illustration: Werndl.] The breech-block of this piece revolves about an axis just below the barrel, and by its revolution works the extractor and throws the empty cartridge-case out. The firing-pin is of the ordinary type, held back by a spring and operated by the blow of a hammer. The head of the bolt in which the breech-block revolves has for its section a segmental shape, and a flat spring presses upwards against it. One of its flat sides presses on the spring at each extreme position of the breech-block, and by this means the block is held secure when open or shut, whilst the movement of opening is made with a snap, assisting in the ejection of the empty case. _Mauser._ The breech-block of this piece is a cylindrical block travelling lengthwise, and turned and moved by a projecting thumb-piece. A part of the right side of the slot-way in which it travels is cut away, so that in pushing forward the block to close the breech it may be turned also; projections on the thumb-piece cut with a slant, taking against the sides of the cut so as to force the block, close up wedge-fashion and hold it secure. The extractor is secured to the nose-piece of the block. The firing-pin travels in the axis of the block and is retracted, or rather the spring is pressed forward, as the block is drawn back, being held cocked by the sear when the block is pushed forward again. This gun is a modification of the old Chassepot. [Illustration: Mauser.] [Illustration: Chassepot.] _Le Gras (modified Chassepot)._ This gun is the same in principle as the one just described, it being in reality a system of conversion from the old needle-gun used in connection with a paper cartridge, to the new one using brass cartridge-cases. The principal differences between the Mauser and the Le Gras are in the details of the trigger and in the use of a rubber gas-check. _Berdan._ The breech-block of this system is pivoted at the upper forward end, and is opened by drawing back the locking-bolt to its full extent and then throwing the breech-block up. In drawing the bolt back the firing-pin is cocked, as in the Mauser pattern, and throwing the breech-block up operates the extractor. [Illustration: Berdan.] _Remington._ The breech-block of this system is pivoted at its lower extremity, and is held fast by a hammer-block. Cocking the latter, the breech-block may be thrown back, working the extractor. [Illustration: Remington.] _Hotchkiss Magazine._ The breech-block of this system is on the principle of the Chassepot, being turned by a thumb-piece to unlock it and then retracted, the operation of retracting, cocking the firing-pin, withdrawing and ejecting the old cartridge-case, and opening the magazine, from whence a fresh cartridge is pushed in front of the block by a spiral spring. The magazine runs along the axis of the butt-stock, and is provided with a feed-stop by which the supply may at any time be shut off. [Illustration: Hotchkiss Magazine.] RECAPITULATION OF NAVAL ORDNANCE. NATION.| TYPE OF ORDNANCE. | CALIBRES. --------+-----------------------------------+----------------- | | Inches. | Krupp steel breech-loaders | 11, 10¼, 9¼, 8¼, 5⅞ | Armstrong muzzle-loaders | 9, 7 | Austrian bronze breech-loaders | 3½, 2½ Austria | Werndl (small-arms) | 0.42 | Hotchkiss revolving cannon | 1½ | Gatling machine-guns | ½ --------+-----------------------------------+-------------------------------------- | Whitworth muzzle-loaders | 10¼, 9½, 7, 6, 4½ Brazil | Brazilian cast-iron smooth-bores | 8, 6 | Gatling machine-guns | ½ | Remington (small-arms) | 0.45 --------+-----------------------------------+-------------------------------------- | Krupp breech-loaders | 9¼, 8¼ Chili | Armstrong muzzle-loaders | 9, 4½ | Gatling machine-guns | ½ | Remington (small-arms) | 0.50 --------+-----------------------------------+-------------------------------------- | Armstrong muzzle-loaders | 12½, 12, 10, 7 China | Vavasseur muzzle-loaders | 12 | Gatling machine-guns | ½ | Peabody-Martini (small-arms) | .45 --------+-----------------------------------+-------------------------------------- | Krupp breech-loaders | 12, 10¼, 6½ | Armstrong muzzle-loaders | 10¼, 9, 7¾ Denmark | Nordenfeldt machine-guns | 1¾ | Palmcrantz machine-guns | ½ | Beaumont-Remington (small-arms) | 0.45 --------+-----------------------------------+-------------------------------------- | Woolwich muzzle-loaders | 16, 12½, 12, 10, 9, 8, | | 7, 6¼, 3 | Armstrong muzzle-loaders | 17, 7 England | Palisser converted muzzle-loaders | 6¼ | Armstrong breech-loaders | 7, 4¾, 3¾, 3, 2½ | Gatling machine-guns | 1½ | Snider converted (small-arms) | 0.57 | Peabody-Martini (small-arms) | 0.45 --------+-----------------------------------+-------------------------------------- | French breech-loaders | 13¼, 12½. 10¾. 9½. 7½, | | 6½, 5½ France | French bronze muzzle-loaders | 4¾, 3½ | Hotchkiss machine-guns | 1¾, 2 | Chassepot (small-arms) | 0.42 | Tabatière (converted small-arms) | 0.50 --------+-----------------------------------+-------------------------------------- | Krupp breech-loaders | 12, 11, 10⅜, 10¼, | | 9¼, 8¼, | | 6¾, 5⅞, 4¾, 3¼ Germany | Palmcrantz machine-guns | 0.50 | Mauser (small-arms) | 0.42 --------+-----------------------------------+-------------------------------------- | Armstrong muzzle-loaders | 9, 7 Greece | Chassepot (small-arms) | 0.42 | Hotchkiss machine-guns | 1¾ --------+-----------------------------------+-------------------------------------- | Krupp breech-loaders | 11, 6½, 7, 4¾ | Armstrong muzzle-loaders | 11, 9 Holland | Hotchkiss machine-guns | 1¾ | Gatling machine-guns | 0.50 | Remington-Beaumont (small-arms) | 0.45 --------+-----------------------------------+-------------------------------------- | Armstrong muzzle-loaders | 17, 11, 10, 9, 8 | Italian breech-loaders | 4¾, 3½, 3 Italy | Hotchkiss machine-guns | 1¾ | Albertini machine-guns | 0.50 | Vetterlin (small-arms) | 0.42 --------+-----------------------------------+-------------------------------------- | | | Krupp breech-loaders | 9½, 6¾ Japan | Armstrong muzzle-loaders | 9, 7 | Gatling machine-guns | 0.50 | Remington (small-arms) | 0.50 --------+-----------------------------------+-------------------------------------- | Krupp breech-loaders | 10¼, 6 | Finspong, breech-loaders | 10⅞, 9½, 6½ Norway | Cast-iron muzzle-loaders | 6½, 4½ and | Nordenfeldt machine-guns | 1¾ Sweden | Palmcrantz machine-guns | 0.50 | Remington (small-arms) | 0.45 --------+-----------------------------------+-------------------------------------- | Whitworth muzzle-loaders | 8½, 7, 6 Peru | Armstrong muzzle-loaders | 9, 7 | Gatling machine-guns | 0.50 | Remington (small-arms) | 0.50 --------+-----------------------------------+-------------------------------------- | Krupp breech-loaders | 10¼, 6 Portugal| Armstrong muzzle-loaders | 6, 4¾ | Gatling machine-guns | 0.50 | Peabody-Martini (small-arms) | 0.45 --------+-----------------------------------+-------------------------------------- | Krupp breech-loaders | 12, 11, 9, 8, 6, 4, 3½ | Russian bronze muzzle-loaders | 4, 3½ | Rodman cast-iron smooth-bores | 20, 15, 10¾, 7½, 7, 6½ Russia | Gatling machine-guns | 0.50 | Hotchkiss machine-guns | 1¾ | Krnka (converted small-arms) | 0.50 | Russian Berdan (small-arms) | 0.40 --------+-----------------------------------+-------------------------------------- | Armstrong muzzle-loaders | 9⅞, 9, 7⅞ Spain | French breech-loaders | 9, 7, 6¼, 4¾ | Gatling machine-guns | 0.50 | Remington (small-arms) | 0.45 --------+-----------------------------------+-------------------------------------- | Armstrong muzzle-loaders | 10, 9, 8, 7, 4¾ Turkey | Krupp breech-loaders | 10⅜, 9¼, 6¾, 5⅞, 3¼ | Gatling machine-guns | 0.50 | Peabody-Martini (small-arms) | 0.45 --------+-----------------------------------+-------------------------------------- | French breech-loaders | 7½, 5¼, 4¼, 4, 3½, 3 | Dahlgren smooth-bores | 15, 11, 9, 8, 6½, 3 | Parrott muzzle-loaders | 8, 6½, 5¼, 4¼, 4, 3 United | Hotchkiss machine-guns | 1¾ States | Gatling machine-guns | 0.50 | Hotchkiss magazine (small-arms) | 0.45 | Remington (small-arms) | 0.45 | Springfield (converted small-arms)| 0.45 --------+-----------------------------------+----------------------------------- [Illustration: PENETRATING POWER OF ENGLISH PROJECTILES Showing the Penetrating power of Projectiles fired from English Guns against Iron-clad Ships of war. Each target represents a certain class of vessel at a distance of 70 yards except where the range at which projectiles would penetrate is stated. NOTE.—Where the target is shown pentrates but no range given it includes all distances up to 2000 yards.] [Illustration: DIAGRAM SHOWING THE PERFORATING POWERS OF PROJECTILES FIRED AT VARIOUS RANGES FROM GERMAN AND FRENCH BREECH-LOADING RIFLED GUNS.] [Illustration: NOTE.—The upper scale is for guns ³/₁₄ of an inch to 1 foot. The lower scale is for targets ¼ of an inch to 1 foot.] [Illustration: SHOWING THE PENETRATING ENERGY, IN FOOT-TONS PER INCH OF SHOTS CIRCUMFERENCE, OF FOREIGN ORDNANCE. AT RANGES FROM 70 YARDS FROM THE MUZZLE OF THE GUN TO 2000 YARDS.] PART III. TORPEDOES. The torpedoes used by and against the different navies of the world may be classed under two general heads, viz., offensive and defensive. Offensive torpedoes may be classified in accordance with the manner in which they are used, as Locomotive, Towing, Spar, and Drifting. LOCOMOTIVE TORPEDOES. _The Whitehead Torpedo._ The Whitehead torpedo consists of a projectile, or more properly speaking a boat, containing a heavy explosive charge, an engine driven by compressed air, screw propellers, and mechanism for regulating the speed, depth of flotation, distance of run, and security of firing arrangements. The general exterior appearance of the torpedo is that of a spindle of revolution, its greatest diameter being in the middle and the lines being so curved as to present a surface of minimum resistance to the water. The dimensions of the torpedo range from fourteen feet in length by sixteen inches in diameter to nineteen feet by seventeen inches. The speed ranges from seven knots for a distance of eight hundred yards up to twenty-five and a quarter knots for two hundred yards, the most powerful combination being fifteen and a half knots for one thousand yards. [Illustration: Whitehead Torpedo and Firing-Tube.] This torpedo, if adjusted to run at any desired depth of water of from five to fifteen feet, and if it be projected from either above water, at the water-line, or below the surface, will rapidly attain the desired depth and maintain it throughout the run. If fired in still water, it will make a straight run in the line of projection, allowance being made for the sweep of currents. It can be adjusted to stop after having run any distance up to its extreme range, and after stopping, it will sink, float, or explode as desired. The gun-cotton charge is placed in what is termed a cartridge-case, which is a wooden case similar in shape to the forward section of the torpedo, somewhat smaller, and held in place in its compartment by wooden wedges. This charge is ignited mechanically, the arrangement being as follows: Extending from the nose of the torpedo to the cartridge-case is a tube terminating in a copper case, in which is placed the priming charge and the detonating composition; within the tube is a steel rod, two feet long, fitted with a needle-point at its inner end and having its outer end screwed into a frame; this frame is capable of moving in and out, and is connected with a spiral spring which tends to force it, and consequently the steel rod, inwards, the action being similar to that of the firing-pin of breech-loading small-arms. By compressing this spiral spring, the inner end of the frame is brought forward to a catch and held retracted. If now this catch is disengaged in any manner, the rod flies back, acting like an ordinary firing-pin on the detonating composition. The extreme forward point of the torpedo, called the nose-piece, is so fitted that it is capable of being forced inwards, but in a position of rest its inner edge is just clear of the catch. This nose-piece is provided with short horizontal and vertical arms, so as to insure good contact with the body struck. The collision of the nose-piece against any resisting body forces it back and releases the firing-pin. In order to secure against accident, the nose-piece is provided with a safety-wedge and key. Before discharging the torpedo the key is removed, and after the discharge the wedge is withdrawn by the action of mechanism, and is so arranged that it may be replaced automatically and thus disarm the torpedo after its run, in case it is desired to recover it. The arrangement for adjusting the length of range and for drawing and replacing the wedge is as follows: Two cog-wheels, a large one and a small one, are fixed on the upper part of the after-end of the torpedo, just in front of the propellers. The small wheel has thirty teeth, gearing in an endless screw attached to the propeller-shaft, and of such a pitch that one revolution of the propeller moves the wheel one tooth. The big cog-wheel is so arranged as to move one tooth for each revolution of the small wheel. In front of this gearing is a small stud that works fore and aft in a slot, being provided with a spring which tends to force it towards the after-end of the slot. This stud is connected by a rod to the valve which admits the compressed air to the cylinders of the engine. When the stud is in the forward part of the slot the valve is open, in the after part it is closed. By means of a lever the spring of the stud is compressed, and the stud is moved to the fore part of its slot; the big wheel is then moved around until a stud on its face is the desired number of teeth above the lever. Now for every thirty revolutions of the propeller, or one tooth of the big wheel, a certain known distance is travelled, varying according to the pattern of the torpedo, slip, etc. When the propeller has made the number of revolutions corresponding to the desired length of range, the stud on the big wheel presses against the lever of the spring and releases the latter, forcing the valve-rod back and closing the valve. Attached to the axle of the big wheel is a small brass arm which is connected by means of a brass rod to the safety-wedge, and is so arranged that after any required number of revolutions of the propeller the safety-wedge will be drawn out; or it may be drawn out at the instant of discharge. By means of an additional lever at the fore port of the torpedo, which is connected by means of a rod to the valve of the engine, and by arranging the attachment of the safety-wedge to the brass rod from the big wheel so that on the wedge being withdrawn it is released from the brass rod, the action of the closing of the valve after the run of the torpedo is completed, forces the wedge into its securing position again. Naturally the torpedo would float at the end of its run from its difference of buoyancy, owing to the compressed air used in working the engines. To sink the torpedo at the end of its run, a spiral-spring valve is placed in the after wall of the adjustment chamber, which can be attached to the brass rod working the engine-valve in such a way that when the latter valve is closed the spring-valve is opened, admitting water to the chamber and thus sinking the torpedo. If it is desired to explode the torpedo at the end of the run, the nose-piece is connected to the engine-valve, which, on closing, draws it violently back and releases the firing-pin. To adjust the depth of flotation, a small wheel, the face of which is marked in feet, is placed in the adjustment chamber, and is turned by means of a key until the number of feet desired comes under a pointer. The secret of the Whitehead is in the mechanism by which the torpedo maintains a desired depth. The adjustment chamber, which is next abaft the explosion chamber, is connected by screw to the forward and after chambers in such a manner that by means of a number of small holes bored around the circumference the faces of the chamber are exposed to the pressure of the outside water, which varies with the depth to which the torpedo descends. Within the adjustment chamber is an endless strong spiral spring, attached to the after face of the chamber, and so arranged that after being set to a certain tension, capable of resisting an equivalent pressure on the outside of the face, any increase or decrease in this pressure will cause this spring to work a rod by which the horizontal rudders of the torpedo are regulated. Within this adjustment chamber is also placed an automatic balance, which assists in maintaining the torpedo at the desired depth by swinging forward on the torpedo’s descending or aft on ascending, and thus assisting the rudders. The Whitehead may be discharged through a submerged tube in the stern or in broadside, from a carriage above the water-line, or from the surface. For discharging under water a tube is fitted to an orifice in the stern or broadside, closed by a water-tight valve; the inner end is closed by a water-tight door. The torpedo, being prepared, is placed in the tube, the door is shut, water is admitted to the interior, and the valve is opened. The torpedo is then shot out and started by means of a piston bearing against its rear end and worked by compressed air. To prevent it from slipping out before the time, a stop is provided at the forward end of the tube, which is removed automatically at the same time that the compressed air is admitted to the piston. In the case of broadside discharge, the tube works inside an iron casing, through a stuffing-box at the inner end and in a shield at the outer end. The shield, placed on the forward side of the orifice, is of such a length as to protect the torpedo from the pressure of the water passing the vessel. In projecting from above water, an iron carriage is used, which is fitted with a frame in which the torpedo rests. The outer end of this frame is provided with a lip a few feet long, by means of which the rear end of the torpedo is slightly canted up on leaving the frame, preventing undue strain on the extreme end. The frame is mounted in the carriage in such a way that it can be elevated or depressed by means of a screw, like a gun. The torpedo is ejected by means of a piston as before, the carriage being provided with a small reservoir of compressed air so that it may be moved to any point aboard ship. To project from the surface, no tube is necessary; all that is required is to set it for the depth, point it, and turn back the lever by hand, when it starts off of its own accord. For discharging from boats, the torpedo is either mounted on its carriage forward or carried in iron slings suspended from davits. In the latter case the davits are pivoted, so that normally the torpedo rests in a cradle on deck; but the cradle being removed, the davits are swung over, lowering it to about two feet below water, where it is held securely until discharged. The propeller is worked by means of a pair of Brotherhood engines, working to 60 indicated horse-power and giving 1000 revolutions a minute. Weight of charge, 33 lbs. gun-cotton; weight of torpedo, 500 lbs. THE LAY TORPEDO. The shape of the Lay torpedo is quite similar to that of the Whitehead, although it is considerably larger. As in the Whitehead, the forward section forms the explosion chamber. Next abaft this is a chamber for holding the gas reservoirs, carbonic-acid gas being the motive power. Next aft is the compartment for holding an electrical cable, which forms a constant connection between the torpedo and the operator. In rear of this is the compartment for the engines and steering apparatus. These sections are separated from each other by water-tight bulkheads. The torpedo is propelled by double screws, the propellers working in opposite directions and being placed one abaft the other, the shaft of the forward one being hollow and that of the after one passing through it. The torpedo has four horizontal fins or wings, two forward and two aft; these wings are mounted on shafts or spindles passing transversely through the boat. A guide-rod or short staff is provided at each end of the torpedo to enable the operator to regulate the course. At night lanterns are hung on these rods. The electrical cable, made up of two insulated wires, is wound on a reel, and pays out through a hole in the bottom of the compartment as the boat advances. By means of one of these wires the boat is started, stopped, and steered, and by the other it is fired. [Illustration: Lay Torpedo.] A double steering-rudder is used, one half being above and the other below the line of the propellers; these rudders are worked by means of a small auxiliary, engine, which is started, stopped, and reversed by means of the electrical current. The current passing in one direction starts the engine ahead, putting the helm to starboard. If the current is broken, the engine stops and the rudder swings amidships. The current passing in the opposite direction reverses the engine and puts the helm to port. In the firing circuit there are two resistance-coils, one in the boat and one by the operator; the charge may be fired through either one of the coils, but not through both. When the nose of the torpedo strikes a resisting object the coil in the boat is cut out of circuit and the charge is exploded. If the operator desires to fire before striking, he can at any moment cut the coil near him out of the circuit and thus fire. The propelling engines have a throttle-valve which controls the admission of gas from the reservoirs to the cylinders, the valve being in connection with a balanced lever. The current passing one way draws down one end of the lever, opening the valve, and passing the other draws the other end down, closing it. In one modification of this torpedo the forward compartment or magazine is made detachable, so that on striking an object it breaks adrift and sinks a short distance before exploding, thus gaining the best depth of water. In launching these torpedoes from a vessel, a tube is provided opening below the water-line and being provided with a forward water-gate and a rear loading-door. The torpedo being put in place, the rear door is closed, the gate raised, admitting the water, and the torpedo launches itself after the engine is started. In order to sink or raise the boat, a water-chamber is supplied having a valve for admitting outside water and another for the admission of gas. By sending a current one way, the water-valve is opened and water is admitted until the torpedo is sunk to the required depth. By sending the current the other way, the gas-valve is opened and the pressure of the gas forces the water out and the torpedo rises. The Lay torpedo may be used for clearing river obstructions, by laying out small charges in any position or by dragging a grapnel. In the latter case, an exploding charge is attached to the upper end of the grapnel-chain. When the grapnel holds fast to any obstruction the operator is notified, and by means of an electrical current he detaches the charge, which slides down the grapnel-chain and explodes at the obstruction, blowing it away. TOWING TORPEDOES. _The Harvey Torpedo._ [Illustration: Harvey Torpedo.] [Illustration: Towing-Reel.] [Illustration: Levers.] [Illustration: Firing-Bolt.] The general form of the Harvey torpedo is that of a box of a rectangular vertical and trapezoidal horizontal section, intended to float on end and tow at an angle from the ship’s keel. The case is generally made of copper or Muntz’s metal sheathed with wood; the upper inner edges being provided with shackles for attaching a towing-span. The body of the torpedo is also the magazine, large enough to hold from 33 to 58 lbs. of gun-cotton. The firing-bolt with its fuse attachment enters the magazine from the middle of the top or deck of the torpedo. This bolt is acted upon by a series of levers so arranged that if the torpedo strikes in any position, one of the levers will drive the bolt down and explode the fuse. In the later patterns of Harvey torpedoes there is also a small rudder attached, by which the course of the torpedo is regulated when the tow-rope is suddenly slacked. The sling is made with four legs going to the corners of the torpedo and of a length to bring the centre of effort in the right position for towing the torpedo at a good angle of divergence. The firing-bolt is so arranged that the torpedo may be fired in three different ways: electrically on contact, mechanically on contact, or electrically at will. The mechanical arrangement is an ordinary chemical fuse placed in the firing-bolt in connection with a small vial of sulphuric acid. When the firing-bolt is forced down by the contact of the levers with any resisting substance, the vial is broken by coming in contact with a stout needle and the acid ignites the fuse. For firing electrically at will, a platinum-wire fuse is used; one terminal going to earth at the torpedo, and the other passing through the firing-bolt and attaching to the insulated wire core of the tow-rope leading aboard ship. To fire on contact electrically, a resistance-coil is introduced in the circuit at the fuse in such a manner that by forcing the firing-bolt down the resistance-coil is cut out of the circuit and the fuse is fired by the short circuit. The firing-bolt is fitted to act with a pressure of from 30 to 40 lbs. on its head, and under ordinary circumstances is secured by a key in the ordinary manner of keying bolts. If these torpedoes are left to sink of themselves, they will explode at a depth of about 60 fathoms from the pressure of the water on the head of the bolt. In order to hold the torpedo steady when towing, it is provided with cork buoys which tow astern of it. The buoy-rope is rove through a ring at the after-end of the torpedo, and has an eye spliced in its end to which the tow-rope knots after reeving through the eye of the sling. The firing-bolt key has a small line attached to it by which it is withdrawn whenever desired after the torpedo has been launched. The tow-rope coming from the torpedo reeves through a leading-block on a spar lashed about 25 feet above the deck, and, coming inboard through another leader, passes to a reel secured on deck and controlled by friction-brakes. To launch this torpedo, it is hoisted by its tow-rope clear of the side, and the rope then being rapidly veered until the torpedo strikes the water and then gradually checked, it diverges at once. Veering then slowly, the torpedo takes its position at an angle of about 45° from the ship’s side. In attacking a vessel, when the torpedo has been towed to within a short distance of the desired point, the tow-rope is rapidly veered and the torpedo dives; checking the rope, it rises almost immediately, and at a very sharp angle bringing up against the vessel’s bilge. In case it becomes necessary to get rid of the torpedo, the tow-rope is cut at the reel and unreeves and the torpedo sinks. There are two rings for reeving the buoy-rope through, a large one and a small one. If the rope is rove through the large ring, the torpedo is lost when the tow-rope is cut; if rove through the small ring, the knot connecting the buoy-rope and the tow-rope brings up against it, and the torpedo is held up and buoyed the length of the buoy-rope below water. In securing the torpedo after the key has been withdrawn from the firing-bolt, a pair of tongs is used to grasp the bolt and keep it from being forced down. _The Menzing Towing Torpedo._ This is a modification of the Harvey, used in the German service, intended to overcome objections to the original in regard to facility of use. The general shape is slightly different, the forward end being wedge-shaped so that the torpedo may be towed on either side. This torpedo has two tow-ropes, each rove in a similar manner. The ends of the ropes are provided with two legs which are made fast to the after-end of the torpedo, where is a small rudder, the ropes coming to it and acting on it in such a manner that when a strain is brought on one it turns the rudder in the opposite direction. Secured to the bow of the torpedo is a crane, having at its end an eye through which the main part of both tow-ropes reeves. If it is desired to tow on the starboard side, the starboard tow-rope is slackened, bringing the entire strain on the port one; the crane at the bow of the torpedo swings around by the strain until it brings up against a knot at the splice of the legs, thus forming with the legs a complete bridle; the divergence of the torpedo is at the same time assisted by the action of the rudder. Levers for firing mechanically are applied in much the same manner as in the Harvey. A circuit-wire for electrical firing and buoys for steadying the torpedo are also used. By these arrangements the torpedo may be towed astern until required for use, and then by slacking the necessary tow-rope it may be swung out on either quarter desired. [Illustration: Menzing Torpedo.] _The French Towing Torpedo._ This torpedo is in the shape of a long box tapered at the forward end. It is made of wood, with a cork bow, the powder-chamber being hung between the cork and the main body in such a manner that it may be detached automatically. This is secured by a bolt projecting from the top of the powder-case, whose head is held by a movable plate. The slot in the plate through which the bolt-head passes is larger than the bolt-head, so that when the plate is knocked back the bolt slips through and the magazine is detached. Two curved whiskers project forward from the plate as contact-points. In order that the torpedo may be exploded at the proper depth, two shafts are pivoted to the bottom of the float and attached to the magazine. When the latter is detached it drops down the full length of the shafts (9 feet below the surface), and on reaching that position the electrical circuit is closed and the charge is fired automatically. To fire the torpedo at will, a miniature gun is mounted on the after-part of the plate, which is fired by electricity; the recoil draws the plate back and thus releases the chamber. The magazine of this torpedo holds 33 lbs. of dynamite. [Illustration: French Torpedo.] SPAR-TORPEDOES. _The American Torpedo._ [Illustration: American Spar-Torpedo.] American spar-torpedoes are of two general forms. The first, for gunpowder charges, is in the shape of a long cylinder with hemispherical ends. The second, for dynamite charges, is in the shape of a large double convex lens. The powder torpedoes have a capacity for a charge of from 75 to 100 lbs. of small-grain powder; the dynamite ones have a capacity of from 15 to 30 lbs. In the gunpowder torpedo a large hollow spindle passes through the axis, closed and secured at one end by a large nut. This spindle is pierced with flame-holes at short distances, so as to permit the flame from the fuse to penetrate and ignite all parts of the powder-charge at once. Around this spindle is a guard of wire gauze to prevent the powder from the charge sifting into and choking the flame-passages. This spindle projects some little distance beyond the inner end of the torpedo-case, forming a handle or support by which the case is attached to a spar. At the inner end on each side of the spindle is a loading-hole secured by nuts and washers. There are also four handles, two on each side of the case, for convenience in transporting. The 100-pdr. torpedo loaded and fused weighs about 360 lbs. The torpedo-fuse, which is an electric one, finds a place by itself inside the spindle, the terminal wires passing through a simple water-tight gland. [Illustration: Socket for American Spar-Torpedo.] [Illustration: Wood and Lay’s Spar-Torpedo.] [Illustration: Boat-Fittings for American Spar-Torpedo.] On the end of the torpedo-spar is lashed a cast-iron sleeve into which the end of the spindle is keyed. The torpedo-spar for use on the bows or broadsides of vessels varies in length from 20 to 50 feet, and is supported and pointed by guys and lifts in the same manner as is common with swinging spars generally. The wires from the fuse are brought in along the spar to the electrical machine and firing-keys arranged in suitable positions. The spars used in boats are generally arranged on a different principle from those attached to the bows or beams of high-sided vessels. Arranged to work in a swivelled sleeve with a martingale at the rear end to regulate the depth to which they shall sink, the spar is either launched or dropped over and is permitted to swing without guys, the operator watching and exploding it as it is brought abeam and into the desired position by the driving ahead of the boat. [Illustration: Fitting for Heel of Spar Ship-Torpedo.] [Illustration: Chafing-Plate for Heel of Spar-Torpedo.] The spar used with the dynamite torpedo is an iron or steel bar of diminished cross-section in order to offer a minimum resistance to the water, with a hinged piece at its rear end bolting to the keelson of the boat and acting as a martingale. TORPEDO VESSELS. In several of the navies of the world gun-boats have been designed for the purpose of using torpedoes, either locomotive or spar, to the total exclusion of battery—or, in some cases, with a limited artillery—fire. _Pietro Micca_ (Italian). This vessel, having a displacement of about 530 tons, is built very low in the water, with a curved deck or cover, and is not armored except as regards a deck under the curved cover and over the engines, intended to resist the penetration of plunging projectiles, and which is of laminated steel 2¼ inches thick. Her estimated speed is 18 knots, and she is provided with tubes for discharging Whitehead torpedoes ahead, abeam, and astern. _Rau_ (Swedish). _Ziethen_ (German). _Vesuvius_ (English). _Uzreef_ (Russian). Whitehead torpedo gun-boats of from 400 to 700 tons displacement and an estimated speed of from 13 to 16 knots. The peculiarity of the Vesuvius is in having an elbowed smoke-stack carried along the deck. The Rau carries a light rifled gun. All carry machine-guns. _The Alarm_ (American). The Alarm is an iron ram gun-boat, built on the transverse bracket system, with a double bottom and water-tight bulkheads every 25 feet. Her dimensions are: length, 173 feet; beam, 28 feet; draft, 11 feet—which may be increased by sinking the vessel to the level of the upper-deck beams, arrangements having been made for the admission and ejection of water in the compartments formed by the double hull. The torpedo system of this vessel consists of three hollow steel tubes, one projected from the end of the ram a distance of 30 feet, and one from each broadside, 17 feet. These tubes slide in and out on frames, and are worked by small auxiliary engines and winches; the torpedo is fitted to the end of the spar and is fired by electricity. The port from which the spar is projected, being below the water-line, is provided with a water-box and double doors and heavy rubber washers, which grip the spar water-tight as it is run out. In addition to the torpedo system, this vessel is arranged to carry a 10-inch rifle forward. Her ram is strengthened, and her bow is protected for some distance by a plating of 4½ inches. On her rail she carries machine-guns to resist the attack of torpedo-boats. Her propeller is of a novel pattern, serving as steering-gear and propelling power. This vessel was originally fitted with a propelling apparatus known as the Fowler steering-wheel, a novel propeller which both gave the vessel headway and steered her. The blades of the propeller were worked by means of a simple steam-valve arrangement manipulated by the helmsman. The steering qualities with this apparatus were little short of marvellous, as she could be driven and steered with as great facility astern as ahead, and could even be worked sideways. Her speed, however, was deficient, never reaching ten knots. At present the vessel has been fitted with the Mallory steering propeller, a form of screw with a jointed shaft so that it may be revolved about a vertical axis. This screw promises to give a speed more nearly warranted by the fine lines of the vessel. _The Intrepid_ (American). This vessel is a gun-boat of about the dimensions of the Alarm, having a short, heavy ram bow and an armored belt at the water-line of five inches thickness all around. Her load draft brings her upper deck to within three feet of the water-line. This vessel carries no armament except a few Gatling guns on the rail, and her torpedo system consists of four ordinary swinging-spar torpedoes, two on each beam. Ordinarily these spars lie in crutches alongside, and they are manipulated by topping-lifts and guys in the ordinary way. The torpedoes are exploded by electricity. _The Destroyer_ (American). [Illustration: Ericsson’s Torpedo Vessel (Destroyer).] This vessel is 130 feet long by 12 feet beam and 10 feet draft, built with a straight bow, bow and stern lines being the same and very sharp. She has no upper-deck rail, this deck being very low, with a long superstructure rising amidships. There are no openings in the sides of this superstructure, so that if desirable the vessel may be run with her upper deck completely under water. Thirty-two feet from the bow a heavy armored bulkhead crosses the vessel, inclined at a vertical angle of 45°, and intended as a thorough protection to the engines and boilers, enabling the vessel to approach bows on with impunity. Her armament consists of a bow-torpedo, which is projected from a tube in a manner not unlike the firing of a projectile from a gun. This torpedo consists of a solid block of light wood having inserted in its forward end a heavy bursting-charge in a steel case. The transverse section of this torpedo is square; longitudinally it is a rectangle with sharpened ends. Ignition of the charge is obtained by means of a percussion fuse. To project this torpedo, it is inserted in a tube provided with water-gates, fixed in the bow of the boat just above the keel. A steam piston-rod fits against the after-end and pushes the torpedo out with a velocity sufficient to send it at least 100 feet. The weight of the torpedo is about 1400 lbs. This vessel has been tried, but the system is not yet perfected. _The Uhlan_ (German). This vessel is of a novel type, consisting of two separate hulls, one within and abaft the other, the intervening space being filled with cork. She carries affixed to a ram which projects ten feet forward from the stem a dynamite contact torpedo. Arranged to travel at a high speed, the idea is to carry her at full speed against the enemy, the crew finding refuge on a small raft which she carries and which is detached just before her striking. It is not expected that the main hull, in which are the engines and steering-gear, will be injured by the explosion. The raft, it is understood, is not completely detached from the vessel, but a long tow-line is paid out rapidly, and after the explosion of the torpedo the crew haul alongside and take the boat clear ready for another attack. TORPEDO-BOATS. _The Thornycroft Torpedo-Launch._ This boat is built to combine great speed with a moderate seaworthiness and resisting power. The dimensions range as follows: length, 57 to 85 feet; beam, 7½ to 10 feet; draft, 3 to 4 feet. They are built of steel of an average thickness of ³/₁₆ an inch, being completely decked over. Generally they are divided into six separate water-tight compartments. The forward and after ones are store-rooms; the second one is arranged for the accommodation of the crew; the third is the pilot-house; fourth, engine and fire room; and fifth, for the accommodation of officers. The single-screw shaft projects some distance beyond the stern-post to allow the double rudder to work forward of it. The screw itself is of a peculiar construction, so built as to project the water straight aft instead of radially. These launches are fitted for either spar or Whitehead torpedoes. In the former case the swivelled sleeve in which the spar works pivots abreast the pilot-house. In the latter case two methods are in use. By one, a Whitehead is carried on deck on each side mounted on a carriage running on rails, by which they may be run up to a firing-case on the forward part of the deck. This firing-case is mounted on a pivot-carriage and has depressing-gear, so that the torpedo may be pointed in any desired direction. A pointing apparatus is provided in the pilot-house by means of which allowance of angle may be made for the movements of the boat or of the attacked vessel. The pivot-circle is graduated so that the torpedo may be correctly aimed with but little difficulty. By the other arrangement, a Whitehead is carried on each side on pivoted davits in a sling, so that it may be lowered into the water; the machinery is then started by hand, and the torpedo moves off without being projected. In this case the torpedo can only be fired right ahead. [Illustration: H. M. Steam Torpedo Launch "Lightning". Thornycroft Torpedo-Launch. Length (extreme) 84 6 Beam 10 10 Draught 5 0 Speed 18 Knots] _The Yarrow Torpedo-Boat_ [Illustration: Yarrow Torpedo-Launch.] This is a launch of the same general construction as the Thornycroft, although a higher rate of speed is attained by this type, and there are several important modifications. The fire-room, or stoke-hole, is completely separated or bulkheaded off from the boiler, except the front part, so that in case the boiler collapses or is pierced by a shot there is no danger of scalding the crew. The pilot-house is placed aft in the compartment occupied by the officers. There is no visible smoke-stack. Two ports are cut in the sides of the launch, one on each side, and the products of combustion may be carried through either or both. The ports are provided with valves, which are held open by the force of the blast, but which close immediately if struck by a wave. The helmsman can direct the smoke through either port, so that in approaching a vessel the one on the side next to her is closed and the smoke through the other port is partially masked by the side of the boat. When running in a seaway both these ports may be closed, and a temporary smoke-pipe is shipped in the usual place. These boats are provided with a rudder at each end, both rudders being operated by the wheel at the same time. The forward rudder may be drawn up into a well, if desired, or in case that it gets fouled it can easily be dropped overboard. These boats have attained in smooth water a speed of 22 knots an hour. The torpedo arrangements are similar to those of the Thornycroft. Above 18 knots there is no noticeable vibration of the frame. _The Herreshoff Torpedo-Boat._ [Illustration: Herreshoff Torpedo-Launch.] The general type of hull is the same as that of the Yarrow and Thornycroft, except that it is of composite construction, having a steel frame with wood planking below water and steel above. The propeller is a single two-bladed screw, placed under the keel just abaft the middle of the boat, the hollow steel screw-shaft being put in on a curve. The rudder is of the balanced type, and is suspended underneath the after-part of the keel. The pilot-house is abaft the smoke-pipe. The boiler of this boat is of a novel character. It consists of a cylindrical combustion chamber about 4 feet in diameter, within which is a spiral coil of about 300 feet of two-inch pipe. This coil is continued at the top so as to form a kind of dome under the cover of the combustion chamber. By the side of the boiler is a separator into which the steam passes before it goes to the engine. The water from the feed-pump is admitted at the top of the coil, and during its course to the bottom the greater part of it becomes converted into steam. Having passed through the entire length of the coil, the steam and water are discharged together into the separator, in such a manner that the water is entirely separated from the steam and can be blown off as required. The steam is taken from the top of the separator and returns through a short coil placed inside the combustion chamber, where it becomes superheated and is led thence to the engines. By means of this boiler a good working pressure can be obtained in about five minutes from the time of lighting the fires. This boat may be rigged to carry either the Whitehead or the spar torpedoes. Its speed is about 18 knots, equal to that of the Thornycroft. [Illustration: Herreshoff Boiler.] SHIPS’ BOATS. Steam-launches are at present, as a rule, fitted with spar or Whitehead torpedo-gear of a general and simple type. It is not intended that these boats should be classed as fighting torpedo-boats, as they lack the requisite speed and protection, and, as a rule, are too noisy to be of use except in a general or concentrated attack. Such boats find their greatest sphere of usefulness in clearing channels of obstructions and countermining. For the former work many are now provided with electrical valve-gear and steering apparatus, by which they may be controlled from a boat towed some distance astern, as in the manipulation of the Lay torpedo. SUBMARINE BOATS. At different times during the development of torpedo warfare there have been many attempts to construct and perfect submarine boats of different types, but in no case has an attempt to use one been successful. The United States corvette Housatonic was sunk off Charleston Harbor in 1864 by a submarine torpedo-boat, but there are excellent reasons for believing that she was at the time of the attack used as an ordinary surface-boat with a bow-torpedo on a spar. In most cases the boats used, or rather designed, have been propelled by hand-power, their rate of speed being very low. Attempts are being made in all countries to perfect some form of submarine boat, and, judging from the experimental success attained heretofore, it is fair to suppose that some type will finally prove successful, although in any case its use would be extremely limited. DRIFTING TORPEDOES. Torpedoes of this description have been used in great numbers in time of war, but only with indifferent success. The especial function of the drifting torpedo is the destruction of vessels lying at anchor, the torpedo being sent adrift at a convenient point and allowed to float either at the surface or by means of a buoy at some distance below, and by the action of the current to be carried into contact with the vessel, being exploded by a contact-fuse. There is no especial shape considered superior for this type, and generally the torpedoes are extemporized from the most convenient materials at hand. Of the many types that have been tried there are two which may be considered especially dangerous. The first of these is a torpedo intended to be dropped by a vessel being chased, to be caught by the one in her wake. This type may be described in general as two torpedoes of a size sufficient to contain 20 or 30 lbs. of dynamite, connected by a rope or light chain bridle, and floated by flat water-colored buoys. Dropped from the stern of a vessel, the bridle is caught by the bow of the chaser, and the torpedoes being swept alongside explode against the bilges. _Lewis’s Drifting Torpedo._ [Illustration: Lewis’s Beam Torpedo.] This torpedo, intended to reach a vessel at anchor and surrounded by a boom of logs, consists of a case of powder or dynamite resting loosely on a small shelf attached to one extremity of a heavy pine beam, ballasting it in such a manner that it will float on end with the top just above water. The torpedo is attached to the beam by a loose chain bridle, the ends of which are stapled respectively to the lower end and just above the centre of gravity of the beam. The shelf itself is hinged, and is held in position by a catch operated by a small bell-crank lever on top of the beam. This beam on coming in contact with a boom is canted slightly, and the lever being tripped the shelf drops from under the torpedo, which, hanging by its bridle, cants the beam almost horizontally, thus allowing it to slip under the boom and float on against the ship’s side, where the torpedo explodes on coming in contact. DEFENCES AGAINST OFFENSIVE TORPEDOES. Vessels at anchor in protecting themselves against torpedoes establish three separate lines of defence. The outer line consists of guard-boats; the boats of the ship, either carrying machine and boat guns or having their crews armed with rifles, patrolling the approaches to the ship at such a radius as may be well guarded by the number of boats employed. The second line consists of a boom of logs or spars arranged around the ship at a distance of from twenty to fifty feet, having in addition, wherever practicable, heavy nets which hang down below the level of the keel. The third and inner line consists of the machine-guns and small-arms of the crew, the double hull and compartment construction of the vessel itself, and powerful electric lights which at intervals sweep the water in the vicinity of the vessel, lighting up every approaching object. DEFENSIVE TORPEDOES. Torpedoes of this class may be described generally as being either heavy cases of explosive material resting on the bottom of shallow channels and fairways, and usually exploded at will by electrical fuses, or smaller torpedoes anchored and either buoyed or supported at from three to twelve feet below the surface. The first class of torpedoes is of crude and varied construction, being simply heavy cases of boiler-iron of a capacity for from 100 to 200 lbs. of dynamite or 1000 to 2000 lbs. of powder, caulked water-tight and sunk generally within easy range of a heavy battery, in a position where a vessel would probably stop or anchor to open fire, or else in a shallow channel where a ship must pass directly over it. The buoyant torpedoes are of different form; the most successful types being _The Frame-Torpedo._ This consists of a row of heavy beams planted across a channel similar to a “chevaux de frise.” The inner ends of the beams are securely anchored to the bottom, the latter giving them a support when they are ran into. The outer ends carry each a single torpedo shaped like a large rifled shell and holding from 60 to 100 lbs. of powder; bolted to it so that the tops of the torpedoes are about eight or ten feet below water. These ends are moored so as not to swing about too much in the current. Just under the outer ends a frame is constructed to support the beams in case they get waterlogged. Contact-fuses are used with these torpedoes, and the whole arrangement serves the double purpose of acting as a torpedo and as a construction defence. These beams are also used singly in many cases. [Illustration: Frame-Torpedoes.] _Brooks’s Torpedo._ This form of torpedo is intended to baffle attempts at removal by sweeping with drags and grapnels. The beam used in this case is of a length sufficient to allow the top of the torpedo to be at the proper distance below water when it is vertical. The heel of the spar is shod with a pointed iron casing having a ring in the end connected to an anchor-shackle, the anchor being completely buried. In this manner the beam is free to oscillate. The torpedo, which is conical with a dome cover, ships on the upper end of the beam, all sharp corners and edges where a rope or grapnel might catch being avoided. In the top of the torpedo are placed five contact-fuses. In order to make this torpedo still more difficult of removal, it is placed in connection with a heavy ground-torpedo called a turtle-back in such a manner that any attempt to remove it from its berth causes the explosion of the turtle-back. _Singer’s Torpedo._ This torpedo contains an air-chamber in the upper part, whilst all the lower portion is devoted to the charge, varying in weight from 50 to 100 lbs. of powder. On top of the case is a heavy conical iron cover loosely secured, so that if the torpedo is struck a violent blow or is canted well over it will fall off. This cover is secured by a wire to a mechanical fuse (there are several different types) in such a way that the jerk given to the wire when the cover falls off will explode it. [Illustration: Brooks’s Torpedo.] [Illustration: Singer’s Torpedo.] [Illustration: Barrel Torpedo.] _Barrel Torpedoes._ Barrels are frequently used as torpedoes, being thoroughly caulked and pitched and strengthened as much as possible. They are slung with rope or chain slings, moored in position, and exploded either by contact or electrical fuses. In the majority of cases with defensive torpedoes at present, they are so arranged as to be fired either by contact or at will. TORPEDO-FUSES. Torpedo-fuses may be classified under four different heads; viz., Percussion, Friction, Chemical, and Electric. A percussion fuse is one in which the flame is produced by a blow on some fulminating compound. Of such a type is the fuse of the Whitehead torpedo, which in principle is precisely that of the firing arrangement of breech-loading small-arms. The shock on the nose of the torpedo starts it back, releasing the firing-pin spring, which driving against a cap or fuse of fulminate, explodes it. The fuse of Singer’s torpedo cannot depend directly on the shock of collision to explode it, as the shock might be very light. As an intermediary, therefore, the heavy cover of the torpedo is used, which falls off when the torpedo is tilted, and by its descending weight releases the lock mechanism. This consists of a firing-pin and spring secured vertically underneath the torpedo and held retracted by a small pin. This pin is withdrawn by the falling cover, permitting the firing-pin to drive forward against the bottom of the torpedo. Just over the spot where it strikes is a short rod travelling in guides, the upper end being in contact with a small capsule of fulminate, which is exploded by the shock of the outside pin. _The Torpedo Time-Fuse_ is in principle a lock mechanism in which the firing-pin catch is in connection with a train of clockwork. This clockwork being set to run for a certain length of time, the torpedo is set adrift to float against the vessel or obstruction, and the torpedo explodes at the end of the time for which it is set. The original and most crude form of this type of fuse is a candle cut to a certain length, the bottom being connected to a quick-match. It is not in this case a percussion fuse, as the quick-match communicates directly with the charge. [Illustration: Clockwork Fuse.] _McEvoy’s Fuse_ consists of a percussion system in connection with a small propeller. As long as the torpedo drifts with the current the propeller does not revolve, but if it is brought up in any way the force of the current starts the propellers, which after a few turns release the firing-pin spring. The torpedo by means of which the Albemarle was sunk (see cut, page 335) was exploded by a percussion fuse of still a different nature. The torpedo itself was attached to the end of a spar, but just before explosion it was intended to detach and capsize. A hollow tube passed through the axis of the torpedo, having at the nose-end an ordinary percussion-cap arrangement. The rear half of the torpedo formed an air-chamber, and at the rear end of the tube an iron ball, free to move along the tube, was held in place by a small pin to which a laniard was attached to be pulled by hand. The torpedo being thrust by the spar under a vessel was detached, and the air-chamber caused it to tumble bottom up immediately. The pin then being withdrawn by the laniard, the ball dropped on the percussion-cap and fired it. [Illustration: McEvoy’s Propeller-Fuse.] [Illustration: English Dynamo-Electric Fuse.] _Hill’s Fuse_ consists of a brass body having a percussion anvil screwed into its lower end. A spiral spring surrounds this anvil, projecting slightly above it and forming a seat for a light case holding the fulminate, which is of a very sensitive composition. Covering the top of the fuse-case, and just clear of the fulminate-case, is a light copper dome. A slight blow on this dome presses it in and drives the fulminate down on the anvil. _McEvoy’s Improved Percussion Fuse_ consists of a fuse-case containing an ordinary spring gun-lock, nipple, and percussion-cap. The hammer of the lock is held back by a vertical rod free to travel in a guide. On top of the rod is a ball held in place lightly by the upward pressure of a spring. In case that the torpedo is struck and tilted over the ball falls from its seat on the rod, the latter is forced up by the spring, releasing the hammer and exploding the percussion-cap. _Friction-Fuses._ Friction-fuses as a rule consist of some arrangement by which an ordinary friction cannon-primer is exploded. This is done by attaching a firing laniard to the friction-bar of the primer and either leaving it free, so as to fire at the will of the operator, or attaching it in such a way that the momentum of a vessel catching it will pull it. McEvoy’s improvement on Singer’s percussion fuse consists in attaching the laniard of a friction primer to the heavy cover. [Illustration: Barrel Torpedoes with Friction-Fuses.] _Chemical Fuses_ [Illustration: Chemical Fuse.] are those in which substances separated until required for action are then brought into contact and unite chemically with an explosive effect. _Sulphuric-acid Fuse._ This fuse consists of a brass fuse-case containing the magazine and crowned by a thin lead cylinder containing the chemicals, which consist of a small closely sealed glass phial of sulphuric acid placed in the tube and packed with a mixture of potassium chlorate and loaf-sugar. A slight blow on the lead cylinder breaks the bottle, thus permitting a contact between the explosive mixtures. _Harvey’s Torpedo-Fuse._ The principle of this fuse is precisely similar. The bottom of the firing-rod is in this case hollowed and partially packed with the potassic chlorate and loaf-sugar mixture. Over it a small bulb containing a few drops of sulphuric acid is placed and packed carefully with raw cotton. The mouth of the hole is then sealed with a lead capsule. The firing-rod is itself suspended over a firing-pin against which it is driven by the levers on the top of the torpedo. _Electrical Fuses_ depend upon the heating powers of an electrical current to ignite certain explosive substances, preferably gun-cotton. Although there are many modifications of the electrical fuse, they almost without exception agree entirely in general make. Two current wires are necessary, called terminals, and having their inner ends separated, in order that some substance offering a high resistance to the passage of the current may be inserted between them. The terminals are of copper wire; the resistance material or bridge is generally of fine platinum wire, although other substances are used in different types. The terminals are as a rule separated by a small block of hard wood which forms an insulator and a support. Around the bridge a wisp of gun-cotton is generally wrapped, although here again other explosives are used in modified forms. This combination is called an exploder, and it is inserted in a fuse-case or magazine containing powder or gun-cotton. The exploder and magazine together form the fuse. One of the terminals is generally attached to the exterior of the torpedo, which forms an earth; the other one is connected with an insulated wire or cable leading to the electrical battery. These fuses are made to explode either at will or on contact. If they are to explode at will, the firing circuit as a rule is not completed until the moment desired for explosion. If they are to explode by contact, the general manner of use is to insert in the circuit at some part a resistance-coil of sufficient force to weaken the current below the firing point. At the moment of contact, the resistance coil is automatically cut out and the torpedo is fired. Another way is to use what is called a circuit-closer, which normally leaves the circuit broken, but on being touched the circuit is closed and the torpedo is fired. [Illustration: American Dynamo-Electric Fuse.] [Illustration: English Dynamo-Electric Fuse.] One advantage of the electrical fuse is the facility with which the whole circuit may be examined at any time to test its condition. It is simply necessary to send a very weak current through the circuit, and, the resistance being known, the length of the circuit can be measured electrically and the position of flaws may at any time be located. The modifications of the different fuses depend in a great manner upon the type of generator of the current, as voltaic batteries, dynamo- and magneto-electric machines are used according to the position of the torpedo. CLEARING CHANNELS OF TORPEDOES. The greatest skill and care is necessary in attempting to clear a channel of mines and torpedoes. Light-draught boats, launches, gun-boats, drag-nets, grapnels, and materials for handling torpedoes at a distance of thirty or forty feet are indispensable. Torpedoes of the Brooks class may be dragged over many times and escape notice. The frame-torpedo requires the aid of counter-mines or large torpedoes extemporized and sunk on them to blow them to pieces. The shallow water both sides of the channel must be carefully and thoroughly dragged for leading wires. Boats on search must proceed with frames rigged from their bows to catch and explode torpedoes in advance. Deep-draught frames of timber must be dragged up or floated down a channel. Muddy bottoms must be thoroughly sounded, and after the search is complete deep-draught vessels cannot pass through suspected channels without torpedo-catchers rigged from their bows. Too close an examination of a torpedo after it is picked up must be avoided. It may almost invariably be easily and safely exploded, and no better disposition can be made of it. EXAMPLES OF THE USE OF TORPEDOES DURING THE PAST TWENTY YEARS. _Whitehead._ Sent from the British frigate Shah against the Peruvian iron-clad Huascar, May 29th, 1877. During the running fight between these vessels, the Shah discharged a Whitehead from a bow tube under water, which failed to reach the Huascar, the reason given being that at the moment of firing the latter changed her course. It is to be presumed that the torpedo in this case was carefully aimed, as there was no cause for great hurry. The Huascar could not be aware of the moment of firing, and the failure appears to demonstrate the great difficulty of using this type of torpedo between rapidly moving vessels at distances of eight hundred yards or over. Sent from Russian steam-launches against Turkish iron-clads off Batoum, December 28th, 1877. The Turkish vessels in this instance were lying at anchor, surrounded by booms of logs and vertical timbers, and having guard-boats out. The Russian launches succeeded in passing the guard-boats and approaching to within less than a hundred yards of the Turks before they were discovered. Two Whiteheads were then launched at one iron-clad, missing their mark completely, both being found on the beach, unexploded, next morning. The attributed causes of the failure were non-familiarity with the complications of the torpedo itself, darkness, and a slight swell. Sent from Russian torpedo-launches against a Turkish revenue vessel, January 26th, 1878. In this instance the torpedo-launches were entering Batoum harbor with the intention of attacking the iron-clad fleet, when they were met by a revenue steamer coming out. Whiteheads were discharged at a distance of less than one hundred yards, and the steamer was struck and sunk. The Lay torpedo has never been used in war. Towing-torpedoes were used on several occasions by the Russians against the Turks, but never successfully. _Spar-Torpedoes._ Attack by a steam-launch armed with a spar-torpedo on the Confederate iron-clad Albemarle, October 27th, 1864. The Albemarle in this instance was secured to a wharf and surrounded by a boom of logs at a distance of about thirty feet. The Federal steam-launch approached within one hundred yards of the boom without being discovered. Fire then being opened on her, she started ahead full speed, _passed_ the ram, and made a complete turn in order to get speed and direction for striking the boom a fair blow. Hitting the boom, the launch breasted it in several feet and mounted it, evidently coming to a stand-still. At this moment, and whilst under a close fire, the torpedo-spar was pushed under the ram and the torpedo was exploded fairly, thus sinking her. In this case success was due entirely to a cool and deliberate execution of a thoroughly developed plan. Attack by Russian launches armed with spar-torpedoes on the Turkish monitor Duba Saife, on the Danube, May 26th, 1877. In this attack the launches passed the guard-boats without being seen. The monitor was not protected by booms, and two launches, making a dash at her from opposite sides, planted their torpedoes fairly, exploded them, sank the monitor and escaped. Attack by Russian spar-torpedo boats on the Turkish fleet at Sulina, June 10th, 1877. There were six torpedo-boats arranged in two divisions in this attack, the two fastest boats leading. These leaders reached to within thirty yards of the Turks before being discovered. Fire was then opened on them. The first boat, coming down on the bow of one of the monitors, fouled her cable and swung alongside; her torpedo was exploded, but not being put in proper position no damage was done. The boat succeeded in getting clear, but was sunk by the Turks and the crew captured. The other boat succeeded in exploding her torpedo, but also failed to get it in position. The other division of boats did not follow up the attack. Attack on a Turkish monitor off Rustchuk by a Russian Thornycroft boat. In this attack the Russians approached very closely before being discovered. Fire was opened on the boat and the circuit-wires of the torpedo were cut, rendering it harmless; the boat escaped. Attack on Turkish monitors at Soukum Kaleh, August 24th, 1877. Four torpedo-boats, taking advantage of an eclipse of the moon, dashed into the Turkish fleet. They were discovered at a distance and a heavy fire was opened on them, driving them off. One boat exploded her torpedo, but it was not properly placed and did no harm. Attack by a spar-torpedo boat on the United States frigate Minnesota, April 9th, 1864. In this attack the Minnesota was unprotected; the torpedo-boat was discovered about fifty yards away and fire was opened on her. Her torpedo was properly planted and exploded, damaging the frigate considerably, but the charge was not heavy enough to sink her. Attack by a spar-torpedo boat on the United States corvette Housatonic, February 17th, 1864. The boat used in this attack was in reality a submarine boat, but there are good reasons for believing that on this occasion she was used as a spar-torpedo boat. She was discovered about fifty yards away, but there was no time to open fire on her. She planted her torpedo fairly and exploded it, sinking the vessel and herself at the same time. Besides these attacks there were several during the American civil war, in which the boats were discovered at a distance and driven off. PART IV. ARCHITECTURE AND CONSTRUCTION. [Illustration: American Revolving Turret (Ericsson’s System).] [Illustration: English Revolving Turret (Coles’ System).] [Illustration: French Revolving Turret.] [Illustration: French Barbette Fixed Turret and Revolving Gun Carriage.] UNARMORED FLEETS. ARCHITECTURAL DEVELOPMENTS. Ever since the introduction of steam propulsion in ships of war, England, France, and the United States have taken the lead in the development of types of naval vessels, and in examining the various methods followed it is necessary to at first fully understand the conditions under which each nation acted and the obstacles against which each had to contend. In Great Britain the navy has always been considered the main defence. Its support and development have for over two hundred years been considered of the first importance, and, in legislating for its maintenance, expense has seldom been spared. Since the Crimean war, no sudden strain has been imposed upon its administration tending to limit development to certain especial types. Experiments have been carried on with equal profusion in all types, from the line-of-battle ship to the gun-boat, and as each experiment resulted in the addition of a vessel to the fleet whose lifetime could be estimated safely at fifteen years, we find in this immense navy a most heterogeneous collection of ships, which it would be impossible to classify distinctly. Although this heterogeneousness is a certain sign of extravagance, it by no means follows that it is a sign of weakness in the fleet itself. In all this range of liberal experiment there has been but one point where Great Britain has been really hampered, and the true advantage of a certain amount of restraint is well exemplified in the superiority of development brought about by it in this instance. In order to keep the fleet constantly up to the standard in number of vessels, a greater expenditure of timber was required than could be supplied by home production. It was easily foreseen that in case of a foreign war no dependence could be placed upon a constant supply from abroad, and to remedy this evil we find Great Britain the first to utilize iron in ship-construction, and battling against the first and apparently insurmountable obstacles to carry iron ship-building to perfection, making it immeasurably superior to wood, and through its use extending the range of architectural development far beyond the old limits. In France there has always been a generous system of legislation for the support of the marine, but in this country the navy has never been considered of the vital importance to the safety of the nation that it has in England; consequently naval controllers have always been obliged to exercise a much greater economy in development, and the rigidly mathematical system of the French in the exercise of all control is nowhere better exemplified than in the development of their fleet. The ships of the fleet will be found most rigidly classified, each type being clearly distinct. Reconstruction and development is carried on as it were _en masse_ in accordance with the prescriptions of fleet programmes carefully studied out to meet the exigencies of the time, and once settled upon being rigidly followed to the end. It is on this account that the French are found as a rule backward in introducing radical changes of detail. Whilst keeping to their systems of classification, the French have kept close to the English in the matter of fleet strength. There has been one period in which France fell so far to the rear as almost to take third place in strength of fleet, whilst development ceased entirely. This was caused by the disastrous Franco-Prussian war, from whose effects the navy still suffers, although it has fully regained its former position close to that of Great Britain. In the United States, naval development has been constantly hampered not only by parsimonious legislation but by a constant legislative meddling, imposing a restraint far more injurious than lack of funds or the distractions of war itself. At no time has the strength of the fleet been sufficient to bear a comparison with that of either England or France, but in the matter of architectural development the United States has repeatedly passed to the front at a single stride. In spite, however, of the advantages gained, parsimoniousness and political meddling have invariably interfered to hold the navy fast at its single stage of advance until its first developments sank into insignificance beside the modifications and perfections applied in Europe. During the Crimean war American architects laid down a programme for an efficient steam fleet and led the world in the development of the steam frigate and corvette. Notwithstanding this start, the outbreak of the civil war in 1861 found the navy with but the nucleus of a steam fleet. Whilst sailing war-vessels had almost disappeared from European navies, giving place to steam types founded mainly upon the principles which had given American architects the lead, the bulk of the United States Navy was still composed of the old sailing frigates and sloops. The turreted iron-clad, the river gun-boat, and the rapid cruiser again showed the way to the world; but the close of the war brought demoralization to all systems of development. In 1865 the United States possessed a fleet fully able to protect the whole line of its immense sea-coast against foreign aggression; in 1870 the fleet was reduced to a handful of vessels that, whilst showing heterogeneousness equal to the English fleet, did not possess a single element of strength. At the date of the outbreak of the Crimean war, the building of sailing war-vessels may be said to have ceased throughout the world. Steam corvettes and frigates formed the bulk of the effective fighting fleets, whilst steam line-of-battle ships were being slowly introduced, as yet scarcely beyond the experimental stage. The introduction of steam propulsion and the advancement in the science of naval architecture had given rise not only to improvements in design, strength, and seaworthiness of men-of-war, but also to a gradual increase in dimensions of the different classes. The extent of this advancement is well shown in comparing the English line-of-battle ship Victory, Nelson’s flag-ship at Trafalgar, having a displacement of less than 2900 tons, with the _average_ displacement of English first-class frigates in 1854, which was not less than 2800 tons; the battery power of the frigates being more than twice as effective, steam-power being added, and handiness and speed under sail alone being much superior. Progress in this direction had been made to the extent that in 1854 the French had laid the keel of the Imperatrice Eugènie, a frigate of 3600 tons displacement, designed for a speed of 12 knots and a battery of 56 guns (five and six inch smooth-bores). At the declaration of war with Russia neither the English nor the French navy was in a condition to meet the suddenly created exigencies; both fleets were in a transition state from sail to steam. The necessity for steam-power on all ships was suddenly made forcibly apparent, and architectural development ceased almost entirely in the work of converting all the available line-ships and frigates of the old sailing fleet into steamers. This total extinction of sailing vessels as fighting war-ships made its effects felt across the ocean, and an attempt was made in the United States to create an efficient steam navy. With but a limited supply of funds for its creation, American architects were forced to study fully the necessities of the fleet before embarking on the new work. Since the foundation of the navy it had been always one of the principles of American construction to build ships whose measurement exceeded those of similar types in Europe. Carrying out this principle in the development of the new fleet, there appeared in 1855 four steam frigates superior in every way to any European vessels of their class that had yet appeared. The importance of these vessels did not lie simply in their excess of measurements over European frigates, but in the combination of all those parts which go to make up the efficient lighting vessel. The Imperatrice Eugènie with her 3600 tons displacement had surpassed previous frigate developments, but had made no impression on other types of vessels. On the contrary, the appearance of the Minnesota, Wabash, Colorado, and Merrimac was the signal for the disappearance of the line-of-battle ship. The displacement of these ships was about 4700 tons, or 1100 tons in excess of the Eugènie. The battery was of the same _number_ of guns as in the French ship, but exceeded by an inch in calibre that of any broadside afloat, the combination of numbers and weight giving these ships superiority even over three-deckers. Whilst the design of the Eugènie called for a speed of 12 knots, her coal supply was sufficient for but 1500 miles. The Americans, with a speed of 9½ knots, carried coal for 2500 miles. The sail-surface of these ships was enormous, ranging as high as thirty times the area of the immersed midship section. In 1858 a fifth vessel was added to this type (Niagara), the displacement in this instance being carried to 5500 tons, speed 12 knots, with a coal capacity for steaming 2500 miles, full sail-power, and a battery in which calibre had been carried to the extreme limit of broadside fire (11 inches). Whilst the French were engaged on their Eugènie type the English had laid down a type of 3000-ton frigates (Emerald class) which reached a speed of 13 knots. On the appearance of the Wabash in European waters, the English at once designed a type to surpass her, and completely overshot the mark in the Mersey and Orlando, in which displacement was carried to 5600 tons; but in the attempt to realize a speed of 13 knots, they gave the vessels proportions that were unfit for wooden construction. With their profusion of experiments, however, we find between 1857 and 1860 a succession of types ranging from 2500 to 4600 tons, the majority averaging about 3800 tons. In these ships may be seen the constant search to find the one combination that shall possess all the excellences. All of these vessels were thorough cruisers, and in no case except in the Mersey type do we find the experiment resulting in worthlessness; still, an examination of the frigates will show the impossibility of giving a distinct classification to them. Beyond the Crimean war it has been already stated that the development of the line-of-battle ship had scarcely passed the experimental stage, and after 1857 the sudden increase in power of the frigate, combined with the introduction of the sea-going iron-clad, stopped almost entirely the development of this type, although their construction was carried on until 1860. In France a new fleet programme was laid down in 1857, in which the heavy American and English frigates were entirely ignored, and whilst new frigates of the Eugènie type were built almost without change, the increase in vessels of this class was confined almost exclusively to lengthening and converting the old frigates of 2500 tons into steamers of 3000. Development of wooden ships was found only in the corvette class. The reason for this independent departure was, in all probability, due to the original start made by France in the development of the iron-clad frigate in this same year, combined with a dissatisfaction on the part of the French with the speed realized in the Wabash and Orlando. In 1858 the United States Navy put forth a type of vessel new in every particular, and one whose value, although not immediately recognized, has by its development become the true standard for effective medium unarmored cruisers. The Hartford, Brooklyn, Richmond, and Pensacola combined all the advantages of both the second-class frigate and the sloop-of-war. With a displacement of 3000 tons, which placed them in a line with light frigates, their steam-power was fully developed, whilst steaming capacity and sail-power were kept at a maximum, and strength of battery combined, in the best manner, calibre and number of guns. In the civil war, which soon followed, no class of vessels proved itself of so much fighting value as this. These vessels formed a distinct class in the navy, and contemporaneously with them appeared a third and lighter class (Iroquois, Wyoming, Mohican, and Narragansett), with a displacement ranging from 1600 to 1900 tons. In France this latter type had appeared in the navy at the same time, the Cosmao and Dupleix, with a displacement of 1800 tons, realizing a speed of nearly two knots greater (12 knots), whilst steaming capacity and sail-power were the same, and the battery was inferior in about the same proportion as the speed was superior. In England the development of this class was an extension of the old steam-sloop, realizing in the Challenger and Barossa type a displacement of 2350 tons, with the disadvantages of excessive draught of water, lack of development of speed and steaming capacity. No better evidence of the complete demoralization of architectural development in the United States can be found than in the movement made in 1872, in which the Hartford class, after having established thoroughly its great utility, was by the addition of a spar-deck reduced to the plane of the Challenger, with increased draught, reduced speed and steaming capacity, and in fact a reduction of all the qualities which had rendered it superior, notwithstanding the total disappearance of the type not only in the English but in all foreign navies. During the Crimean war a great number of gun-boats, ranging between 500 and 800 tons displacement, had been hastily but well constructed, and the type was continued after the war until 1860 almost without change. The same types with but slight modifications were contemporaneously introduced in France, those of the French Navy, as a rule, possessing a superiority in speed of about one knot. With the Immortalité frigate, the Challenger sloop, and the Britomart gun-boat, the development of wooden war-vessels ceased in England in 1859, giving place to composite and iron construction. In 1860 a new range of types appeared in the French Navy, the prominent feature throughout being the extreme development of speed and steaming capacity, combined with medium sail-power and a minimum battery-power, although here the French introduced the rifled gun as an offset to the heavier calibres of American smooth-bores, the primitive type of the rifle leaving it inferior to the latter in power. In the first rate appears a development of the English Challenger class. ========+========+=============+======+===================== RATE. | NAME. |DISPLACEMENT.|SPEED.| BATTERY. --------+--------+-------------+------+--------------------- | | Tons. |Knots.| First |Venus | 2,700 | 12.7 | XIV 6½-inch rifles, | | | | VIII 6-inch smooth. | | | | Second |Decrès | 1,770 | 12 | II 6½-inch rifles, | | | | IV 5¾-inch rifles. | | | | Third |Talisman| 1,300 | 12.4 | II 6½-inch rifles, | | | | IV 4¾-inch rifles. | | | | Gun-boat|Adonis | 730 | 9.3 |IV 4¾-inch rifles. --------+--------+-------------+------+--------------------- The corresponding new types of the United States Navy as they appeared in 1862, excluding the frigates, although the Franklin appeared after this date as the last of this type, were: ========+==========+=============+======+===================== RATE | NAME. |DISPLACEMENT.|SPEED.| BATTERY. --------+----------+-------------+------+---------------------- | | Tons. |Knots.| | Hartford | 2,900 | 10.5 | II 11-inch, | | | | XVIII 9-inch smooth, | | | | I 5¼-inch rifle. Second +----------+-------------+------+---------------------- | | | | |Shenandoah| 2,100 | 12 | II 11-inch, | | | | VIII 9-inch smooth, | | | | I 5¼-inch rifle. --------+----------+-------------+------+--------------------- | | | | Third | Iroquois | 1,575 | 10 | II 11-inch, | | | | IV 9-inch smooth, | | | | I 4½-inch rifle. --------+----------+-------------+------+---------------------- Gun-boat| Saco | 900 | 9.5 | IV 6½-inch smooth. --------+----------+-------------+------+--------------------- From these lists the aims of the constructors in France and the United States may be seen. In the former, displacement was kept at a medium whilst speed was developed to the extreme, the balance in battery-power being sought in the introduction of rifles. With the latter, displacement and battery-power were carried to the extreme, speed being sacrificed, although in this respect great attention was paid to retaining fine under-water lines and a maximum of sail-power. From 1860 to 1873 an interregnum in the development of French wooden types occurs corresponding to the length of time intervening between the fleet programmes. At the outbreak of the civil war, the Hartford, Shenandoah, and Iroquois types were being built upon slowly, with every prospect of completing a small but compact and efficient cruising fleet. Whilst, however, this fleet had been designed especially for ocean cruising, the unforeseen exigencies of this war demanded the immediate introduction of a type of light-draught gun-boats for river service, as well as an immediate increase in the numbers of vessels for blockade duty. During the first two years blockading and river vessels were extemporized from whatever material could be found in the merchant service. It was this war, however, which gave birth to the Saco type of gun-boats, these vessels being of a greater tonnage and better fitted for blockade duty on the open coast than the gun-boats of foreign types. Although the vessels of this type, hastily constructed and of poor material, were completely worn out in five or six years’ service, the type was renewed and has remained in the service. Two types of river gun-boats, both of which passed out of existence with the war, demand attention from their great usefulness. The first of these was the ordinary river ferry-boat. These vessels, having a displacement of less than 300 tons and a draught of water of seven feet, possessed two valuable qualifications for river fighting. They were built to run either end foremost with equal facility, their speed being moderate and manœuvring qualities excellent. Their decks, intended to carry heavy moving weights, needed no especial bracing to prepare them for heavy batteries. These ferry-boats, without undergoing any transformations except those made necessary for the proper accommodation of the crew and the manœuvring of the guns, carried successfully throughout the war heavier proportional batteries than any vessels afloat before or since. The type itself, enlarged and modified so as to permit the vessel to do cruising duty as well as river service, appeared in 1863 in what was known as the double-ender, a vessel standing between the gun-boat and the second rate, but not to be classed with the regular third-rate cruiser. The total ruin of American commerce, brought about by the depredations of half a dozen Confederate cruisers, led to the introduction of four new types of ships, and in these types American constructors sought in general to realize the maximum of speed without reducing any of the other qualities. The first of these (in point of rate) was designed entirely with a view to securing the highest possible speed and steaming capacity, all other qualities being made subordinate. The displacement of this type was between 4800 and 5000 tons, ranging about 300 tons higher than the frigates of 1855, and they were designed for a speed of 17 knots, with a steaming capacity of 5600 miles at 10 knots. The speed alone was realized. The ships themselves being built of white oak rotted almost before they could be launched; the frame was not of sufficient strength to resist the powerful working of the engines or the wear and tear of cruising, failing in this particular as the English frigates Mersey and Orlando had in 1858. The consumption of fuel was beyond the calculations, reducing the steaming power to less than 3500 miles. The second type was that of a fast frigate, or more properly first-rate (Piscataqua), in which strength of battery and sail-power were raised to their old proportions with regard to the displacement. The displacement of this type was 4000 tons, battery 25 nine-inch smooth-bores, and speed 12 knots, with a steaming capacity of 3000 miles at 10 knots. These ships were also built of white oak and soon rotted, and their general unhandiness combined, with the great expense of keeping them in commission, caused the type to drop out of existence. The third type (Congress), having a displacement of 3000 tons, came nearer to the requirements of a large fast ocean cruiser than either of the others, proving fast under steam or sail, handy, and carrying a well-proportioned battery. This type died out with the others in the general demoralization following the reduction of the fleet after the war. The fourth type (Plymouth), having a displacement of 2400 tons, with a battery of 12 guns and a speed of 12 knots, was in reality a development of the Shenandoah class, having for an increase of 300 tons a gain in battery proportional, and a maximum of speed both under steam and sail without any increase of draught. Of the four types, this one alone, which was a development of the Shenandoah class, the latter being modified from the Hartford, was the only real step in advance; but even this type has passed from the active list at present. Between 1865 and 1873 England was the only country in which real development was carried on. The French, keeping closely within the limits of their programme, were engaged in developing speed and testing subordinate modifications in the lower rates of their vessels. By this is meant such modifications as testing the value of the topgallant forecastle, leading to its adoption in all rates; the suppression of the poop-cabin, the test of the long ram bow for furnishing additional buoyancy forward, the merits of double and single screw propulsion, etc.—particulars which were subordinate to the main architectural development. The United States Navy from 1865 to 1873 passed through a period of uninterrupted decadence. Millions were spent in the futile effort to patch up the fast-rotting fleet of white-oak ships that had been hastily constructed during the war, while not a single attempt was made to benefit by the rapid development of the English. Between 1860 and 1866 English attention had been almost exclusively turned to the development of the iron-clad fleet; that of the unarmored fleet consisted almost entirely of experiments in composite and iron construction, bringing out no new types, but perfecting constructional development. In the latter year, however, directly following the appearance of the Wampanoag, the same course was followed as with the Wabash ten years before. Before the world had had time to form any judgment with regard to the real value of the type, the lines of the Inconstant were laid down and the ship was pushed rapidly to completion. In this case the development of iron construction saved England from the blunder committed in 1858 with the Orlando. It was the American vessel that had overshot the mark in measurements for wooden construction. The English turned out a seaworthy ship, but her real utility is questionable owing to her unhandiness and the expense of keeping her in service. The displacement of the Inconstant is 5800 tons, battery ten 9-inch and six 7-inch rifles, speed 16 knots, and steaming capacity 2160 miles at 10 knots. The Americans attained superior speed and steaming capacity by a sacrifice of battery-power. The English attempted to realize all the qualities. At the same time two other fast cruisers approaching the rate of the Congress were built (Volage and Active). Between 1870 and 1873 is seen the same search amongst dimensions to find the ones which will best satisfy the demands of speed, steaming capacity, and battery-power. The Shah, Raleigh, Boadicea, Bacchante, Euryalus, and Rover, ranging in displacement from 3500 to 6000 tons, overshooting the mark at first, and apparently best satisfied with dimensions falling between the Piscataqua and Congress types. All of these ships belong more properly to the Piscataqua than to the Wampanoag type; the latter appearing fully developed in the Iris and Mercury, in which, as in the Wampanoag, all is sacrificed to speed. The modifications in this case consist, first, in the steel construction, giving a strength of frame sufficient to withstand the engine-power; second, the reduction of dimensions, giving a displacement of 3700 tons; third, the increase in speed to 18 knots. In France is found, on the programme of 1873, provision for first-rate fast cruisers; accepting the necessity for this development of the general frigate type, this country deliberates and studies the birth of the type in 1865 in the United States, its development for six years in England, and finally crowns the English modifications with what to-day must be regarded as the most perfect development of the Piscataqua and Shah type. The Duquesne and Tourville have a displacement of 5400 tons, speed of 17 knots, and steaming capacity of 5000 miles at 10 knots. In these ships France borrows the English constructional development of iron sheathed with wood, while by an excellent arrangement she secures a full battery-power with an almost perfect command. Next in order of rate in England, but last in development, is what is known as the C class of corvettes. Built of steel, with a displacement of 2380 tons, they truly represent the last development of the type whose foundation was the Hartford, and this type is apparently as great a favorite in the English Navy as the Hartford in her day was in that of the United States. In France the second-rate of the programme of 1873 is a distinctly new type. The Duguay-Trouin in one respect is a departure from French custom, her dimensions being carried to the maximum for this rate, giving her a displacement of 3200 tons, which is an increase over her own immediate predecessors of 1200 tons. Her battery-power is if anything lighter than the proportional French average and below that of the English and American vessels of lighter displacement. She is designed for a speed of 16 knots and a steaming capacity of 3500 miles at 10 knots. The main architectural peculiarity of this vessel is the arrangement for securing great command of fire. Her battery is all carried on the upper deck, whilst she has a clear flush main-deck; the opening of fore-and-aft fire by carrying the gun-platforms beyond the upper-deck rail is also a modification. Contemporaneously with the Duguay-Trouin the Americans introduced a new type which comes nearer a modification of the Raleigh than any other class, although it springs directly from the attempted modification of the Hartford class referred to above by which spar-decks were added to them. The present Hartford, with her spar and main decks, and the development of the type in the Trenton show two ships wherein is well exemplified the absurdity of, as it were, putting new wine into old bottles. The Trenton has a displacement of 3900 tons, a battery of eleven 8-inch rifles, and a speed of 13 knots, with a steaming capacity of 3500 miles at 10 knots. In this ship, as in the Trouin, the dimensions of the second rate are carried to an extreme, although in this case the Americans hold fast to the idea of combining moderate speed with a maximum of battery-power and general cruising qualities. The Hartford, however, having proved herself possessed of all the excellences of her day, and these excellences having been secured by a wise distribution of architectural elements, was sacrificed to the crude development of a new type by the addition of a new deck. Although these two ships belong to the same type and rate, no comparison can be instituted between them, and at the very time that the English perfect the Hartford type in the C class of corvettes a blunder of the Americans disrates the original. Below the C class in England appeared the Opal class of 1900 tons, a modification of the earlier Blanche type corresponding and following close after the American Plymouth type. At the same time a corresponding type appeared in France and the United States. In the former the Rigault de Genouilly has a displacement of 1640 tons, an increase of 400 tons over her immediate predecessors, a battery of eight 5½-inch guns, and a speed of 15 knots, with a steaming capacity of 4000 miles at 10 knots. In America the Marion has a displacement of 1900 tons, a battery of one 8-inch and seven 5½-inch guns, and a speed of 12 knots, with a steaming capacity of 2500 miles at 10 knots. The French in this class show the same difference in qualities from the English and American types that appeared twenty years before. The English development closes with the gun-boats whose types come more directly from those commenced during the Crimean war. The displacement of these vessels ranges from 400 to 900 tons, with a diversity that scarcely admits of a distinct classification. The American gun-boats are reductions of the Iroquois class of corvettes, exceeding the English in average displacement, or rather showing no types below 500 tons. The French gun-boats are more closely allied to English than to American types, although there is but little difference between the three, the English showing greater diversity, the Americans greater measurements, and the French greater precision of rating. [Illustration: _Chart of Architectural Development.—Unarmored Vessels._] CONSTRUCTIONAL DEVELOPMENT. Previous to 1857 wood construction was universal in the building of war-vessels. About this date England introduced iron frames in her first armored vessels, passing rapidly to the full development of iron construction in armored ships, composite construction in the medium and light classes of unarmored vessels, and iron or steel sheathed with wood in the first and second unarmored rates. By 1867 the old wood construction had been entirely discarded. [Illustration: French Corvette La Clocheterie. (Wooden System.)] [Illustration: United States Corvette Plymouth. (Wooden System.)] In France the wooden construction was almost exclusively used until the development of the programme of 1873. Iron was then introduced in the armored hulls, iron sheathed with wood in the first and second rate unarmored ships, and composite construction in the gun-boats of less than 700 tons, leaving the light second-rates and the third-rates to the old wood construction. In the United States the wood construction is still invariably followed. There are no composite vessels in the navy, nor has any attempt been made to build one. There are two or three iron vessels of 1000 tons displacement, built during the period of greatest demoralization, and on account of political pressure brought to bear in the interest of iron merchant-ship building. These vessels can scarcely be pointed at with pride, since, throughout the naval world, pure iron construction is found only in transports and troop-ships. In England, where iron ship-building had its birth and development, constructors have never proposed this very excellent type of _merchant-ship_ construction for war-vessels. _Wooden Construction._ The keel in the wooden construction is sided to a certain proportion to the beam of the vessel, the pieces composing it being generally connected by a plain scarf, the stem carrying the form up forward being hook-scarfed to the forward end of the keel and supported by the timbers of the deadwood and apron, forming a solid mass at the fore-foot. The stern boundary is carried up in the main stern-post, which seats with two tenons on the after-end of the keel, being supplemented in some vessels by a rudder-post, but generally in the larger classes of vessels the latter gives way to the equipoise rudder. The angle of the stern-post and keel is made up into a solid supporting mass by the after-deadwood. The junction of stern-post and keel is further strengthened by bronze castings bolted on each side. The keel is rabbeted each side to receive the garboard strake of planking, and the stern-post and apron prolong the rabbet at either end for the hooding-ends of the outside planking. The floor-timbers cross the keel, giving an alternate long and short arm on either side, the frames being carried up by futtocks and top-timbers shifting butts. Over the floor-timbers in the plane of the keel a heavy keelson is laid with, generally, sister-keelsons on each side, the system of keel and keelson forming the rigid back-bone of the ship. The longitudinal supports of the ship are the boiler-keelsons, parallel to the main-keelson and forming the supports to the boilers; the diagonal bracing, composed of iron ribbons of about three fourths of an inch in thickness, crossing each other at an angle of 45°, and forming a complete lattice-work for the ship extending from the spar-deck to the turn of the bilge. These braces are generally worked on the inner side of the frames, but in certain cases they have been worked on the outside or on both sides. The inner planking, formed of the thick strakes, bilge-strakes, and ceiling; the deck-clamps, ranges of heavy plank for the support of the ends of the beams; water-ways, covering the beam-ends and corresponding to the deck-clamps underneath; and the outside planking. [Illustration: Diagonal Braces.] The transverse supports are the beams with their connecting systems of knees and carlings, the breast-hooks and transoms, and finally the decks themselves, which furnish both longitudinal and transverse support. Of late years it has been the custom to make the beams, knees, breast-hooks, and transoms of iron, and it is a very general idea amongst those who have not paid especial attention to the subject that this modification, taken in conjunction with the introduction of diagonal braces, constitutes composite construction, which is by no means the case. In the wooden construction the American and the English systems are very closely allied, whilst the French differs from both in many details. These differences are, however, in the detail work, a description of which would be scarcely warranted in the general summarizing of a system. The outside planking is made up of a series of strakes differing in thickness of plank in accordance with the points at which the greatest strains are brought by the motions of the vessel. Next the keel on each side, and tending to give it thorough support, are ranges of plank firmly secured in the rabbet of the keel and thicker than the planking in general, called the garboard strakes. Outside of the gun-deck beams is another range of heavy planking called the main wales, and in two and three decked vessels other strakes called middle wales are worked abreast the other beams. In the same way a great longitudinal strengthening is gained in the deck-planking by the outer range of planks next to the water-ways, called the thick strakes. It is considered that all these points are generally understood, and they are simply referred to on account of the necessity of bearing them in mind in following the developments. _Diagonal Construction._ This system of construction is found only in the English royal yachts and in their heavy wooden steam and sailing launches, but it is the opinion of an eminent English naval architect that had it not been for the very general introduction of iron in ship-building it would probably have taken precedence over the ordinary wooden construction. Its only objectionable feature is its expensiveness, while it is much superior in point of lightness and structural strength. Whilst in the ordinary wooden construction the weight of hull ranges between 46 and 54 per cent of the displacement, it is reduced in the diagonal system to between 32 and 40 per cent. [Illustration: Diagonal Construction.] In this system the keel, keelsons, stern and stern posts, and floor-timbers are similar to the ordinary construction. The heavy frames, however, stop with the floor-timbers, and there is no diagonal iron framework. The outer and inner planking of the ship are the same as in the old construction except that the thick strakes of outer planking forming the wales are done away with, retaining only the heavy garboard-strakes. In place of the futtocks and top-timbers of the old construction a double course of diagonal planking is introduced. That part of the inner planking which covers the floor-timbers is of the ordinary thickness, whilst beyond the timber-heads the planking is increased in thickness to give a smooth turn to the bilge ceiling. These four or five strakes are rabbeted into each other and into the timber-heads. The clamps and water-ways are as in the old type. In order to give transverse strength to this system, the knees are constructed in a peculiar manner. The lower leg of the orlop-deck hanging knee is carried down beyond the head of the floor-timber. Every other knee is forked, giving a housing to the beam-end, the two legs following the curve of the clamps and water-ways and rising with a spread of half the height between decks and beyond the foot of the hanging knee over it. This system of construction has found great favor in England in the construction of yachts, and it has been very successfully applied to sailing merchant-ships and steamers. _Composite Construction._ [Illustration: Jordan’s Composite Construction.] The object of this construction is to combine, as far as possible, all the advantages of the wooden and the iron ship. There are three main systems of English types ranging from a close approximation to the wooden construction to that of the iron sheathed with wood, which latter forms the connection between composite and iron construction. In McLain’s system, which is the closest approximation to the wood construction, the keel, stem and stern posts, frame, and outer planking are of wood. The ceiling or inner planking, however, is of iron, forming a complete iron inner skin; the beams, knees, stringers, keelsons, transoms, and breast-hooks being also of iron. The wooden frames are of a smaller scantling than in the wooden system, being supplemented by angle-iron frames, by means of which the iron skin is secured to them. The outer planking bolts directly to the wooden frames, being kept entirely clear of the iron inner hull. In Jordan’s system the frames are entirely of iron, inner and outer skins being of wood, whilst the keelsons, stringers, and transverse supports are of iron. In Scott’s system the frames are made of T-iron instead of angle-iron as in Jordan’s system, and a modification is introduced by which the frames are spaced much farther apart. Between the frames oak or teak chocks are fitted, bolted to the frames and calked throughout, thus forming a complete water-tight course. These are the main types as represented in England. In Russia is found another system which, doing away with diagonal braces, which it must be remembered are used with all the systems just described, makes use of the McLain system in connection with Mr. Scott Russell’s method of longitudinal strengthening. In this, the keel, stem and stern posts, and outer planking are of wood, whilst the frame is of iron with an iron skin outside of it, which in general terms would class the type with that of iron ships sheathed with wood. To the outside of this iron skin Z-iron stringers are bolted, the space between them being filled up by chocks to form a complete wooden sheathing. These chocks are made shorter than the spaces, and are wedged in their seats. Outside of this sheathing is run the wooden outer planking in the ordinary way. It will be seen by the descriptions following that this system can scarcely be classed as a true composite. [Illustration: Scott’s Composite Construction.] [Illustration: McLain’s Composite Construction.] [Illustration: Russian System.] [Illustration: French Gun-boat Crocodile. (Composite.)] [Illustration: French Transport Annamite. (Composite.)] The French system as applied in their light gun-boats has the same wooden outer skin, with the ordinary iron frame. The outer planking is double, gaining great longitudinal strength by breaking seams. There is no diagonal bracing. This system of outer planking is the one used in the English Navy. In the French transports of the Annamite class a system of alternate framing is followed, with wooden ceiling and double outside planking. In these vessels additional longitudinal strength is gained by the use of heavy iron box-stringers in place of the ordinary water-ways. _Iron Construction._ In tracing the development of iron construction it is necessary to pass from the consideration of unarmored vessels to the armored types, as the pure iron construction is limited almost exclusively to these vessels. The advantages of iron over wood may be summed up as being, 1st, lightness combined with strength; 2d, durability when properly treated; 3d, ease and cheapness of construction and repair; 4th, safety when properly constructed and subdivided. Its disadvantages are: (1) easy penetration of the bottom by rocks or by other pointed substances; (2) fouling of the bottom and consequent loss of speed; (3) the immense holes made, not only by taking out solid pieces, but, what is worse, the long rents or tears made by a penetrating shot through the thin side-plates and frames. Fast cruisers cannot be built of iron alone on account of the fouling, and the smaller the ship the greater the harm from this cause. War-vessels of any kind are excluded from this construction on account of the vulnerability of the sides, combined with the impossibility to stop a shot-hole which is starred with long rents. In the heavy iron-clad, however, the third disadvantage is done away with by the application of armor. The second is partially overcome by the surplus engine-power, and the first is neutralized by the double bottom, wing passages and compartments which the large roomy hull allows to be introduced. The Brazilian iron-clad corvette Brazil, although built as late as 1866, is a good example of the primitive iron construction as applied to vessels of war. The keel of this vessel is what is known as the solid-bar type, the plates forming the garboard-strakes turning down on each side of it. The frames, made of upper and lower angle-irons strengthened from the amidship line to the turn of the bilge by a deep web, abut against an interior keel formed of a single plate surmounted by a flat plate-keelson, the frames, keels, and keelson being thoroughly bound together by angle-iron. The stem is scarfed into the keel, rising as a continuation of it and being rabbeted for the reception of the bow-plates. The main longitudinal strengthening consists in an iron bulkhead rising from the bilge to the under side of the main-deck and running fore and aft, forming water-tight wing passages. Just outside of the edges of the plate-keelson is what is called an intercostal longitudinal frame, consisting of short plates between the webs of the frames and secured to them by angle-irons; these frames run fore and aft. In addition to these longitudinal supports, a wide stringer-plate is carried along underneath the water-ways of both decks. In the formation of the armor-shelf, the exterior angle-irons of the frames, turned back along the edge of the web, form the shelf, while the interior angle-irons are carried up unbroken to the plank-sheer. The plating is the system generally applied of every other plate lapping on both edges. [Illustration: Brazil.] [Illustration: Warrior.] In the Warrior the solid-bar keel gives way to the plate-keel, which in this case is double, the garboard-strakes butting against the edges of the internal plate, while the external one laps well over the joint. The continuous internal keel is found in this ship similar to the Brazil, secured by angle-irons to the inner keel-plate and the broad plate-keelson. The lower angle-irons in this case are continuous, while the upper ones are in short lengths, permitting the upper angle-irons of the _frame_ to pass across and form a continuous length from plank-sheer to plank-sheer. The web of the frame is here shown increased in depth to a maximum, being lightened as far as possible by circular sections cut out. The assemblage of a frame consists of the continuous inner angle-irons, one on each side of a narrow strip to which the deep web-pieces are bolted, and the lower angle-irons bounding the webs. In the Warrior will be noticed six longitudinal frames similar to the continuous inner keel, and it will be noticed that the third of these frames, forming the seat of the wing-passage bulkhead, and the sixth, running along the outer edge of the floor-plates, project beyond the angle-irons of the transverse frame, being slotted to permit these angle-irons to pass them. The wing-passage bulkhead forms another longitudinal support, extending fore and aft from the turn of the bilge to the lower side of the main-deck. The armor shelf-plate in this instance consists simply of a broad plate bent at right angles and secured by angle-irons to the inner plating. This is a noticeable feature, as the extreme strain on the plate in the sharp bend is a plane of weakness. [Illustration: Bellerophon.] The Bellerophon shows the same arrangement of keel and keelson with the addition of wooden bilge-keels secured lightly to the bottom plates by angle-irons. The framing of this ship, however, is of the type known as the bracket-plate system. The features of this system are the adoption of a double bottom and of angle-irons connected by bracket-plates instead of by solid forged iron-work. The web of the frame in this instance is much deeper, giving a large space between the outer plating and the bottom formed by plating the floor edge of the transverse frames. In the Warrior it will be noticed this plating only extended to the third longitudinal on each side, while in the Bellerophon it reaches to the wing-passage bulkhead. The transverse inner angle-iron is continuous from bulwark to bulwark, the outer one being in short lengths to allow continuous longitudinals. The upper angle-irons of the longitudinal frames notch down over the transverse frames, while the lower ones are continuous. The spaces between the bracket-frames lighten the assemblage a great deal, while the longitudinals, being of continuous plate like the inner keel, are lightened by having holes cut in them. In this manner large water-tight compartments are secured; for the inner keel, the third longitudinal, and the wing-passage bulkhead longitudinal are solid. The web just underneath the armor-shelf is of the old-style solid plate, to give better support than would be gained by bracket-plates. The double-bottom arrangement continues throughout two thirds of the length of the ship, the frames outside of this being reduced in dimensions. The armor-shelf of the Warrior proving a weak construction, that of the Bellerophon was better worked. The outer angle was formed by an angle-iron bolted to the vertical outside plating, and to a flat plate forming the armor-seat, the iron being on the inside of each plate. This left an open joint between the lower edge of the plating and the upper edge of the side-plate, but the joint is one easily calked. [Illustration: Filled Wing-Passage of Hercules.] [Illustration: Floor of Hercules.] In the Hercules the bracket-plate system is quite similar, and additional strengthening was put in by partially filling the wing-spaces with a strake of heavy teak backing. Two box-keelsons were also run on each side of the main keelson, and the main keelson itself was strengthened by being carried up above the floor and braced by brackets on each side. The armor-shelf in this instance was also slightly modified. In the Invincible the wing-passage and its bulkhead is done away with, and in place of it the web of the transverse frame is deepened considerably, carrying the double-bottom arrangement up to the armor-shelf; and whilst retaining a good depth as security against the outer skin being broken by ramming, much space is gained in the hold. These ships, being constructed for ramming, require a firmly braced stem. The stem itself is a solid forging, and attaches to the flat keel by a plain scarf, the outer keel-plate being carried some distance farther along the turn of the fore-foot than the inner one. The whole length of the stem is deeply rabbeted to receive the forward ends of the side-plates and armor, which all house in it. For a distance of forty or forty-five feet from the bow the bottom plates are doubled to give additional stiffness, each plate housing in a separate rabbet. The rear side of the stem is cut square, the breast-hooks seating fairly on it. Stern-posts are now invariably made in single solid forgings, and are plain scarfed to the keel as with the stem. Compartment bulkheads form an element of great transverse strength. There is no fixed rule for their application in war-vessels, but the usual number is seven. Of these, one is placed well forward, called the collision bulkhead, another is far enough aft to just enclose the screw-shaft stuffing-box, two others are respectively forward of the boilers and abaft the engines, and the others divide the remaining space as is best suited. Above the water-line, doors of a sufficient size to render free passage are worked in the bulkheads and are on hinges having clamps by which they may be screwed up water-tight. Below the water-line the doors slide either horizontally or vertically, being worked by gearing on the main-deck. The wing-passages are provided with small sliding doors generally kept closed. The compartments of the double bottom are connected by sluice-valves worked from the main-deck. These points constitute the main peculiarities of iron ship-building as it is at present carried on. There are constant modifications made in details, many of which are of the greatest importance, but a description of them would be out of place except in a work on iron ship-construction. _Iron Sheathed with Wood._ It has been stated that in no navy (except that of the United States) are there to be found iron ships of the pure construction. When iron ship-building was first introduced in England, two iron sloops were laid down and experiments were carried on with targets representing their sides, to find out the effect of shot upon them. The frames of these vessels were spaced only one foot apart, and it was found that a very serious amount of splintering took place when a shot penetrated. It was also found that for thicknesses beyond half an inch the projectile was broken to pieces on contact. This advantage for iron was, however, soon counterbalanced by the rapid increase of calibre, change to rifled guns and high velocities, and the introduction of steel and chilled projectiles. The great advantages offered by iron construction, however, rendered its introduction an absolute necessity when it became a question of speed. The rapid fouling of bottoms, with its consequent loss of speed, could only be overcome by coppering, and this necessity introduced another and far more serious difficulty, that of galvanic action. The introduction of the system of sheathing iron with wood is due directly to Mr. Grantham, an English builder. The main principles laid down by him were to have widely spaced transverse frames, and on the exterior of the iron skin to work a system of angle-irons which should in themselves bring up the strength of the hull to the standard, making up for the loss by wide spacing. The iron skin having been covered with pitch, a wooden filling was introduced between the angle-irons, wedged solid so as to form a complete wooden casing. Over this was placed a layer of tarred paper, and then the sheathing proper of the ship was fastened by brass screw-bolts to the wooden filling, completely insulating the iron hull. This sheathing could then be coppered. These exterior angle-iron frames, being worked as a support to the inner ones, take, as a rule, an opposite direction. Thus if the main inner frames are transverse, the exterior ones are longitudinal, and vice versa. Grantham’s method is in reality the one shown in the description of the Russian composite system. The English Admiralty method is somewhat different. Here the sheathing is in two thicknesses, the inner course being tap-bolted to the iron skin, the bolt-heads being sunk well into the planks and covered with pitch. The outer course shifts seams and butts with the inner one and is secured with brass screw-bolts. Over this course comes the copper. The Admiralty system is the one followed in France in the construction of the first and second rate fast cruisers. The difficulties of insulation are not yet solved by any means. Could the sheathing be absolutely excluded from moisture the system would be perfect, but as yet no means have been devised by which the wood can be prevented from becoming wet and thus serving the part of the porous jar in a voltaic cell. In examining and discussing different systems of construction it is necessary to always keep in mind the great distinctions between composite, iron, and iron sheathed with wood. Those who cry down the wooden construction, in view of the rapid deterioration of the American unarmored fleet, must bear in mind that this fleet was constructed of the worst possible material. In discussing the advantages of the composite system, those of the diagonal system must not be lost sight of. Above all, it must be remembered that the disadvantages of the pure iron construction, as evidenced by English and French target experiments, have never been overcome. The iron and steel sheathed with wood is an amelioration, but as yet it is by no means a satisfactory one. Although England has totally discarded the wood construction, it must be remembered that France holds her own with but a partial introduction of iron and composite in her highest and lowest rates. The subject of constructional development is still in its experimental stage, and to those nations who, unlike Great Britain, cannot depend upon legislative support and sympathy, nothing is more dangerous to the healthy development of an efficient unarmored fleet than a hasty adoption of a new constructional type. ARMORED VESSELS. ARCHITECTURAL DEVELOPMENT. It would be useless to attempt to assemble in chronological order the many propositions that have been submitted to or even entertained by different maritime governments looking towards the building of armored vessels. The first serious attempt made and effectually carried out was by France in 1855, when there were built five floating batteries carrying an armor of five inches, which, although almost totally unmanageable from their bad lines and realizing a speed of but four knots, went into action on the 17th of October in that year and silenced the batteries of Kinburn. These vessels taught nothing with regard to architectural development, but at the instance of France the English Government built nearly at the same time some vessels quite similar, and the attention which this movement caused led to a consideration of the suggestions of Captain Coles, who, in the same year, sent into action the little cupola vessel Lady Nancy. Had it not been for the dire necessity for an armored vessel to hold the Merrimac in check, Ericsson would not have won for the United States the credit of introducing the monitor type of vessel. Whilst he was designing the lines and arrangements of the Monitor, Coles was engaged in almost precisely the same work for the Danish Government, designing the Rolf Krake. From the successful work of the French floating batteries that government passed at a stride to the Gloire, laid down in 1858. Scarcely was this vessel’s frame up before the keel of the Warrior was laid in England. In designing these two ships the honors of development are divided between the countries. England introduced iron ship-construction, France combined thickness and disposition of armor as well as dimensions of vessels which required the least change as development progressed. Before the end of 1862 all Europe had been aroused to the new marine development. France and England already possessed iron-clad fleets, whilst Spain, Italy, Austria, Denmark, Russia, Holland, and Sweden were ordering ships wherever they could be obtained. In the United States a powerful fleet of monitors and armored river gun-boats was being rapidly formed, whilst to this country the eyes of the world were turned for the actual warfare tests of the new idea. In England the development of the broadside sea-going iron-clad extends from 1858 to 1867. Commencing with the Warrior, there is a gradual increase in dimensions until the maximum of unwieldiness is reached in the Minotaur, the false development ceasing at her and falling back in the Bellerophon and Lord Warden, the last of the pure broadside type, to nearly the dimensions laid down by the French at the commencement of their work. In disposition of armor the English departed in the same manner from true development. Commencing with simply an armored battery in the Warrior, altering to a fully armored main-deck in the Valiant, changing again in the Achilles to an armored water-line and battery, and ending with a full water-line and main-deck armor in the Minotaur and Bellerophon—the system adopted by France at the start. During this period Coles’s turret-ship development commenced with two different types of ships—a harbor-defence type, represented by the old line-of-battle ship Royal Sovereign, which was cut down, armored, and provided with revolving turrets mounted on a low flush deck, and the Rolf Krake, Scorpion, and Wyvern, constructed for foreign governments, and intended as low-freeboard sea-going vessels. In France the lifetime of the pure broadside type was about the same as in England. Commencing with the Gloire, a tentative development of iron construction was made in the Couronne, but was not followed up. Remaining satisfied with the Gloire type as it was perfected in the Flandre, the French built up a homogeneous and effective fleet, making but one false step in the development. This was in the attempt to carry height and weight of battery to a maximum by introducing a two-decked frigate. In the Magenta and Solferino the armor of the upper gun-deck was confined to the battery, leaving the ends exposed as in the Warrior, but with far more injurious consequences; for the upper works in these ships being of wood were open to the ravages of fire caused by shell and hot shot, which would have inevitably put these ships _hors de combat_. The turret-ship development was also commenced at this period with the ram Taureau, an amplification of Coles’ Lady Nancy; passing from thence to the Cerbere type, which was closely allied to the American monitors. In the private ship-yards of France, Germany had commenced an independent type with the Prinz Adalbert, a false design which was repeated but once, in the Confederate ram Stonewall. In comparing the developments of France and England, there is one novel feature worthy of remark. France, ignoring iron construction, made no attempt to convert her wooden line-of-battle ships into armored vessels. England, throwing wood construction out entirely as unfit for application, converted a number of her wooden vessels into armored ones. In the United States, attention was turned almost entirely to the development of the monitor type, passing from the single to the double turreted class, and overstepping the limit in the three-turreted converted ship Roanoke. The Confederates having designed an independent armored battery-ship (Merrimac type), the Federals developed it in the New Ironsides, carrying it to the end in the Dunderberg. Spain, Austria, and Italy adopted the French development of the broadside ship, the latter country making a false step in the Affondatore, which belonged to the Rolf Krake type. The northern nations introduced the American development almost unchanged. In 1867 England struck the death-blow to the pure broadside ship by the design of the belt and box ship Enterprise, passing rapidly and in a true line to the Pallas, Penelope, Hercules, Sultan, and ending with the Audacious. During this period the faulty development of Coles’s low-freeboard sea-going turret system culminated in the Captain, with whose loss the inventor perished. His work was not lost, however, for in the Monarch appears the true development of his system. During this period also the English, taking the American monitor type in connection with Coles’s turret, advanced the combination in the Rupert, Cerberus, Glatton, and Fury (Devastation). In France the broadside type was modified by introducing the short main-deck battery, supplemented by the spar-deck barbette turrets in the Belliqueuse, carried forward in the Alma and culminating in the Ocean and Richelieu. In the United States, iron-clad development had entirely ceased. In Germany the König Wilhelm represented the full development of the English Enterprise, and the Friedrich Carl entered her fleet as the model of the second-rate armored cruiser belonging to the Alma type. Russia failed in an attempt to advance the New Ironsides type in the cruising iron-clad Perwenec. Holland, with the Buffel, introduced a new type of high-freeboard monitor, and Turkey appeared developing a fleet of the Hercules type. Since 1871 the English have in their sea-going frigates mainly developed individual ships of different types—the Alexandria, Temeraire, Nelson, and Shannon. Their turreted ships have advanced from the Devastation to the Dreadnought and Inflexible, and with these ships the English have for a time rested. In France development was stopped for a time by the war, but recommenced in 1875, when the Alma type was perfected in the Victorieuse, and the Redoubtable and Duperré commenced a new departure. Their coast-defence vessels were also remodelled, following closely the ideas expressed in the Glatton, improving on her in the Tonnerre type. In Italy independent action appears in the new cruising types Venezia and Palestro, and her architects rightly claim half the honor of the last development of turreted vessels. Whether to Italy or to England belongs exclusively the Duilio and Inflexible type is a question that probably will never be satisfactorily answered. Austria develops independently the Custoza and the Tegetthoff. Russia makes a false development in the Popoffkas, and a true one in the Duke of Edinburgh. Germany carries the Monarch development to its highest point in the Preussen, and the Redoubtable development in the Kaiser. Chili, with the help of England, produces a new and true type in the Almirante Cochrane, and Japan and Portugal each appear with a well-designed reduction of the Redoubtable in the Foo Soo and the Vasco da Gama. In this rush of development of twenty years it is true that all fleets have been immeasurably strengthened, but it has been at a cost far beyond what the result would warrant. It is only within the past five years that the development of iron-clad architecture can be said to have taken any steady course. As yet the full effects of this forced and feverish course can scarcely be realized; but as fleets grow now slowly and steadily, those nations who have waited a little and profited by the true developments of the more hasty ones will be in a far better position to meet the sudden exigencies of war than those who have counted on numbers of vessels and gross tonnage displacement as a true criterion of naval strength. From the number of cautious nations the United States must be excluded, since in this country the blow given to the development of private ship-building by the civil war and to the development of naval architecture by political intrigue and interference has resulted in the nearly complete destruction of the science itself. Nothing is more common amongst naval people than speculations and arguments with regard to the true methods of developing a fleet, and it is generally taken for granted amongst those who give the subject but a superficial study that, since the designs that have been created are almost countless in their variety, and that amongst those nations that have attempted an independent development there is not one that does not count as many failures as successes, the matter of design is one of pure guess-work, not stopping to think that, as a rule, the designers themselves are men of the highest abilities, and that with a ship, as with everything else, there are certain limiting circumstances that the nature of the vessel itself forbids violating. In this respect a comparison of the proportions of the different elements of vessels of varying types affords a useful lesson. RATIOS OF THE PRINCIPAL ELEMENTS OF IRON-CLAD VESSELS TO THEIR DISPLACEMENT. _First-rate, Sea-going, Full-rigged Frigates._ DISPLACEMENT RANGING FROM 10,500 TO 5400 TONS. ====================+=====+======+======+==================+=====+========= |Hull.|Armor.| Hull |Ordnance.|Engines |Coal.| Spars, NAMES. | | | and | | and | | Crew, | | |Armor.| |Boilers.| | and | | | | | | |Supplies. --------------------+-----+------+------+---------+--------+-----+--------- Gloire | .472| .144 | .616 | .066 | .114 | .116| .088 Magenta | .474| .161 | .635 | .073 | .107 | .107| .078 French. Provence | .441| .163 | .604 | .065 | .134 | .107| .090 Marengo | .463| .180 | .643 | .063 | .111 | .078| .085 Richelieu | .476| .195 | .671 | .067 | .095 | .085| .082 Devastation| .389| .294 | .683 | .061 | .118 | .064| .074 --------------------+-----+------+------+---------+--------+-----+--------- Austrian.Kaiser | .481| .147 | .628 | .055 | .113 | .083| .121 Tegetthoff | .342| .289 | .631 | .051 | .145 | .087| .086 --------------------+-----+------+------+---------+--------+-----+--------- German. König | | | | | | | Wilhelm | .401| .216 | .617 | .066 | .121 | .111| .085 --------------------+-----+------+------+---------+--------+-----+--------- Warrior | .518| .149 | .667 | .059 | .101 | .098| .075 Achilles | .504| .183 | .687 | .048 | .107 | .072| .086 Minotaur | .493| .194 | .687 | .047 | .101 | .072| .093 Bellerophon| .483| .171 | .654 | .054 | .118 | .085| .089 English. Sultan | .428| .209 | .637 | .062 | .133 | .080| .088 Hercules | .431| .199 | .630 | .065 | .138 | .090| .077 Audacious | .437| .221 | .658 | .055 | .117 | .085| .085 Alexandra | .405| .246 | .651 | .072 | .141 | .053| .083 Temeraire | .404| .226 | .630 | .058 | .158 | .060| .096 --------------------+-----+------+------+---------+--------+-----+--------- _Second-rate, Sea-going, Full-rigged Frigates._ DISPLACEMENT RANGING BETWEEN 5150 AND 2950 TONS. ===================+=====+======+======+=========+========+=====+========= |Hull.|Armor.| Hull |Ordnance.|Engines |Coal.| Spars, Names. | | | and | | and | | Crew, | | |Armor.| |Boilers.| | and | | | | | | |Supplies. -------------------+-----+------+------+---------+--------+-----+--------- Alma | .519| .234 | .753 | .043 | .107 | .062| .035 French. | | | | | | | Victorieuse| .475| .172 | .647 | .075 | .096 | .068| .114 -------------------+-----+------+------+---------+--------+-----+--------- Pallas | .488| .153 | .641 | .038 | .162 | .074| .085 English. | | | | | | | Shannon | | | .655 | .071 | | | -------------------+-----+------+------+---------+--------+-----+--------- German. Hansa | .416| .194 | .610 | .069 | .157 | .067| .097 -------------------+-----+------+------+---------+--------+-----+--------- Russian. Duke of | | | | | | | Edinburgh| .379| .112 | .491 | .033 | .197 | .215| .064 -------------------+-----+------+------+---------+--------+-----+--------- Chilian. Almirante | | | | | | | Cochrane| | | | .073 | | .073| -------------------+-----+------+------+---------+--------+-----+--------- Austrian. Drache | .526| .133 | .659 | .041 | .086 | .089| .125 -------------------+-----+------+------+---------+--------+-----+--------- _Turreted Sea-going Iron-clads._ DISPLACEMENT RANGING BETWEEN 11,550 AND 8400 TONS. =====================+====+=====+=====+========+=======+====+===== Devastation |.301|.341 |.642 | .054 | .117 |.146| .041 Dreadnought |.342|.301 |.643 | .048 | .131 |.137| .041 Inflexible |.327|.362 |.689 | .070 | .117 |.103| .021 Duilio |.341|.315 |.656 | .053 | .117 |.108| .066 Peter the Great |.366| | | .051 | .145 |.092| Monarch |.433|.217 |.650 | .041 | .133 |.072| .104 ---------------------+----+-----+-----+--------+-------+----+------ _Turreted Coast-defence Iron-clads._ DISPLACEMENT RANGING BETWEEN 5550 AND 2550 TONS. ================+=====+======+======+=========+========+=====+====== Cerberus | .428| .369 | .797 | .059 | .077 | .036| .031 Hotspur | .430| .309 | .739 | .030 | .133 | .069| .029 Glatton | .320| .352 | .672 | .068 | .114 | .112| .034 Cyclops | .411| .331 | .742 | .068 | .076 | .082| .032 Javary | .288| .373 | .661 | .068 | .106 | .051| .114 Popoff | .291| .384 | .675 | .078 | .150 | .047| .050 Onondaga | .624| .117 | .741 | .059 | .102 | .068| .130 Tonnerre | .359| .371 | .730 | .036 | .118 | .052| .064 ----------------+-----+------+------+---------+--------+-----+------ Although these tables are too limited to permit of a just appreciation of the development of iron-clad architecture, much profit may be derived from them. For example: it is known that the French have been slow in adopting iron hulls, and at the first glance many are inclined to sneer at their backwardness, but an inspection of the table will show that their caution was well founded. In weight of hull they never passed 48 per cent, while the English with their iron construction did not reach that point as a _minimum_ until the Hercules was designed. Whilst, however, the French had reached the lowest possible limits with wood (between 44 and 48 per cent), the English by constant improvement steadily reduced the weight of their iron hulls from 52 per cent in the Warrior to 44 in the Audacious. The gradual perfection of steel manufacture coming to their assistance permitted the English by partially introducing it to reduce the weight to 40 per cent. At this point the French take up the iron hull and with the Devastation reach 39 per cent. The Austrians, appreciating the value of the saving in weight of hull, build an all-steel hull in the Tegetthoff, bringing the weight to its present minimum of 34 per cent. Since iron manufacture has never been in so advanced a state in France as in England, it is safe to state that had the Gloire’s hull been of iron, it would have absorbed at least 52 per cent of the displacement, a very serious matter in the first stages of iron-clad building. The wisdom of choosing a wooden hull is then sufficiently shown in this one point of saving 6 per cent in weight, and as the French had commenced with a complete armored side, they could not build in iron until the weight of that system was reduced to that of wood. This necessity was all the more urgent as the percentage of armor increased more rapidly than that of hull diminished. From the Gloire to the Richelieu and from the Warrior to the Hercules the regularity of increase is remarkable, being about the same in both countries, and yet an examination of the weight of hull and armor together shows the French to have the advantage. A strictly true comparison of percentages of armor, however, would necessitate a closer examination of the system of application than is permissible in a general summary. The advantages of a light hull, however, are well shown in the respective percentages of the Devastation and Tegetthoff. The 39 per cent of the Devastation is far beyond the English limit, but it also brings the hull and armor together about the same amount in advance, which is a clear disadvantage to other factors. By saving on the hull, however, the Tegetthoff gets the same high per cent of armor, while weight of hull and armor together are at the very lowest limit. Passing to the second-rates we find the weight of hull averaging higher and that of armor lower, bringing the total weight about the same. The Duke of Edinburgh is of a special type which can hardly be compared with the others. Her hull of 38 per cent is evidently of iron and steel in the best combination, whilst her very low percentage of armor shows at once that it is extremely limited, bringing the total at least 12 per cent below the average, the reason for which is shown at once by referring to weight of engines and coal, which are carried far beyond the average. This vessel is intended to steam 16 knots, with a coal capacity for 6000 miles at 10 knots. Turreted vessels having a low freeboard should naturally have a smaller percentage of weight of hull, which is found in the heavier types to range between 30 and 34 per cent (excluding the Peter the Great, which is of a comparatively early construction). As an offset to this, armor is applied until the difference is made up, bringing the total weight about the same. The Onondaga deserves especial examination, as showing the attention (?) paid by Americans to this point. Her weight of hull is 15 per cent more than that of the heaviest wooden hull amongst the French frigates, and 33 per cent more than that of the Javary, a vessel of an exactly similar type. Her armor, turrets included, is 3 per cent _less_ than that of the Gloire, instead of being, as it should, 15 per cent more, and 25 per cent less than that of the Javary. Hull and armor together are at least 10 per cent above the average. By a bad construction of hull a clear 30 per cent of weight was completely wasted. The very low percentage of ordnance seems no doubt strange to many who talk loosely of heavy guns and projectiles without thinking that this element is one of solid dead weight occupying an immense space. From 5 to 7 per cent includes the entire range, from the vessel sacrificing ordnance to speed to the one with a maximum of ordnance and moderate speed, the Duke of Edinburgh being again an exception. The limits of weights of engines and boilers may be placed at from 11 to 13 per cent, and those of the coal supply from 8 to 11 per cent. Great diversity should be expected in the percentages of ordnance, engines, and coal in the second-rates, depending upon their special objects, yet as is seen there is scarcely 4 per cent difference between the extremes. The remaining percentage should be about the same throughout, with a slight variation for the proportion of sail-power, the total allowance for this latter being from 1 to 3 per cent. By means of these tables the beginner may get an adequate idea of the limiting proportions of the main elements of a vessel. It is seen that the factor absorbing the greatest proportion of the displacement is the one that calls for a reduction, all others requiring extension. Weight of hull is an obstacle. In armor, by an increase of percentage an increase of defensive power is gained; with ordnance, an increase of offensive power; with boilers and engines, an increase of general effectiveness; with coal, an increase in endurance; while the percentage of spars, crew, and stores is a necessary constant. Thus the development of naval construction is seen to be a matter of vital importance. Had the Onondaga been properly constructed there would have been a useful percentage of fully 20 per cent to have been distributed in making her a sea-going vessel. This fact is plainly brought out in the breastwork modifications of the monitor type, in which the breastwork is a clear addition of dead weight on a similarly formed and proportioned body without being of any assistance as additional freeboard. From the results attained in the Tegetthoff the lowest limit of weight of hull attainable with present perfections of steel construction may be placed at 34 per cent for first-rate frigates and about the same for second-rates. For turreted vessels it may fall to 28 or 27 per cent. Although weight of armor is in a manner a direct measure of defensive power, it is an objectionable feature and one whose difficulty of counteraction has been almost insurmountable owing to the excessive cost of steel, whose superiority in the end was extremely doubtful. Within the past few years, however, a happy combination of iron and steel has been made which will go far towards saving percentage in weight, although apparently it will for some time to come make a saving in this direction of only the percentage between iron and steel framing. With iron framing and compound armor the same results of weight of hull and armor together may be attained that now hold with steel framing and iron armor, with the advantages of an increase in defensive power at about the same cost. Wherever it is a question of rearmoring vessels, the compound armor is a great gain to the fighting power of the vessel, although in general the expense of the change is more than the result would warrant. The highest advantages of this armor are reaped by the second-rate cruisers, who retain their speed and coal capacity with an increase of defensive power that brings them within the fighting lines of first-rates. Capacity for fuel is a matter of the greatest importance in time of war. England alone of all the maritime nations can afford to neglect this point. A man-of-war without steaming-power in war-time is helpless, and yet by the precepts of international law she is debarred from getting this material in foreign ports. Russia, having a peculiarly vulnerable home coast, easily closed and hard to reach, has with great wisdom sacrificed all qualities in her fast cruisers to the two of speed and coal capacity. Keeping her sail-power as the constant factor, the two important ratios of ordnance and armor are reduced to the lowest point, their gain being entirely transferred to the coal capacity. In considering the most advantageous method of placing and distributing armor, problems without end arise whose consideration requires the most careful weighing of all the different circumstances of its use, and yet it is in this particular that are generally found the most positive assertions and criticisms from those who have given but little or no attention to the subject. For the protection of the battery and above-water sections of a vessel the extremes of position of armor are the vertical, giving the greatest possible extent of protection, and the horizontal, giving none. Arguments without end are found in favor of this or that type, varying between the two limits. The truth is, however, that there is scarcely any choice between these extremes. Experiment has fully proved that inclining armor at any angle less than 50° is of itself no advantage as regards preventing penetration. Beyond this angle the great increase of weight necessary to make up the vertical space required necessitates a curtailment in extent of armor entirely neutralizing all the benefits of the inclination. There is left then no choice between the vertical complete protection and the horizontal or armored-deck system giving none whatever. In the vertical protection the question of distribution presents itself anew, varying between the long rectangle and the circular turret. The minimum turret diameter may be safely taken at 20 feet inside. Here the greatest economy of room is attained, but this economy involves a reduction in the number of guns, a limitation in the position, and, unless the French barbette turret be used, the possibility of disabling at one blow the greater part of the offensive power of the ship by jamming the turret. With the same amount of armor that is used in a turret of 20 feet, the broadside may be well covered for a length of from 15 to 18 feet, giving protection to double the number of guns. This advantage, however, is purchased at the expense of a more unfavorable disposition of weight and a complication of upper-work framing. These points bear directly upon the service for which the vessel is intended, and are so intimately connected with the whole general type of the vessel that it becomes the most complete absurdity to assert that turrets alone or armored broadsides alone shall be used. As weight of armor increases, the extent of its protection becomes one of the most serious of questions. In ten years from the date of its introduction it became impossible to completely protect the hull of the frigate, and in fifteen years we find it necessary to commence to strip the turreted vessel with her minimum of freeboard. If the greatest architects of the world find themselves almost at a loss to retain the effectiveness of the armor carried whilst keeping within proper bounds in weight, it is certainly idle for those who barely appreciate the necessity for covering battery and steering-gear to assert that armor should be carried thus and so. The application of horizontal armor presents problems equally abstruse; more so in fact to the designer who does not fully appreciate all the obstacles to be surmounted and the real advantages which are to be obtained. A vessel having a heavy steel deck that shall fully protect her under-water sections and yet permit of such a division of above-water spaces as to permit her to be pierced with impunity whilst that space is left available for the many necessities of circulation and storage, is a consummation of architectural skill the most difficult of attainment. The matter of properly proportioning the vital factors of a man-of-war, be she iron-clad or unarmored, is one of the highest consideration. To speak of designing ships to carry 40-ton guns and have a speed of 16 knots, and at the same time not to consider what are the absolute limitations in their construction, is as senseless as to attempt to rebuild a monitor without first finding out whether she will float or not after she is built. The Onondaga is an example of the first method of construction, the Puritan of the second. These two vessels represent the condition of naval architecture and construction in the United States for a period of ten years during which the naval architects of all the rest of the world have been advancing at giant strides. Whilst then we may leave out of consideration those types of vessels which have clearly proved failures, there is not a single one that has been in any way successful that is not deserving of the closest attention and study. Whilst amongst English types we find the greatest diversity of application combined with the very highest architectural skill and development, it must not be forgotten that France, Italy, and Austria have architects second to none in the world, men whose national jealousies and ambitions lead them to totally independent lines of thought and action and whose works are worthy of the highest praise. PART V. PERSONNEL. ORGANIZATION—FLEET DIVISION—BUDGETS. ARGENTINE REPUBLIC. The navy of this country is as yet not fully or independently developed, its administration and budget being incorporated with that of the army. All vessels of a larger size than gun-boats have been purchased from foreign governments, and until lately there have been no facilities for the repair of ships; at present, however, a dock-yard is in course of construction at Zarate, which when completed will furnish docking and repairing facilities for first-rate vessels. This yard is, however, hardly to be considered a building yard. Engines, boilers, and ordnance will be purchased from foreign markets for some time to come, as the mechanical industries are not yet sufficiently developed to permit the establishment in the country of the necessary machine-shops. A naval school has been established and measures have been taken to introduce apprentice instruction. The personnel of the Argentine fleet is divided into three corps or divisions: NAVAL DIVISION. 2 Fleet Commandants. 5 Colonels. 8 Lieutenant-Colonels. 6 Majors. 7 Captains. 26 Lieutenants. 22 Cadets. 43 Midshipmen. 7 Paymasters. 26 Machinists. 748 Men. —— Apprentices. —— Total 900 MARINE INFANTRY AND ARTILLERY DIVISION. 2000 Men (National Guard). TORPEDO DIVISION. 3 Chiefs. 8 Officers. 80 Men. The yearly budget of the navy is about $700,000, or a little less than one twenty-fourth of the entire national expense. There are no cruising squadrons as yet, although more than half of the fleet is kept constantly in commission, policing the coast of Patagonia and the home coast. AUSTRIA. The Imperial Council being composed of three Ministers only, holding respectively the portfolios of foreign affairs, war, and finance, the navy although a branch of imperial control (as distinguished from the separate cabinets of Austria and of Hungary) is not distinctively recognized in the Council. The head of the Marine Section of the Ministry of War is a Vice-Admiral, who is Commander-in-Chief of the fleet and under whose direct control is placed the superintendence of all the departments of the navy, the Admiralty of the war station of Pola, and the command of the maritime district of Trieste. The personnel of the navy has a double “cadre,” one for war and another, somewhat reduced, for peace, there being during time of peace a reserve division of officers composed of those whose services can best be spared. The corps and grade divisions of the personnel correspond with those of other navies, the names and cadres being as follows: SEA OFFICERS. WAR. PEACE. 1 1 Admiral (Complimentary Grade.) 3 2 Vice-Admiral. 7 6 Contre-Admiral. 22 16 Linienschiffs Capitän. 21 19 Fregatten Capitän. 25 22 Corvetten Capitän. 146 100 Linienschiffs Lieutenant, 1 Klasse. 73 50 Linienschiffs Lieutenant, 2 Klasse. 216 155 Linienschiffs Fähnrich. 244 163 See Cadet and Aspirant. MARINE INFANTRY. 1 1 Contre-Admiral. 1 1 Linienschiffs Capitän. 4 4 Fregaten Capitän. 3 3 Corvetten Capitän. 19 19 Linienschiffs Lieutenant, 1 Klasse. 9 9 Linienschiffs Lieutenant, 2 Klasse. 10 10 Linienschiffs Fähnrich. MARINE PRIESTHOOD. 1 Marine Pfarrer. 2 Marine Curat. 6 Marine Kaplan. (The Pastor and the Curates have permanent duty on shore.) MEDICAL CORPS. 1 1 Oberster Marine-Arzt. 2 2 Marine-Ober-Stabsarzt. 4 4 Marine-Stabsarzt. 23 18 Linienschiffs-Arzt. 25 18 Fregatten-Arzt. 29 19 Corvetten-Arzt. TECHNICAL DEPARTMENT. _Ship Building._ 1 Oberster Ingenieur. 1 Oberingenieur, 1 Klasse. 2 Oberingenieur, 2 Klasse. 2 Oberingenieur, 3 Klasse. 8 Ingenieur, 1 Klasse. 8 Ingenieur, 2 Klasse. 8 Ingenieur, 3 Klasse. 4 Élève. _Engine Building._ 1 Oberster Ingenieur. 1 Oberingenieur, 1 Klasse. 1 Oberingenieur, 2 Klasse. 2 Oberingenieur, 3 Klasse. 3 Ingenieur, 1 Klasse. 3 Ingenieur, 2 Klasse. 4 Ingenieur, 3 Klasse. _Marine Artillery._ 1 Oberster Ingenieur. 1 Oberingenieur, 1 Klasse. 2 Oberingenieur, 2 Klasse. 2 Oberingenieur, 3 Klasse. 3 Ingenieur, 1 Klasse. 6 Ingenieur, 2 Klasse. 6 Ingenieur, 3 Klasse. 6 Élève. _Building and Dock Construction._ 1 Oberster Ingenieur. 1 Oberingenieur, 1 Klasse. 1 Oberingenieur, 2 Klasse. 1 Oberingenieur, 3 Klasse. 1 Ingenieur, 1 Klasse. 1 Ingenieur, 2 Klasse. 2 Ingenieur, 3 Klasse. _Machinists._ 2 Ober Maschinist. 20 Maschinist, 1 Klasse. 35 Maschinist, 2 Klasse. 55 Maschinist, 3 Klasse. COMMISSARIAT DEPARTMENT. 1 Marine-Generalcommissär. 4 Marine-Obercommissär, 1 Klasse. 4 Marine-Obercommissär, 2 Klasse. 12 Marinecommissär. 14 Marinecommissär-Adjunct, 1 Kl. 41 Marinecommissär-Adjunct, 2 Kl. 41 Marinecommissär-Adjunct, 3 Kl. 14 Marinecommissär-Élève. The number of enlisted men in time of peace is 5836, increased for a war footing to 11,532. These men are all drawn for service from the coast provinces, their length of service being three years in the fleet and seven in the reserve. From the time that men are drafted into the service until they pass into the reserve a thorough system of education is followed out. The depot for their reception is at Pola, where the recruits (received first in shore barracks) are divided into twelve companies, the arrangement being as nearly as possible in conformity with the intelligence of the individual. Company No. 6 is made up entirely of firemen and coal-heavers; Company No. 12, workmen employed in the gun-foundries and dock-yards. The remaining ten companies are the sailors of the fleet. Whilst in the company, the recruit is taught the elements of the drills and discipline, and a certain time is devoted each day to teaching reading, writing, and more especially the German language, as a great number of the recruits are totally ignorant of any tongue except that of their native province. RELATIVE RANK. =====================+===========================+================== Rear-Admiral |Commissary-General | Line-Ship Captain |Chief Commissary, 1st class|Medical Commandant Frigate Captain | ” ” 2d ” |Medical Chief of | | Staff Corvette Captain |Commissary |Staff Surgeon Lieutenant, 1st class|Asst. Commissary, 1st class|Line-Ship Surgeon ” 2d ” | ” ” 2d ” |Frigate Surgeon Ensign | ” ” 3d ” |Corvette Surgeon Midshipman | | Cadet |Commissary Cadet | =====================+===+=======================+================== | | Engineer Commandant | | Chief-Engineer, 1st class| | ” ” 2d ” | | ” ” 3d ” |Chief Machinist |Naval Pastor Engineer, 1st class |Machinist, 1st class | ” Curate ” 2d ” | 2d ” | ” Chaplain ” 3d ” | 3d ” | | | Engineer Cadet | | -------------------------+-----------------------+------------------ As the recruits advance in instruction, they are picked out for the formation of classes for instruction aboard ship, and at certain intervals a class is transferred to the guard-ship Bellona, where their instruction is extended somewhat, and during the course on this ship selections are made of those who are best qualified to become helmsmen and gunners. The course of instruction on this ship lasts for from six weeks to two months. From the Bellona the classes are transferred to the different school-ships in accordance with the especial line of instruction that is to be followed. The seamen go to the corvette Minerva, to which vessel also recruits who are already sailors are sent direct from the depot without passing through the Bellona, and men who have passed either the helmsman’s or gunner’s course come here for their final course of seamanship. The Minerva is kept cruising almost constantly for exercise in seamen’s duties, and the course of a class is about six months. At the end of this course those who show sufficient aptitude are transferred to the other ships for the complete course; the remainder, as well as all men who have passed the entire course, return to the depot, forming one or more of the twelve companies in readiness for transfer to any ship going into commission. Those who are found too stupid or vicious to learn within a reasonable time are transferred from the ships to the depot, where they do the police work and are drafted as landsmen into cruising ships. The sloop Saida is the instruction vessel for helmsmen and quartermasters, the course being about three months. Men passing from the Bellona to the Saida are transferred to the Minerva for the final seamanship course, whilst the best of those from the Minerva pass to the Saida and thence to the gunnery-ship for complete instruction. The Adria is the gunnery-ship, the term of service being of the same length as that of the Saida. On board of this ship there is the ordinary gunner’s course, a superior course for those seamen who are selected for non-commissioned officers of marine infantry, and an officer’s course, the higher petty officers who are intended for instructors aboard ship being admitted to the latter. There is attached to the depot a school for machinist petty officers, having for its object the perfection of the theoretical and practical knowledge of the workmen chosen from amongst the most capable of the 12th company. The length of the course is fixed at one year, at the end of which time an examination is held, and those who pass successfully are appointed machinists and embarked in cruisers at once; the remainder are returned to the depot for subordinate duties. For certain of those who in depot give promise of final success without having the knowledge requisite for an immediate entry into the machinist school, a preliminary six months’ course is provided. This system is a temporary one to furnish machinists until the thorough establishment of a new machinists’ apprentice school, the duration of instruction in the latter being three years. This school is intended exclusively for the children of persons who have served in the navy. The entrance age is between fourteen and seventeen, and the children must already have served a partial apprenticeship in a machine-shop. They are obliged to serve for ten years in the navy after completing the course, and in case of failure for any cause except incapacity they are obliged to render one year of general service for each year or part of year passed at the school. The number of apprentices is limited to 50, and whilst at the school they receive in addition to their clothing and sustenance eight cents a day. There are in general about 2000 men in depot. The Bellona’s complement is 300, the Minerva’s 100, the Saida’s 50, and the Adria’s 500. The remainder of the cadre are embarked or on duty at the dock-yards. In addition to these and not counted in the general draft are the seaman apprentices, quartered on board the Schwartzenberg and numbering about 300. This school is open to all boys between the ages of fifteen and seventeen. The course is three years, with obligation to serve ten more after finally passing. On leaving the apprenticeship at the end of the three years, the boys pass to the Minerva, Saida, and Adria, receiving certificates and advancement in grade in proportion to their aptitude. In case of failure to pass through the apprentice course they are transferred to depot to go through the recruit’s course and serve out their time. The Naval Academy is established at Fiume. The curriculum of the school is of the same grade as that of the municipal superior schools. Candidates are appointed by competitive examination, and must be between the ages of 13 and 15. The course is four years, at the expiration of which the student passes into service with the grade of cadet. Aspirants are students passing into the service without having gone through the academy course. They must be between the ages of 15 and 17 and have successfully passed through the course of one of the municipal superior schools. Upon entering they take the regular course on board the school-ships, taking the grade of cadet at the final successful examination. _One-Year Volunteers._ This institution is a favor accorded to young men who, having prepared themselves by a course of study for a certain profession, do not wish to serve full time under their draft. During one year they receive naval instruction sufficient to fit them as sailors or petty officers in time of war. Particular attention is paid to as far as possible follow a course in consonance with their previous studies. At the end of the course they pass into the reserve. Professional mariners may enjoy this privilege upon presenting certificates stating that they have successfully passed examinations before any native or foreign marine school. They must in addition thoroughly understand German and one other of the languages spoken generally throughout the empire. During their year of service they receive the pay of third-class seamen and their clothing. After passing the different school-ships they enter the reserve as officers if there are vacancies, otherwise as cadets. Students who are preparing themselves for engineers follow the courses of machinists or constructors in the same way. Students whose professions are in no way in accordance with that of the naval officer are sent to the Adria for a thorough course of gunnery. They enter the reserve at the end of a year as petty officers or seaman gunners, according to the rate of their examinations. Medical students have their year of service confined strictly to hospital duty, passing into the reserve as medical cadets, to serve as such in hospitals only, during war-time. Doctors having diplomas practise for a year in the hospitals and pass to the reserve with the grade of lieutenant. They are liable for sea service in time of war. The depot, school-ships, machinists’ school and apprentice school are all at Pola, and at the same place there is a school for the children of both sexes of people in the naval service in indigent circumstances. In addition to these departments of the navy, there is a Hydrographic Department, charged with the care of the Observatory, correction of charts, and preparation of almanacs; the Permanent Artillery Commission, charged with all ordnance experiments; the Permanent Commission of Naval Constructions, charged with the examination of all modifications and improvements in the construction and outfit of war-vessels; the dock-yard at Trieste; and the arsenal at Pola. The iron-clads and large wooden vessels of the Austrian Navy are built in the private ship-yards of San Marco and San Rocco at Trieste, under the superintendence of constructing engineers. These yards are fully equal to building iron-clads of the largest type. Austria has no foreign squadrons in time of peace. Her foreign cruisers are wooden corvettes which make cruises of from one to two years’ duration. Her iron-clads are commissioned singly to cruise for short periods in the Adriatic. In time of war her whole iron-clad fleet is put in commission, the fleet being divided into squadrons of nine vessels each. BRAZIL. ==============================+============================= Almirante | Vice-Almirante | Chefe de Esquadra | Chefe de Divisão | Capitão de mar é guerra| Cirurgião-mór Capitão de fragata | Cirurgião de esquadran Capitão tenente | Cirurgião de divisão Primeiro tenente | Primeiro cirurgião Segundo tenente | Segundo cirurgião Guarda marinha | Pharmaceutico Aspirante | ==============================+============================= | | | | Commissario de numero de não | | Commissario de primeira classe| | Commissario de segunda classe | Machinista de primeira classe Commissario de terceira classe| Machinista de segunda classe | Machinista de terceira classe ------------------------------+----------------------------- The Emperor of Brazil is Commander-in-Chief of the land and naval forces of the empire and President of the Supreme Council of War. The navy has a separate representative in the Cabinet, the Minister of Marine being always a civilian. In the Supreme Council of War the navy is represented by four members, naval officers of the highest grades. The organization of the naval ministry consists of a civil and a naval department. The head of both departments is the Minister, assisted in the civil one by a Director-General, four Directors of sections and the under-officers of the sections. The naval department consists of a Naval Council having a vice-president, members, and a secretary. In addition to the Naval Council there is an Adjutant-General’s Bureau with a vice-Admiral at the head who is the immediate executive, a Controller’s Bureau and a Finance Bureau, all within the limits of the Navy Department proper. There are five naval arsenals, situated at Rio Janeiro, Bahia, Pernambuco, Pará, and Matto Grosso. At the ports of Rio Janeiro, Espiritu Santo, Bahia, Sergipe, Alagoas, Pernambuco, Parahyba, Ceara, Rio Grande do Norte, Pianhy, Maranhão, Pará, Matto Grosso, Rio Grande do Sul, Porto Alegre, Santa Catarina, Parana, and San Paulo are established offices of naval control under the superintendence of a Captain of the Port, these places being recruiting depots. In addition to these departments there is a Naval School, Observatory, and Library at Rio Janeiro. The naval personnel is divided into two main classes, the active and the reserve, the latter forming a very small minority. The grade divisions of rank are as follows: There is a corps of pilots having no relative rank, and chaplains are assigned from the different sees without rank. Warrant officers have the grade of second lieutenant. Machinists are graded into first, second, and third class, the first class having the grade of second lieutenant and the others no official grade. Candidates for entrance into the Naval Academy are required to be between the ages of 14 and 17. The duration of the course is three years, during which time the exercises are pursued almost exclusively on shore. At the date of graduation the cadet takes rank at once as midshipman. The average complement at the Academy is 100. The cadre of the personnel of the navy is 821 officers, 100 cadets, 2993 men, 842 men of the marine battalion, and 1528 apprentices; total, 6184. The Brazilians have no foreign squadrons, their practice being to send occasional cruisers to different parts of the world. Their own waters are, however, divided into squadron cruising grounds as follows: Sea coast, three districts, each employing a squadron of from three to seven vessels; river stations, five, as follows: Rio Grande do Sul, Uruguay, Amazon, Paraguay, Rio Plata, each one having a flotilla of from six to twelve gun-boats and iron-clads. CHILI. There is no distinct Navy Department in Chili, that administration forming one of the sections of the War Department, having one of the senior naval officers at its head. The central administration is at Valparaiso, and is in reality controlled by the civil governor of that district, who has on his staff a naval officer with the title of Major-General, for the superintendence of maritime affairs. Attached to the naval section are a Hydrographic Office, Observatory, and Naval School, and an Apprentice School. The navy is manned in time of peace entirely from voluntary enlistment. The war cadre is not known. That for peace is 148 officers and 5400 men, in addition to which there is a battalion of marine infantry and a battalion of marine artillery of the Civil Guard, amounting in all to 1200 men, making a grand total of 6800. The grades of Chilian naval officers correspond to those of other services, except that there is no grade of Admiral. The Chilians have neither foreign cruising squadrons nor single cruisers, except an occasional single ship visiting the northern Pacific ports and the Brazil coast. There is but one dock-yard for general repairs at Valparaiso. The vessels composing the fleet with the exception of small gun-boats are purchased in foreign markets. The navy, although small, is in excellent discipline, and is rapidly developing in strength and general efficiency. CHINA. The control of naval affairs forms one of the sections of the Ministry of War, the central administration being at Pekin, whilst the general administration is divided amongst three coast districts, at each of which is a dock-yard for construction and repair. To these districts correspond three distinct fleet divisions; 1st, Canton squadron; 2d, Foo Chow squadron; 3d, Shanghai squadron. At Foo Chow are the principal machine-shops and building-yard; at Shanghai the powder factory and arsenal; at Canton the naval school-ships. The fleet is manned by a coast conscription, the length of service being indefinite; cadre unknown. ENGLAND. The government of the navy is vested in a board known as the Board of Admiralty. This board consists of five members, namely: the First Lord, who is always chosen from civil life and is a member of the Cabinet; the Senior Naval Lord (naval officer); the Third Lord (naval officer); the Junior Naval Lord (naval officer), and the Civil Lord (civilian). Under the board is a Parliamentary Secretary, changing, like the five lords, with the government in power. The fixed administration, independent of political parties, consists of one permanent Secretary (naval), a Controller of the Navy (Vice-Admiral), Accountant General (naval), Director-General of the Medical Department (naval), Director of Engineering and Architectural Works (army), Director of Transports (naval), Director of Contracts (naval), Director of Naval Construction (naval), Director of Naval Ordnance (naval), and a Superintendent of Victualling and Stores. The First Lord has supreme authority and all questions are settled by his decision. The Senior Naval Lord directs the movements of the fleet and is responsible for its discipline. The Third Lord has the management of the dock-yards and superintendence of ship-building. The Junior Naval Lord deals with the victualling of the fleet and with the transport department. The Civil Lord has control of the accounts, and the Financial Secretary has charge of the purchase of all stores. The immediate chiefs under the board are the heads of bureaus or departments. In addition to those above named there are others not directly connected with the Admiralty Administration: the Chief of the Hydrographic Bureau, the Adjutant-General of Marines, the Astronomer Royal, and the President of the Naval College. In the central administration the financial secretary assisted by the Civil Lord exercises a rigorous control over all the expenses, guarding against extravagance by means of a system of inspection. For this duty there are two bureaus, the agents of which carry on a rigorous and personal inspection of all coming within their provinces in the different dock-yards. The inspectors of the first bureau are: 1 inspector of machinery, 1 inspector of works in progress, 1 inspector of timber, 2 examiners of completed works, 2 examiners of store accounts. In the second bureau are: 1 inspector of coal, 3 inspectors of dock-yard accounts, 1 examiner of shop accounts, and 1 inspector of buildings and coast-guard posts. For the general administration there are four naval establishments of the first class, Portsmouth, Devonport, Chatham, and Sheerness, and four of the second class, Deptford, Woolwich, Pembroke, and Haulbowline. In addition to these there are 15 colonial depots: Gibraltar, Malta, Halifax, Bermuda, Antigua, Jamaica, Ascension, Sierra Leone, Cape of Good Hope, Trincomalee, Singapore, Hong Kong, Esquimalt, Sydney, and Queenstown. The four first-class home stations are each under the immediate command of a commander-in-chief of the station. The Admiral exercises a military command over all the personnel of the reserve, the depots, school-ships, and vessels in commission. The discipline, instruction, and inspection are under his immediate direction. He has charge also of the police of the coasts and harbors of his district in time of peace and their defence and protection in time of war. With regard to the administration of the dock-yard he is only charged with a general surveillance, and under ordinary circumstances he never interferes with its affairs. He has the power to interfere in cases of necessity, but is obliged under such circumstances to render an immediate account of his actions to the Admiralty. The immediate command of the dock-yard is entrusted to a Rear Admiral superintendent, whose assistants are the heads of the different departments of works. The navy is manned entirely by voluntary enlistment. There are two main cadres of personnel, the active force and the reserve. The latter force is kept up by voluntary enlistment for periods of five years, with obligation to serve twenty-eight days in each year. This service carries with it certain marine privileges, pay, and after twenty years of service a life pension. Its advantages correspond quite closely to those of a life insurance. The apprentice system is also a permanent source of supply to the active personnel. The period of enlistment in the active service is for five years, with increase of pay and allowances for continuous service. GRADES AND RELATIVE RANK IN THE BRITISH NAVY. ====================+======================+====================== EXECUTIVE CORPS | MEDICAL CORPS | SECRETARY’S CORPS --------------------+----------------------+---------------------- Admiral of| Honorary| | the Fleet| | | | | Admiral | | | | Vice-Admiral | | | | Rear-Admiral |Inspector-Gen’l of | | Hospitals | +----------------------+---------------------- Captain of| | | the Fleet | Brevet |Inspector-Gen’l | Commodore | | under 3 yrs | +----------------------+---------------------- Captain | |Secretary to Admiral | | of the Fleet +----------------------+---------------------- |Deputy Inspector-Gen’l| | of Hospitals | +----------------------+---------------------- Captain under |Deputy Inspector-Gen’l|Secretary to 3 years | under 3 years | Commander-in-Chief +----------------------+---------------------- Commander |Fleet Surgeon |Sec’y to Com.-in-Chief | | under 5 years +----------------------+---------------------- Lieutenant after |Staff ” |Secretary to Flag 8 years | | Officer Lieutenant |Surgeon |Secretary to Commodore | | Sub-Lieutenant | | | | Chief Gunner | | | | Chief Boatswain | | | | Chief Carpenter | | | | Midshipman | | ====================+============================== PAY CORPS | ENGINEER’S CORPS --------------------+------------------------------ | | | | | | | | | --------------------+------------------------------ | | | --------------------+------------------------------ Paymaster-in-Chief | Chief Inspector of Machinery | --------------------+------------------------------ | Inspector of Machinery afloat | after 3 years --------------------+------------------------------ | Inspector of Machinery under | 3 years --------------------+------------------------------ Paymaster at 15 | Chief-Engineer at 15 years’ years’ seniority | seniority --------------------+------------------------------ Paymaster of 8 years| Chief-Engineer of 8 years | Paymaster under 8 | Chief-Engineer under 8 years years | Assistant Paymaster | Engineer | | | | | | | Clerk | Assistant Engineer --------------------+------------------------------ The coast-guard service, although not strictly naval, forms an auxiliary naval force, and is drawn entirely from the personnel of the navy. No person is eligible for the coast-guard who has not served eight years in the Navy and who has not qualified as a trained man or a seaman gunner. The effective cadre of the British Navy is as follows: OFFICERS. Executive Corps 2,252 Engineer Corps 870 Pay Corps 526 Chaplains 164 Medical Corps 415 Coast Guard 346 Naval Reserve 405 ----- 4,978 MEN. Petty Officers 16,500 Blue Jackets, Firemen, etc. 18,600 Boys 6,300 Coast Guard 3,954 Naval Reserve 18,000 ------ Total 63,354 Officers 4,978 ------ Grand total 68,332 In addition to this cadre there are two corps of marine troops. The marine infantry, intended exclusively for service aboard ship, consists of three divisions of sixteen companies each, comprising in all 300 officers and 11,092 non-commissioned officers and privates; the marine artillery, intended for garrison duty and to a limited extent as gunnery servants on board ship (in the proportion of 32 to a first-rate), 16 companies, comprising a cadre of 100 officers and 2800 non-commissioned officers and privates. The number of civil employés in the dock-yards amounts to about 20,600. Officers of the executive corps are drawn exclusively from the naval school established on board the school-ship Britannia. Those of the engineer corps are drawn from the engineer school-ship Marlborough. The other corps are drawn from civil life. The Royal Naval College at Greenwich is an institute at which officers of the executive, construction, and engineer corps take an advanced course of instruction, for the purpose of raising the standard of naval education and efficiency. All officers between the grades of captain and sub-lieutenant are eligible after passing a preliminary examination. This institution, organized first in Great Britain, is rapidly being developed in all the other European navies. At the Portsmouth dock-yard there is a special gunnery and torpedo school for the purpose of advanced instruction. The highest grade of officers in the naval reserve is that of lieutenant. This grade is opened to masters of the merchant service under 45 years of age. The grade of sub-lieutenant is open to the chief mates of the merchant service. The grade of midshipman is open to young gentlemen who have served not less than two years in one of the mercantile training-ships, and who are not over 18 years of age. There is an honorary reserve corps in which the grade of commander is reached, officers of this corps having served in the active reserve. The course of instruction at the naval school-ship (Britannia) is two years, and the required entering age is between 12 and 13½. All cadets, midshipmen, and acting sub-lieutenants in active service are required to pass a written examination every year on board the ship where they may be serving. The results of these examinations are forwarded to the Admiralty, and it is by means of them that these officers take their rank in the grade of sub-lieutenant. Those officers who make a specialty of gunnery or navigation and pilotage receive extra pay while doing duties in these specialties. A premium of extra pay is also offered to those officers who acquire fluency in some one of the generally used modern foreign languages. The squadron divisions for foreign service exclusive of colonial-port stations are: Channel Squadron. Mediterranean Squadron. North American Squadron. Pacific Squadron. China Squadron. East India Squadron. Australian Squadron. Cape of Good Hope Squadron. East Coast of Africa Squadron. South American Squadron (Brazil). The average strength of a squadron during time of peace is eight vessels, the great majority being light corvettes and gun-boats. An independent naval establishment has been organized for the protection of the interests of the Indian Empire, called the Indian Navy. There are also independent Australian and Canadian services at the support of the colonies, and regarded as auxiliary forces for colonial coast-defence. FRANCE. The French Navy is represented in the Cabinet by a Minister of Marine, who is invariably chosen from the active list of Admirals. The Minister has as his immediate assistant and Chief of Staff a Vice or Rear Admiral. The central administration of naval affairs is the Naval Ministry at Paris, composed of a Ministers’ Cabinet and five Sections or Directions, which are subdivided into Bureaus. FIRST DIRECTION. _Personnel._—First Bureau: The Staff of the Fleet, controlling all affairs of the Admiralty Council, prefectures, officers, naval schools. Second Bureau: Technical Corps and General Agents, having charge of construction and engine corps, hydrographic office, commissariat clerks, chaplains, hydraulic engineers, watchmen, etc. Third Bureau: Sailors of the Fleet and Maritime Justice. Fourth Bureau: Marine Infantry and Artillery. SECOND DIRECTION. _Matériel._—First Bureau: Naval construction and hydraulic works. Second Bureau: Ordnance. Third Bureau: Equipment. THIRD DIRECTION. _Administrative Service._—First Bureau: Naval inscription and navigational police (control of merchant service). Second Bureau: Fisheries and maritime control. Third Bureau: Pay and clothing. Fourth Bureau: Subsistence and hospitals. FOURTH DIRECTION. _Colonies._—The administration of colonial affairs is entirely under the direction of the Minister of Marine. FIFTH DIRECTION. _General Accounts._—First Bureau: Funds and regulations for their expenditure. Second Bureau: Expenses abroad. Third Bureau: Examination of accounts. Fourth Bureau: Examination of receipts and expenditures. Fifth Bureau: Interior service, archives, and libraries. These being the main divisions of control, there are certain commissions intimately connected with the regulation of affairs, most of the committees being permanent in character. The Council of Naval Works examines the technical points connected with the introduction or manufacture of naval material. The Superior Council of Health superintends sanitary matters. The Council of Captures and Losses regulates prizes and reimbursements. The Lighthouse Committee controls all lighthouse affairs. The Forestry Committee has charge of all standing timber and timber lands. The Committee of Inspection of Fuel has charge of the purchase, storage, and issue of fuel. The Permanent Commission of Control and Revision of the Regulations, Armament, and Clothing attends to all matters of change of regulation. The Consulting Commission for the Arrangement of Disputes has general consultation superintendence. The Superior Commission of Submarine Defences has control of torpedoes. The Central Commission for the Examination of Works of Officers is a committee through whose hands pass all the naval reports made by officers for the benefit of the service. The Permanent Commission of Libraries has charge of libraries for naval stations, ships, and prisons. The Direction for the Regulation of the Affairs of Pensioners and retired people of the service forms a separate department of the Ministry. The Hydrographic Office, Bureau of Longitudes, Museum, Naval and Apprentice Schools and the Artillery experimental firing-ground of Gavre form separate departments. The general administration of affairs is carried on at the naval ports. The maritime territory of France is divided into five grand districts, each under the control of a Préfet Maritime, who is a Vice-Admiral, Commander-in-Chief of the station; the districts are subdivided, each subdivision being under the control of a Chief and a Captain of the Port. The First District extends from the Belgian frontier to Cherbourg; headquarters, Cherbourg; sub-districts, Dunquerque, Havre, and Cherbourg. The Second District extends from Cherbourg to Quimper, including adjacent islands; headquarters, Brest; sub-districts, Saint Servan and Brest. The Third District extends from Quimper to the Loire, including adjacent islands; headquarters, L’Orient; sub-districts, Nantes and L’Orient. The Fourth District extends from the Loire to the Spanish frontier; headquarters, Rochefort; sub-districts, Bordeaux, Rochefort, and Bayonne. The Fifth District comprises the whole Mediterranean coast and Corsica; headquarters, Toulon; sub-districts, Marseilles, Bastia, and Toulon. The Préfet Maritime, being at the head of maritime affairs in his district, is assisted by—1st. Major-General of Marine, who has immediate command of all the personnel in the district, the instruction of officers and men, details for dock-yard duty, library, observatory, hydrographic establishment, inspection of vessels fitting out, and the receipt and transmission of reports. This office is as a rule filled by a Rear-Admiral. 2d. A Commissary-General, who has control of the receipt and distribution of funds, enlistment of civil employés, the direction of the marine inscription, administration of police, detail of officers of the commissary department, and general charge of all accounts kept in the district, receiving, arranging, and forwarding them. 3d. A Director of Port Movements (Captain of the Port), who has charge of all vessels either in or out of commission, superintending their movement, anchorages, ballasting, careening, entrance into basins, etc., charge of fire apparatus, clearing of channels, placing of buoys, lights, and signals. 4th. A Director of Naval Constructions. 5th. A Director of Artillery. 6th. A Director of Hydraulic Works and Buildings. 7th. A Council of Health, composed of the surgeons stationed in the district. All of these officers are found at the headquarters port; at the ports of the sub-districts there are always two naval representatives: 1st. The “Chef de Service,” who is a Commissary-General and whose principal charge is in relation to the inscription. 2d. The Captain of the Port, who in general is a Lieutenant. The French Navy is manned by voluntary enlistment and by inscription. Every seafaring person is placed upon the inscription list upon reaching the age of eighteen, and between that and twenty he is bound to present himself at the headquarters of the district within which he lives. Here he passes through a preliminary course of instruction on board the school-ships lasting for a few months, at the expiration of which time if his services are not required in the fleet he is granted a leave of absence, without pay, which may be extended from time to time. During this period he may make foreign voyages, the only restriction being that he shall not change his calling. At the end of five years he passes into the first reserve, where for a period of two years he cannot leave the country. At the end of this time he passes into the second reserve and is practically free, being only liable to service under especial circumstances. Special inducements are held out for seafaring people. None but those who are or have been inscribed are allowed to fish in French waters or to be employed on French coasting vessels. While they are serving their time, troops cannot be billeted on them; they travel at military rates, and have the benefits of naval hospitals and naval insurance. In drafting for active service great care is taken to only draft those who can be best spared from their homes, leaving the others at almost entire freedom. NAMES AND ASSIMILATED GRADES OF THE DIFFERENT NAVAL CORPS. ----------------------+-------------------+----------------------- CORPS DE LA MARINE | ART. ET INF. | CORPS DU GÉNIE | DE MARINE | ----------------------+-------------------+----------------------- Amiral | | ----------------------+-------------------+----------------------- Vice-Amiral |Général de Division| ----------------------+-------------------+----------------------- Contre-Amiral |Général de Brigade | Inspecteur Général ----------------------+-------------------+----------------------- | | Directeur ----------------------+-------------------+----------------------- Capitaine de Vaisseau |Colonel | Ingenieur de 1ʳᵉ clss. ----------------------+-------------------+----------------------- Capitaine de Frégate |Lieuten’t-Colonel | Ingenieur de 2ⁿᵈᵉ clss. |Chef de Bataillon | ----------------------+-------------------+----------------------- Lieutenant de Vaisseau|Capitaine 1ʳᵉ cl. | Sous-Ingé’r 1ʳᵉ cl. | 2ⁿᵈᵉ ” | 2ⁿᵈᵉ ” ----------------------+-------------------+----------------------- Enseigne de Vaisseau |Lieutenant 1ʳᵉ cl.| Sous-Ingénieur de | 2ⁿᵈᵉ ” | 3ᵐᵉ classe ----------------------+-------------------+----------------------- Aspirant 1ʳᵉ classe |Sous-Lieutenant | Élève 2ⁿᵈᵉ ” | | ----------------------+-------------------+----------------------- ----------------------+----------------------+--------------------- CORPS DU COMMISSARIAT | CORPS DE SANTÉ | MÉCANICIENS | | ----------------------+----------------------+--------------------- | | ----------------------+----------------------+--------------------- | | ----------------------+----------------------+--------------------- |Inspecteur Général | ----------------------+----------------------+--------------------- Commissaire Général |Directeur de Santé | ----------------------+----------------------+--------------------- Commissaire de Marine |Médecin en Chef | ----------------------+----------------------+--------------------- Commissaire Adjoint |Médecin Principal |Mécanicien en Chef | | ----------------------+----------------------+--------------------- Sous-Commissaire |Médecin de 1ʳᵉ classe |Mécanicien Principal, | | 1ʳᵉ classe ----------------------+----------------------+--------------------- Aide Commissaire |Médecin de 2ⁿᵈᵉ classe|Mécanicien Principal, | | 2ⁿᵈᵉ classe ----------------------+----------------------+--------------------- |Aide Médecin | | | ----------------------+----------------------+--------------------- At Brest there is a special school of instruction for apprentices, who are received under ordinary restrictions with regard to age and character, and who are obliged to serve for ten years after finishing their apprenticeship. The apprentice school and the schools of instruction for the “inscrits” are amongst the best of their kind in the world, complete records being kept of every man under instruction and the system of rewards being such as to render the inscription a benefit to the seafaring population instead of being a draft on them. All officers, without distinction of corps, below the grade of Capitaine de Frégate, are obliged once in two years to submit to the Minister of Marine an essay on any subject that they may choose that is of interest to the profession. These essays are examined and reported upon by a special committee. Those that are unsatisfactory are returned, and the writer is required to furnish a satisfactory one within three months. Those that are satisfactory are recorded or disposed of by being published at government expense in the _Revue Maritime_ or _Journal Officiel_. Rewards for satisfactory essays range from an honorable mention to promotion and the gift of the “Légion d’Honneur.” Officers showing an especial aptitude are placed on a list for special duty. In this way all departments requiring specialists are filled by the best talent of the service. Promotions are by seniority except in the highest grades. Retirement takes place forcibly after 65 years of age or 45 years of active service. The officers of every corps are graduates of separate naval schools, except in the medical corps, where the naval tutelage consists of a course of naval-hospital practice combined with an advanced course of medical lectures. In time of peace the grade of Admiral is honorary, bringing no especial command except that of appointment by chance to Minister. The marine artillery and infantry do no service in the fleet. The former have charge of the manufacture of ordnance and the garrisoning of naval fortifications; the latter do garrison duty at dock-yards, arsenals, and in the colonies. The Génie Maritime superintend the construction of ships and engines, hydraulic works, buildings, hydrographic work, and civil-engineering duty. They have no duty in the fleet. Machinists have duty almost exclusively in the fleet or in the schools of instruction of firemen. The effective force of the fleet is 1783 officers and 46,500 men; in addition to this force there are 155 officers of Génie Maritime, 825 officers of commissariat, 557 medical officers, 61 chaplains, 63 machinists, 1769 persons connected with the administration; four regiments of marine infantry, 16,000 men; 4500 men of the marine artillery, and 5 companies of gendarmerie with a complement of 660, making a grand total of 71,104 exclusive of the civil employés of the administration. Properly the marine artillery and infantry should be excluded, as their service is principally colonial and carried on by the army in other nations. The French have six foreign-squadron cruising grounds, in which are included the colonial stations. The squadrons are divided as follows: MEDITERRANEAN. 1st. Squadron of evolutions; consisting of from nine to twelve iron-clads and several despatch vessels, having headquarters at Toulon and cruising throughout the sea. 2d. Station of Algiers. 3d. Levant division, consisting of one or two vessels stationed permanently on the Egyptian and Greek coasts, and generally one cruising division of the squadron of evolutions. 4th. Constantinople station; one or two vessels stationed permanently at Constantinople and the mouth of the Danube. NORTH ATLANTIC. 1st. Subdivision of Newfoundland and station of St. Pièrre and Miquelon, a small squadron cruising on the fishing grounds. 2d. Division of the Antilles, a small squadron cruising on the United States, Mexican, and Central American coasts. 3d. Three stations of Martinique, Guadaloupe, and Guiana. SOUTH ATLANTIC. 1st. South Atlantic division, cruising on the Brazilian coast. 2d. Senegal station, on the west coast of Africa. CHINA SEAS. 1st. China seas division, cruising on the coast of China and Japan. 2d. Station of Cochin China, with cruisers on that coast, Siam, and the Dutch East Indies. INDIAN SEAS. Indian station, with cruisers at each of the French possessions. PACIFIC OCEAN. 1st. Pacific division, cruising on the west coast of South America. 2d. Tahiti station. 3d. New Caledonia station. These stations require during peace a total of about 75 vessels and 11,000 men. GERMANY. The navies of the different states of the empire are consolidated into a single one under the chief command of Prussia, controlled by an Imperial Ministry. The cabinet representative of the navy is chosen from amongst the General officers of the army, bearing, whilst Minister of Marine, the honorary title of Admiral, and having naval officers for his immediate staff. The Imperial Admiralty is divided into three grand sections: 1st. The Military Section, composed of the Bureaus of Mobilization, Naval and Military Affairs, General Military Affairs, Instruction, Exploration and Coast Defence, Justice, Sanitary and Medical Affairs. 2d. The Technical Section, composed of the Bureaus of Equipment, Docks, Construction of Vessels, Construction of Engines, Construction of Ordnance, Construction of Torpedoes and Torpedo Defence. 3d. The General Section, composed of Bureaus of Constructional Affairs, Budget and Pay, Administration of Garrisons, Indemnities, Judiciary, Hydrography, and Observatory. In addition to these sections there are connected with the Admiralty: 1st. A Commission for the Examination of Officers of Marine Superintendence. 2d. The Administration of the Naval Stations of Kiel, Wilhelmshaven, Dantzic, and Friedrichsort, and the Naval Academy. The navy is manned by inscription from the maritime districts, the obligation of service commencing on the 1st of January of the year in which the age of 20 is reached. Active service continues for three years, at the end of which time men pass into the First Reserve for a further period of seven years, during which time they are called for exercise twice in four years in time of peace, and on the breaking out of war they are called into active service. At the end of the seventh year in the first reserve they pass into the second reserve for a further period of five years (seewehr). The Second Reserve also includes those who have been subject to service but who have not been called on: these latter are exercised twice in twelve years. Sailors of the merchant marine are authorized to present themselves between the ages of 20 and 24 years. Mariners who have followed the sea for five years have only to serve for one year; those who have been to sea four years serve two years. For tradespeople and mechanics the term of active service may be reduced to one year. The maritime population of Germany is estimated at 45,000 men, of which number 12,000 may be called into service at any time, not counting sailors of the merchant service absent from home. The cadre of the executive corps of officers is as follows: 1 Admiral (Honorary). 1 Vice-Admiral. 4 Contre-Admiral. 23 Capitän zur See. 45 Corvetten Capitän. 75 Capitän-Lieutenant. 148 Lieutenant zur See. 128 Unter-Lieutenant zur See. 100 See Cadet. The sailors of the fleet, divided into two divisions, one being stationed at Kiel and the other at Wilhelmshaven, number 821 petty officers and 5621 men. There is also one division of apprentices, numbering 12 petty officers and 400 boys. Apprentices are entered between the ages of 14 and 16, and engage to serve for twelve years. The first two years they are placed aboard cruising school-ships, and for another year they are under general harbor instruction. At the end of the third year they pass into the fleet, and if successful in their examinations they are promoted at once to seamen. Officers of the Second Reserve are recruited from five different sources: 1st. From officers who have retired from active service and who are less than 31 years old. 2d. From masters of the merchant marine. 3d. From one-year volunteers who are seafaring people. 4th. From certain auxiliary officers. 5th. From young men who have successfully passed a master’s examination. Persons from the last three categories must serve for one year at least in the fleet, at the end of which time they receive the brevet of Sub-Lieutenant of Reserve. Officers of the Reserve may be promoted after a certain length of service to the grades of Lieutenant and Lieutenant-Captain, and if they are under 24 years of age they may pass into the active roster. Machinists are recruited from volunteers and also from tradespeople of the inscription, and before entering the fleet they pass through a course of dock-yard instruction. In the permanent fleet there are 24 Machinist-Engineers, divided into 3 Superior Engineer-Machinists, 9 Engineer-Machinists, and 12 Sub-Engineer-Machinists. The total cadre of the dock-yard division, which includes machinists, petty officers, mechanics, firemen, and coal-heavers, numbers 1475 men. In the Pay Department there are 26 Commissaries and 29 Sub-Commissaries. The Medical Corps comprises 1 Surgeon-General, 5 Surgeon-Majors, 17 Surgeon-Majors (subs), and 22 Assistant Surgeons divided into three classes. The Marine Infantry consists of a single battalion of six companies, organized in a similar manner to the line of the army, and comprising in its cadre 47 officers and 984 men, there being a Colonel in command. The officers are all recruited from regiments of the line. The detachment of Marine Artillery is composed of three companies organized similarly to the Fortress Artillery of the army; 112 officers and 346 men. This detachment mans the batteries and coast-works under the control of the navy. In time of peace it is employed principally in the fabrication of munitions. The officers are all recruited from army artillery regiments. Attached to the infantry battalion is a small body called the staff-guard, consisting of 52 Sergeant-Majors and Sergeants, who have charge of the police duties aboard ship and at the dock-yards. The Technical Corps of Officers forms two divisions, one of Naval Constructions and the other of Engine Constructions, having grades not assimilated with those of officers of the fleet. There are 62 officers in the corps. CONSTRUCTION. ENGINES. Directors 3 3 Superior Engineers 4 3 Engineers 11 11 Sub-Engineers 13 9 At Kiel a Naval Institute has been established on the same principles as the Greenwich Royal Naval College, for the benefit of officers of higher rank than cadet. Officers as high as the grade of Captain are admitted for a course of two years. By this means the standard of general efficiency is raised. Officers receive instruction in all branches of their profession. The men of the fleet are divided into two divisions, one being stationed at Kiel and the other at Wilhelmshaven. Each division is subdivided into two classes. To pass from the second to the first class, good conduct, a service at sea of 48 months, and a certificate of complete instruction is required. The men of the first class receive a higher pay and form the body of the petty officers of the fleet. Firemen and coal-heavers may, by proper application, pass through the grades of Machinist to the Corps of Engineer Machinists. In general the Machinists are all drawn from apprentices of that class. The Germans are just commencing the introduction of permanent foreign squadrons. HOLLAND. The King of Holland is Commander-in-Chief of the Dutch Navy, the Crown Prince being Rear-Admiral and Chief of Staff. The navy is represented in the Cabinet by a civilian Minister of Marine, the central control being divided into sections and bureaus in a similar manner to that of other European nations. The general administration is centralized at four dock-yard stations—Amsterdam, Willemsoord, Hellevoetsluis, and Fijenoord—Amsterdam being the principal building-yard, and Fijenoord being the boiler and engine factory. The grades of the Dutch Navy correspond with those of other services, the names of those of the executive corps being: Luitenant-Admiraal. Vice-Admiraal. Schout-bij-Nacht. Kapitein ter Zee. Kapitein Luitenant ter Zee. Luitenant ter Zee 1ᵉ klasse. Luitenant ter Zee 2ᵉ klasse. | 1ᵉ klasse. Adelborst | 2ᵉ klasse. | 3ᵉ klasse. In addition to the dock-yard at Amsterdam there is a Naval School and school-ships for the instruction of seamen and apprentices. At Hellevoetsluis there is a school for machinists. Great attention is paid in Holland to the development of torpedo instruction, a special corps of officers being drawn from the executive corps. The cadre of the navy is filled from both volunteer and inscription methods, the latter resembling the French. This cadre amounts to 788 officers and 6426 men, not including 1000 native sailors and 600 marines in the East Indian local service. In addition to this force there is a corps of Marine Infantry amounting to 52 officers and 2100 men. There are two main divisions of the Dutch fleet, the first for home service and the second for East India service. The foreign squadrons are: 1. The Curaçao station. 2d. The Surinam station. 3d. The East India fleet, which is divided into three main squadrons and four subordinate flotilla stations for the purpose of patrolling the coasts of Borneo, Sumatra, Java, and the Celebes Islands. Single cruisers are sent out at short periods to make cruises around the world, whilst a large division is kept ready for service in the shallow home waters. ITALY. The Italian Navy is represented in the Cabinet by a Minister of Marine. The central administration is divided into four main departments: 1st. The Personnel, under the control of a Secretary-General. 2d. The Matériel. 3d. Artillery and Torpedoes. 4th. Merchant Marine. There is an Admiralty Council for the general consideration of naval affairs, and a Scientific Bureau for the regulation of hydrographic affairs. The general arrangement of bureaus and superintendencies is similar to that of France, the whole central department being classed under the head of the General Staff. For the general administration of affairs, there are two dock-yard stations, Spezzia and Venice, with a third in process of formation at Tarenta. The grades of the executive corps of the service are as follows: Ammiragle. Vice-Ammiragle. Contro-Ammiragle. Capitano di Vascello. Capitano di Fregato | 1ᵃ classe. | 2ᵃ classe. Luogotenento di Vascello. Sottotenento di Vascello. Guardia Marina di 1ᵃ classe. All of the officers of this corps are drawn from the cadets of the Naval School, the course being four years of instruction. At present the cadets pass two years at Naples and two at Genoa, but it is the intention to establish a single Academy at Spezzia. There are three divisions of this corps: the active, the reserve or retired, and the officers at stationary residence, the latter being those who have waived promotion in consideration of having fixed duties at a seaport. The Medical Corps is divided in the same manner as in other countries, the grades being: Medico Ispettore. Medico Direttore. Medico di Vascello. Medico di Fregata, 1ᵃ classe. Medico di Fregata, 2ᵃ classe. Medico di Corvetta |1ᵃ classe. |2ᵃ classe. The Technical Corps or Corps du Génie and the Commissary Corps are called the naval auxiliary corps. GÉNIE. Ispettore Generale. Direttore delle Costruzioni Navali. Ingegnere di 1ᵃ classe. Ingegnere di 2ᵃ classe. Sotto Ingegnere di 1ᵃ classe. Sotto Ingegnere di 2ᵃ classe. Allieve Ingegnere (Cadet). COMMISSARIAT. Commissario Generale di 1ᵃ classe. Commissario Generale di 2ᵃ classe. Commissario di 1ᵃ classe. Commissario di 2ᵃ classe. Sotto Commissario di 1ᵃ classe. Sotto Commissario di 2ᵃ classe. Sotto Commissario di 3ᵃ classe. Sotto Commissario Aggiunto di 1ᵃ classe. Sotto Commissario Aggiunto di 2ᵃ classe. Scrivano (Clerk). These corps at present have relative military rank, but measures have been taken to give both a strictly civil organization, as it is considered that their duties are not compatible with military subordination. The Machinists’ Corps comprises but three grades— Machinists. First Chief Machinists. Second Chief Machinists. These grades are entirely recruited from the master-machinists or petty-officers grade of firemen. The grade of Chief Machinist, which was the highest until of late years, has been abolished, the duties being performed by officers of the Corps du Génie. For the purpose of naval inscription the coast of Italy is divided into three departments, Spezzia, Naples, and Venice, subdivided into 22 districts, under controls similar to those of France. All persons interested in a trade bearing upon navigation are liable for service on reaching the age of 20. They are then drawn into one of two divisions according to lot. The first is under obligations to render service for four years either at sea or in the dock-yards, at the end of which time they are granted a leave for six years, which, though not confining them to the country, may be rescinded at any time. At the end of the tenth year they pass into the Second Reserve, and are not liable except for extraordinary service. The second division receive at once a leave for ten years, at the end of which time they pass to the Second Reserve. There is also a system of voluntary enlistment and apprenticeship. The Corps of Marine Infantry is recruited from the inscription in the same manner as the army. The headquarters are at Naples. This corps is made up of three battalions (one for each department), and the service is divided between the fleet and the dock-yards. There is no marine artillery in the Italian Navy. The effective cadre of the Italian Navy is 1084 officers and 14,200 men, 90 officers of Marine Infantry and 3000 men. In comparison with the number of petty officers and men, there are fewer officers in this navy than in any in the world. The Italians have no cruising squadrons; single vessels do the foreign service, while the home service is confined to a single large squadron of evolutions. JAPAN. The navy is represented in the Council of State by a Minister and two Vice-Ministers, the central administration being carried on by a department constructed much in the same manner as in most European countries. The general administration is at present also almost entirely directed by the Navy Department. There is but one dock-yard at present completed and in operation, that of Yokoska in the Bay of Yeddo, in connection with which there is quite an extensive foundry at Yokohama. At Nagasaki, although there is no especial dock-yard, there are repair-shops, a marine railway, and a partially completed dry-dock. At Kobi there are repair-shops, and an attempt has been made to establish a dock-yard at Tokio, but the shallow approaches render it of but little importance. Connected with the central administration there is a Hydrographic Office, Observatory, Naval School, and schools of instruction for Marine Infantry and Artillery. At present the navy is manned entirely from volunteer enlistment, but a system of inscription is being perfected by which every person following a maritime trade will be liable for service between the ages of 18 and 45. The officers heretofore have for the greater part been educated in foreign naval schools, but at present the Naval Academy at Tokio is fully equal to the task of keeping the cadre full. This Naval School is modelled after the general European plan, the course being four years. Officers, as a rule, are appointed from the Noble class. The cadre of the navy at present is 300 officers, 5138 men, and 113 cadets. The grades and corps correspond closely with those of foreign powers. But very few foreign officers are now employed in the naval service, none at all in the fleet, their duties being confined to instructional and yard superintendence. As yet the Japanese have not instituted any squadron service whatever, keeping nearly every vessel of their fleet in constant commission for instructional service. It is the intention, however, to establish both home and foreign squadron service as soon as the naval development will permit it to be done. The cadre of the Japanese Navy is 1180 officers and 4270 men. NORWAY AND SWEDEN. The navies of Norway and Sweden are distinct services, each having its own complete organization and administration. The Norwegian Navy is represented in the Cabinet by a Rear-Admiral, Chief of the Marine Department, who is assisted by a second Rear-Admiral, Chief of Staff. The central control at Stockholm is divided into three main sections, with Controllers at their heads, and subdivided into bureaus. The general administration is divided in control between two dock-yards, Christiania and Stockholm. There is also a Naval Academy, Hydrographic Office, and Observatory. The Swedish Navy is represented in the Cabinet by a Minister of Marine, the central control having two main divisions, Chancellery and Command. There is in addition a Commander-in-Chief of Personnel, a Military Department, Construction Department, Commissariat Department, Pilotage Department, Naval School, and Hydrographic Office. The general administration is divided between the two naval stations of Carlskrona and Stockholm. The personnel of both navies is recruited by voluntary enlistment, there being a special arrangement for conscription, in case of war in the maritime districts, of all persons between the ages of 22 and 35 years. The grades of officers of the different corps are similar to those of other services, there being no grade of Admiral. The cadre of the two navies is: SWEDEN. NORWAY. Officers 518 Officers 104 Men 5,051 Men 550 ——— Total 6,223 The Norwegian fleet is entirely confined to coast-defence vessels, no cruisers being now sent out. The Swedish fleet is well provided with cruisers, but there are no foreign squadrons, the foreign cruising being confined to single ships. RUSSIA. The Russian Navy is represented in the Council of State by the Admiral-General, a prince of the blood, who is Commander-in-Chief of the naval force. The head of the central administration is a Minister chosen from the list of Vice-Admirals. There are six sections or departments of control: 1st. The Chancellery, having charge of the expenditure of the Budget. 2d. The Department of the Personnel. 3d. The Hydrographic Department. 4th. The Technical Committee, divided into three sections—Construction of Vessels, Construction of Machinery, and Construction of Ordnance. 5th. The Supreme Naval Tribunal. 6th. The Direction of the Health Service. The general administration is divided between the naval stations of St. Petersburg, Sebastopol, Odessa, and the naval stations of the Caspian and Aral seas and Petropaulovsk on the Amoor River. The personnel of the Russian Navy is recruited by inscription throughout the maritime districts, the inscription carrying with it certain benefits to the seafaring population, as in other countries. There are two divisions, active and reserve, the time of service being seven years in the active division and three in the reserve. The grades correspond with those of other navies. The effective strength is 4219 officers and 26,683 men. The fleet is divided into five divisions with squadron sub-divisions: 1st. The Baltic Fleet, divided into the Squadron of Evolutions, Division of School-ships, Lighthouse and Survey Squadrons, and Cruisers, the latter being engaged in long foreign cruises independently. 2d. Black Sea Fleet, Division of School-ships, Coast Guard-ships, Lighthouse Service, Hydrographic Service, Port Guard-ships, and Cruisers confined to the Black and Mediterranean seas. 3d. The Caspian Flotilla. 4th. The Siberian Flotilla. 5th. All vessels in course of construction at St. Petersburg or Odessa. SPAIN. The Minister of Marine is invariably chosen from the grades of Vice or Rear Admiral, having an officer of one of these grades as an Assistant Secretary and Chief of Staff. The affairs of the Ministry are controlled by bureaus and sections, with special committees for the regulation of certain special affairs. For the immediate superintendence of the naval administration the Spanish coast is divided into three departments, each commanded by an officer of high rank. The headquarters of the Department of the East are at Cartagena, those of the South at Cadiz, and those of the North at Ferrol; the Eastern Department including the Balearic Isles, and the Southern the Canaries. Cuba and Porto Rico form a fourth department, with headquarters at Havana; and the Philippine Islands a fifth, with headquarters at Manila. The Commander-in-Chief of the department is also in command of the fleet at the station. For the purposes of naval inscription the departments are subdivided into provinces and districts, there being in all 110 districts, each of which is in charge of a naval officer so far as marine inscription is concerned. The corps and grade divisions of the active personnel correspond with those of other nations, the grades of the executive corps being as follows: Almirante. Vice-Almirante. Gefe de Escuadra. Capitän de Navio. Capitän de Fregata. Teniente de Navio |1ᵃ cl. |2ᵃ cl. Alfarece de Navio. Guardia Marina. The grades of the Medical Corps are: Medical Inspector. Medical Sub-Inspector. Surgeon-Major. First Surgeon. Second Surgeon. The grades of the Commissary Corps are: Superintendent. Purveyor (1st class). (2d class). Commissary (1st class). (2d class). First Asst. Commissary. Second Asst. Commissary. Third Asst. Commissary. Supernumeraries. Chaplains have their ecclesiastical rank, and also a naval grade: Sub Vicar-General. First Chaplain. Second Chaplain. Sacristan (lay official). Chorister (lay official). The Technical Corps embraces in one body the ship and engine constructors, called Engineers of the Fleet, and having the grades of— General Officer. Brigadier. Ship-of-the-Line Captain. Frigate Captain. Lieutenant. Ensign. For service in working engines aboard ship there is a corps of machinists: First Machinists |1st class. |2d class. Second Machinists. Third Machinists. Fourth Machinists. Assistant Machinists. The total active personnel of the fleet is 1792 officers (exclusive of Midshipmen, Chaplains, and the Technical Corps) and 14,000 men. In addition to this cadre, there is a corps of Marine Artillery (Technical). 1 General Officer. 3 Colonels. 7 Lieutenant-Colonels. 16 Captains. 20 Lieutenants. And a corps of Marine Infantry which is divided into two half brigades of two battalions each, besides two companies of native infantry at the Philippines. The strength of this corps is 170 officers and 6256 men, making a grand total of 1962 officers and 20,256 men. For the administration of justice each department has a district court, the maritime superior court being at Madrid. The Naval Academy, situated at Ferrol, furnishes all the officers of the executive corps of the service. The age of entrance to the Academy is between 12 and 14 years, the length of the course at the school being two years and a half. At the expiration of this time they pass to a school-ship as second-class midshipmen, where they remain one or two years according to the needs of the cadre, when they pass to active service as midshipmen of the first-class, and after one year are commissioned Ensigns (Alfarece). There are special schools under naval control for the education of pilots of the merchant service, another school for machinists, and an academy for the Artillery and Technical Corps. At Madrid there is a Hydrographic Bureau and a Naval Museum, and at San Fernando a Naval Observatory. The Spanish have five squadron cruising-grounds: the Mediterranean, South American, West Indian, Asiatic, and Atlantic, and a small African station limited to the Spanish possessions in the Gulf of Guinea. At each of the prominent ports both of the home and colonial coasts there is a naval control under the superintendence of a Captain of the Port. Promotion in all grades of the service except to that of Rear-Admiral is by seniority. Rear-Admirals are appointed by choice from the list of Line-Ship Captains. All persons in the maritime districts who follow a calling connected in any way with the sea are subject to the inscription, and none but those who are inscribed can engage in fishery or work upon the wharves or piers. The term of service is four years in the active and four in the reserve division. Each department has a separate school-ship and divisional formation, so that those persons who are inscribed are seldom removed from their immediate homes except for short cruises. There is a system of voluntary enlistment by which the main part of the active cadre is kept constantly full. In Spain as in Italy the merchant service is entirely under the control of the navy. In the headquarter ports of Spain, unlike those of other nations, the Commander-in-Chief has no flag-ship and does not display a broad pennant. Flag-ships represent strictly the commands afloat. This is a point of importance, as all ports visited by foreign men-of-war have a commanding naval authority of high rank, although there is no visible sign of such command. TURKEY. The navy is represented in the Cabinet by a Minister of Marine and in the Divan or Chancellery by an Assistant Secretary. For the central administration there is an Admiralty Council composed of Admirals and General Officers. The service is divided into four sections: 1st. Personnel. 2d. Matériel. 3d. Naval Constructions. 4th. Health. Each control has an Admiral at its head with the title of Director. The Minister has the supreme control of all naval affairs. The fleet is recruited by inscription from the maritime districts, there being no reserve proper. The length of service is eight years. The personnel of the navy consists of 1868 officers and 30,000 men, in addition to which there is a corps of marine infantry numbering 91 officers and 4500 men. The grades correspond with those of other countries except that there is no grade of Admiral, and the grade of Ensign corresponds closely with that of Midshipman in other services, there being no Naval Academy and no grade of Cadet. UNITED STATES. The navy is represented in the Cabinet by a Secretary of the Navy, who is invariably a civilian; the President of the United States being the Commander-in-Chief, but without any immediate naval executive. The central control is divided into eight bureaus under the superintendence of naval officers of the different corps having the grade of Commodore: 1st. Bureau of Navigation, subdivided into the Office of Detail, having charge of the personnel of the fleet; Hydrographic Office, Naval Observatory, and Signal Office. 2d. Bureau of Ordnance, having charge of all artillery matters, including the torpedo station at Newport. 3d. Bureau of Equipment and Recruiting, having charge of outfits, recruiting, and the apprentice service. 4th. Bureau of Yards and Docks, having charge of all naval grounds and buildings. 5th. Bureau of Medicine and Surgery. 6th. Bureau of Provisions and Clothing, having charge of supplies and accounts. 7th. Bureau of Steam Engineering, having charge of the design and care of engines and boilers. 8th. Bureau of Construction and Repair. The Naval Academy is under an independent control attached directly to the superintendence of the Secretary of the Navy. The general administration is divided into departments at the different dock-yards, each department corresponding with a bureau of the central control, and all under the superintendence of a commandant who is an officer of the executive corps having the grade of Commodore. There are no naval maritime districts in the United States, naval authority being limited strictly to the dock-yard government. There are seven dock-yards: Portsmouth (New Hampshire), Charlestown (Massachusetts), Brooklyn (New York), League Island (Pennsylvania), Norfolk (Virginia), Pensacola (Florida), and Mare Island (California). In addition to these there are three subordinate stations for coaling, recruiting, and repairing: New London (Connecticut), Port Royal (South Carolina), and Key West (Florida). The Coast Survey and Lighthouse establishments, although not under the control of the Navy Department, employ naval officers almost exclusively. ASSIMILATED GRADES OF THE CORPS OF THE UNITED STATES NAVY. ================================================================== EXECUTIVE CORPS. | MEDICAL CORPS. | PAY CORPS. | | ----------------------+--------------------+---------------------- Admiral | | Honorary | | Vice-Admiral | | ----------------------+--------------------+---------------------- Rear-Admiral | | Commodore |Surgeon-General |Paymaster-General ----------------------+--------------------+---------------------- Captain |Medical Director |Pay Director Commander |Medical Inspector |Pay Inspector Lieutenant-Commander |Surgeon |Paymaster ----------------------+--------------------+---------------------- Lieutenant |Passed Asst. Surgeon|Passed Asst. Paymaster Master | ” ” ” | ” ” ”e ----------------------+--------------------+---------------------- Ensign |Assistant Surgeon |Assistant Paymaster Midshipman | | Cadet Midshipman | | Cadet | | ----------------------+--------------------+---------------------- =================================================================== ENGINEER CORPS. |CONSTRUCTORS’ CORPS.| CORPS OF CHAPLAINS AND | | PROFESSORS. ---------------------+--------------------+------------------------ | | | | ---------------------+--------------------+------------------------ | | Engineer-in-Chief |Chief Constructor | ---------------------+--------------------+Officers of these corps | | bear the names of Chief Engineer |Naval Constructor | Chaplain and Professor, | | the grades being ---------------------+--------------------+ from Captain to Passed Asst. Engineer| Assistant Naval | Lieutenant, except ” ” ” | Constructor | that there is no grade ---------------------+--------------------+ to correspond with Assistant Engineer | | Lieut.-Commander. | | Cadet Engineer | | Engineer Cadet | | ---------------------+--------------------+------------------------ Officers of the Executive and Engineer Corps are drawn exclusively from graduates of the Naval Academy. The other corps are drawn from civil life. Promotion is strictly by seniority in all grades. All officers except those in the Constructors’ and Professors’ Corps are obliged to pass a rigid examination in being promoted from one grade to another. The course of study at the Naval Academy is four years for both executive and engineer officers; the cadet then passes into the fleet for a period of two years for active service, at the end of which time he is eligible for promotion to the next grade. On reaching the age of 62 years or after 45 years of service, officers are retired from the active list. Officers failing twice in examination for promotion may be retired as mentally unqualified for active service. In addition to these grades, in the regular line of promotion there are five subordinate; grades of what are called Warrant Officers namely, Boatswain, Gunner, Carpenter, Sailmaker, and Mate. The cadre of the active list of the navy is 1678 officers, 7500 men, and 700 apprentices. There is also a corps of Marine Infantry numbering 75 officers and 2500 men. The method of enlistment is entirely voluntary, for periods of three years, with special inducements for re-enlistment. There is no reserve division of the service, the active cadre representing the entire disposable force. Apprentices are enlisted between the ages of 14 and 18, with obligatory service until they reach the age of 21. They are first put in training-ships, where they remain between two and three years, entering the fleet as soon as they are considered fully instructed. After entering the fleet they are eligible to advancement as seamen and petty officers. The cruising fleet is divided into five squadrons—the North Atlantic, South Atlantic, European, Asiatic, and Pacific—with one vessel in constant commission cruising in the chain of great lakes on the northern boundary, and one in the Rio Grande on the Mexican boundary. Four ships (one steam frigate and three sailing corvettes) are also kept constantly in commission as cruisers with apprentices for instruction. The iron-clad fleet is kept in partial commission ready for service, but in fresh water, in order to prevent the fouling and corrosion of the bottoms. DENMARK. The navy is represented in the Cabinet by a Minister of Marine, the central administration having an officer of high rank at its head, bearing the title of Director-General. The control is divided into three sections: 1st. The Admiralty. 2d. The Commissariat. 3d. The Judiciary. The Admiralty is subdivided into departments of Personnel, Matériel, and Health. Grades of personnel are similar to those of other navies. The cadre of the navy is 120 officers and 2761 men. There are no foreign cruisers. GREECE. The navy is represented in the Cabinet by a Minister of Marine, and the central control is superintended by an Admiral bearing the title of Inspector-General of the Fleet. The grades of officers correspond to those of other navies. The cadre of the personnel of the fleet is 71 officers and 581 men. PERU. The navy is not a separate organization, being represented in the Cabinet by a Minister of War, and having at its head an Admiral Commander-in-Chief. The control is confined to the port of Callao, where in time of peace the fleet is kept almost permanently at anchor. Administration and cadre unknown. PORTUGAL. The navy of Portugal is represented in the Cabinet by a Minister of Marine, who has also the Colonial Service under his jurisdiction, as with the French. The King of Portugal is Commander-in-Chief of the navy (taking the rank of Admiral amongst his titles), the immediate executive control of the naval personnel being superintended by a Vice-Admiral Commander-in-Chief, assisted by a Board of Admiralty. Both the central and general controls are at Lisbon, where is situated the only dock-yard. The grades of the personnel of the Portuguese Navy are similar to those of other nations. The cadre is 393 officers and 3200 men. The Portuguese fleet is distributed in squadrons at the different colonial stations, although they do but little cruising. A squadron is kept in commission at Lisbon, cruising to Madeira and the African coast in the fall of the year. In addition to the dock-yard there is a Naval School and Observatory, and a small repair-yard at Oporto. The navy is recruited by voluntary enlistment. NAVAL BUDGETS. TOGETHER WITH THE PROPORTION WHICH THEY BEAR TO THE ENTIRE EXPENSES OF THE GOVERNMENT FOR THE CORRESPONDING YEAR. (IN DOLLARS OF AMERICAN COIN.) ====+===========+====+===========+====+==========+===+===========+=== | AUSTRIA. | | BRAZIL. | | DENMARK. | | ENGLAND. | ----+-----------+----+-----------+----+----------+---+-----------+--- 1875| $5,038,980|¹/₁₁|$10,737,267|¹/₇ |$1,258,180|¹/₁₀|$53,447,020|¹/₇ 1876| 4,705,090|¹/₁₂| 11,992,977|¹/₆ | 1,193,700|¹/₁₂| 55,317,245|¹/₇ 1877| 4,705,090|¹/₁₂| 5,467,730|¹/₁₁| 1,193,700|¹/₁₂| 56,821,915|¹/₇ 1878| 4,805,480|¹/₁₂| 5,467,730|¹/₁₁| 1,323,308|¹/₉ | 54,892,960|¹/₁₁ 1879| 4,354,900|¹/₁₆| 6,138,301|¹/₇ | 1,589,418|¹/₈ | 59,811,580|¹/₁₀ ====+===========+====+===========+====+==========+====+===========+=== | FRANCE. | | GERMANY. | | GREECE. | | HOLLAND. | ----+-----------+----+-----------+----+----------+----+-----------+--- 1875|$27,277,496|¹/₁₉| $4,511,955|¹/₂₂| $360,070|¹/₂₂| $2,617,994|¹/₈ 1876| 27,277,496|¹/₁₉| 5,267,120|¹/₁₉| 391,978|¹/₂₀| 2,726,517|¹/₉ 1877| 73,253,303|¹/₈ | 7,144,250|¹/₁₉| 422,941|¹/₂₀| 2,781,076|¹/₉ 1878| 32,592,387|¹/₁₇| 14,672,671| ¹/₉| 426,941|¹/₂₀| 2,753,677|¹/₉ 1879| 32,183,416|¹/₁₇| 11,434,197|¹/₁₂| 749,731|¹/₁₉| 2,627,732|¹/₉ ====+===========+====+===========+====+==========+====+===========+=== | ITALY. | | JAPAN. | |NORWAY AND| | PORTUGAL. | | | | | | SWEDEN. | | | ----+-----------+----+-----------+----+----------+----+-----------+--- 1875| $7,468,184|¹/₃₉| $1,800,000|¹/₂₆|$1,526,275|¹/₁₈| $1,468,800|¹/₂₀ 1876| 7,543,390|¹/₃₅| 2,700,000|¹/₂₅| 1,725,350|¹/₁₇| 1,554,406|¹/₁₉ 1877| 8,326,156|¹/₃₄| 3,549,700|¹/₂₀| 2,204,040|¹/₁₆| 1,878,665|¹/₁₇ 1878| 8,870,282|¹/₃₂| 3,217,500|¹/₁₇| 1,944,875|¹/₁₆| 1,876,264|¹/₁₇ 1879| 8,864,877|¹/₃₂| 2,636,300|¹/₂₇| 1,896,750|¹/₁₇| 1,952,837|¹/₁₆ ====+===========+====+===========+====+==========+====+===========+==== | RUSSIA. | | SPAIN. | | TURKEY. | | UNITED | | | | | | | | STATES. | ----+-----------+----+-----------+----+----------+----+-----------+--- 1875|$20,084,813|¹/₂₂| $6,560,355|¹/₁₈|$2,600,000|¹/₃₈|$23,000,000|¹/₁₄ 1876| 20,030,705|¹/₂₃| 6,536,235|¹/₁₈| 3,200,000|¹/₃₆| 21,497,626|¹/₁₄ 1877| 19,895,028|¹/₂₃| 5,739,806|¹/₂₃| 3,200,000|¹/₃₆| 18,963,310|¹/₁₆ 1878| 18,839,706|¹/₂₅| 5,196,955|¹/₂₈| 2,560,000|¹/₂₂| 14,959,935|¹/₁₇ 1879| 20,956,465|¹/₂₄| 5,196,955|¹/₂₈| 2,560,000|¹/₂₂| 17,365,301|¹/₁₄ ----+-----------+----+-----------+----+----------+----+-----------+--- KRUPP’S CAST-STEEL COAST AND NAVAL GUNS OF 30 AND 35 CALIBRES LENGTH. =========================================+================+================+================= | 12 cm. | 15 cm. | 17 cm. +-------+--------+-------+--------+--------+-------- | Of 30 | Of 35 |Of 30 | Of 35 | Of 30 | Of 35 | calib.| calib. |calib. | calib. | calib. | calib. |length.|length. |length.| length.| length.|length. -----------------------------------------+-------+--------+-------+--------+--------+-------- Calibre mm| 120 | 120 | 149.1 | 149.1 | 172.6 | 172.6 Total length ”| 3600 |4200 |4470 | 5220 | 5180 | 6040 Length of bore ”| 3275 |3875 |4050 | 4800 | 4695 | 5555 Weight of gun kg| 2015 |2260 |4200 | 4750 | 6700 | 7500 Weight of steel shell ”| 20 | 20 | 38.5 | 38.5 | 60 | 60 Battering charge ”| 9 | 9 | 17 | 17 | 26 | 26 Muzzle-velocity m| 575 | 605 | 575 | 605 | 575 | 605 -----------------------------------------+-------+--------+-------+--------+--------+-------- total mt| 337.03| 373.12 | 649 | 718 | 1011.1 | 1119.4 Energy per cm. of circumference ”| 8.94| 9.90 | 13.85| 15.34| 18.18| 20.13 per cm². of cross section ”| 2.98| 3.30 | 3.71| 4.1 | 4.32| 4.78 per 1000 kg of weight of gun ”| 167.2 | 165 | 155 | 151 | 151 | 149 -----------------------------------------+-------+--------+-------+--------+--------+-------- of 500 m m| 516.5| 543 | 526.7 | 554 | 533.3 | 560.5 Remaining ” 1000 ” ”| 464.5| 487.5 | 482 | 506.7 | 494.5 | 520 velocity ” 1500 ” ”| 418.5| 438.5 | 442 | 464 | 458.6 | 482 of steel ” 2000 ” ”| 380 | 397 | 406.7 | 426.3 | 425.5 | 447 shell ” 2500 ” ”| 348.5| 362 | 375 | 393 | 397 | 415.8 -----------------------------------------+-------+--------+-------+--------+--------+-------- ” 500 ” mt| 271.9| 300.5 | 544.4 | 602.3 | 869.7 | 960.8 ” 1000 ” ”| 219.9| 242.2 | 455.9 | 503.8 | 747.8 | 826.9 total ” 1500 ” ”| 178.5| 196 | 383.4 | 422.5 | 643.1 | 710.5 ” 2000 ” ”| 147.1| 160.7 | 324.59| 356.6 | 553.7 | 611.04 ” 2500 ” ”| 123.8| 133.6 | 276 | 303.1 | 482 | 528.7 ------------------------------+-------+--------+-------+--------+--------+-------- ” 500 ” ”| 7.21| 7.97 | 11.62| 12.86| 15.65| 17.28 per cm. ” 1000 ” ”| 5.83| 6.43 | 9.73| 10.75| 13.45| 14.87 Energy of ” 1500 ” ”| 4.74| 5.20 | 8.18| 9.02| 11.57| 12.78 circumfer- ” 2000 ” ”| 3.90| 4.26 | 6.93| 7.61| 9.96| 10.99 ence ” 2500 ” ”| 3.28| 3.54 | 5.89| 6.47| 8.67| 9.51 ------------------------------+-------+--------+-------+--------+--------+-------- ” 500 ” ”| 2.40| 2.66 | 3.12| 3.45| 3.72| 4.11 per cm² ” 1000 ” ”| 1.94| 2.14 | 2.61| 2.89| 3.20| 3.53 of cross ” 1500 ” ”| 1.58| 1.73 | 2.20| 2.42| 2.75| 3.04 section ” 2000 ” ”| 1.30| 1.42 | 1.86| 2.04| 2.36| 2.61 ” 2500 ” ”| 1.09| 1.18 | 1.58| 1.74| 2.06| 2.26 -----------------------------------------+-------+--------+-------+--------+--------+-------- When striking at the muzzle at a | | | | | | at right angles distance cm| 23.5 | 25.5 | 29.5 | 31.5 | 34 | 37 the steel shell of 500 m ” ”| 20 | 22 | 26 | 28 | 30.5 | 33 penetrates a ” 1000 ” ” ”| 17 | 18.5 | 22.5 | 24.5 | 27 | 29.5 wrought Iron-Plate ” 1500 ” ” ”| 15 | 16 | 20 | 21.5 | 24 | 26 of the following ” 2000 ” ” ”| 13 | 14 | 17.5 | 18.5 | 21.5 | 23.5 thickness ” 2500 ” ” ”| 11 | 12 | 15.5 | 16.5 | 19.5 | 21 -----------------------------------------+-------+--------+-------+--------+--------+-------- at the muzzle at | | | | | | a distance cm|10 + 18|10 + 20 |15 + 20|15 +22.5|18 + 22 |18 + 25.5 Or two plates of of 500 m ” ”|10 + 14|10 + 16 |15 + 16|15 + 18 |18 + 18 |18 + 21 the following ” 1000 ” ” ”|10 + 11|10 +12.5|15 + 12|15 + 14 |18 +14.5|18 + 17 thickness ” 1500 ” ” ”|10 + 8|10 + 9 |15 + 8|15 + 10 |18 +11 |18 + 13 ” 2000 ” ” ”|10 + 5|10 + 6.5|15 + 5|15 + 7 |18 + 7 |18 + 9.5 ” 2500 ” ” ”|10 + 3|10 + 4 |15 + 1|15 + 4 |18 + 3.5|18 + 6 -----------------------------------------+-------+--------+-------+--------+--------+--------- KRUPP’S CAST-STEEL COAST AND NAVAL GUNS OF 30 AND 35 CALIBRES LENGTH.—(Continued.) ========================================+=================+=================+================== | 20 cm. | 21 cm. | 24 cm. +--------+--------+--------+--------+--------+--------- | Of 30 | Of 35 | Of 30 | Of 35 | Of 30 | Of 35 | calib. | calib. | calib. | calib. | calib. | calib. |length. | length.| length.| length.| length.|length. ----------------------------------------+--------+--------+--------+--------+--------+--------- Calibre mm| 200 | 200 | 209.3 | 209.3 | 240 | 240 Total length ” | 6000 | 7000 | 6280 | 7330 | 7200 | 8400 Length of bore ” | 5425 | 6425 | 5670 | 6720 | 6480 | 7680 Weight of gun kg|11000 |12500 |12500 |14000 |19000 |21500 Weight of steel shell ” | 95 | 95 | 108 | 108 | 160 | 160 Battering charge ” | 40 | 40 | 45 | 45 | 65 | 65 Muzzle-velocity m | 575 | 605 | 575 | 605 | 575 | 605 ----------------------------------------+--------+--------+--------+--------+--------+--------- total mt| 1600 | 1773 | 1820 | 2014.8 | 2700 | 2985 Energy per cm. of circumference ” | 25.5 | 28.25| 27.68| 30.64| 35.8 | 39.6 per cm². of cross section ” | 5.1 | 5.65| 5.29| 5.86| 5.96| 6.6 per 1000 kg of weight of gun ” | 145.5 | 142 | 145.6 | 144 | 142 | 139 ----------------------------------------+--------+--------+--------+--------+--------+--------- of 500 m m | 539.5 | 567.5 | 541 | 568.8 | 544 | 572.5 Remaining velocity ” 1000 ” ” | 505 | 532 | 509 | 535.2 | 514.7 | 541.5 of steel ” 1500 ” ” | 474.5 | 498.7 | 479 | 503.3 | 487 | 512.6 shell ” 2000 ” ” | 445.5 | 468 | 451.5 | 473.8 | 461 | 485 ” 2500 ” ” | 419 | 439.7 | 426.4 | 447 | 437.5 | 459.3 ----------------------------------------+--------+--------+--------+--------+--------+--------- ” 500 ” mt| 1409.4 | 1559.5 | 1611.1 |1780.9 | 2415 | 2673 ” 1000 ” ” | 1237.4 | 1370.5 | 1426.1 |1576.7 | 2165 | 2391.4 total ” 1500 ” ” | 1090.3 | 1204.3 | 1263 |1394.4 | 1934.2 | 2143 ” 2000 ” ” | 961.1 | 1060.6 | 1122.2 |1235.7 | 1732 | 1918.4 ” 2500 ” ” | 850.1 | 936.2 | 1000.8 |1099.8 | 1561 | 1720.5 --------------------------------+--------+--------+--------+--------+--------+--------- ” 500 ” ” | 22.43| 24.82| 24.50| 27.09 | 32.01| 35.45 per cm. ” 1000 ” ” | 19.69| 21.81| 21.69| 23.98 | 28.65| 31.72 Energy of ” 1500 ” ” | 17.35| 19.17| 19.21| 21.26 | 25.65| 28.42 circumference ” 2000 ” ” | 15.30| 16.88| 17.07| 18.79 | 22.99| 25.44 ” 2500 ” ” | 13.53| 14.90| 15.22| 16.73 | 20.71| 22.82 --------------------------------+--------+--------+--------+--------+--------+--------- ” 500 ” ” | 4.49| 4.96| 4.68| 5.18 | 5.34| 5.91 per cm² ” 1000 ” ” | 3.94| 4.36| 4.15| 4.58 | 4.78| 5.29 of cross ” 1500 ” ” | 3.47| 3.83| 3.67| 4.05 | 4.28| 4.74 section ” 2000 ” ” | 3.06| 3.38| 3.26| 3.59 | 3.83| 4.24 ” 2500 ” ” | 2.71| 2.98| 2.91| 3.20 | 3.45| 3.80 ----------------------------------------+--------+--------+--------+--------+--------+--------- at the muzzle at | | | | | | When striking a distance cm| 40.5 | 43.5 | 42 | 45 | 47.5 | 51 at right angles of 500 m ” ”| 36.5 | 39.5 | 38 | 41 | 43.5 | 47 the steel shell ” 1000 ” ” ”| 33 | 36 | 35 | 37.5 | 40 | 43.5 penetrates a ” 1500 ” ” ”| 30 | 32.5 | 31.5 | 34 | 37 | 40 wrought Iron-Plate ” 2000 ” ” ”| 27.5 | 29.5 | 29 | 31 | 34 | 36.5 of the following ” 2500 ” ” ”| 25 | 27 | 26.5 | 28.5 | 31.5 | 34 thickness | | | | | | ----------------------------------------+--------+--------+--------+--------+--------+--------- at the muzzle at | | | | | | a distance cm|25 + 23 |25 +26.5|25 +24.5|25 +28.5|30 +26.5|30 + 31 Or two plates of of 500 m ” ”|25 +18.5|25 + 22 |25 + 20 |25 +23.5|30 +21.5|30 + 26 the following ” 1000 ” ” ”|25 + 14 |25 + 18 |25 + 16 |25 +19.5|30 +17.5|30 + 21.5 thickness ” 1500 ” ” ”|25 + 10 |25 + 13 |25 + 12 |25 + 15 |30 + 13 |30 + 17 ” 2000 ” ” ”|25 + 5.5|25 + 9 |25 + 8 |25 + 11 |30 + 8.5|30 + 12.5 ” 2500 ” ” ”|25 + 0 |25 + 4.5|25 + 4 |25 + 4 |30 + 3.5|30 + 8 ----------------------------------------+--------+--------+--------+--------+--------+--------- KRUPP’S CAST-STEEL COAST AND NAVAL GUNS OF 30 AND 35 CALIBRES LENGTH.—(Continued.) =======================================+==================+=================+================== | 26 cm. | 28 cm. | 30½ cm. +---------+--------+--------+--------+--------+--------- | Of 30 | Of 35 | Of 30 | Of 35 | Of 30 | Of 35 | calib. | calib. | calib. | calib. | calib. | calib. |length. | length.|length. | length.| length.|length. ---------------------------------------+---------+--------+--------+--------+--------+--------- Calibre mm| 260 | 260 | 280 | 280 | 305 | 305 Total length ”| 7800 | 9100 | 8400 | 9800 | 9150 |10700 Length of bore ”| 7020 | 8320 | 7560 | 8960 | 8220 | 9770 Weight of gun kg|25000 |28100 |33200 |37300 |42900 |48400 Weight of steel shell ”| 205 | 205 | 255 | 255 | 329 | 329 Battering charge ”| 83 | 83 | 103 | 103 | 132 | 132 Muzzle-velocity m| 575 | 605 | 575 | 605 | 575 | 605 ---------------------------------------+---------+--------+--------+--------+--------+--------- total mt| 3454.5 | 3824.4 | 4297 | 4757.3 | 5544.2 | 6137.9 Energy per cm. of circumference ”| 42.29 | 46.82| 48.85| 54.08| 57.86| 64.05 per cm². of cross section ”| 6.51 | 7.20| 6.98| 7.73| 7.59| 8.40 per 1000 kg of weight of gun ”| 138 | 136 | 129.5 | 127.5 | 129 | 127 ---------------------------------------+---------+--------+--------+--------+--------+--------- of 500 m m| 546.8 | 575.3 | 548.6 | 577.3 | 550.7 | 579.4 Remaining velocity ” 1000 ” ”| 519.9 | 547 | 523.5 | 550.8 | 527.4 | 554.9 of steel ” 1500 ” ”| 494.4 | 520.1 | 499.4 | 525.5 | 505.1 | 531.5 shell ” 2000 ” ”| 470.1 | 494.6 | 476.5 | 501.4 | 483.8 | 509 ” 2500 ” ”| 447 | 470.3 | 454.7 | 478.4 | 463.3 | 487.5 ---------------------------------------+---------+--------+--------+--------+--------+--------- ” 500 ” mt| 3123.5 | 3458 | 3912 | 4330.8 | 5085.3 | 5629.9 ” 1000 ” ”| 2824.1 | 3126.5 | 3561.2 | 3942.5 | 4664.5 | 5164 total ” 1500 ” ”| 2553.5 | 2826.8 | 3242 | 3589.1 | 4278.5 | 4736.7 ” 2000 ” ”| 2308.7 | 2556 | 2951.3 | 3267.3 | 3924.4 | 4334.7 ” 2500 ” ”| 2087.5 | 2311.3 | 2686.7 | 2974.4 | 3599.6 | 3083 -------------------------------+---------+--------+--------+--------+--------+--------- per cm. ” 500 ” ”| 38.24 | 42.33| 44.47| 49.23| 49.23| 58.75 of ” 1000 ” ”| 34.57 | 38.28| 40.48| 44.82| 48.68| 53.89 Energy circumfer- ” 1500 ” ”| 31.26 | 34.61| 36.85| 40.80| 44.65| 49.43 ence ” 2000 ” ”| 28.26 | 31.29| 33.55| 37.14| 40.96| 45.34 ” 2500 ” ”| 25.56 | 28.29| 30.62| 33.81| 37.57| 41.59 -------------------------------+---------+--------+--------+--------+--------+--------- ” 500 ” ”| 5.88 | 6.51| 6.35| 7.03| 6.96| 7.71 per cm² ” 1000 ” ”| 5.32 | 5.89| 5.78| 6.40| 6.38| 7.07 of cross ” 1500 ” ”| 4.81 | 5.32| 5.27| 5.83| 5.86| 6.48 section ” 2000 ” ”| 4.35 | 4.81| 4.79| 5.31| 5.37| 5.95 ” 2500 ” ”| 3.93 | 4.35| 4.37| 4.83| 4.82| 5.45 ---------------------------------------+---------+--------+--------+--------+--------+--------- at the muzzle at | | | | | | When striking a distance cm| 51.5 | 56 | 55.5 | 60 | 60.5 | 65 at right angles of 500 m ” ”| 48 | 51.5 | 51.5 | 56 | 56.5 | 61 the steel shell ” 1000 ” ” ”| 44.5 | 48 | 48 | 52 | 53 | 56.5 penetrates a ” 1500 ” ” ”| 41.5 | 44.5 | 44.5 | 48.5 | 49.5 | 53.5 wrought Iron-Plate ” 2000 ” ” ”| 38 | 41.5 | 41.5 | 45 | 46.5 | 50 of the following ” 2500 ” ” ”| 35.5 | 38 | 38.5 | 42 | 43 | 47 thickness | | | | | | ---------------------------------------+---------+--------+--------+--------+--------+--------- at the muzzle at | | | | | | a distance cm|35 + 26.5|35 +31.5|38 +26.5|38 +32.5|40 + 34 |40 + 37 Or two plates of of 500 m ” ” |35 + 21.5|35 +26.5|38 + 23 |38 + 27 |40 +26.5|40 + 32.5 the following ” 1000 ” ” ” |35 + 17 |35 +21.5|38 + 18 |38 +23.5|40 +21.5|40 + 27.5 thickness ” 1500 ” ” ” |35 + 12.5|35 +17 |38 + 13 |38 +18.5|40 + 17 |40 + 23 ” 2000 ” ” ” |35 + 7.5|35 +12.5|38 + 8 |38 +13.5|40 + 13 |40 + 18 ” 2500 ” ” |35 + 2 |35 + 7.5|38 + 2.5|38 + 8.5|40 + 7 |40 + 13.5 ---------------------------------------+---------+--------+--------+--------+--------+---------- KRUPP’S CAST-STEEL COAST AND NAVAL GUNS OF 30 AND 35 CALIBRES LENGTH.—(Continued.) =======================================+==================+================== | 35½ cm. | 40 cm. +---------+--------+--------+-------- | Of 30 | Of 35 | Of 30 | Of 35 | calib. | calib. | calib. | calib. |length. | length.|length. | length. ---------------------------------------+---------+--------+--------+--------- Calibre mm| 355 | 355 | 400 | 400 Total length ”|10650 |12400 |12000 | 14000 Length of bore ”| 9510 |11260 |10700 | 12700 Weight of gun kg|68000 |76500 |97200 |109500 Weight of steel shell ”| 525 | 525 | 740 | 740 Battering charge ”| 210 | 210 | 295 | 295 Muzzle-velocity m| 575 | 605 | 575 | 605 ---------------------------------------+---------+--------+--------+--------- total mt| 8847 | 9794.5 |12470 | 13805 Energy per cm. of circumference ”| 79.33 | 87.82| 99.23| 109.86 per cm². of cross section ”| 8.94 | 9.90| 9.92| 10.99 per 1000 kg of weight of gun ”| 129 | 127 | 128.5 | 126.5 ---------------------------------------+---------+--------+--------+--------- of 500 m m| 554.3 | 583.2 | 556.3 | 585.4 Remaining velocity ” 1000 ” ”| 534.3 | 562.2 | 538.2 | 566.3 of steel ” 1500 ” ”| 515.1 | 542 | 520.8 | 547.9 shell ” 2000 ” ”| 496.6 | 522.5 | 503.8 | 530.1 ” 2500 ” ”| 478.7 | 503.6 | 487.5 | 512.9 ---------------------------------------+---------+--------+--------+--------- ” 500 ” mt| 8221.5 | 9101.8 |11673 | 12923 ” 1000 ” ”| 7640.2 | 8458.2 |10927 | 12097 total ” 1500 ” ”| 7099.8 | 7860.2 |10228 | 11323 ” 2000 ” ”| 6598 | 7304.3 | 9574.6 | 10599 ” 2500 ” ”| 6131.3 | 6787.8 | 8962.6 | 9922.3 -------------------------------+---------+--------+--------+--------- ” 500 ” ”| 73.72 | 81.61| 92.89| 102.84 per cm. ” 1000 ” ”| 68.50 | 75.84| 86.95| 96.26 of ” 1500 ” ”| 63.66 | 70.48| 81.40| 90.11 Energy circumfer- ” 2000 ” ”| 59.16 | 65.49| 76.19| 84.35 ence ” 2500 ” ”| 54.97 | 60.86| 71.32| 78.96 -------------------------------+---------+--------+--------+--------- ” 500 ” ”| 8.31 | 9.20| 9.29| 10.28 per cm² ” 1000 ” ”| 7.72 | 8.55| 8.70| 9.63 of cross ” 1500 ” ”| 7.17 | 7.94| 8.14| 9.01 section ” 2000 ” ”| 6.67 | 7.38| 7.62| 8.44 ” 2500 ” ”| 6.19 | 6.86| 7.13| 7.90 ---------------------------------------+---------+--------+--------+--------- at the muzzle at | | | | When striking a distance cm| 70.5 | 76.5 | 79 | 85.5 at right angles of 500 m ” ”| 67 | 72.5 | 75 | 81 the steel shell ” 1000 ” ” ”| 63.5 | 68.5 | 71.5 | 77 penetrates a ” 1500 ” ” ”| 60 | 64.5 | 68 | 73 wrought Iron-Plate ” 2000 ” ” ”| 57 | 61 | 65 | 70 of the following ” 2500 ” ” ”| 54 | 58 | 62 | 66.5 thickness | | | | ---------------------------------------+---------+--------+--------+--------- at the muzzle at | | | | a distance cm|50 + 34 |50 +40.5|60 +32.5|60 + 41 of 500 m ” ”|50 + 29 |50 +35.5|60 +27.5|60 + 35.5 Or two plates of ” 1000 ” ” ”|50 + 24 |50 +30.5|60 +22.5|60 + 30.5 the following ” 1500 ” ” ”|50 + 19 |50 + 26 |60 +17.5|60 + 25.5 thickness ” 2000 ” ” ”|50 + 14.5|50 + 21 |60 + 12 |60 + 20 ” 2500 ” ” ”|50 + 9 |50 + 16 |60 + 5.5|60 + 15 ---------------------------------------+---------+--------+--------+--------- INDEX. Alabama and Hatteras, duel, 170 Kearsarge, ” , 171 Architectural Development—Unarmored fleets, 361 Conditions affecting English, 361 French, 362 United States, 362 Chart of, 372 Armored fleets, 386 Argentine Confederation Fleets, Table of, 3 Description of, 4 Ordnance, Description of, 180 Type of small-arms used, 311 Personnel, 399 Armor—Table of penetration of English guns, 319 French ” , 321 German ” , 320 Krupp’s new long guns, 435 Application of, 395 Armstrong Breech-loaders, Table of measurements of, 182 Description of, 193, 194 Muzzle-loaders, Description of, 192-194 Projectiles, 209 Fuses, 211 Grooves, 192 Assaults—Fort Sumter, 160 ” Fisher, 160 Corean Forts, 161 Assimilated Rank—Grades of Austrian officers, 402 Brazilian officers, 406 English officers, 410 French officers, 416 United States officers, 431 Atlanta and Weehawken, duel, 171 Austrian Fleets, Armored, Table of, 5 General-service, Table of, 9 Armored vessels, Ratios of elements, 390 Ordnance, Table of, 177 Description of, 180 Types and calibres of, 317 Personnel, Departmental organization of, 400 Names of grades, 400 Inscription and instruction, 401 Relative rank, 402 Cadre, 400 Austrian cruising stations, 405 Budgets, 434 Bellerophon, Construction of iron hull of, 382 Boat-carriages—English, 197 French, 235 German, 263 United States, 289 Bombardments—Callao, 149 Danube Earthworks, 149 Fort Darling, 142 Donelson, 142 Fisher, 147 Henry, 140 Hindman, 144 Jackson and St. Philip, 152 McAllister, 147 Sumter, 151 Wagner, 146 Grand Gulf Earthworks, 144 Hatteras Inlet, 139 Hilton Head, 140 Kagosima, 146 Roanoke Island, 141 Simonoseki, 145 Bouvet and Meteor, duel, 172 Brazil, Construction of iron hull of, 380 Brazilian Fleet, Armored, Table of, 10 Description of, 11 Unarmored, Table of, 12 Ordnance, Description of, 180 Types and calibres of, 317 Personnel, Departmental organization of, 405 Grades and relative rank, 406 Cadre, 407 Cruising stations, 407 Budget, 434 Breech-loaders—Armstrong, 193 French, model 1870, 225 model 1864, 228 Finspong, 276 German, 244 Krupp’s new long guns, table of measurements, 435 United States, 285 Whitworth, 218 Breech Mechanism—Armstrong, original, 193 improved, 195 French, model 1870, 226 model 1864, 229 Hotchkiss revolving cannon, 306 Gatling machine-gun, 309 Krupp cylindro-prismatic, 246 Small-arms, 311 United States, 287 Whitworth, 218 Brooks’s torpedo for harbor defence, 345 Brookwell broadside gun-carriage, 250 Cadre—Argentine Navy, 399 Austrian ” , 400 Brazilian ” , 407 Chilian ” , 407 Danish ” , 433 Dutch ” , 422 English ” , 411 French ” , 417 German ” , 419 Greek ” , 433 Italian ” , 424 Japanese ” , 425 Norwegian ” , 426 Portuguese ” , 433 Russian ” , 426 Spanish ” , 428 Swedish ” , 426 Turkish ” , 429 United States ” , 432 Cartridges—English, 207 French, 236 Charleston blockaders, Dash at, 166 Chart of architectural development, 372 Chilian Fleet, Armored, Table of, 13 Description of, 13 General-service, Table of, 13 Ordnance, Description of, 181 Types and calibres of, 317 Personnel, Departmental organization of, 407 Cadre, 407 Chinese Fleet, Table of, 16 Description of, 16 Ordnance, Description of, 181 Types and calibres of, 317 Personnel, 408 Compressors—Elswick, 201 Bow, 202 English hydraulic, 203-206 French friction, 231 Brookwell, 250 Vavasseur, 220 German hydraulic, 257-263 United States boat-carriage, 289 central recoil-check, 295 hydraulic, 296 Ericsson’s friction, 296 turret-carriage, 298 English wooden slide-carriage, 196 German boat-carriage, 264 Construction, Ship, Development of, 373 Wooden, 374 Diagonal, 375 Composite, 377 Iron, 379 Iron sheathed with wood, 384 Iron hull of Brazil, 380 Warrior, 381 Bellerophon, 382 Hercules, 383 Invincible, 383 Gun—Palliser, 217 Armstrong, 192 Whitworth, 218 Vavasseur, 219 Woolwich, 186 Krupp, 244 Finspong, 276 American smooth-bore, 283 Uchatius, 180 American converted, 285 French, 225 Cruising Stations, Squadron—Argentine, 400 Austrian, 405 Brazilian, 407 Dutch, 422 English, 412 French, 417 Italian, 424 Russian, 426 Spanish, 429 United States, 432 Dashes—Passes of the Mississippi, 165 Vicksburg (Arkansas passing Farragut’s fleet), 166 Charleston blockading fleet, 166 Monitor and Merrimac, 170 Alabama and Hatteras, 170 Weehawken and Atlanta, 171 Kearsarge and Alabama, 171 Meteor and Bouvet, 172 Denmark Fleet, Armored, 17 General-service, 18 Ordnance, Description of, 181 Types and calibres of, 317 Personnel, Departmental organization of, 433 Budgets, 434 Directing-bar Carriage—French, 234 United States, 293 Distinguishing marks of English projectiles, 216 Distribution of armor, 395 Elevating-gear—Woolwich rack and pinion, 201 boat-gun, 197 hydraulic, 205 French, 231, 233, 234 German rack and pinion, 252 boat-gun, 250 United States boat-gun, 289 breech-loader, 293 smooth-bore, 293 Hotchkiss revolving cannon, 306 Gatling machine-gun, 308 English Fleet, Armored, Table of, 20 Description of, 23 Fast cruisers, Table of, 36 Description of, 42 General-service, Table of, 48 Ordnance, Table of measurements of, 182 Description of, 186 Types and calibres of, 317 Revolving turret, 358 Conditions affecting architectural development, 361 Ratios of elements of iron-clad vessels, 390 English Personnel—Departmental organization, 408 Dock-yards, 409 Enlistment, 409 Grades and relative rank, 410 Coast-guard, 411 Cadre, 411 Royal Naval College, 411 Gunnery and torpedo instruction, 411 Naval reserve, 411 Probationary course of young officers, 412 Indian navy, 412 Cruising stations, 412 Budgets, 434 Ericsson—Torpedo vessel, 338 Development of Monitor, 386 Turret gun-carriage, 298 Broadside slide-carriage, 297 Revolving turret, 357 Field-carriages—United States, 289 English, 196 French, 236 German, 264 Finspong breech-loader, 276 Fleets—Architectural development of armored, 389 unarmored, 361 Argentine, 3 Austrian, 5 Brazilian, 10 Chilian, 13 Chinese, 16 Danish, 17 Dutch, 84 English, 20 French, 51 German, 73 Greek, 82 Italian, 90 Japanese, 96 Norwegian, 99 Peruvian, 103 Portuguese, 104 Russian, 106 Spanish, 116 Swedish, 99 Turkish, 121 United States, 128 French Fleet, Armored, Table of, 51 Description of, 55 Rapid cruisers, Table of, 62 Description of, 65 General-service, Table of, 70 Ordnance, Table of measurements of, 221 Description of, 225 Types and calibres of, 317 Towing torpedo, 333 Revolving turret, 359 Barbette fixed turret, 360 Conditions affecting architectural development, 362 Ratio of elements of iron-clad vessels, 390 Wooden hulls, superiority over English iron ones, 392 Personnel—Departmental organization, 412 Maritime prefectures, 414 Enlistment and inscription, 415 Grades and assimilated rank, 416 Official reports, 416 Promotion, 417 Cadre, 417 Cruising stations, 417 Budgets, 434 Fuses—Boxer time, 211 Armstrong time, 211 Pettman percussion, 212 French percussion, 238 time, 238 German percussion, 266 Krupp time, 267 United States Navy time, 302 Bormann time, 303 Boxer time, 303 Schenkl percussion, 304 Torpedo time, 347 McEvoy’s time, 347 percussion, 348 Hill’s chemical, 348 friction, 348 sulphuric-acid, 349 Harvey’s chemical, 349 electric, 349 Gas-checks—Woolwich projectile, 210 French, 227-229 Armstrong, original, 194 improved, 195 Broadwell, 246-248 Gatling machine-gun, 308 General Actions—Memphis, 163 Heligoland, 163 Lissa, 164 Point Tetas, 173 German Fleets, Armored, Table of, 73 Description of, 75 Fast cruisers, Table of, 80 General-service, Table of, 81 Ordnance, Table of measurements, 241 Description of, 244 Types and calibres of, 317 Ratios of elements of iron-clad vessels, 390 Personnel—Departmental organization, 418 Inscription, 419 Cadre, 419 Grades, 419 Fleet divisions, 421 Budgets, 434 Grades—Officers of navy of Argentine Confederation, 399 Austria, 400 Brazil, 406 England, 410 France, 416 Germany, 419 Holland, 421 Italy, 422 Spain, 427 United States, 431 Grand Gulf, Bombardment of earthworks of, 144 Greek Fleet, Table of, 82 Description of, 83 Ordnance, Description of, 272 Types and calibres of, 317 Departmental organization, 433 Budgets, 434 Grooves—French, 187 French modified, 187 Woolwich, 187 English plain, 187 Armstrong, for breech-loader, 192 shunt, 192 French, model 1870, 228 Krupp, 245 Parrott, 288 Dahlgren, 288 Whitworth, 219 Guns—Muzzle-loaders: Woolwich, 186 English converted, 189 Armstrong, 192-194 French, 229 United States smooth-bore, 283 converted, 285 Parrott, 285 Breech-loaders: Armstrong, original, 193 improved, 195 French, model 1870, 225 model 1864-1871, 228 Krupp, government pattern, 244 new long, 435 Finspong, 276 United States, 287 Penetration of English, in armor targets, 319 German, ” ” , 320 French, ” ” , 321 Krupp’s new long, 435 Gun-carriages—Field: English, 196 French, 236 German, 264 United States, 289 Boat: English, 197 French, 235 German, 263 United States, 289 Turret: English, 203 French, 232 German, 263 Razkazoff depression, 279 Ericsson’s, 298 Broadside: French slide, 230 directing-bar, 234 Vavasseur, 220 German Brookwell, 249 slide, 254 German half-slide, 259 United States Marsilly, 292 directing-bar, 293 slide, 296 Ericsson’s slide, 296 United States friction-drum, 299 Mitrailleuse: French, 236 Hotchkiss, 306 Gatling, 308 French centre pivot, 233 German ” ” , 260 United States pivot, 295 Gun-locks—United States cannon, 305 Gatling, 309 Gunpowder—English, 206 French, 236 German, 265 United States, 299 Harvey towing torpedo, 331 Hatteras Inlet, Bombardment of, 139 Heligoland, Action off, 163 Hercules, Construction of iron hull of, 383 Herreshoff torpedo-boat, 341 Hilton Head, Bombardment of, 140 Holland Fleet, Armored, Table of, 84 Description of, 86 Unarmored, Table of, 88 Ordnance, Description of, 272 Types and calibres of, 317 Personnel—Departmental organization, 421 Grades, 421 Cadre, 422 Cruising stations, 422 Budgets, 434 Hotchkiss machine-gun, 305 projectiles, 306 magazine rifle, 315 Hydraulic Compressors—English, 203-206 German, 257-263 United States, 296 Loading apparatus, English, 205 Gun-lift, English, 205 Inscription, Maritime—Austrian, 401 French, 415 German, 419 Italian, 423 Japanese, 425 Spanish, 429 Invincible, Construction of iron hull of, 383 Iron-clads _versus_ wooden vessels Hampton Roads, 167 Roanoke River, 167 Albemarle Sound, 168 Black Sea, 168 Ylo, 169 Iquique Harbor, 169 Italian Fleet, Armored, Table of, 90 Description of, 91 Fast cruisers, Table of, 94 General-service, Table of, 95 Italian Ordnance, Table of measurements of, 269 Description of, 272 Types and calibres of, 317 Personnel—Departmental organization, 422 Grades, 422 Inscription, 423 Cadre, 424 Budgets, 434 Japanese Fleets, Armored, Table of, 96 Description of, 97 Unarmored, Table of, 97 Ordnance, Description of, 272 Types and calibres of, 318 Personnel—Departmental organization, 424 Dock-yards, 424 Cadre, 425 Inscription and enlistment, 425 Budgets, 434 Kagosima, Bombardment of, 146 Kearsarge and Alabama, duel, 171 Krupp Guns—Standard German, Measurements of, 242 New long guns of 30 to 35 calibres, 435 Description of standard German, 244 Groove, 245 Lay’s torpedo, 329 Lewis’s torpedo, 343 Lissa, Battle of, 164 Loading-gear, English hydraulic, 205 Loading-plate—French, 239 German, 249 United States, 287 Machine-guns—Gatling, 308 Hotchkiss, 305 Nordenfeldt, 276 Palmcrantz, 276 Marine Infantry and Artillery—Argentine, 399 Brazilian, 407 Chilian, 407 Dutch, 422 English, 411 French, 417 German, 420 Italian, 424 Spanish, 428 Turkish, 429 United States, 432 Memphis, Action off, 163 Menzing towing-torpedo, 333 Meteor and Bouvet, duel, 172 Mitrailleuse, French, 230 Monitor and Merrimac, duel, 170 Muzzle-loading Guns—Woolwich, 186 Armstrong, 192 Whitworth, 218 Vavasseur, 219 French, 229 United States smooth-bore, 283 rifles, 285 Nipping-gear, Scott’s, 202 French, 233 German, 255 Vavasseur, 220 Nordenfeldt machine-gun, 276 Norwegian Fleet, Armored, Table of, 99 Description of, 100 Unarmored, Table of, 101 Ordnance, Table of measurements of, 273 Description of, 276 Types and calibres of, 318 Personnel—Departmental organization, 425 Enlistment, 425 Cadre, 426 Budgets, 434 Ordnance—Argentine, 180 Austrian, 177, 317 Brazilian, 180, 317 Chilian, 181, 317 Chinese, 181, 317 Danish, 181, 317 Dutch, 272, 317 English, 182, 317 French, 221, 317 German, 241, 317 Greek, 272, 317 Italian, 269, 317 Japanese, 272, 318 Norwegian, 273, 318 Peruvian, 279, 318 Portuguese, 279, 318 Russian, 277, 318 Spanish, 280, 318 Swedish, 273, 318 Turkish, 280, 318 United States, 281, 318 Palliser gun-construction, 217 projectiles, 208 Palmcrantz machine-gun, 276 Passage of Forts—Jackson and St. Philip, 154 Vicksburg (up stream), 156 (down stream), 159 Port Hudson Earthworks, 156 Morgan, 157 Passes of the Mississippi, dash, 165 Penetration of Armor—English guns, 319 French ” , 321 German ” , 320 Krupp’s new 30 and 35 calibre guns, 435 Personnel—Argentine Confederation, 399 Austrian, 400 Brazilian, 405 Chilian, 407 Chinese, 408 Danish, 433 Dutch, 421 English, 408 French, 412 German, 418 Greek, 433 Italian, 422 Japanese, 424 Norwegian, 425 Peruvian, 433 Portuguese, 433 Russian, 426 Spanish, 427 Swedish, 425 Turkish, 429 United States, 430 Peruvian Fleet, Description of, 103 Ordnance, Description of, 279 Types and calibres of, 318 Personnel, Departmental organization of, 433 Point Tetas, Action off, 173 Portuguese Fleet—Armored corvette, 104 Unarmored fleet, Table of, 105 Ordnance, Description of, 279 Types and calibres of, 318 Personnel—Departmental organization, 433 Cadre, 433 Cruising stations, 433 Budgets, 434 Primers—English friction, 212 electric, 213 French percussion, 239 friction, 239 German friction, 267 United States percussion, 304 friction, 304 Projectiles—Distinguishing marks of English, 216 Woolwich, 208 Palliser, 209 Armstrong segment, 209 German ” , 265 Whitworth, 219 French, 237 German, 265 United States, 299 Hotchkiss, 306 Ratios of elements of iron-clad vessels, Table of, 390 Razkazoff depression gun-carriage, 279 Roanoke Island, Bombardment of, 141 Russian Fleet, Armored, Table of, 106 Description of, 108 General-service, Table of, 112 Ordnance, Table of measurements of, 277 Description of, 279 Types and calibres of, 318 Personnel—Departmental organization, 426 Inscription, 426 Fleet divisions, 426 Budgets, 434 Scott’s gun-carriage, 200 nipping-gear, 202 Sights—English, 213 French, 239 German, 267 United States, 305 Simonoseki, Bombardment of, 145 Singer’s torpedo for harbor defence, 346 Slides—English upper-deck gun, 198 ordinary broadside, 199 heavy broadside, 200 turret, 205 French ordinary broadside, 232 heavy broadside, 231 barbette turret, 232, 360 centre pivot, 234 German broadside, 251 heavy pivot, 257 half ” , 259 centre ” , 260 United States ordinary pivot, 295 heavy broadside, 296 turret, 298 Slide-rollers—French, 232 German, 255 Small-arms—Snider, 311 Tabatière, 311 Krnka, 312 Springfield, 312 Peabody-Martini, 313 Werndl, 313 Mauser, 314 Le Gras, 314 Berdan, 315 Hotchkiss magazine, 315 Remington, 315 Spanish Fleet, Armored, Table of, 116 Description of, 117 Unarmored, Table of, 118 Description of, 120 Ordnance, Description of, 280 Types and calibres of, 318 Personnel—Departmental organization, 427 Grades, 427 Cadre, 428 Inscription, 429 Cruising stations, 429 Budgets, 434 Sumter, Bombardment of, 151 Assault of, 160 Swedish Fleet, Armored, Table of, 99 Description of, 100 Unarmored, Table of, 101 Ordnance, Table of measurements of, 273 Description of, 276 Types and calibres of, 318 Personnel—Departmental organization, 425 Enlistment, 425 Cadre, 426 Budgets, 434 Thorneycroft torpedo-boat, 339 Torpedoes—Whitehead, 325 Lay, 329 Harvey towing, 331 Menzing ” , 333 French towing, 333 American spar, 334 Wood and Lay’s spar, 335 Lewis’s drifting, 343 Frame, 345 Brooks’s channel, 345 Singer’s ” , 346 Barrel ” , 346 Clearing channels of, 350 Torpedo Boats—Thorneycroft, 339 Yarrow, 340 Herreshoff, 341 Submarine, 343 Launches, 342 Vessels—Pietro Micca, 94, 336 Rau, 102, 337 Vesuvius, 47, 337 Ziethen, 337 Uzreef, 337 Alarm, 130, 337 Intrepid, 129, 338 Destroyer, 338 Uhlan, 339 Fuses—Time, 347 McEvoy’s time, 347 Hill’s, 348 McEvoy’s percussion, 348 Friction, 348 Sulphuric-acid, 349 Harvey’s, 349 Electric, 349 Actions—Shah and Huascar, 351 Russian boats off Batoum, 351 Constantine and Turkish vessel, 352 Cushing’s attack on Albemarle, 352 Russian attack on Duba Saife, 352 at Sulina, 352 Rustchuk, 353 Soukum Kaleh, 353 Confederate attack on Minnesota, 353 Housatonic, 353 Training-gear—German windlass, 253 for cabin carriage, 254 heavy slides, 256 English windlass, 200 rack and pinion, 200 French rack and pinion, 231 barbette slide, 232 centre pivot, 234 United States rack and pinion, 296 Turkish Fleet, Armored, Table of, 121 Description of, 123 Unarmored, Table of, 125 Ordnance, Description of, 280 Types and calibres of, 318 Personnel—Departmental organization, 429 Inscription, 429 Cadre, 429 Budget, 434 Turret—United States monitor, 357 English revolving, 358 French ” , 359 barbette, 360 Carriages: French, 232 English, 203 German, 263 United States, 298 Uchatius gun-construction, 180 United States Fleet, Armored, Table of, 128 Description of, 129 Unarmored, Table of, 131 Description of, 134 Ordnance, Table of measurements of, 281 Description of, 283 Types and calibres of, 318 Conditions affecting architectural development, 362 Ratios of elements of monitor Onondaga, 391 Monitor turret, 357 Personnel—Departmental organization, 430 Dock-yards, 430 Grades and assimilated rank, 431 Cadre, 432 Enlistment, 432 Cruising station, 432 Budgets, 434 Spar-torpedo, 334 Vavasseur construction, 219 compressor, 220 nipping-gear, 220 Vents—French, 227 Armstrong B. L., 193 German, 248 United States, 287 Vent-guards, French, 240 Vicksburg, Dash of the Arkansas past Farragut’s fleet, 166 Wads—English papier maché, 210 French sea-weed, 238 Warrior, Construction of iron hull of, 381 Weehawken and Atlanta, duel, 171 Whitehead torpedo, 325 Whitworth gun-construction, 218 groove, 219 projectiles, 219 breech mechanism, 218 Windlass for in and out gear—English, 200 German, 253 Wood scale, English, 213, 216 Woolwich—Description of guns, 186 Measurements of guns, 182 Groove, 187 Projectiles, 208 Yarrow torpedo-boat, 340 *** END OF THE PROJECT GUTENBERG EBOOK NAVIES OF THE WORLD *** Updated editions will replace the previous one—the old editions will be renamed. Creating the works from print editions not protected by U.S. copyright law means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for an eBook, except by following the terms of the trademark license, including paying royalties for use of the Project Gutenberg trademark. If you do not charge anything for copies of this eBook, complying with the trademark license is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. Project Gutenberg eBooks may be modified and printed and given away—you may do practically ANYTHING in the United States with eBooks not protected by U.S. copyright law. Redistribution is subject to the trademark license, especially commercial redistribution. START: FULL LICENSE THE FULL PROJECT GUTENBERG LICENSE PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK To protect the Project Gutenberg™ mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase “Project Gutenberg”), you agree to comply with all the terms of the Full Project Gutenberg™ License available with this file or online at www.gutenberg.org/license. Section 1. General Terms of Use and Redistributing Project Gutenberg™ electronic works 1.A. By reading or using any part of this Project Gutenberg™ electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg™ electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg™ electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8. 1.B. “Project Gutenberg” is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg™ electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg™ electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg™ electronic works. See paragraph 1.E below. 1.C. The Project Gutenberg Literary Archive Foundation (“the Foundation” or PGLAF), owns a compilation copyright in the collection of Project Gutenberg™ electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is unprotected by copyright law in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg™ mission of promoting free access to electronic works by freely sharing Project Gutenberg™ works in compliance with the terms of this agreement for keeping the Project Gutenberg™ name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg™ License when you share it without charge with others. 1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg™ work. The Foundation makes no representations concerning the copyright status of any work in any country other than the United States. 1.E. Unless you have removed all references to Project Gutenberg: 1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg™ License must appear prominently whenever any copy of a Project Gutenberg™ work (any work on which the phrase “Project Gutenberg” appears, or with which the phrase “Project Gutenberg” is associated) is accessed, displayed, performed, viewed, copied or distributed: This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook. 1.E.2. If an individual Project Gutenberg™ electronic work is derived from texts not protected by U.S. copyright law (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase “Project Gutenberg” associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg™ trademark as set forth in paragraphs 1.E.8 or 1.E.9. 1.E.3. If an individual Project Gutenberg™ electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg™ License for all works posted with the permission of the copyright holder found at the beginning of this work. 1.E.4. Do not unlink or detach or remove the full Project Gutenberg™ License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg™. 1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg™ License. 1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg™ work in a format other than “Plain Vanilla ASCII” or other format used in the official version posted on the official Project Gutenberg™ website (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original “Plain Vanilla ASCII” or other form. Any alternate format must include the full Project Gutenberg™ License as specified in paragraph 1.E.1. 1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg™ works unless you comply with paragraph 1.E.8 or 1.E.9. 1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg™ electronic works provided that: • You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg™ works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg™ trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, “Information about donations to the Project Gutenberg Literary Archive Foundation.” • You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg™ License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg™ works. • You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work. • You comply with all other terms of this agreement for free distribution of Project Gutenberg™ works. 1.E.9. If you wish to charge a fee or distribute a Project Gutenberg™ electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from the Project Gutenberg Literary Archive Foundation, the manager of the Project Gutenberg™ trademark. Contact the Foundation as set forth in Section 3 below. 1.F. 1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread works not protected by U.S. copyright law in creating the Project Gutenberg™ collection. Despite these efforts, Project Gutenberg™ electronic works, and the medium on which they may be stored, may contain “Defects,” such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment. 1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right of Replacement or Refund” described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg™ trademark, and any other party distributing a Project Gutenberg™ electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE. 1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem. 1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. 1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions. 1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg™ electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg™ electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg™ work, (b) alteration, modification, or additions or deletions to any Project Gutenberg™ work, and (c) any Defect you cause. Section 2. Information about the Mission of Project Gutenberg™ Project Gutenberg™ is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life. Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg™’s goals and ensuring that the Project Gutenberg™ collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg™ and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation information page at www.gutenberg.org. Section 3. Information about the Project Gutenberg Literary Archive Foundation The Project Gutenberg Literary Archive Foundation is a non-profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation’s EIN or federal tax identification number is 64-6221541. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state’s laws. The Foundation’s business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up to date contact information can be found at the Foundation’s website and official page at www.gutenberg.org/contact Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation Project Gutenberg™ depends upon and cannot survive without widespread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine-readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS. The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit www.gutenberg.org/donate. While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate. International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff. Please check the Project Gutenberg web pages for current donation methods and addresses. Donations are accepted in a number of other ways including checks, online payments and credit card donations. To donate, please visit: www.gutenberg.org/donate. Section 5. General Information About Project Gutenberg™ electronic works Professor Michael S. Hart was the originator of the Project Gutenberg™ concept of a library of electronic works that could be freely shared with anyone. For forty years, he produced and distributed Project Gutenberg™ eBooks with only a loose network of volunteer support. Project Gutenberg™ eBooks are often created from several printed editions, all of which are confirmed as not protected by copyright in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition. Most people start at our website which has the main PG search facility: www.gutenberg.org. This website includes information about Project Gutenberg™, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.